[PATCH 10/14] peci: Add peci-cpu driver

Winiarska, Iwona iwona.winiarska at intel.com
Sat Jul 31 07:21:48 AEST 2021


On Tue, 2021-07-27 at 21:33 +0000, Zev Weiss wrote:
> On Mon, Jul 12, 2021 at 05:04:43PM CDT, Iwona Winiarska wrote:
> > PECI is an interface that may be used by different types of devices.
> > Here we're adding a peci-cpu driver compatible with Intel processors.
> > The driver is responsible for handling auxiliary devices that can
> > subsequently be used by other drivers (e.g. hwmons).
> > 
> > Signed-off-by: Iwona Winiarska <iwona.winiarska at intel.com>
> > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> > ---
> > MAINTAINERS              |   1 +
> > drivers/peci/Kconfig     |  15 ++
> > drivers/peci/Makefile    |   2 +
> > drivers/peci/cpu.c       | 347 +++++++++++++++++++++++++++++++++++++++
> > drivers/peci/device.c    |   1 +
> > drivers/peci/internal.h  |  27 +++
> > drivers/peci/request.c   | 211 ++++++++++++++++++++++++
> > include/linux/peci-cpu.h |  38 +++++
> > include/linux/peci.h     |   8 -
> > 9 files changed, 642 insertions(+), 8 deletions(-)
> > create mode 100644 drivers/peci/cpu.c
> > create mode 100644 include/linux/peci-cpu.h
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 4ba874afa2fa..f47b5f634293 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -14511,6 +14511,7 @@ L:      openbmc at lists.ozlabs.org (moderated for non-
> > subscribers)
> > S:      Supported
> > F:      Documentation/devicetree/bindings/peci/
> > F:      drivers/peci/
> > +F:     include/linux/peci-cpu.h
> > F:      include/linux/peci.h
> > 
> > PENSANDO ETHERNET DRIVERS
> > diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
> > index 27c31535843c..9e17e06fda90 100644
> > --- a/drivers/peci/Kconfig
> > +++ b/drivers/peci/Kconfig
> > @@ -16,6 +16,21 @@ menuconfig PECI
> > 
> > if PECI
> > 
> > +config PECI_CPU
> > +       tristate "PECI CPU"
> > +       select AUXILIARY_BUS
> > +       help
> > +         This option enables peci-cpu driver for Intel processors. It is
> > +         responsible for creating auxiliary devices that can subsequently
> > +         be used by other drivers in order to perform various
> > +         functionalities such as e.g. temperature monitoring.
> > +
> > +         Additional drivers must be enabled in order to use the
> > functionality
> > +         of the device.
> > +
> > +         This driver can also be built as a module. If so, the module
> > +         will be called peci-cpu.
> > +
> > source "drivers/peci/controller/Kconfig"
> > 
> > endif # PECI
> > diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
> > index 917f689e147a..7de18137e738 100644
> > --- a/drivers/peci/Makefile
> > +++ b/drivers/peci/Makefile
> > @@ -3,6 +3,8 @@
> > # Core functionality
> > peci-y := core.o request.o device.o sysfs.o
> > obj-$(CONFIG_PECI) += peci.o
> > +peci-cpu-y := cpu.o
> > +obj-$(CONFIG_PECI_CPU) += peci-cpu.o
> > 
> > # Hardware specific bus drivers
> > obj-y += controller/
> > diff --git a/drivers/peci/cpu.c b/drivers/peci/cpu.c
> > new file mode 100644
> > index 000000000000..8d130a9a71ad
> > --- /dev/null
> > +++ b/drivers/peci/cpu.c
> > @@ -0,0 +1,347 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +// Copyright (c) 2021 Intel Corporation
> > +
> > +#include <linux/auxiliary_bus.h>
> > +#include <linux/module.h>
> > +#include <linux/peci.h>
> > +#include <linux/peci-cpu.h>
> > +#include <linux/slab.h>
> > +#include <linux/x86/intel-family.h>
> > +
> > +#include "internal.h"
> > +
> > +/**
> > + * peci_temp_read() - read the maximum die temperature from PECI target
> > device
> > + * @device: PECI device to which request is going to be sent
> > + * @temp_raw: where to store the read temperature
> > + *
> > + * It uses GetTemp PECI command.
> > + *
> > + * Return: 0 if succeeded, other values in case errors.
> > + */
> > +int peci_temp_read(struct peci_device *device, s16 *temp_raw)
> > +{
> > +       struct peci_request *req;
> > +
> > +       req = peci_get_temp(device);
> > +       if (IS_ERR(req))
> > +               return PTR_ERR(req);
> > +
> > +       *temp_raw = peci_request_data_temp(req);
> > +
> > +       peci_request_free(req);
> > +
> > +       return 0;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_temp_read, PECI_CPU);
> > +
> > +/**
> > + * peci_pcs_read() - read PCS register
> > + * @device: PECI device to which request is going to be sent
> > + * @index: PCS index
> > + * @param: PCS parameter
> > + * @data: where to store the read data
> > + *
> > + * It uses RdPkgConfig PECI command.
> > + *
> > + * Return: 0 if succeeded, other values in case errors.
> > + */
> > +int peci_pcs_read(struct peci_device *device, u8 index, u16 param, u32
> > *data)
> > +{
> > +       struct peci_request *req;
> > +       int ret;
> > +
> > +       req = peci_pkg_cfg_readl(device, index, param);
> > +       if (IS_ERR(req))
> > +               return PTR_ERR(req);
> > +
> > +       ret = peci_request_status(req);
> > +       if (ret)
> > +               goto out_req_free;
> > +
> > +       *data = peci_request_data_readl(req);
> > +out_req_free:
> 
> As in patch 9, this control flow could be rewritten as just
> 
>         if (!ret)
>                 *data = peci_request_data_readl(req);
> 
> and avoid the goto.

I think explicit error handling just reads better (and is a more common pattern
in kernel code).

In order to save a single line of code, doing:
if (non-error)
   do-the-regular-flow

where readers are used to the inverse:
if (error)
   handle-error

do-the-regular-flow

may make the reader confused (it's easy to mix up error handling with regular
flow).

> 
> > +       peci_request_free(req);
> > +
> > +       return ret;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_pcs_read, PECI_CPU);
> > +
> > +/**
> > + * peci_pci_local_read() - read 32-bit memory location using raw address
> > + * @device: PECI device to which request is going to be sent
> > + * @bus: bus
> > + * @dev: device
> > + * @func: function
> > + * @reg: register
> > + * @data: where to store the read data
> > + *
> > + * It uses RdPCIConfigLocal PECI command.
> > + *
> > + * Return: 0 if succeeded, other values in case errors.
> > + */
> > +int peci_pci_local_read(struct peci_device *device, u8 bus, u8 dev, u8
> > func,
> > +                       u16 reg, u32 *data)
> > +{
> > +       struct peci_request *req;
> > +       int ret;
> > +
> > +       req = peci_pci_cfg_local_readl(device, bus, dev, func, reg);
> > +       if (IS_ERR(req))
> > +               return PTR_ERR(req);
> > +
> > +       ret = peci_request_status(req);
> > +       if (ret)
> > +               goto out_req_free;
> > +
> > +       *data = peci_request_data_readl(req);
> > +out_req_free:
> > +       peci_request_free(req);
> > +
> > +       return ret;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_pci_local_read, PECI_CPU);
> > +
> > +/**
> > + * peci_ep_pci_local_read() - read 32-bit memory location using raw address
> > + * @device: PECI device to which request is going to be sent
> > + * @seg: PCI segment
> > + * @bus: bus
> > + * @dev: device
> > + * @func: function
> > + * @reg: register
> > + * @data: where to store the read data
> > + *
> > + * Like &peci_pci_local_read, but it uses RdEndpointConfig PECI command.
> > + *
> > + * Return: 0 if succeeded, other values in case errors.
> > + */
> > +int peci_ep_pci_local_read(struct peci_device *device, u8 seg,
> > +                          u8 bus, u8 dev, u8 func, u16 reg, u32 *data)
> > +{
> > +       struct peci_request *req;
> > +       int ret;
> > +
> > +       req = peci_ep_pci_cfg_local_readl(device, seg, bus, dev, func, reg);
> > +       if (IS_ERR(req))
> > +               return PTR_ERR(req);
> > +
> > +       ret = peci_request_status(req);
> > +       if (ret)
> > +               goto out_req_free;
> > +
> > +       *data = peci_request_data_readl(req);
> > +out_req_free:
> > +       peci_request_free(req);
> > +
> > +       return ret;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_ep_pci_local_read, PECI_CPU);
> > +
> > +/**
> > + * peci_mmio_read() - read 32-bit memory location using 64-bit bar offset
> > address
> > + * @device: PECI device to which request is going to be sent
> > + * @bar: PCI bar
> > + * @seg: PCI segment
> > + * @bus: bus
> > + * @dev: device
> > + * @func: function
> > + * @address: 64-bit MMIO address
> > + * @data: where to store the read data
> > + *
> > + * It uses RdEndpointConfig PECI command.
> > + *
> > + * Return: 0 if succeeded, other values in case errors.
> > + */
> > +int peci_mmio_read(struct peci_device *device, u8 bar, u8 seg,
> > +                  u8 bus, u8 dev, u8 func, u64 address, u32 *data)
> > +{
> > +       struct peci_request *req;
> > +       int ret;
> > +
> > +       req = peci_ep_mmio64_readl(device, bar, seg, bus, dev, func,
> > address);
> > +       if (IS_ERR(req))
> > +               return PTR_ERR(req);
> > +
> > +       ret = peci_request_status(req);
> > +       if (ret)
> > +               goto out_req_free;
> > +
> > +       *data = peci_request_data_readl(req);
> > +out_req_free:
> > +       peci_request_free(req);
> > +
> > +       return ret;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_mmio_read, PECI_CPU);
> > +
> > +struct peci_cpu {
> > +       struct peci_device *device;
> > +       const struct peci_device_id *id;
> > +       struct auxiliary_device **aux_devices;
> 
> Given that the size for this allocation is a compile-time constant,
> should we just inline this as 'struct auxiliary_device
> *aux_devices[ARRAY_SIZE(type)]' and avoid some kmalloc work in
> peci_cpu_add_adevices()?

Ack.

> 
> > +};
> > +
> > +static const char * const type[] = {
> 
> A slightly more descriptive name might be good -- maybe something like
> 'peci_adevice_types'?

I'll rename it to something more descriptive.

> 
> > +       "cputemp",
> > +       "dimmtemp",
> > +};
> > +
> > +static void adev_release(struct device *dev)
> > +{
> > +       struct auxiliary_device *adev = to_auxiliary_dev(dev);
> > +
> > +       kfree(adev->name);
> > +       kfree(adev);
> > +}
> > +
> > +static struct auxiliary_device *add_adev(struct peci_cpu *priv, int idx)
> > +{
> > +       struct peci_controller *controller = priv->device->controller;
> > +       struct auxiliary_device *adev;
> > +       const char *name;
> > +       int ret;
> > +
> > +       adev = kzalloc(sizeof(*adev), GFP_KERNEL);
> > +       if (!adev)
> > +               return ERR_PTR(-ENOMEM);
> > +
> > +       name = kasprintf(GFP_KERNEL, "%s.%s", type[idx], (const char *)priv-
> > >id->data);
> > +       if (!name) {
> > +               ret = -ENOMEM;
> > +               goto free_adev;
> > +       }
> > +
> > +       adev->name = name;
> > +       adev->dev.parent = &priv->device->dev;
> > +       adev->dev.release = adev_release;
> > +       adev->id = (controller->id << 16) | (priv->device->addr);
> > +
> > +       ret = auxiliary_device_init(adev);
> > +       if (ret)
> > +               goto free_name;
> > +
> > +       ret = auxiliary_device_add(adev);
> > +       if (ret) {
> > +               auxiliary_device_uninit(adev);
> > +               return ERR_PTR(ret);
> > +       }
> > +
> > +       return adev;
> > +
> > +free_name:
> > +       kfree(name);
> > +free_adev:
> > +       kfree(adev);
> > +       return ERR_PTR(ret);
> > +}
> > +
> > +static void del_adev(struct auxiliary_device *adev)
> > +{
> > +       auxiliary_device_delete(adev);
> > +       auxiliary_device_uninit(adev);
> > +}
> > +
> > +static int peci_cpu_add_adevices(struct peci_cpu *priv)
> > +{
> > +       struct device *dev = &priv->device->dev;
> > +       struct auxiliary_device *adev;
> > +       int i;
> > +
> > +       priv->aux_devices = devm_kcalloc(dev, ARRAY_SIZE(type),
> > +                                        sizeof(*priv->aux_devices),
> > +                                        GFP_KERNEL);
> > +       if (!priv->aux_devices)
> > +               return -ENOMEM;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(type); i++) {
> > +               adev = add_adev(priv, i);
> > +               if (IS_ERR(adev)) {
> > +                       dev_warn(dev, "Failed to add PECI auxiliary: %s, ret
> > = %ld\n",
> > +                                type[i], PTR_ERR(adev));
> > +                       continue;
> > +               }
> > +
> > +               priv->aux_devices[i] = adev;
> > +       }
> > +       return 0;
> > +}
> > +
> > +static int
> > +peci_cpu_probe(struct peci_device *device, const struct peci_device_id *id)
> > +{
> > +       struct device *dev = &device->dev;
> > +       struct peci_cpu *priv;
> > +
> > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > +       if (!priv)
> > +               return -ENOMEM;
> > +
> > +       dev_set_drvdata(dev, priv);
> > +       priv->device = device;
> > +       priv->id = id;
> > +
> > +       return peci_cpu_add_adevices(priv);
> > +}
> > +
> > +static void peci_cpu_remove(struct peci_device *device)
> > +{
> > +       struct peci_cpu *priv = dev_get_drvdata(&device->dev);
> > +       int i;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(type); i++) {
> > +               struct auxiliary_device *adev = priv->aux_devices[i];
> > +
> > +               if (adev)
> > +                       del_adev(adev);
> > +       }
> > +}
> > +
> > +static const struct peci_device_id peci_cpu_device_ids[] = {
> > +       { /* Haswell Xeon */
> > +               .family = 6,
> > +               .model  = INTEL_FAM6_HASWELL_X,
> > +               .data   = "hsx",
> > +       },
> > +       { /* Broadwell Xeon */
> > +               .family = 6,
> > +               .model  = INTEL_FAM6_BROADWELL_X,
> > +               .data   = "bdx",
> > +       },
> > +       { /* Broadwell Xeon D */
> > +               .family = 6,
> > +               .model  = INTEL_FAM6_BROADWELL_D,
> > +               .data   = "skxd",
> > +       },
> > +       { /* Skylake Xeon */
> > +               .family = 6,
> > +               .model  = INTEL_FAM6_SKYLAKE_X,
> > +               .data   = "skx",
> > +       },
> > +       { /* Icelake Xeon */
> > +               .family = 6,
> > +               .model  = INTEL_FAM6_ICELAKE_X,
> > +               .data   = "icx",
> > +       },
> > +       { /* Icelake Xeon D */
> > +               .family = 6,
> > +               .model  = INTEL_FAM6_ICELAKE_D,
> > +               .data   = "icxd",
> > +       },
> > +       { }
> > +};
> > +MODULE_DEVICE_TABLE(peci, peci_cpu_device_ids);
> > +
> > +static struct peci_driver peci_cpu_driver = {
> > +       .probe          = peci_cpu_probe,
> > +       .remove         = peci_cpu_remove,
> > +       .id_table       = peci_cpu_device_ids,
> > +       .driver         = {
> > +               .name           = "peci-cpu",
> > +       },
> > +};
> > +module_peci_driver(peci_cpu_driver);
> > +
> > +MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska at intel.com>");
> > +MODULE_DESCRIPTION("PECI CPU driver");
> > +MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(PECI);
> > diff --git a/drivers/peci/device.c b/drivers/peci/device.c
> > index 8c4bd1ebbc29..c278c9ea166c 100644
> > --- a/drivers/peci/device.c
> > +++ b/drivers/peci/device.c
> > @@ -3,6 +3,7 @@
> > 
> > #include <linux/bitfield.h>
> > #include <linux/peci.h>
> > +#include <linux/peci-cpu.h>
> > #include <linux/slab.h>
> > #include <linux/x86/cpu.h>
> > 
> > diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h
> > index c891c93e077a..1d39483a8acf 100644
> > --- a/drivers/peci/internal.h
> > +++ b/drivers/peci/internal.h
> > @@ -21,6 +21,7 @@ void peci_request_free(struct peci_request *req);
> > 
> > int peci_request_status(struct peci_request *req);
> > u64 peci_request_data_dib(struct peci_request *req);
> > +s16 peci_request_data_temp(struct peci_request *req);
> > 
> > u8 peci_request_data_readb(struct peci_request *req);
> > u16 peci_request_data_readw(struct peci_request *req);
> > @@ -35,6 +36,32 @@ struct peci_request *peci_pkg_cfg_readw(struct
> > peci_device *device, u8 index, u1
> > struct peci_request *peci_pkg_cfg_readl(struct peci_device *device, u8
> > index, u16 param);
> > struct peci_request *peci_pkg_cfg_readq(struct peci_device *device, u8
> > index, u16 param);
> > 
> > +struct peci_request *peci_pci_cfg_local_readb(struct peci_device *device,
> > +                                             u8 bus, u8 dev, u8 func, u16
> > reg);
> > +struct peci_request *peci_pci_cfg_local_readw(struct peci_device *device,
> > +                                             u8 bus, u8 dev, u8 func, u16
> > reg);
> > +struct peci_request *peci_pci_cfg_local_readl(struct peci_device *device,
> > +                                             u8 bus, u8 dev, u8 func, u16
> > reg);
> > +
> > +struct peci_request *peci_ep_pci_cfg_local_readb(struct peci_device
> > *device, u8 seg,
> > +                                                u8 bus, u8 dev, u8 func,
> > u16 reg);
> > +struct peci_request *peci_ep_pci_cfg_local_readw(struct peci_device
> > *device, u8 seg,
> > +                                                u8 bus, u8 dev, u8 func,
> > u16 reg);
> > +struct peci_request *peci_ep_pci_cfg_local_readl(struct peci_device
> > *device, u8 seg,
> > +                                                u8 bus, u8 dev, u8 func,
> > u16 reg);
> > +
> > +struct peci_request *peci_ep_pci_cfg_readb(struct peci_device *device, u8
> > seg,
> > +                                          u8 bus, u8 dev, u8 func, u16
> > reg);
> > +struct peci_request *peci_ep_pci_cfg_readw(struct peci_device *device, u8
> > seg,
> > +                                          u8 bus, u8 dev, u8 func, u16
> > reg);
> > +struct peci_request *peci_ep_pci_cfg_readl(struct peci_device *device, u8
> > seg,
> > +                                          u8 bus, u8 dev, u8 func, u16
> > reg);
> > +
> > +struct peci_request *peci_ep_mmio32_readl(struct peci_device *device, u8
> > bar, u8 seg,
> > +                                         u8 bus, u8 dev, u8 func, u64
> > offset);
> > +
> > +struct peci_request *peci_ep_mmio64_readl(struct peci_device *device, u8
> > bar, u8 seg,
> > +                                         u8 bus, u8 dev, u8 func, u64
> > offset);
> > /**
> >  * struct peci_device_id - PECI device data to match
> >  * @data: pointer to driver private data specific to device
> > diff --git a/drivers/peci/request.c b/drivers/peci/request.c
> > index 48354455b554..c5d39f7e8142 100644
> > --- a/drivers/peci/request.c
> > +++ b/drivers/peci/request.c
> > @@ -3,6 +3,7 @@
> > 
> > #include <linux/bug.h>
> > #include <linux/export.h>
> > +#include <linux/pci.h>
> > #include <linux/peci.h>
> > #include <linux/slab.h>
> > #include <linux/types.h>
> > @@ -15,6 +16,10 @@
> > #define  PECI_GET_DIB_WR_LEN            1
> > #define  PECI_GET_DIB_RD_LEN            8
> > 
> > +#define PECI_GET_TEMP_CMD              0x01
> > +#define  PECI_GET_TEMP_WR_LEN          1
> > +#define  PECI_GET_TEMP_RD_LEN          2
> > +
> > #define PECI_RDPKGCFG_CMD               0xa1
> > #define  PECI_RDPKGCFG_WRITE_LEN        5
> > #define  PECI_RDPKGCFG_READ_LEN_BASE    1
> > @@ -22,6 +27,44 @@
> > #define  PECI_WRPKGCFG_WRITE_LEN_BASE   6
> > #define  PECI_WRPKGCFG_READ_LEN         1
> > 
> > +#define PECI_RDIAMSR_CMD               0xb1
> > +#define  PECI_RDIAMSR_WRITE_LEN                5
> > +#define  PECI_RDIAMSR_READ_LEN         9
> > +#define PECI_WRIAMSR_CMD               0xb5
> > +#define PECI_RDIAMSREX_CMD             0xd1
> > +#define  PECI_RDIAMSREX_WRITE_LEN      6
> > +#define  PECI_RDIAMSREX_READ_LEN       9
> > +
> > +#define PECI_RDPCICFG_CMD              0x61
> > +#define  PECI_RDPCICFG_WRITE_LEN       6
> > +#define  PECI_RDPCICFG_READ_LEN                5
> > +#define  PECI_RDPCICFG_READ_LEN_MAX    24
> > +#define PECI_WRPCICFG_CMD              0x65
> > +
> > +#define PECI_RDPCICFGLOCAL_CMD                 0xe1
> > +#define  PECI_RDPCICFGLOCAL_WRITE_LEN          5
> > +#define  PECI_RDPCICFGLOCAL_READ_LEN_BASE      1
> > +#define PECI_WRPCICFGLOCAL_CMD                 0xe5
> > +#define  PECI_WRPCICFGLOCAL_WRITE_LEN_BASE     6
> > +#define  PECI_WRPCICFGLOCAL_READ_LEN           1
> > +
> > +#define PECI_ENDPTCFG_TYPE_LOCAL_PCI           0x03
> > +#define PECI_ENDPTCFG_TYPE_PCI                 0x04
> > +#define PECI_ENDPTCFG_TYPE_MMIO                        0x05
> > +#define PECI_ENDPTCFG_ADDR_TYPE_PCI            0x04
> > +#define PECI_ENDPTCFG_ADDR_TYPE_MMIO_D         0x05
> > +#define PECI_ENDPTCFG_ADDR_TYPE_MMIO_Q         0x06
> > +#define PECI_RDENDPTCFG_CMD                    0xc1
> > +#define  PECI_RDENDPTCFG_PCI_WRITE_LEN         12
> > +#define  PECI_RDENDPTCFG_MMIO_D_WRITE_LEN      14
> > +#define  PECI_RDENDPTCFG_MMIO_Q_WRITE_LEN      18
> > +#define  PECI_RDENDPTCFG_READ_LEN_BASE         1
> > +#define PECI_WRENDPTCFG_CMD                    0xc5
> > +#define  PECI_WRENDPTCFG_PCI_WRITE_LEN_BASE    13
> > +#define  PECI_WRENDPTCFG_MMIO_D_WRITE_LEN_BASE 15
> > +#define  PECI_WRENDPTCFG_MMIO_Q_WRITE_LEN_BASE 19
> > +#define  PECI_WRENDPTCFG_READ_LEN              1
> > +
> > /* Device Specific Completion Code (CC) Definition */
> > #define PECI_CC_SUCCESS                         0x40
> > #define PECI_CC_NEED_RETRY                      0x80
> > @@ -223,6 +266,27 @@ struct peci_request *peci_get_dib(struct peci_device
> > *device)
> > }
> > EXPORT_SYMBOL_NS_GPL(peci_get_dib, PECI);
> > 
> > +struct peci_request *peci_get_temp(struct peci_device *device)
> > +{
> > +       struct peci_request *req;
> > +       int ret;
> > +
> > +       req = peci_request_alloc(device, PECI_GET_TEMP_WR_LEN,
> > PECI_GET_TEMP_RD_LEN);
> > +       if (!req)
> > +               return ERR_PTR(-ENOMEM);
> > +
> > +       req->tx.buf[0] = PECI_GET_TEMP_CMD;
> > +
> > +       ret = peci_request_xfer(req);
> > +       if (ret) {
> > +               peci_request_free(req);
> > +               return ERR_PTR(ret);
> > +       }
> > +
> > +       return req;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_get_temp, PECI);
> > +
> > static struct peci_request *
> > __pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len)
> > {
> > @@ -248,6 +312,108 @@ __pkg_cfg_read(struct peci_device *device, u8 index,
> > u16 param, u8 len)
> >         return req;
> > }
> > 
> > +static u32 __get_pci_addr(u8 bus, u8 dev, u8 func, u16 reg)
> > +{
> > +       return reg | PCI_DEVID(bus, PCI_DEVFN(dev, func)) << 12;
> > +}
> > +
> > +static struct peci_request *
> > +__pci_cfg_local_read(struct peci_device *device, u8 bus, u8 dev, u8 func,
> > u16 reg, u8 len)
> > +{
> > +       struct peci_request *req;
> > +       u32 pci_addr;
> > +       int ret;
> > +
> > +       req = peci_request_alloc(device, PECI_RDPCICFGLOCAL_WRITE_LEN,
> > +                                PECI_RDPCICFGLOCAL_READ_LEN_BASE + len);
> > +       if (!req)
> > +               return ERR_PTR(-ENOMEM);
> > +
> > +       pci_addr = __get_pci_addr(bus, dev, func, reg);
> > +
> > +       req->tx.buf[0] = PECI_RDPCICFGLOCAL_CMD;
> > +       req->tx.buf[1] = 0;
> > +       put_unaligned_le24(pci_addr, &req->tx.buf[2]);
> > +
> > +       ret = peci_request_xfer_retry(req);
> > +       if (ret) {
> > +               peci_request_free(req);
> > +               return ERR_PTR(ret);
> > +       }
> > +
> > +       return req;
> > +}
> > +
> > +static struct peci_request *
> > +__ep_pci_cfg_read(struct peci_device *device, u8 msg_type, u8 seg,
> > +                 u8 bus, u8 dev, u8 func, u16 reg, u8 len)
> > +{
> > +       struct peci_request *req;
> > +       u32 pci_addr;
> > +       int ret;
> > +
> > +       req = peci_request_alloc(device, PECI_RDENDPTCFG_PCI_WRITE_LEN,
> > +                                PECI_RDENDPTCFG_READ_LEN_BASE + len);
> > +       if (!req)
> > +               return ERR_PTR(-ENOMEM);
> > +
> > +       pci_addr = __get_pci_addr(bus, dev, func, reg);
> > +
> > +       req->tx.buf[0] = PECI_RDENDPTCFG_CMD;
> > +       req->tx.buf[1] = 0;
> > +       req->tx.buf[2] = msg_type;
> > +       req->tx.buf[3] = 0;
> > +       req->tx.buf[4] = 0;
> > +       req->tx.buf[5] = 0;
> > +       req->tx.buf[6] = PECI_ENDPTCFG_ADDR_TYPE_PCI;
> > +       req->tx.buf[7] = seg; /* PCI Segment */
> > +       put_unaligned_le32(pci_addr, &req->tx.buf[8]);
> > +
> > +       ret = peci_request_xfer_retry(req);
> > +       if (ret) {
> > +               peci_request_free(req);
> > +               return ERR_PTR(ret);
> > +       }
> > +
> > +       return req;
> > +}
> > +
> > +static struct peci_request *
> > +__ep_mmio_read(struct peci_device *device, u8 bar, u8 addr_type, u8 seg,
> > +              u8 bus, u8 dev, u8 func, u64 offset, u8 tx_len, u8 len)
> > +{
> > +       struct peci_request *req;
> > +       int ret;
> > +
> > +       req = peci_request_alloc(device, tx_len,
> > PECI_RDENDPTCFG_READ_LEN_BASE + len);
> > +       if (!req)
> > +               return ERR_PTR(-ENOMEM);
> > +
> > +       req->tx.buf[0] = PECI_RDENDPTCFG_CMD;
> > +       req->tx.buf[1] = 0;
> > +       req->tx.buf[2] = PECI_ENDPTCFG_TYPE_MMIO;
> > +       req->tx.buf[3] = 0; /* Endpoint ID */
> > +       req->tx.buf[4] = 0; /* Reserved */
> > +       req->tx.buf[5] = bar;
> > +       req->tx.buf[6] = addr_type;
> > +       req->tx.buf[7] = seg; /* PCI Segment */
> > +       req->tx.buf[8] = PCI_DEVFN(dev, func);
> > +       req->tx.buf[9] = bus; /* PCI Bus */
> > +
> > +       if (addr_type == PECI_ENDPTCFG_ADDR_TYPE_MMIO_D)
> > +               put_unaligned_le32(offset, &req->tx.buf[10]);
> > +       else
> > +               put_unaligned_le64(offset, &req->tx.buf[10]);
> > +
> > +       ret = peci_request_xfer_retry(req);
> > +       if (ret) {
> > +               peci_request_free(req);
> > +               return ERR_PTR(ret);
> > +       }
> > +
> > +       return req;
> > +}
> > +
> > u8 peci_request_data_readb(struct peci_request *req)
> > {
> >         return req->rx.buf[1];
> > @@ -278,6 +444,12 @@ u64 peci_request_data_dib(struct peci_request *req)
> > }
> > EXPORT_SYMBOL_NS_GPL(peci_request_data_dib, PECI);
> > 
> > +s16 peci_request_data_temp(struct peci_request *req)
> > +{
> > +       return get_unaligned_le16(&req->rx.buf[0]);
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_temp, PECI);
> > +
> > #define __read_pkg_config(x, type) \
> > struct peci_request *peci_pkg_cfg_##x(struct peci_device *device, u8 index,
> > u16 param) \
> > { \
> > @@ -289,3 +461,42 @@ __read_pkg_config(readb, u8);
> > __read_pkg_config(readw, u16);
> > __read_pkg_config(readl, u32);
> > __read_pkg_config(readq, u64);
> > +
> > +#define __read_pci_config_local(x, type) \
> > +struct peci_request * \
> > +peci_pci_cfg_local_##x(struct peci_device *device, u8 bus, u8 dev, u8 func,
> > u16 reg) \
> > +{ \
> > +       return __pci_cfg_local_read(device, bus, dev, func, reg,
> > sizeof(type)); \
> > +} \
> 
> As with peci_pkg_cfg_*() in patch 9, it seems like this could relieve
> callers of some busy-work by returning a status int and writing the data
> to a 'type*' pointer instead of returning a struct peci_request*.

The callers that expect such behavior (getting the data directly without
bothering with requests, peci completion codes, and so on) are supposed to use
the API exposed by their "parent" driver (e.g. peci_pci_local_read).

> 
> > +EXPORT_SYMBOL_NS_GPL(peci_pci_cfg_local_##x, PECI)
> > +
> > +__read_pci_config_local(readb, u8);
> > +__read_pci_config_local(readw, u16);
> > +__read_pci_config_local(readl, u32);
> > +
> > +#define __read_ep_pci_config(x, msg_type, type) \
> > +struct peci_request * \
> > +peci_ep_pci_cfg_##x(struct peci_device *device, u8 seg, u8 bus, u8 dev, u8
> > func, u16 reg) \
> > +{ \
> > +       return __ep_pci_cfg_read(device, msg_type, seg, bus, dev, func, reg,
> > sizeof(type)); \
> > +} \
> 
> Likewise here.
> 
> > +EXPORT_SYMBOL_NS_GPL(peci_ep_pci_cfg_##x, PECI)
> > +
> > +__read_ep_pci_config(local_readb, PECI_ENDPTCFG_TYPE_LOCAL_PCI, u8);
> > +__read_ep_pci_config(local_readw, PECI_ENDPTCFG_TYPE_LOCAL_PCI, u16);
> > +__read_ep_pci_config(local_readl, PECI_ENDPTCFG_TYPE_LOCAL_PCI, u32);
> > +__read_ep_pci_config(readb, PECI_ENDPTCFG_TYPE_PCI, u8);
> > +__read_ep_pci_config(readw, PECI_ENDPTCFG_TYPE_PCI, u16);
> > +__read_ep_pci_config(readl, PECI_ENDPTCFG_TYPE_PCI, u32);
> > +
> > +#define __read_ep_mmio(x, y, addr_type, type1, type2) \
> > +struct peci_request *peci_ep_mmio##y##_##x(struct peci_device *device, u8
> > bar, u8 seg, \
> > +                                          u8 bus, u8 dev, u8 func, u64
> > offset) \
> > +{ \
> > +       return __ep_mmio_read(device, bar, addr_type, seg, bus, dev, func, \
> > +                             offset, 10 + sizeof(type1), sizeof(type2)); \
> > +} \
> 
> And here (I think).
> 
> Also, the '10 +' looks a bit magical/mysterious.  Could that be
> clarified a bit with a macro or something?

Makes sense - I'll define it.

Thank you
-Iwona

> 
> > +EXPORT_SYMBOL_NS_GPL(peci_ep_mmio##y##_##x, PECI)
> > +
> > +__read_ep_mmio(readl, 32, PECI_ENDPTCFG_ADDR_TYPE_MMIO_D, u32, u32);
> > +__read_ep_mmio(readl, 64, PECI_ENDPTCFG_ADDR_TYPE_MMIO_Q, u64, u32);
> > diff --git a/include/linux/peci-cpu.h b/include/linux/peci-cpu.h
> > new file mode 100644
> > index 000000000000..d1b307ec2429
> > --- /dev/null
> > +++ b/include/linux/peci-cpu.h
> > @@ -0,0 +1,38 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/* Copyright (c) 2021 Intel Corporation */
> > +
> > +#ifndef __LINUX_PECI_CPU_H
> > +#define __LINUX_PECI_CPU_H
> > +
> > +#include <linux/types.h>
> > +
> > +#define PECI_PCS_PKG_ID                        0  /* Package Identifier
> > Read */
> > +#define  PECI_PKG_ID_CPU_ID            0x0000  /* CPUID Info */
> > +#define  PECI_PKG_ID_PLATFORM_ID       0x0001  /* Platform ID */
> > +#define  PECI_PKG_ID_DEVICE_ID         0x0002  /* Uncore Device ID */
> > +#define  PECI_PKG_ID_MAX_THREAD_ID     0x0003  /* Max Thread ID */
> > +#define  PECI_PKG_ID_MICROCODE_REV     0x0004  /* CPU Microcode Update
> > Revision */
> > +#define  PECI_PKG_ID_MCA_ERROR_LOG     0x0005  /* Machine Check Status */
> > +#define PECI_PCS_MODULE_TEMP           9  /* Per Core DTS Temperature Read
> > */
> > +#define PECI_PCS_THERMAL_MARGIN                10 /* DTS thermal margin */
> > +#define PECI_PCS_DDR_DIMM_TEMP         14 /* DDR DIMM Temperature */
> > +#define PECI_PCS_TEMP_TARGET           16 /* Temperature Target Read */
> > +#define PECI_PCS_TDP_UNITS             30 /* Units for power/energy
> > registers */
> > +
> > +struct peci_device;
> > +
> > +int peci_temp_read(struct peci_device *device, s16 *temp_raw);
> > +
> > +int peci_pcs_read(struct peci_device *device, u8 index,
> > +                 u16 param, u32 *data);
> > +
> > +int peci_pci_local_read(struct peci_device *device, u8 bus, u8 dev,
> > +                       u8 func, u16 reg, u32 *data);
> > +
> > +int peci_ep_pci_local_read(struct peci_device *device, u8 seg,
> > +                          u8 bus, u8 dev, u8 func, u16 reg, u32 *data);
> > +
> > +int peci_mmio_read(struct peci_device *device, u8 bar, u8 seg,
> > +                  u8 bus, u8 dev, u8 func, u64 address, u32 *data);
> > +
> > +#endif /* __LINUX_PECI_CPU_H */
> > diff --git a/include/linux/peci.h b/include/linux/peci.h
> > index f9f37b874011..31f9e628fd11 100644
> > --- a/include/linux/peci.h
> > +++ b/include/linux/peci.h
> > @@ -9,14 +9,6 @@
> > #include <linux/mutex.h>
> > #include <linux/types.h>
> > 
> > -#define PECI_PCS_PKG_ID                        0  /* Package Identifier
> > Read */
> > -#define  PECI_PKG_ID_CPU_ID            0x0000  /* CPUID Info */
> > -#define  PECI_PKG_ID_PLATFORM_ID       0x0001  /* Platform ID */
> > -#define  PECI_PKG_ID_DEVICE_ID         0x0002  /* Uncore Device ID */
> > -#define  PECI_PKG_ID_MAX_THREAD_ID     0x0003  /* Max Thread ID */
> > -#define  PECI_PKG_ID_MICROCODE_REV     0x0004  /* CPU Microcode Update
> > Revision */
> > -#define  PECI_PKG_ID_MCA_ERROR_LOG     0x0005  /* Machine Check Status */
> > -
> > struct peci_request;
> > 
> > /**
> > -- 
> > 2.31.1



More information about the openbmc mailing list