[PATCH V3 2/3] phy: Add driver for Exynos DP PHY

[Sylwester Nawrocki]

On 07/01/2013 07:24 AM, Jingoo Han wrote:
> Add a PHY provider driver for the Samsung Exynos SoC DP PHY.
>
> Signed-off-by: Jingoo Han<jg1.han at samsung.com>
> Cc: Sylwester Nawrocki<s.nawrocki at samsung.com>
> Acked-by: Felipe Balbi<balbi at ti.com>
> ---
>   .../devicetree/bindings/phy/samsung-phy.txt        |    8 ++
>   drivers/phy/Kconfig                                |    5 +
>   drivers/phy/Makefile                               |    1 +
>   drivers/phy/phy-exynos-dp-video.c                  |  118 ++++++++++++++++++++
>   4 files changed, 132 insertions(+)
>   create mode 100644 drivers/phy/phy-exynos-dp-video.c
>
> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> index 5ff208c..3fb656a 100644
> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> @@ -12,3 +12,11 @@ the PHY specifier identifies the PHY and its meaning is as follows:
>     1 - MIPI DSIM 0,
>     2 - MIPI CSIS 1,
>     3 - MIPI DSIM 1.
> +
> +Samsung EXYNOS SoC series DP PHY

I would make it "Samsung EXYNOS SoC series Display Port PHY"

> +-------------------------------------------------
> +
> +Required properties:
> +- compatible : should be "samsung,exynos5250-dp-video-phy";
> +- reg : offset and length of the DP PHY register set;
> +- #phy-cells : from the generic phy bindings, must be 0;

s/phy/PHY ?

> \ No newline at end of file

Missing new line character.

> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 6f446d0..760f55a 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -19,4 +19,9 @@ config PHY_EXYNOS_MIPI_VIDEO
>   	help
>   	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung
>   	  S5P and EXYNOS SoCs.
> +
> +config PHY_EXYNOS_DP_VIDEO
> +	tristate "EXYNOS SoC series DP PHY driver"

"EXYNOS SoC series Display Port PHY driver" ?

> +	help
> +	  Support for DP PHY found on Samsung EXYNOS SoCs.

s/DP/Display Port ?

>   endif
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 71d8841..0fd1340 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -4,3 +4,4 @@
>
>   obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
>   obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
> +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
> new file mode 100644
> index 0000000..75e1d11
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-dp-video.c
> @@ -0,0 +1,118 @@
> +/*
> + * Samsung EXYNOS SoC series DP PHY driver

s/DP/Display Port ?

> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Jingoo Han<jg1.han at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include<linux/io.h>
> +#include<linux/kernel.h>
> +#include<linux/module.h>
> +#include<linux/of.h>
> +#include<linux/of_address.h>
> +#include<linux/phy/phy.h>
> +#include<linux/platform_device.h>
> +
> +/* DPTX_PHY_CONTROL register */
> +#define EXYNOS_DPTX_PHY_ENABLE		(1<<  0)
> +
> +struct exynos_dp_video_phy {
> +	void __iomem *regs;
> +};
> +
> +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
> +{
> +	void __iomem *addr;

How about just dropping this local variable ?

> +	u32 reg;
> +
> +	addr = state->regs;
> +
> +	reg = readl(addr);
> +	if (on)
> +		reg |= EXYNOS_DPTX_PHY_ENABLE;
> +	else
> +		reg&= ~EXYNOS_DPTX_PHY_ENABLE;
> +	writel(reg, addr);
> +
> +	return 0;
> +}
> +
> +static int exynos_dp_video_phy_power_on(struct phy *phy)
> +{
> +	struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
> +
> +	return __set_phy_state(state, 1);
> +}
> +
> +static int exynos_dp_video_phy_power_off(struct phy *phy)
> +{
> +	struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
> +
> +	return __set_phy_state(state, 0);
> +}
> +
> +static struct phy_ops exynos_dp_video_phy_ops = {
> +	.power_on	= exynos_dp_video_phy_power_on,
> +	.power_off	= exynos_dp_video_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int exynos_dp_video_phy_probe(struct platform_device *pdev)
> +{
> +	struct exynos_dp_video_phy *state;
> +	struct device *dev =&pdev->dev;
> +	struct resource *res;
> +	struct phy_provider *phy_provider;
> +	struct phy *phy;
> +
> +	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
> +	if (!state)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> +	state->regs = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(state->regs))
> +		return PTR_ERR(state->regs);
> +
> +	dev_set_drvdata(dev, state);

I can't see any corresponding dev_get_drvdata(), it should be safe
to remove this assignment.

> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	if (IS_ERR(phy_provider))
> +		return PTR_ERR(phy_provider);
> +
> +	phy = devm_phy_create(dev, 0,&exynos_dp_video_phy_ops, "dp");

The label could be NULL, since there is no need to support non-dt config.

> +	if (IS_ERR(phy)) {
> +		dev_err(dev, "failed to create DP PHY\n");
> +		return PTR_ERR(phy);
> +	}
> +	phy_set_drvdata(phy, state);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF

You don't use of_match_ptr() macro to assign of_match_table to the driver
structure below. This means build with CONFIG_OF disabled is broken now.
I would just remove that #ifdef and would make the driver depends on
CONFIG_OF.

> +static const struct of_device_id exynos_dp_video_phy_of_match[] = {
> +	{ .compatible = "samsung,exynos5250-dp-video-phy" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
> +#endif
> +
> +static struct platform_driver exynos_dp_video_phy_driver = {
> +	.probe	= exynos_dp_video_phy_probe,
> +	.driver = {
> +		.name	= "exynos-dp-video-phy",
> +		.owner	= THIS_MODULE,
> +		.of_match_table	= exynos_dp_video_phy_of_match,
> +	}
> +};
> +module_platform_driver(exynos_dp_video_phy_driver);
> +
> +MODULE_AUTHOR("Jingoo Han<jg1.han at samsung.com>");
> +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver");
> +MODULE_LICENSE("GPL v2");

Thanks,
Sylwester