[PATCH v2 0/3] arm: atmel: at91sam9n12: add i2c pinctrl and qt1070 support

[Bo Shen]

this patch is based on linux master branch, implementation as following:
  - add the i2c pinctrl which needed for using at91sam9n12 TWI
  - enable qt1070
  - trival fix for the gpio-key pin number

Changes in v2:
  - remove comments as use micro
  - using micro for interrupt trigger mode

Bo Shen (3):
  arm: atmel: at91sam9n12: add pinctrl of TWI
  arm: atmel: at91sam9n12: add qt1070 support
  arm: atmel: at91sam9n12: correct pin number of gpio-key

 arch/arm/boot/dts/at91sam9n12.dtsi  |   20 ++++++++++++++++++++
 arch/arm/boot/dts/at91sam9n12ek.dts |   18 +++++++++++++++++-
 2 files changed, 37 insertions(+), 1 deletion(-)

-- 
1.7.9.5