[PATCH v4 3/7] Documentation: DT: update atmel SSC with DMA binding

[Richard Genoud]

As atmel-ssc can be used with DMA, the documentation should be updated.
Also, a configuration DMA example is given.

Signed-off-by: Richard Genoud <richard.genoud at gmail.com>
---
 .../devicetree/bindings/misc/atmel-ssc.txt         |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index 38e51ad..7c320da 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -6,10 +6,28 @@ Required properties:
 	- atmel,at91sam9g45-ssc: support dma transfer
 - reg: Should contain SSC registers location and length
 - interrupts: Should contain SSC interrupt
+For dma transfer:
+- dmas: DMA specifier, consisting of a phandle to DMA controller node,
+  the memory interface and SSC DMA channel ID (for tx and rx).
+  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+- dma-names: Must be "tx", "rx".
 
-Example:
+Examples:
 ssc0: ssc at fffbc000 {
 	compatible = "atmel,at91rm9200-ssc";
 	reg = <0xfffbc000 0x4000>;
 	interrupts = <14 4 5>;
 };
+
+
+ssc0: ssc at f0010000 {
+      compatible = "atmel,at91sam9g45-ssc";
+      reg = <0xf0010000 0x4000>;
+      interrupts = <28 4 5>;
+      dmas = <&dma0 1 13>,
+	     <&dma0 1 14>;
+      dma-names = "tx", "rx";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+      status = "disabled";
+};
-- 
1.7.10.4