Serial over LAN by phosphor-net-ipmid issue

[George Liu]

On Mon, Jul 26, 2021 at 10:33 PM Konstantin Klubnichkin
<kitsok at yandex-team.ru> wrote:
>
> Hello George!
>
> Can you please check if there is /xyz/openbmc_project/ipmi branch in dbus?
> root:/tmp# busctl tree xyz.openbmc_project.Settings | grep sol
>     │ └─/xyz/openbmc_project/ipmi/sol
>     │   └─/xyz/openbmc_project/ipmi/sol/eth0
> root:/tmp#
>
> If it's not there, you need to add it via phosphor-settings-manager.
>
> 12.07.2021, 09:41, "George Hung (洪忠敬)" <george.hung at quantatw.com>:
>
> Hi Cheng,
>
> I tried to use SOL for the latest phosphor-net-ipmid, but it can't work.
>
> I found the commit for SOL commands:
> https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-net-ipmid/+/29703
>
> It removed "setConfParams" function and also disabled to register setting SOL configuration parameters command. (i.e., ipmitool -I lanplus -H x -U x -P x raw 0x0c 0x21 can't be used)
>
> Instead of that, it changed to use the dbus interface to update SOL parameters, but I don't know which process/service to generate the related dbus path/properties for SOL parameters.
>
> Do I miss something to enable or config?

Please refer to: https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/45369

>
>
> Thanks.
>
> Best Regards
> George Hung
>
>
>
>
> --
> Best regards,
> Konstantin Klubnichkin,
> lead firmware engineer,
> server hardware R&D group,
> Yandex Moscow office.
> tel: +7-903-510-33-33
>