[PATCH V3 1/2] tps6507x-ts: Add DT support
Manish Badarkhe
badarkhe.manish at gmail.com
Mon Jul 1 21:10:34 EST 2013
Hi Dmitry
On Wed, Jun 12, 2013 at 12:23 PM, Vishwanathrao Badarkhe, Manish <
manishv.b at ti.com> wrote:
> Hi Dmitry,
>
> On Mon, Jun 10, 2013 at 23:33:11, Dmitry Torokhov wrote:
>> Manish,
>>
>> On Mon, Jun 10, 2013 at 10:23:16AM +0000, Vishwanathrao Badarkhe, Manish
wrote:
>> > Hi Dmitry,
>> >
>> > On Mon, Jun 10, 2013 at 11:34:42, Dmitry Torokhov wrote:
>> > > Hi Manish,
>> > >
>> > > On Tue, May 21, 2013 at 02:24:17PM +0530, Vishwanathrao Badarkhe,
Manish wrote:
>> > >
>> > > > + struct touchscreen_init_data *init_data = NULL;
>> > > > + int err;
>> > > > +
>> > > > + if (node)
>> > > > + node = of_find_node_by_name(node, "tsc");
>> > >
>> > > Why do you have to locate OF node manually instead of already having
it attached to the device stucture?
>> >
>> > As TPS6507x is mfd device containing two nodes, regulator and
touchscreen.
>> > It is necessary to use "of_find_node_by_name" to find child "tsc" node
>> > of TPS6507x MFD device.
>>
>> I understand that TPS6507x is a MFD device, However, I still do not
understand why you do not attach OF data to the child platform device
representing touch screen when you create it.
>
> I gone through most of MFD devices in mainline kernel where
"of_find_node_by_name"
> function is used in order to populate child node properties.
> See below example of max8925 MFD device.
>
> Max8025 MFD device has following modules
> 1. Touch screen
> 2. Charger
> 3. Backlight
> 4. regulator
>
> In DT case, device node for max8925 MFD device is in
"arch/arm/boot/dts/mmp2-brownstone.dts"
> file having child nodes as regulator, backlight and charger.
> Respective drivers (regulator, backlight and charger) of max8925 MFD
device used
> "of_find_node_by_name" function in order to populate child node
properties.
>
> Here, also same case for TPS6507x MFD device
>
> TPS6507x MFD device has two childs:
> 1. regulator
> 2. touch screen.
>
> Regulator driver for TPS6507x is already in mainline and using function
> "of_find_node_by_name" to populate device tree properties for regulators.
> On similar lines I used "of_find_node_by_name" to populate device
> tree properties for touch screen.
>
> Still, I agreed that it is possible to attach OF data to child platform
device
> but it requires changes in MFD driver of TPS6507x.
>
> Please let me know your opinion about this.
Please let me know so accordingly I will make changes in code.
Regards
Manish Badarkhe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130701/03727dfa/attachment.html>
More information about the devicetree-discuss
mailing list