July 2021 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Jul 1 08:11:31 AEST 2021
Ending: Sat Jul 31 08:48:07 AEST 2021
Messages: 262

• [x86-power-control]: press the power button for a long time that can't force turn off system power   Chris Chen (TPI)
• 回覆: [x86-power-control]: press the power button for a long time that can't force turn off system power   Chris Chen (TPI)
• Serial over LAN by phosphor-net-ipmid issue   George Hung (洪忠敬)
• [PATCH 10/14] peci: Add peci-cpu driver   David Müller (ELSOFT AG)
• Requesting feedback on in-progress GUI designs (Key clear/Clear sensitive data)   Parishrut Bhatia
• Requesting feedback on in-progress GUI designs (Server overview and header content)   Parishrut Bhatia
• [x86-power-control]: press the power button for a long time that can't force turn off system power   Bills, Jason M
• Re: 回覆: [x86-power-control]: press the power button for a long time that can't force turn off system power   Bills, Jason M
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   Mark Brown
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   Mark Brown
• [PATCH 2/2] dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible   Mark Brown
• [PATCH 0/2] spi: fsi: Reduce max transfer size to 8 bytes   Mark Brown
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   Mark Brown
• OPENBMC ASRock Rack   Jeff9 Chan(陳松儉_ASRockRack)
• Signed CLA from ASPEED   Luke Chen
• Signed CLA from ASPEED   Luke Chen
• Signed CLA from ASPEED   Luke Chen
• Signed CLA from ASPEED   Luke Chen
• How about the performance of 2D enging in AST2400   Luke Chen
• OpenBMC Uboot: Missing Driver for Ethernet Switch KSZ9893R   Sushil Dubey
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Randy Dunlap
• [PATCH] pinctrl: aspeed: placate kernel-doc warnings   Randy Dunlap
• xyz.openbmc_project.BeepCode and PSUSensors   Paul Fertser
• [PATCH v2 3/3] net/ncsi: add dummy response handler for Intel boards   Paul Fertser
• [PATCH v2 0/3] net/ncsi: Add NCSI Intel OEM command to keep PHY link up   Paul Fertser
• [PATCH v2 3/3] net/ncsi: add dummy response handler for Intel boards   Paul Fertser
• [PATCH v2 0/3] net/ncsi: Add NCSI Intel OEM command to keep PHY link up   Paul Fertser
• Serial Over Lan (SOL) no login prompt on Linux IRQ mode   Paul Fertser
• Serial Over Lan (SOL) no login prompt on Linux IRQ mode   Paul Fertser
• Serial Over Lan (SOL) no login prompt on Linux IRQ mode   Paul Fertser
• Redfish requests for dbus-sensors data are needlessly slow - analysis   Paul Fertser
• Redfish requests for dbus-sensors data are needlessly slow - analysis   Paul Fertser
• Using smbios-mdr: expected file format   Garrett, Mike (HPE Server Firmware)
• RDE Enablement   Garrett, Mike (HPE Server Firmware)
• Leveraging and extending smbios-mdr   Garrett, Mike (HPE Server Firmware)
• [PATCH u-boot v2019.04-aspeed-openbmc v2 0/2] Store default u-boot env in   Graeme Gregory
• [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine   Ping Guo
• apparmor support   Ratan Gupta
• apparmor support   Ratan Gupta
• apparmor support   Ratan Gupta
• [PATCH 04/14] dt-bindings: Add bindings for peci-aspeed   Rob Herring
• [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver   Rob Herring
• [OpenBMC]Create new user with Redfish group roles   Hieu Huynh
• [PATCH docs:designs:device-tree-gpio-naming] Add vrm-fault-standby pin name   Milton Miller II
• AST2600: Linux driver support for SPI controller   Milton Miller II
• [PATCH v2 2/3] net/ncsi: add NCSI Intel OEM command to keep PHY up   Eddie James
• [PATCH 0/2] spi: fsi: Reduce max transfer size to 8 bytes   Eddie James
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   Eddie James
• [PATCH 2/2] dt-bindings: fsi: Remove ibm, fsi2spi-restricted compatible   Eddie James
• [PATCH 0/3] OCC: fsi and hwmon: Set sequence number in submit interface   Eddie James
• [PATCH 1/3] fsi: occ: Force sequence numbering per OCC   Eddie James
• [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation   Eddie James
• [PATCH 3/3] fsi: occ: Add dynamic debug to dump command and response   Eddie James
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   Eddie James
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   Eddie James
• [PATCH 0/2] spi: fsi: Reduce max transfer size to 8 bytes   Eddie James
• [PATCH 1/3] fsi: occ: Force sequence numbering per OCC   Eddie James
• [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation   Eddie James
• [PATCH v2 0/3] OCC: fsi and hwmon: Set sequence number in submit interface   Eddie James
• [PATCH v2 1/3] fsi: occ: Force sequence numbering per OCC   Eddie James
• [PATCH v2 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation   Eddie James
• [PATCH v2 3/3] fsi: occ: Add dynamic debug to dump command and response   Eddie James
• [PATCH v1] ARM: dts: fp5280g2: Add KCS node for LPC MCTP   Andrew Jeffery
• [PATCH] ARM: dts: tacoma: Add phase corrections for eMMC   Andrew Jeffery
• [PATCH linux dev-5.10] ARM: dts: tacoma: Clean up KCS nodes   Andrew Jeffery
• [RFC PATCH linux dev-5.10] ARM: dts: rainier: Add bmc-boot-indicator GPIO name   Andrew Jeffery
• [PATCH v2] ARM: dts: everest: Add phase corrections for eMMC   Andrew Jeffery
• Re: [PATCH linux dev-5.10 2/3] ARM: dts: everest: Define name for gpio line Q2   Andrew Jeffery
• [PATCH] pinctrl: aspeed: placate kernel-doc warnings   Andrew Jeffery
• [PATCH 1/2] ARM: dts: rainier, everest: Add TPM reset GPIO   Andrew Jeffery
• [PATCH 2/2] ARM: dts: aspeed: tacoma: Add TPM reset GPIO   Andrew Jeffery
• `phosphor-logging` APIs (RFC)   Andrew Jeffery
• `phosphor-logging` APIs (RFC)   Andrew Jeffery
• power supply monitor   JillGuo
• OriginOfCondition in Redfish Log Entry   Rahul Kapoor
• Update to Code Construct's CCLA Schedule A   Jeremy Kerr
• [PATCH 3/3] fsi: occ: Add dynamic debug to dump command and response   Jeremy Kerr
• Serial over LAN by phosphor-net-ipmid issue   Konstantin Klubnichkin
• Serial Over Lan (SOL) no login prompt on Linux IRQ mode   Konstantin Klubnichkin
• Serial Over Lan (SOL) no login prompt on Linux IRQ mode   Konstantin Klubnichkin
• Serial Over Lan (SOL) no login prompt on Linux IRQ mode   Konstantin Klubnichkin
• [PATCH u-boot v2019.04-aspeed-openbmc] aspeed/hace: Reset when error occurs   Adriana Kobylak
• [PATCH linux dev-5.10] ARM: dts: rainier: Add 'factory-reset-toggle' as GPIOF6   Adriana Kobylak
• Standard FW update package structure - use PLDM?   Deepak Kodihalli
• RDE Enablement   Deepak Kodihalli
• [PATCH u-boot v2019.04-aspeed-openbmc v1 1/2] ast2600: spl: Fixes boot from RAM device   Sandhya Koteshwara
• [PATCH u-boot v2019.04-aspeed-openbmc v1 1/2] ast2600: spl: Fixes boot from RAM device   Sandhya Koteshwara
• [PATCH linux dev-5.10] ARM: dts: rainier: Add 'factory-reset-toggle' as GPIOF6   Isaac Kurth
• [PATCH 0/2] spi: fsi: Reduce max transfer size to 8 bytes   David Laight
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   David Laight
• [PATCH 1/2] spi: fsi: Reduce max transfer size to 8 bytes   David Laight
• [PATCH u-boot v2019.04-aspeed-openbmc v1 1/2] ast2600: spl: Fixes boot from RAM device   Troy Lee
• [PATCH AUTOSEL 5.13 54/85] mmc: sdhci-of-aspeed: Turn down a phase correction warning   Sasha Levin
• [PATCH AUTOSEL 5.12 51/80] mmc: sdhci-of-aspeed: Turn down a phase correction warning   Sasha Levin
• Serial over LAN by phosphor-net-ipmid issue   George Liu
• [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers   Luck, Tony
• [PATCH 0/2] Add NCSI Intel OEM command to keep PHY link up on   Ivan Mikhaylov
• [PATCH 1/2] net/ncsi: add NCSI Intel OEM command to keep PHY up   Ivan Mikhaylov
• [PATCH 2/2] net/ncsi: add dummy response handler for Intel boards   Ivan Mikhaylov
• [PATCH v2 0/3] net/ncsi: Add NCSI Intel OEM command to keep PHY link up   Ivan Mikhaylov
• [PATCH v2 1/3] net/ncsi: fix restricted cast warning of sparse   Ivan Mikhaylov
• [PATCH v2 2/3] net/ncsi: add NCSI Intel OEM command to keep PHY up   Ivan Mikhaylov
• [PATCH v2 3/3] net/ncsi: add dummy response handler for Intel boards   Ivan Mikhaylov
• [PATCH v2 1/3] net/ncsi: fix restricted cast warning of sparse   Ivan Mikhaylov
• [PATCH v2 3/3] net/ncsi: add dummy response handler for Intel boards   Ivan Mikhaylov
• [PATCH v2 2/3] net/ncsi: add NCSI Intel OEM command to keep PHY up   Ivan Mikhaylov
• [PATCH v2 3/3] net/ncsi: add dummy response handler for Intel boards   Ivan Mikhaylov
• [PATCH v2 0/3] net/ncsi: Add NCSI Intel OEM command to keep PHY link up   Ivan Mikhaylov
• [PATCH 0/2] Add NCSI Intel OEM command to keep PHY link up on   David Miller
• Cancelled: GUI Design Work Group - Wednesday, 7/7/21 at 10:00 AM Central   Derick Montague
• [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver   Quan Nguyen
• [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver   Quan Nguyen
• [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver   Quan Nguyen
• [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver   Quan Nguyen
• [PATCH v5 4/4] docs: hwmon: (smpro-hwmon) Add documentation   Quan Nguyen
• [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver   Quan Nguyen
• [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver   Quan Nguyen
• [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver   Quan Nguyen
• Add socsesor daemon to handle Ampere SoC sensors in dbus-sensors.   Thu Nguyen
• AST2600: Linux driver support for SPI controller   VINOTHKUMAR RK
• [PATCH 0/4] ARM: dts: aspeed: Enable ADC for wedge100 BMC   Tao Ren
• Update phosphor-defaults with stronger root password hash algorithm   Joseph Reynolds
• Security Working Group meeting - Wednesday July 21   Joseph Reynolds
• Security Working Group meeting - Wednesday July 21 - results   Joseph Reynolds
• do you have expertise on Universal Power Supplies standards ?   Michael Richardson
• [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver   Guenter Roeck
• [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver   Guenter Roeck
• [PATCH 11/14] hwmon: peci: Add cputemp driver   Guenter Roeck
• [PATCH 12/14] hwmon: peci: Add dimmtemp driver   Guenter Roeck
• [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation   Guenter Roeck
• [PATCH 11/14] hwmon: peci: Add cputemp driver   Guenter Roeck
• [PATCH 12/14] hwmon: peci: Add dimmtemp driver   Guenter Roeck
• [PATCH 09/14] peci: Add support for PECI device drivers   Guenter Roeck
• [PATCH 13/14] docs: hwmon: Document PECI drivers   Guenter Roeck
• [PATCH] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control   Guenter Roeck
• [PATCH 11/14] hwmon: peci: Add cputemp driver   Guenter Roeck
• Bmcweb redfish multiple host support   Naveen Moses S
• Bmcweb redfish multiple host support   Naveen Moses S
• Using smbios-mdr: expected file format   Artem Senichev
• Leveraging and extending smbios-mdr   Artem Senichev
• [PATCH] ARM: dts: aspeed: update e3c246d4i vuart properties   Joel Stanley
• [PATCH] ARM: dts: tacoma: Add phase corrections for eMMC   Joel Stanley
• U-boot version selection   Joel Stanley
• [PATCH v2 1/3] net/ncsi: fix restricted cast warning of sparse   Joel Stanley
• [PATCH v2 2/3] net/ncsi: add NCSI Intel OEM command to keep PHY up   Joel Stanley
• [PATCH v2 3/3] net/ncsi: add dummy response handler for Intel boards   Joel Stanley
• U-boot version selection   Joel Stanley
• [PATCH u-boot v2019.04-aspeed-openbmc] aspeed/hace: Reset when error occurs   Joel Stanley
• [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine   Joel Stanley
• [PATCH 0/4] ARM: dts: aspeed: Enable ADC for wedge100 BMC   Joel Stanley
• [PATCH 1/3] fsi: occ: Force sequence numbering per OCC   Joel Stanley
• [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation   Joel Stanley
• OpenBMC Uboot: Missing Driver for Ethernet Switch KSZ9893R   Joel Stanley
• [PATCH 0/2] ARM: dts: aspeed: Add TPM GPIO names   Joel Stanley
• [PATCH 1/2] ARM: dts: rainier, everest: Add TPM reset GPIO   Joel Stanley
• [PATCH 2/2] ARM: dts: aspeed: tacoma: Add TPM reset GPIO   Joel Stanley
• [PATCH] ARM: dts: aspeed: rainier, everest: Add secure boot GPIO   Joel Stanley
• Signed CLA from ASPEED   Joel Stanley
• Bmcweb redfish multiple host support   Ed Tanous
• Bmcweb redfish multiple host support   Ed Tanous
• OPENBMC ASRock Rack   Ed Tanous
• RDE Enablement   Ed Tanous
• RDE Enablement   Ed Tanous
• Add socsesor daemon to handle Ampere SoC sensors in dbus-sensors.   Ed Tanous
• Redfish requests for dbus-sensors data are needlessly slow - analysis   Ed Tanous
• Redfish requests for dbus-sensors data are needlessly slow - analysis   Ed Tanous
• x86 power state cheak in the [phosphor-fan-presence] for sensor monitor .   Manish Thakur
• bus method call error process   Deng Tyler
• [PATCH linux dev-5.10 1/3] ARM: dts: rainier: Define name for gpio line Q2   Ben Tyner
• [PATCH linux dev-5.10 2/3] ARM: dts: everest: Define name for gpio line Q2   Ben Tyner
• [PATCH linux dev-5.10 3/3] ARM: dts: everest: Define name for gpio line B6   Ben Tyner
• [PATCH docs:designs:device-tree-gpio-naming] Add vrm-fault-standby pin name   Ben Tyner
• U-boot version selection   Zev Weiss
• U-boot version selection   Zev Weiss
• [PATCH 12/14] hwmon: peci: Add dimmtemp driver   Zev Weiss
• [PATCH 11/14] hwmon: peci: Add cputemp driver   Zev Weiss
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Zev Weiss
• [PATCH 08/14] peci: Add device detection   Zev Weiss
• [PATCH 09/14] peci: Add support for PECI device drivers   Zev Weiss
• [PATCH 10/14] peci: Add peci-cpu driver   Zev Weiss
• [PATCH 13/14] docs: hwmon: Document PECI drivers   Zev Weiss
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Zev Weiss
• [PATCH 08/14] peci: Add device detection   Zev Weiss
• [PATCH 09/14] peci: Add support for PECI device drivers   Zev Weiss
• [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers   Dan Williams
• [PATCH 00/14] Introduce PECI subsystem   Dan Williams
• [PATCH 06/14] peci: Add core infrastructure   Dan Williams
• [PATCH 06/14] peci: Add core infrastructure   Dan Williams
• [PATCH 00/14] Introduce PECI subsystem   Williams, Dan J
• [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers   Williams, Dan J
• [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent   Williams, Dan J
• [PATCH 06/14] peci: Add core infrastructure   Williams, Dan J
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Williams, Dan J
• [PATCH 08/14] peci: Add device detection   Williams, Dan J
• [SecurityworkGroup] Security response team - bug database needed   Patrick Williams
• Standard FW update package structure - use PLDM?   Patrick Williams
• AST2600: Linux driver support for SPI controller   Patrick Williams
• Security Working Group meeting - Wednesday July 21 - results   Patrick Williams
• `phosphor-logging` APIs (RFC)   Patrick Williams
• `phosphor-logging` APIs (RFC)   Patrick Williams
• `phosphor-logging` APIs (RFC)   Patrick Williams
• [PATCH 00/14] Introduce PECI subsystem   Iwona Winiarska
• [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers   Iwona Winiarska
• [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent   Iwona Winiarska
• [PATCH 03/14] dt-bindings: Add generic bindings for PECI   Iwona Winiarska
• [PATCH 04/14] dt-bindings: Add bindings for peci-aspeed   Iwona Winiarska
• [PATCH 05/14] ARM: dts: aspeed: Add PECI controller nodes   Iwona Winiarska
• [PATCH 06/14] peci: Add core infrastructure   Iwona Winiarska
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Iwona Winiarska
• [PATCH 08/14] peci: Add device detection   Iwona Winiarska
• [PATCH 09/14] peci: Add support for PECI device drivers   Iwona Winiarska
• [PATCH 10/14] peci: Add peci-cpu driver   Iwona Winiarska
• [PATCH 11/14] hwmon: peci: Add cputemp driver   Iwona Winiarska
• [PATCH 12/14] hwmon: peci: Add dimmtemp driver   Iwona Winiarska
• [PATCH 13/14] docs: hwmon: Document PECI drivers   Iwona Winiarska
• [PATCH 14/14] docs: Add PECI documentation   Iwona Winiarska
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Winiarska, Iwona
• [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers   Winiarska, Iwona
• [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent   Winiarska, Iwona
• [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent   Winiarska, Iwona
• [PATCH 00/14] Introduce PECI subsystem   Winiarska, Iwona
• [PATCH 06/14] peci: Add core infrastructure   Winiarska, Iwona
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Winiarska, Iwona
• [PATCH 08/14] peci: Add device detection   Winiarska, Iwona
• [PATCH 04/14] dt-bindings: Add bindings for peci-aspeed   Winiarska, Iwona
• [PATCH 11/14] hwmon: peci: Add cputemp driver   Winiarska, Iwona
• [PATCH 12/14] hwmon: peci: Add dimmtemp driver   Winiarska, Iwona
• [PATCH 07/14] peci: Add peci-aspeed controller driver   Winiarska, Iwona
• [PATCH 08/14] peci: Add device detection   Winiarska, Iwona
• [PATCH 09/14] peci: Add support for PECI device drivers   Winiarska, Iwona
• [PATCH 08/14] peci: Add device detection   Winiarska, Iwona
• [PATCH 09/14] peci: Add support for PECI device drivers   Winiarska, Iwona
• [PATCH 10/14] peci: Add peci-cpu driver   Winiarska, Iwona
• [PATCH 10/14] peci: Add peci-cpu driver   Winiarska, Iwona
• [PATCH 11/14] hwmon: peci: Add cputemp driver   Winiarska, Iwona
• [PATCH 12/14] hwmon: peci: Add dimmtemp driver   Winiarska, Iwona
• [PATCH] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control   Brandon Wyman
• Fwd: [External] consult OBMC SEL log solution   Lei Yu
• dbus-top Design Proposal   adedeji adebisi
• [PATCH 0/4] ARM: dts: aspeed: Enable ADC for wedge100 BMC   rentao.bupt at gmail.com
• [PATCH 1/4] ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi   rentao.bupt at gmail.com
• [PATCH 2/4] ARM: dts: aspeed: wedge40: Remove redundant ADC device   rentao.bupt at gmail.com
• [PATCH 3/4] ARM: dts: aspeed: galaxy100: Remove redundant ADC device   rentao.bupt at gmail.com
• [PATCH 4/4] ARM: dts: aspeed: wedge100: Enable ADC channels   rentao.bupt at gmail.com
• [PATCH] ARM: dts: aspeed: minipack: Update flash partition table   rentao.bupt at gmail.com
• [PATCH 0/6] ARM: dts: Add Facebook AST2600 BMCs   rentao.bupt at gmail.com
• [PATCH 1/6] ARM: dts: Add Facebook BMC 128MB flash layout   rentao.bupt at gmail.com
• [PATCH 2/6] ARM: dts: aspeed: wedge400: Use common flash layout   rentao.bupt at gmail.com
• [PATCH 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs   rentao.bupt at gmail.com
• [PATCH 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC   rentao.bupt at gmail.com
• [PATCH 5/6] ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC   rentao.bupt at gmail.com
• [PATCH 6/6] ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC   rentao.bupt at gmail.com
• [PATCH v2 0/3] net/ncsi: Add NCSI Intel OEM command to keep PHY link up   patchwork-bot+netdevbpf at kernel.org
• Update to Code Construct's CCLA Schedule A   krtaylor
• My role as Community Manager   krtaylor
• Signed CLA from ASPEED   krtaylor
• [PATCH 06/14] peci: Add core infrastructure   gregkh at linuxfoundation.org
• [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation   kernel test robot
• [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation   kernel test robot
• [PATCH 3/3] fsi: occ: Add dynamic debug to dump command and response   kernel test robot
• How about the performance of 2D enging in AST2400   南野ムルシエラゴ
• Module develop issue   吳秉昌

Last message date: Sat Jul 31 08:48:07 AEST 2021
Archived on: Sat Jul 31 08:49:28 AEST 2021

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...