[PATCH 1/2] ARM: dts: rainier, everest: Add TPM reset GPIO

[Joel Stanley]

The GPIO is used to place the BMC-connected TPM in reset. This state is
latched until the BMC is next reset, blocking access to the TPM for that
boot.

On both machines this net is called TPM_RESET_LATCH_B.

Signed-off-by: Joel Stanley <joel at jms.id.au>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 2 +-
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index aa24cac8e5be..4536cd538af9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -253,7 +253,7 @@ &gpio0 {
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
 	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","","","","I2C_FLASH_MICRO_N","","",
+	/*R0-R7*/	"bmc-tpm-reset","","","","","I2C_FLASH_MICRO_N","","",
 	/*S0-S7*/	"","","","","","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 481d0ee1f85f..06b3d1573780 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -271,7 +271,7 @@ &gpio0 {
 	/*O0-O7*/	"","","","usb-power","","","","",
 	/*P0-P7*/	"","","","","pcieslot-power","","","",
 	/*Q0-Q7*/	"cfam-reset","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","","","","","","","",
 	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
 				"","","","",
 	/*T0-T7*/	"","","","","","","","",
-- 
2.32.0