[PATCH 00/14] Introduce PECI subsystem
Williams, Dan J
dan.j.williams at intel.com
Thu Jul 15 02:51:27 AEST 2021
On Tue, 2021-07-13 at 00:04 +0200, Iwona Winiarska wrote:
> Note: All changes to arch/x86 are contained within patches 01-02.
Hi Iwona,
One meta question first, who is this submission "To:"? Is there an
existing upstream maintainer path for OpenBMC changes? Are you
expecting contributions to this subsystem from others? While Greg
sometimes ends up as default maintainer for new stuff, I wonder if
someone from the OpenBMC commnuity should step up to fill this role?
>
> The Platform Environment Control Interface (PECI) is a communication
> interface between Intel processors and management controllers (e.g.
> Baseboard Management Controller, BMC).
>
> This series adds a PECI subsystem and introduces drivers which run in
> the Linux instance on the management controller (not the main Intel
> processor) and is intended to be used by the OpenBMC [1], a Linux
> distribution for BMC devices.
> The information exposed over PECI (like processor and DIMM
> temperature) refers to the Intel processor and can be consumed by
> daemons running on the BMC to, for example, display the processor
> temperature in its web interface.
>
> The PECI bus is collection of code that provides interface support
> between PECI devices (that actually represent processors) and PECI
> controllers (such as the "peci-aspeed" controller) that allow to
> access physical PECI interface. PECI devices are bound to PECI
> drivers that provides access to PECI services. This series introduces
> a generic "peci-cpu" driver that exposes hardware monitoring
> "cputemp"
> and "dimmtemp" using the auxiliary bus.
>
> Exposing "raw" PECI to userspace, either to write userspace drivers
> or
> for debug/testing purpose was left out of this series to encourage
> writing kernel drivers instead, but may be pursued in the future.
>
> Introducing PECI to upstream Linux was already attempted before [2].
> Since it's been over a year since last revision, and the series
> changed quite a bit in the meantime, I've decided to start from v1.
>
> I would also like to give credit to everyone who helped me with
> different aspects of preliminary review:
> - Pierre-Louis Bossart,
> - Tony Luck,
> - Andy Shevchenko,
> - Dave Hansen.
>
> [1] https://github.com/openbmc/openbmc
> [2]
> https://lore.kernel.org/openbmc/20191211194624.2872-1-jae.hyun.yoo@linux.intel.com/
>
> Iwona Winiarska (12):
> x86/cpu: Move intel-family to arch-independent headers
> x86/cpu: Extract cpuid helpers to arch-independent
> dt-bindings: Add generic bindings for PECI
> dt-bindings: Add bindings for peci-aspeed
> ARM: dts: aspeed: Add PECI controller nodes
> peci: Add core infrastructure
> peci: Add device detection
> peci: Add support for PECI device drivers
> peci: Add peci-cpu driver
> hwmon: peci: Add cputemp driver
> hwmon: peci: Add dimmtemp driver
> docs: Add PECI documentation
>
> Jae Hyun Yoo (2):
> peci: Add peci-aspeed controller driver
> docs: hwmon: Document PECI drivers
>
> .../devicetree/bindings/peci/peci-aspeed.yaml | 111 ++++
> .../bindings/peci/peci-controller.yaml | 28 +
> Documentation/hwmon/index.rst | 2 +
> Documentation/hwmon/peci-cputemp.rst | 93 ++++
> Documentation/hwmon/peci-dimmtemp.rst | 58 ++
> Documentation/index.rst | 1 +
> Documentation/peci/index.rst | 16 +
> Documentation/peci/peci.rst | 48 ++
> MAINTAINERS | 32 ++
> arch/arm/boot/dts/aspeed-g4.dtsi | 14 +
> arch/arm/boot/dts/aspeed-g5.dtsi | 14 +
> arch/arm/boot/dts/aspeed-g6.dtsi | 14 +
> arch/x86/Kconfig | 1 +
> arch/x86/include/asm/cpu.h | 3 -
> arch/x86/include/asm/intel-family.h | 141 +----
> arch/x86/include/asm/microcode.h | 2 +-
> arch/x86/kvm/cpuid.h | 3 +-
> arch/x86/lib/Makefile | 2 +-
> drivers/Kconfig | 3 +
> drivers/Makefile | 1 +
> drivers/edac/mce_amd.c | 3 +-
> drivers/hwmon/Kconfig | 2 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/peci/Kconfig | 31 ++
> drivers/hwmon/peci/Makefile | 7 +
> drivers/hwmon/peci/common.h | 46 ++
> drivers/hwmon/peci/cputemp.c | 503
> +++++++++++++++++
> drivers/hwmon/peci/dimmtemp.c | 508
> ++++++++++++++++++
> drivers/peci/Kconfig | 36 ++
> drivers/peci/Makefile | 10 +
> drivers/peci/controller/Kconfig | 12 +
> drivers/peci/controller/Makefile | 3 +
> drivers/peci/controller/peci-aspeed.c | 501
> +++++++++++++++++
> drivers/peci/core.c | 224 ++++++++
> drivers/peci/cpu.c | 347 ++++++++++++
> drivers/peci/device.c | 211 ++++++++
> drivers/peci/internal.h | 137 +++++
> drivers/peci/request.c | 502
> +++++++++++++++++
> drivers/peci/sysfs.c | 82 +++
> include/linux/peci-cpu.h | 38 ++
> include/linux/peci.h | 93 ++++
> include/linux/x86/cpu.h | 9 +
> include/linux/x86/intel-family.h | 146 +++++
> lib/Kconfig | 5 +
> lib/Makefile | 2 +
> lib/x86/Makefile | 3 +
> {arch/x86/lib => lib/x86}/cpu.c | 2 +-
> 47 files changed, 3902 insertions(+), 149 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/peci/peci-
> aspeed.yaml
> create mode 100644 Documentation/devicetree/bindings/peci/peci-
> controller.yaml
> create mode 100644 Documentation/hwmon/peci-cputemp.rst
> create mode 100644 Documentation/hwmon/peci-dimmtemp.rst
> create mode 100644 Documentation/peci/index.rst
> create mode 100644 Documentation/peci/peci.rst
> create mode 100644 drivers/hwmon/peci/Kconfig
> create mode 100644 drivers/hwmon/peci/Makefile
> create mode 100644 drivers/hwmon/peci/common.h
> create mode 100644 drivers/hwmon/peci/cputemp.c
> create mode 100644 drivers/hwmon/peci/dimmtemp.c
> create mode 100644 drivers/peci/Kconfig
> create mode 100644 drivers/peci/Makefile
> create mode 100644 drivers/peci/controller/Kconfig
> create mode 100644 drivers/peci/controller/Makefile
> create mode 100644 drivers/peci/controller/peci-aspeed.c
> create mode 100644 drivers/peci/core.c
> create mode 100644 drivers/peci/cpu.c
> create mode 100644 drivers/peci/device.c
> create mode 100644 drivers/peci/internal.h
> create mode 100644 drivers/peci/request.c
> create mode 100644 drivers/peci/sysfs.c
> create mode 100644 include/linux/peci-cpu.h
> create mode 100644 include/linux/peci.h
> create mode 100644 include/linux/x86/cpu.h
> create mode 100644 include/linux/x86/intel-family.h
> create mode 100644 lib/x86/Makefile
> rename {arch/x86/lib => lib/x86}/cpu.c (95%)
>
More information about the openbmc
mailing list