July 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Jul 1 00:01:07 EST 2014
Ending: Thu Jul 31 23:53:33 EST 2014
Messages: 857

• [PATCH] powerpc/powernv: Check for IRQHAPPENED before sleeping   Michael Neuling
  • [PATCH] powerpc/powernv: Check for IRQHAPPENED before sleeping   Michael Ellerman
    • [PATCH] powerpc/powernv: Check for IRQHAPPENED before sleeping   Michael Neuling
• [PATCH 0/6 v2] KVM: PPC: Book3e: AltiVec support   Mihai Caraman
  • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Mihai Caraman
    • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Alexander Graf
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   mihai.caraman at freescale.com
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Alexander Graf
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   mihai.caraman at freescale.com
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Scott Wood
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Scott Wood
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Alexander Graf
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Alexander Graf
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Scott Wood
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Alexander Graf
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   mihai.caraman at freescale.com
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   mihai.caraman at freescale.com
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Scott Wood
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   mihai.caraman at freescale.com
      • [PATCH 1/6 v2] KVM: PPC: Book3E: Use common defines for SPE/FP/AltiVec int numbers   Scott Wood
  • [PATCH 2/6 v2] KVM: PPC: Book3E: Refactor SPE/FP exit handling   Mihai Caraman
    • [PATCH 2/6 v2] KVM: PPC: Book3E: Refactor SPE/FP exit handling   Alexander Graf
  • [PATCH 3/6 v2] KVM: PPC: Book3E: Increase FPU laziness   Mihai Caraman
    • [PATCH 3/6 v2] KVM: PPC: Book3E: Increase FPU laziness   Alexander Graf
      • [PATCH 3/6 v2] KVM: PPC: Book3E: Increase FPU laziness   mihai.caraman at freescale.com
      • [PATCH 3/6 v2] KVM: PPC: Book3E: Increase FPU laziness   Alexander Graf
      • [PATCH 3/6 v2] KVM: PPC: Book3E: Increase FPU laziness   Alexander Graf
  • [PATCH 4/6 v2] KVM: PPC: Book3E: Add AltiVec support   Mihai Caraman
    • [PATCH 4/6 v2] KVM: PPC: Book3E: Add AltiVec support   Alexander Graf
      • [PATCH 4/6 v2] KVM: PPC: Book3E: Add AltiVec support   mihai.caraman at freescale.com
    • [PATCH 4/6 v2] KVM: PPC: Book3E: Add AltiVec support   Scott Wood
  • [PATCH 5/6 v2] KVM: PPC: Book3E: Add ONE_REG AltiVec support   Mihai Caraman
    • [PATCH 5/6 v2] KVM: PPC: Book3E: Add ONE_REG AltiVec support   Alexander Graf
      • [PATCH 5/6 v2] KVM: PPC: Book3E: Add ONE_REG AltiVec support   mihai.caraman at freescale.com
      • [PATCH 5/6 v2] KVM: PPC: Book3E: Add ONE_REG AltiVec support   Alexander Graf
  • [PATCH 6/6 v2] KVM: PPC: Book3E: Enable e6500 core   Mihai Caraman
• [PATCH] KVM: PPC: e500: Fix default tlb for victim hint   Scott Wood
  • [PATCH] KVM: PPC: e500: Fix default tlb for victim hint   Alexander Graf
• [PATCH] KVM: PPC: e500: Emulate power management control SPR   Scott Wood
  • [PATCH] KVM: PPC: e500: Emulate power management control SPR   Alexander Graf
• [PATCH] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64   Guenter Roeck
  • [PATCH] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64   Stephen Rothwell
    • [PATCH] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64   Guenter Roeck
  • [PATCH] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64   Guenter Roeck
  • [PATCH] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64   Guenter Roeck
    • [PATCH] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64   Benjamin Herrenschmidt
      • [PATCH] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64   Nick Krause
• [RESEND PATCH] memory: Freescale CoreNet Coherency Fabric error reporting driver   Scott Wood
  • [RESEND PATCH] memory: Freescale CoreNet Coherency Fabric error reporting driver   Bharat.Bhushan at freescale.com
• Regression in 3.15 on POWER8 with multipath SCSI   Paul Mackerras
  • Regression in 3.15 on POWER8 with multipath SCSI   Paul Mackerras
    • Regression in 3.15 on POWER8 with multipath SCSI   Hannes Reinecke
    • Regression in 3.15 on POWER8 with multipath SCSI   Mike Snitzer
      • Regression in 3.15 on POWER8 with multipath SCSI   Bart Van Assche
      • Regression in 3.15 on POWER8 with multipath SCSI   Junichi Nomura
      • Regression in 3.15 on POWER8 with multipath SCSI   Alexey Kardashevskiy
      • [dm-devel] Regression in 3.15 on POWER8 with multipath SCSI   Junichi Nomura
• [PATCH v2 09/10] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Andy Lutomirski
  • [PATCH v2 09/10] arm64,ia64,ppc,s390,sh,tile,um,x86,mm: Remove default gate area   Will Deacon
• [PATCH] powerpc/ucc_geth: deal with a compile warning   Zhao Qiang
• [PATCH v4] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
  • [PATCH v4] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Michael Ellerman
    • [PATCH v4] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
      • [PATCH v4] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Michael Ellerman
      • [PATCH v4] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
    • [PATCH v5 1/2] kprobes/powerpc: Fix arch_deref_entry_point to support ABIv2   Masami Hiramatsu
      • [PATCH v5 1/2] kprobes/powerpc: Fix arch_deref_entry_point to support ABIv2   Masami Hiramatsu
    • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Tony Luck
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Michael Ellerman
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Michael Ellerman
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Michael Ellerman
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Benjamin Herrenschmidt
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Ingo Molnar
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
      • [PATCH v5 2/2] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Ingo Molnar
• [PATCH] Remove FIXME messages in arch/powerpc/sysdev/uic.c   Nicholas Krause
  • [PATCH] Remove FIXME messages in arch/powerpc/sysdev/uic.c   Nicholas Krause
• [PATCH V2] powerpc/powernv: Check for IRQHAPPENED before sleeping   Preeti U Murthy
• Build regressions/improvements in v3.16-rc3   Geert Uytterhoeven
• [PATCH v4] flexcan: add err_irq handler for flexcan   Zhao Qiang
  • [PATCH v4] flexcan: add err_irq handler for flexcan   Marc Kleine-Budde
    • [PATCH v4] flexcan: add err_irq handler for flexcan   qiang.zhao at freescale.com
      • [PATCH v4] flexcan: add err_irq handler for flexcan   Marc Kleine-Budde
      • [PATCH v4] flexcan: add err_irq handler for flexcan   qiang.zhao at freescale.com
      • [PATCH v4] flexcan: add err_irq handler for flexcan   Marc Kleine-Budde
• [PATCH] dmaengine: fix xor sources continuation   xuelin.shi at freescale.com
• [PATCH v2] powerpc/kvm: support to handle sw breakpoint   Madhavan Srinivasan
  • [PATCH v2] powerpc/kvm: support to handle sw breakpoint   Alexander Graf
    • [PATCH v2] powerpc/kvm: support to handle sw breakpoint   Madhavan Srinivasan
    • [PATCH v2] powerpc/kvm: support to handle sw breakpoint   Alexander Graf
      • [PATCH v2] powerpc/kvm: support to handle sw breakpoint   Madhavan Srinivasan
• [1/3,v4] powerpc/fsl-booke: Add support for T2080/T2081 SoC   Scott Wood
  • [1/3,v4] powerpc/fsl-booke: Add support for T2080/T2081 SoC   Scott Wood
• [PATCH V3] powerpc/powernv: Check for IRQHAPPENED before sleeping   Preeti U Murthy
  • [PATCH V3] powerpc/powernv: Check for IRQHAPPENED before sleeping   Michael Ellerman
• [PATCH] KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page   Paul Mackerras
  • [PATCH] KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page   Alexander Graf
• [PATCH 4/6] KVM: PPC: BOOK3S: HV: Use new functions for mapping/unmapping hpte in host   Paul Mackerras
  • [PATCH 4/6] KVM: PPC: BOOK3S: HV: Use new functions for mapping/unmapping hpte in host   Aneesh Kumar K.V
• [PATCH 2/6] KVM: PPC: BOOK3S: HV: Deny virtual page class key update via h_protect   Paul Mackerras
  • [PATCH 2/6] KVM: PPC: BOOK3S: HV: Deny virtual page class key update via h_protect   Aneesh Kumar K.V
• [PATCH 5/6] KVM: PPC: BOOK3S: Use hpte_update_in_progress to track invalid hpte during an hpte update   Paul Mackerras
  • [PATCH 5/6] KVM: PPC: BOOK3S: Use hpte_update_in_progress to track invalid hpte during an hpte update   Aneesh Kumar K.V
• [PATCH 1/3] iommu/fsl: Fix PAMU window size check.   Emil Medve
  • [PATCH 1/3] iommu/fsl: Fix PAMU window size check.   Varun Sethi
  • [PATCH 1/3] iommu/fsl: Fix PAMU window size check.   Joerg Roedel
    • [PATCH 1/3] iommu/fsl: Fix PAMU window size check.   Varun Sethi
• [PATCH v2] spi: deal with a compile warning   Mark Brown
• [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Bjorn Helgaas
  • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   David Laight
    • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Alexander Gordeev
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   David Laight
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Alexander Gordeev
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Bjorn Helgaas
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   David Laight
  • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Alexander Gordeev
    • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Bjorn Helgaas
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Alexander Gordeev
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Alexander Gordeev
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Bjorn Helgaas
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Alexander Gordeev
      • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Bjorn Helgaas
  • [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()   Michael Ellerman
• [PATCH v2] memory: Freescale CoreNet Coherency Fabric error reporting driver   Scott Wood
  • [PATCH v2] memory: Freescale CoreNet Coherency Fabric error reporting driver   Bharat.Bhushan at freescale.com
• Pull request: scottwood/linux.git next   Scott Wood
• [PATCH v5] flexcan: add err_irq handler for flexcan   Zhao Qiang
  • [PATCH v5] flexcan: add err_irq handler for flexcan   Marc Kleine-Budde
• [PATCH 1/2] powerpc/pseries: Use jump labels for hcall tracepoints   Anton Blanchard
  • [PATCH 2/2] powerpc/pseries: optimise hcall tracepoints   Anton Blanchard
• [PATCH 0/3] POWER8 PMU bugfixes   Joel Stanley
  • [PATCH 1/3] powerpc/kvm: Remove redundant save of SIER AND MMCR2   Joel Stanley
    • [PATCH 1/3] powerpc/kvm: Remove redundant save of SIER AND MMCR2   Michael Ellerman
    • [PATCH 1/3] powerpc/kvm: Remove redundant save of SIER AND MMCR2   Paul Mackerras
    • [PATCH 1/3] powerpc/kvm: Remove redundant save of SIER AND MMCR2   Alexander Graf
  • [PATCH 2/3] powerpc/perf: Add PPMU_ARCH_207S define   Joel Stanley
    • [PATCH 2/3] powerpc/perf: Add PPMU_ARCH_207S define   Michael Ellerman
  • [PATCH 3/3] powerpc/perf: Clear MMCR2 when enabling PMU   Joel Stanley
    • [PATCH 3/3] powerpc/perf: Clear MMCR2 when enabling PMU   Michael Ellerman
• [PATCH] powernv: Add OPAL tracepoints   Anton Blanchard
  • [PATCH] powernv: Add OPAL tracepoints   Paul E. McKenney
• [PATCH v6] flexcan: add err_irq handler for flexcan   Zhao Qiang
  • [PATCH v6] flexcan: add err_irq handler for flexcan   Marc Kleine-Budde
• [PATCH] devicetree/binding/powerpc/fsl: Add binding for CPLD   Priyanka Jain
  • [PATCH] devicetree/binding/powerpc/fsl: Add binding for CPLD   Scott Wood
    • [PATCH] devicetree/binding/powerpc/fsl: Add binding for CPLD   Priyanka Jain
• [PATCH] devicetree/bindings: Add binding for micron n25q512a memory   Priyanka Jain
  • [PATCH] devicetree/bindings: Add binding for micron n25q512a memory   Scott Wood
    • [PATCH] devicetree/bindings: Add binding for micron n25q512a memory   Priyanka Jain
      • [PATCH] devicetree/bindings: Add binding for micron n25q512a memory   Scott Wood
      • [PATCH] devicetree/bindings: Add binding for micron n25q512a memory   Priyanka Jain
      • [PATCH] devicetree/bindings: Add binding for micron n25q512a memory   Scott Wood
      • [PATCH] devicetree/bindings: Add binding for micron n25q512a memory   Mark Rutland
• [PATCH 3/5 v4] KVM: PPC: Book3s: Remove kvmppc_read_inst() function   Alexander Graf
  • [PATCH 3/5 v4] KVM: PPC: Book3s: Remove kvmppc_read_inst() function   mihai.caraman at freescale.com
    • [PATCH 3/5 v4] KVM: PPC: Book3s: Remove kvmppc_read_inst() function   Alexander Graf
• [PATCH 4/5 v4] KVM: PPC: Alow kvmppc_get_last_inst() to fail   Alexander Graf
• [PATCH 5/5 v4] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Alexander Graf
• [RFC PATCH 0/4] KVM Book3E support for HTW guests   Mihai Caraman
  • [RFC PATCH 4/4] KVM: PPC: e500mc: Advertise E.PT to support HTW guests   Mihai Caraman
  • [RFC PATCH 0/4] KVM Book3E support for HTW guests   Alexander Graf
• [RFC PATCH 1/4] powerpc/booke64: Add LRAT next and max entries to tlb_core_data structure   Mihai Caraman
• [RFC PATCH 2/4] KVM: PPC: Book3E: Handle LRAT error exception   Mihai Caraman
  • [RFC PATCH 2/4] KVM: PPC: Book3E: Handle LRAT error exception   Alexander Graf
    • [RFC PATCH 2/4] KVM: PPC: Book3E: Handle LRAT error exception   Scott Wood
• [RFC PATCH 3/4] KVM: PPC: e500: TLB emulation for IND entries   Mihai Caraman
  • [RFC PATCH 3/4] KVM: PPC: e500: TLB emulation for IND entries   Scott Wood
• [PATCH 1/2] PCI: Make resetting secondary bus logic common   Bjorn Helgaas
  • [PATCH 1/2] PCI: Make resetting secondary bus logic common   Benjamin Herrenschmidt
• [PATCH] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Stewart Smith
  • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Stewart Smith
    • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Alexander Graf
      • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Stewart Smith
      • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Alexander Graf
      • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Mel Gorman
      • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Alexander Graf
      • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Mel Gorman
      • [PATCH v2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Alexander Graf
    • [PATCH v3] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Stewart Smith
      • [PATCH v3] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Alexander Graf
      • [PATCH v3] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Stewart Smith
      • [PATCH v3] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Alexander Graf
      • [PATCH v3] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Paul Mackerras
      • [PATCH v3] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Stewart Smith
      • [PATCH v4 0/2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV   Stewart Smith
      • [PATCH v4 1/2] Split out struct kvmppc_vcore creation to separate function   Stewart Smith
      • [PATCH v4 1/2] Split out struct kvmppc_vcore creation to separate function   Paul Mackerras
      • [PATCH v4 2/2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Stewart Smith
      • [PATCH v4 2/2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8   Paul Mackerras
      • [PATCH v4 0/2] Use the POWER8 Micro Partition Prefetch Engine in KVM HV   Alexander Graf
• [PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD   Priyanka Jain
  • [PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD   Scott Wood
  • [PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD   Priyanka Jain
    • [PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD   Scott Wood
• [PATCH v2] KVM: PPC: e500: Emulate power management control SPR   Mihai Caraman
  • [PATCH v2] KVM: PPC: e500: Emulate power management control SPR   Alexander Graf
• [PATCH 2/3] iommu/fsl: Fix the device domain attach condition.   Joerg Roedel
  • [PATCH 2/3] iommu/fsl: Fix the device domain attach condition.   Varun Sethi
• [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature   Neelesh Gupta
  • [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature   Guenter Roeck
    • [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature   Benjamin Herrenschmidt
      • [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature   Guenter Roeck
• [PATCH v2 1/3] dmaengine: mpc512x: add device tree binding document   Mark Rutland
• [PATCH] powerpc/fsl-pci: Correct use of ! and &   Himangi Saraogi
• [PATCH] powerpc/mpic_msgr: Use kcalloc and correct the argument to sizeof   Himangi Saraogi
• [PATCH v10 4/7] powerpc: add pmd_[dirty|mkclean] for THP   Minchan Kim
• [PATCH 0/3] iommu/fsl: Fixes for the PAMU driver.   Joerg Roedel
  • [PATCH 0/3] iommu/fsl: Fixes for the PAMU driver.   Varun Sethi
• [PATCH] devicetree/bindings/powerpc/fsl: Add binding for board   Priyanka Jain
  • [PATCH] devicetree/bindings/powerpc/fsl: Add binding for board   Scott Wood
    • [PATCH] devicetree/bindings/powerpc/fsl: Add binding for board   Priyanka Jain
      • [PATCH] devicetree/bindings/powerpc/fsl: Add binding for board   Scott Wood
• [PATCH] of: Add vendor prefix for EON Corporation   Shengzhou Liu
  • [PATCH] of: Add vendor prefix for EON Corporation   Scott Wood
    • [PATCH] of: Add vendor prefix for EON Corporation   Shengzhou.Liu at freescale.com
    • [PATCH] of: Add vendor prefix for EON Corporation   Shengzhou.Liu at freescale.com
• [3/3,v4] powerpc/t2080rdb: Add T2080RDB board support   Shengzhou.Liu at freescale.com
  • [3/3,v4] powerpc/t2080rdb: Add T2080RDB board support   Scott Wood
• [PATCH] ibmvfc: fix little endian issues   Brian King
• Kernel build issues after yesterdays merge by Linus   Anton Blanchard
• Allyesconfig for powerpc still Failing   Nick Krause
  • Allyesconfig for powerpc still Failing   Benjamin Herrenschmidt
    • Allyesconfig for powerpc still Failing   Nick Krause
    • Fwd: Allyesconfig for powerpc still Failing   Nick Krause
  • Allyesconfig for powerpc still Failing   Guenter Roeck
    • Fwd: Allyesconfig for powerpc still Failing   Guenter Roeck
      • Fwd: Fwd: Allyesconfig for powerpc still Failing   Nick Krause
      • Fwd: Fwd: Allyesconfig for powerpc still Failing   Nick Krause
• powerpc allyesconfig fix   Nicholas Krause
  • powerpc allyesconfig fix   Stephen Rothwell
    • Fwd: powerpc allyesconfig fix   Nick Krause
      • Fwd: powerpc allyesconfig fix   Guenter Roeck
• [PATCH] powerpc/cell: Fix compilation with CONFIG_COREDUMP=n   Michael Ellerman
• [PATCH v11 4/7] powerpc: add pmd_[dirty|mkclean] for THP   Minchan Kim
• [PATCH v2 0/3] POWER8 PMU bugfixes   Joel Stanley
  • [PATCH v2 1/3] powerpc/kvm: Remove redundant save of SIER AND MMCR2   Joel Stanley
  • [PATCH v2 2/3] powerpc/perf: Add PPMU_ARCH_207S define   Joel Stanley
  • [PATCH v2 3/3] powerpc/perf: Clear MMCR2 when enabling PMU   Joel Stanley
• [PATCH v5] powerpc/t2080rdb: Add T2080RDB board support   Shengzhou Liu
• [PATCH] powerpc: Clean up MMU_FTRS_A2 and MMU_FTR_TYPE_3E   Michael Ellerman
• Build regressions/improvements in v3.16-rc4   Geert Uytterhoeven
• [PATCH v5] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature   Neelesh Gupta
  • [PATCH v5] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature   Guenter Roeck
• [PATCH][v3]devicetree/binding/powerpc/fsl: Add binding for CPLD   Priyanka Jain
• [PATCH 1/2] powerpc/fsl-booke: Add initial T1040/T1042 RDB board support   Priyanka Jain
• [PATCH 2/2] powerpc/fsl-booke: Add initial T1042RDB_PI board support   Priyanka Jain
  • [2/2] powerpc/fsl-booke: Add initial T1042RDB_PI board support   Scott Wood
    • [2/2] powerpc/fsl-booke: Add initial T1042RDB_PI board support   Priyanka Jain
      • [2/2] powerpc/fsl-booke: Add initial T1042RDB_PI board support   Scott Wood
• [PATCH v12 4/8] powerpc: add pmd_[dirty|mkclean] for THP   Minchan Kim
• [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()   Peter Hurley
  • [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()   Greg Kroah-Hartman
    • [PATCH tty-next 14/22] tty: Remove tty_wait_until_sent_from_close()   Peter Hurley
• [PATCH] powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE   Madhusudanan Kandasamy
  • [PATCH] powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE   Stephen Rothwell
    • [PATCH] powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE   Madhusudanan Kandasamy
• [PATCH 2/9] drivers: base: support cpu cache information interface to userspace via sysfs   Greg Kroah-Hartman
  • [PATCH 2/9] drivers: base: support cpu cache information interface to userspace via sysfs   Sudeep Holla
• [PATCH] powerpc/pseries: dynamically added OF nodes need to call of_node_init   Tyrel Datwyler
  • [PATCH] powerpc/pseries: dynamically added OF nodes need to call of_node_init   Michael Ellerman
    • [PATCH] powerpc/pseries: dynamically added OF nodes need to call of_node_init   Nathan Fontenot
    • [PATCH] powerpc/pseries: dynamically added OF nodes need to call of_node_init   Tyrel Datwyler
• [PATCH 1/9] powerpc: Drop support for pre-POWER4 cpus   Michael Ellerman
  • [PATCH 2/9] powerpc: Remove STAB code   Michael Ellerman
  • [PATCH 3/9] powerpc: Remove MMU_FTR_SLB   Michael Ellerman
  • [PATCH 4/9] powerpc: Pull out ksp_vsid logic into a helper   Michael Ellerman
  • [PATCH 5/9] powerpc: Remove CONFIG_POWER3   Michael Ellerman
  • [PATCH 6/9] powerpc: Remove oprofile RS64 support   Michael Ellerman
  • [PATCH 7/9] powerpc: Remove power3 from comments   Michael Ellerman
  • [PATCH 8/9] powerpc: Remove CONFIG_POWER4   Michael Ellerman
  • [PATCH 9/9] powerpc: Move CLASSIC_PPC into Kconfig and rename   Michael Ellerman
• [PATCH V2] powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE   Madhusudanan Kandasamy
  • [PATCH V2] powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE   Brian W Hart
• [PATCH] powerpc/kvm: Create proper names for the kvm_host_state PMU fields   Michael Ellerman
  • [PATCH] powerpc/kvm: Create proper names for the kvm_host_state PMU fields   Alexander Graf
    • [PATCH] powerpc/kvm: Create proper names for the kvm_host_state PMU fields   Michael Ellerman
• [PATCH 0/6] powerpc/powernv: Support M64 window   Guo Chao
  • [PATCH 1/6] powerpc/powernv: Enable M64 aperatus for PHB3   Guo Chao
    • [PATCH 1/6] powerpc/powernv: Enable M64 aperatus for PHB3   Gavin Shan
    • [PATCH 1/6] powerpc/powernv: Enable M64 aperatus for PHB3   Wei Yang
      • [PATCH 1/6] powerpc/powernv: Enable M64 aperatus for PHB3   Gavin Shan
  • [PATCH 2/6] powerpc/powernv: Allows to freeze PE   Guo Chao
  • [PATCH 3/6] powerpc/powernv: Split ioda_eeh_get_state()   Guo Chao
  • [PATCH 4/6] powerpc/powernv: handle compound PE   Guo Chao
  • [PATCH 5/6] powerpc/powernv: Handle compound PE for EEH   Guo Chao
  • [PATCH 6/6] powerpc/powernv: Handle compound PE in config accessors   Guo Chao
• [PATCH V3] powerpc : Fail remap_4k_pfn() if PFN doesn't fit inside PTE   Madhusudanan Kandasamy
• [PATCH v2] powerpc/pseries: dynamically added OF nodes need to call of_node_init   Tyrel Datwyler
  • [PATCH v2] powerpc/pseries: dynamically added OF nodes need to call of_node_init   Nathan Fontenot
    • [PATCH v2] powerpc/pseries: dynamically added OF nodes need to call of_node_init   Grant Likely
• [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
• [RFC][PATCH 1/2] dma: imx-sdma: Add device to device support   Nicolin Chen
• [RFC, prePATCH] crypto: talitos modified for powerpc 88x security engine   Christophe Leroy
  • [RFC, prePATCH] crypto: talitos modified for powerpc 88x security engine   Herbert Xu
• [PATCH 0/2] PCI/MSI: Remove arch_msi_check_device()   Alexander Gordeev
• [PATCH 1/2] PCI/MSI/PPC: Remove arch_msi_check_device()   Alexander Gordeev
  • [PATCH 1/2] PCI/MSI/PPC: Remove arch_msi_check_device()   Alexander Gordeev
• [PATCH 2/2] PCI/MSI: Remove arch_msi_check_device()   Alexander Gordeev
  • [PATCH 2/2] PCI/MSI: Remove arch_msi_check_device()   Yijing Wang
    • [PATCH 2/2] PCI/MSI: Remove arch_msi_check_device()   Alexander Gordeev
  • [PATCH 2/2] PCI/MSI: Remove arch_msi_check_device()   Bjorn Helgaas
    • [PATCH 2/2] PCI/MSI: Remove arch_msi_check_device()   Alexander Gordeev
• [PATCH 0/7] arch/powerpc: convert single variable sscanf to kstrto<type>   Fabian Frederick
  • [PATCH 1/7] powerpc: fadump: replace sscanf by kstrtoint   Fabian Frederick
  • [PATCH 2/7] powerpc/mv64x60_pci: replace sscanf by kstrtou32   Fabian Frederick
  • [PATCH 3/7] powerpc/powernv: replace sscanf %lx by kstrtoul 16   Fabian Frederick
  • [PATCH 4/7] powerpc/sysfs: replace sscanf by kstrtol   Fabian Frederick
  • [PATCH 5/7] hugetlb: replace sscanf by kstrtoul   Fabian Frederick
  • [PATCH 6/7] powerpc/cell: replace sscanf by kstrtouint   Fabian Frederick
  • [PATCH 7/7] powerpc/pseries: replace sscanf by kstrtoul   Fabian Frederick
• bit fields && data tearing   Oleg Nesterov
  • bit fields && data tearing   Oleg Nesterov
    • bit fields && data tearing   Benjamin Herrenschmidt
      • bit fields && data tearing   Oleg Nesterov
      • bit fields && data tearing   Peter Hurley
      • bit fields && data tearing   Benjamin Herrenschmidt
      • bit fields && data tearing   Peter Hurley
      • bit fields && data tearing   Richard Henderson
• [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Andy Lutomirski
  • [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Andy Lutomirski
    • [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Will Deacon
      • [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Richard Weinberger
      • [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Andy Lutomirski
      • [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Nathan Lynch
      • [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   H. Peter Anvin
• [RFC PATCH V3 06/17] ppc/pnv: allocate pe->iommu_table dynamically   Benjamin Herrenschmidt
• [PATCH] dmaengine: fsl raid parity continuation support   xuelin.shi at freescale.com
• [PATCH] dmaengine: fix potential race condition in fsl raid   xuelin.shi at freescale.com
• [PATCH] Bugfix: powerpc/eeh: Wrong place to call pci_get_slot()   Mike Qiu
  • [PATCH] Bugfix: powerpc/eeh: Wrong place to call pci_get_slot()   Gavin Shan
    • [PATCH] Bugfix: powerpc/eeh: Wrong place to call pci_get_slot()   Mike Qiu
      • [PATCH] Bugfix: powerpc/eeh: Wrong place to call pci_get_slot()   Gavin Shan
• [PATCH v5 0/3] DMA: Freescale: driver cleanups and enhancements   Vinod Koul
• [PATCH] powerpc: Revert removing of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()   Steven Rostedt
  • [PATCH] powerpc: Revert removing of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()   Benjamin Herrenschmidt
    • [PATCH] powerpc: Revert removing of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()   Steven Rostedt
    • [PATCH] powerpc: Revert removing of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()   Steven Rostedt
    • [PATCH] powerpc: Revert removing of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()   Steven Rostedt
      • [PATCH] powerpc: Revert removing of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()   Benjamin Herrenschmidt
      • [PATCH] powerpc: Revert removing of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()   Michael Ellerman
• [PATCH v2] Bugfix: powerpc/eeh: Wrong place to call pci_get_slot()   Mike Qiu
  • [PATCH v2] Bugfix: powerpc/eeh: Wrong place to call pci_get_slot()   Gavin Shan
    • [PATCH v2] Bugfix: powerpc/eeh: Wrong place to call pci_get_slot()   Mike Qiu
• [PATCH v3] powerpc/eeh: Wrong place to call pci_get_slot()   Mike Qiu
• [PATCH 0/2] Bug fix for VFIO EEH   Gavin Shan
• [PATCH 1/2] powerpc/powernv: Fix IOMMU table for VFIO dev   Gavin Shan
• [PATCH 2/2] powerpc/eeh: Fetch IOMMU table in reliable way   Gavin Shan
• [PATCH] ppc/xmon: use isxdigit/isspace/isalnum from ctype.h   Vincent Bernat
  • [PATCH] ppc/xmon: use isxdigit/isspace/isalnum from ctype.h   David Laight
    • [PATCH] ppc/xmon: use isxdigit/isspace/isalnum from ctype.h   Vincent Bernat
      • [PATCH] ppc/xmon: use isspace/isxdigit/isalnum from linux/ctype.h   Vincent Bernat
      • [PATCH] ppc/xmon: use isspace/isxdigit/isalnum from linux/ctype.h   Benjamin Herrenschmidt
• [PATCH v1 00/16] powernv: vfio: Add Dynamic DMA windows (DDW)   Alexey Kardashevskiy
  • [PATCH v1 03/16] powerpc/powernv: Use it_page_shift for TCE invalidation   Alexey Kardashevskiy
  • [PATCH v1 04/16] powerpc/powernv: Use it_page_shift in TCE build   Alexey Kardashevskiy
  • [PATCH v1 05/16] powerpc/powernv: Add a page size parameter to pnv_pci_setup_iommu_table()   Alexey Kardashevskiy
  • [PATCH v1 06/16] powerpc/powernv: Make invalidate() callback an iommu_table callback   Alexey Kardashevskiy
  • [PATCH v1 07/16] powerpc/spapr: vfio: Implement spapr_tce_iommu_ops   Alexey Kardashevskiy
  • [PATCH v1 08/16] powerpc/powernv: Convert/move set_bypass() callback to take_ownership()   Alexey Kardashevskiy
  • [PATCH v1 09/16] powerpc/iommu: Fix IOMMU ownership control functions   Alexey Kardashevskiy
  • [PATCH v1 10/16] powerpc/iommu: Fix missing permission bits in iommu_put_tce_user_mode()   Alexey Kardashevskiy
  • [PATCH v1 11/16] powerpc/iommu: Extend ppc_md.tce_build(_rm) to return old TCE values   Alexey Kardashevskiy
  • [PATCH v1 12/16] powerpc/powernv: Return non-zero TCE from pnv_tce_build   Alexey Kardashevskiy
  • [PATCH v1 13/16] powerpc/iommu: Implement put_page() if TCE had non-zero value   Alexey Kardashevskiy
    • [PATCH v1 13/16] powerpc/iommu: Implement put_page() if TCE had non-zero value   Alexey Kardashevskiy
  • [PATCH v1 14/16] powerpc/powernv: Implement Dynamic DMA windows (DDW) for IODA   Alexey Kardashevskiy
  • [PATCH v1 15/16] vfio: Use it_page_size   Alexey Kardashevskiy
  • [PATCH v1 16/16] vfio: powerpc: Enable Dynamic DMA windows   Alexey Kardashevskiy
• [PATCH v1 01/16] powerpc/iommu: Fix comments with it_page_shift   Alexey Kardashevskiy
• [PATCH v1 02/16] KVM: PPC: Use RCU when adding to arch.spapr_tce_tables   Alexey Kardashevskiy
• [PATCH v1 0/7] powerpc/iommu: kvm: Enable MultiTCE support   Alexey Kardashevskiy
  • [PATCH v1 2/7] powerpc/iommu: Support real mode   Alexey Kardashevskiy
  • [PATCH v1 4/7] KVM: PPC: Replace SPAPR_TCE_SHIFT with IOMMU_PAGE_SHIFT_4K   Alexey Kardashevskiy
  • [PATCH v1 5/7] KVM: PPC: Move reusable bits of H_PUT_TCE handler to helpers   Alexey Kardashevskiy
  • [PATCH v1 6/7] KVM: PPC: Add kvmppc_find_tce_table()   Alexey Kardashevskiy
  • [PATCH v1 7/7] KVM: PPC: Add support for multiple-TCE hcalls   Alexey Kardashevskiy
• [PATCH v1 1/7] powerpc/iommu: Change prototypes for realmode support   Alexey Kardashevskiy
• [PATCH v1 3/7] powerpc/iommu: Clean up IOMMU API   Alexey Kardashevskiy
• [PATCH v1 00/13] powerpc: kvm: Enable in-kernel acceleration for VFIO   Alexey Kardashevskiy
  • [PATCH v1 01/13] KVM: PPC: Account TCE pages in locked_vm   Alexey Kardashevskiy
    • [PATCH v1 01/13] KVM: PPC: Account TCE pages in locked_vm   Alexey Kardashevskiy
  • [PATCH v1 02/13] KVM: PPC: Rework kvmppc_spapr_tce_table to support variable page size   Alexey Kardashevskiy
  • [PATCH v1 03/13] KVM: PPC: Enable IOMMU_API for KVM_BOOK3S_64 permanently   Alexey Kardashevskiy
  • [PATCH v1 04/13] KVM: PPC: Reserve KVM_CAP_SPAPR_TCE_VFIO capability number   Alexey Kardashevskiy
  • [PATCH v1 05/13] KVM: PPC: Reserve KVM_CAP_SPAPR_TCE_64 capability number   Alexey Kardashevskiy
  • [PATCH v1 06/13] KVM: PPC: Add @offset to kvmppc_spapr_tce_table   Alexey Kardashevskiy
  • [PATCH v1 07/13] KVM: PPC: Add support for 64bit TCE windows   Alexey Kardashevskiy
  • [PATCH v1 08/13] KVM: PPC: Add hugepage support for IOMMU in-kernel handling   Alexey Kardashevskiy
  • [PATCH v1 09/13] KVM: PPC: Add page_shift support for in-kernel H_PUT_TCE/etc handlers   Alexey Kardashevskiy
  • [PATCH v1 10/13] KVM: PPC: Fix kvmppc_gpa_to_hva_and_get() to return host physical address   Alexey Kardashevskiy
  • [PATCH v1 11/13] KVM: PPC: Associate IOMMU group with guest copy of TCE table   Alexey Kardashevskiy
  • [PATCH v1 12/13] KVM: PPC: vfio kvm device: support spapr tce   Alexey Kardashevskiy
  • [PATCH v1 13/13] KVM: PPC: Add support for IOMMU in-kernel handling   Alexey Kardashevskiy
• [PATCH QEMU 00/12] vfio: pci: Enable DDW and in-kernel acceleration   Alexey Kardashevskiy
  • [PATCH QEMU 01/12] spapr_iommu: Disable in-kernel IOMMU tables for >4GB windows   Alexey Kardashevskiy
  • [PATCH QEMU 02/12] spapr_pci: Make find_phb()/find_dev() public   Alexey Kardashevskiy
  • [PATCH QEMU 03/12] spapr_iommu: Make spapr_tce_find_by_liobn() public   Alexey Kardashevskiy
  • [PATCH QEMU 04/12] linux headers update for DDW   Alexey Kardashevskiy
  • [PATCH QEMU 05/12] spapr_rtas: Add Dynamic DMA windows (DDW) RTAS calls support   Alexey Kardashevskiy
  • [PATCH QEMU 06/12] spapr: Add "ddw" machine option   Alexey Kardashevskiy
  • [PATCH QEMU 07/12] spapr_pci: Enable DDW   Alexey Kardashevskiy
  • [PATCH QEMU 08/12] spapr_pci_vfio: Enable DDW   Alexey Kardashevskiy
  • [PATCH QEMU 09/12] vfio: Enable DDW ioctls to VFIO IOMMU driver   Alexey Kardashevskiy
  • [PATCH QEMU 10/12] headers: update for KVM_CAP_SPAPR_TCE_64 and VFIO KVM device   Alexey Kardashevskiy
  • [PATCH QEMU 11/12] target-ppc: kvm: make use of KVM_CREATE_SPAPR_TCE_64   Alexey Kardashevskiy
  • [PATCH QEMU 12/12] vfio: Enable in-kernel acceleration via VFIO KVM device   Alexey Kardashevskiy
• [PATCH] powerpc: Move bad_stack() below the fwnmi_data_area   Michael Ellerman
• [PATCH 1/3] powerpc: Update comments in irqflags.h   Michael Ellerman
  • [PATCH 2/3] powerpc: Document register clobbering in EXCEPTION_COMMON()   Michael Ellerman
  • [PATCH 3/3] powerpc: Remove misleading DISABLE_INTS   Michael Ellerman
• [PATCH 1/3] powerpc: Add machine_early_initcall()   Michael Ellerman
  • [PATCH 2/3] powerpc/powernv: Switch powernv drivers to use machine_xxx_initcall()   Michael Ellerman
  • [PATCH 3/3] powerpc/pseries: Switch pseries drivers to use machine_xxx_initcall()   Michael Ellerman
    • [PATCH v2 3/3] powerpc/pseries: Switch pseries drivers to use machine_xxx_initcall()   Michael Ellerman
• [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Aneesh Kumar K.V
  • [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Aneesh Kumar K.V
    • [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Benjamin Herrenschmidt
      • [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Aneesh Kumar K.V
      • [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Benjamin Herrenschmidt
      • [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Aneesh Kumar K.V
      • [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Benjamin Herrenschmidt
      • [PATCH] powerpc: thp: Add write barrier after updating the valid bit   Aneesh Kumar K.V
• [PATCH 1/2] powerpc: thp: don't recompute vsid and ssize in loop on invalidate   Aneesh Kumar K.V
  • [PATCH 2/2] powerpc: thp: invalidate old 64K based hash page mapping before insert   Aneesh Kumar K.V
    • [PATCH 2/2] powerpc: thp: invalidate old 64K based hash page mapping before insert   Benjamin Herrenschmidt
      • [PATCH 2/2] powerpc: thp: invalidate old 64K based hash page mapping before insert   Aneesh Kumar K.V
• [PATCH] powerpc: subpage_protect: Increase the array size to take care of 64TB   Aneesh Kumar K.V
  • [PATCH] powerpc: subpage_protect: Increase the array size to take care of 64TB   Aneesh Kumar K.V
• OF_DYNAMIC node lifecycle   Grant Likely
  • OF_DYNAMIC node lifecycle   Tyrel Datwyler
    • OF_DYNAMIC node lifecycle   Grant Likely
      • OF_DYNAMIC node lifecycle   Grant Likely
      • OF_DYNAMIC node lifecycle   Nathan Fontenot
      • OF_DYNAMIC node lifecycle   Grant Likely
• [PATCH 0/6] EEH Cleanup   Gavin Shan
  • [PATCH 2/6] powerpc/eeh: Selectively enable IO for error log   Gavin Shan
  • [PATCH 5/6] powerpc/eeh: Make diag-data not endian dependent   Gavin Shan
  • [PATCH 6/6] powerpc/eeh: Aux PE data for error log   Gavin Shan
• [PATCH 1/6] powerpc/eeh: Refactor EEH flag accessors   Gavin Shan
  • [PATCH 1/6] powerpc/eeh: Refactor EEH flag accessors   David Laight
    • [PATCH 1/6] powerpc/eeh: Refactor EEH flag accessors   Gavin Shan
• [PATCH 3/6] powerpc/eeh: Reduce lines of log dump   Gavin Shan
  • [PATCH 3/6] powerpc/eeh: Reduce lines of log dump   David Laight
    • [PATCH 3/6] powerpc/eeh: Reduce lines of log dump   Gavin Shan
• [PATCH 4/6] powerpc/eeh: Replace pr_warning() with pr_warn()   Gavin Shan
• [PATCH v2 0/6] powerpc/powernv: Support M64 window   Guo Chao
  • [PATCH v2 1/6] powerpc/powernv: Enable M64 aperatus for PHB3   Guo Chao
    • [PATCH v2 1/6] powerpc/powernv: Enable M64 aperatus for PHB3   Gavin Shan
  • [PATCH v2 2/6] powerpc/powernv: Allow to freeze PE   Guo Chao
  • [PATCH v2 3/6] powerpc/powernv: Split ioda_eeh_get_state()   Guo Chao
  • [PATCH v2 4/6] powerpc/powernv: Handle compound PE   Guo Chao
  • [PATCH v2 5/6] powerpc/powernv: Handle compound PE for EEH   Guo Chao
  • [PATCH v2 6/6] powerpc/powernv: Handle compound PE in config accessors   Guo Chao
• [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding   Shruti Kanetkar
  • [PATCH v2 2/7] net/fsl_pq_mdio: Document supported compatibles   Shruti Kanetkar
  • [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan   Shruti Kanetkar
    • [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan   Scott Wood
  • [PATCH v2 4/7] powerpc/corenet: Add DPAA FMan support to the SoC device tree(s)   Shruti Kanetkar
  • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Shruti Kanetkar
    • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Scott Wood
      • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Emil Medve
      • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Scott Wood
      • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Emil Medve
      • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Scott Wood
      • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Emil Medve
      • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Scott Wood
      • [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)   Emil Medve
  • [PATCH v2 6/7] powerpc/corenet: Enable muxing MDIO buses via GPIO   Shruti Kanetkar
  • [PATCH v2 7/7] powerpc/corenet: Enable muxing MDIO buses via FPGA   Shruti Kanetkar
  • [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding   Shaohui Xie
    • [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding   Scott Wood
      • [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding   Emil Medve
    • [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding   Emil Medve
• [PATCH v2 0/6] EEH Cleanup   Gavin Shan
  • [PATCH v2 1/6] powerpc/eeh: Refactor EEH flag accessors   Gavin Shan
  • [PATCH v2 3/6] powerpc/eeh: Reduce lines of log dump   Gavin Shan
  • [PATCH v2 4/6] powerpc/eeh: Replace pr_warning() with pr_warn()   Gavin Shan
  • [PATCH v2 5/6] powerpc/eeh: Make diag-data not endian dependent   Gavin Shan
  • [PATCH v2 6/6] powerpc/eeh: Aux PE data for error log   Gavin Shan
• [PATCH v2 2/6] powerpc/eeh: Selectively enable IO for error log   Gavin Shan
• [PATCH] powerpc: Document how we set AIL on guest kernels   Michael Ellerman
• [RESEND PATCH v5] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
  • [RESEND PATCH v5] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Ingo Molnar
    • [RESEND PATCH v5] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
      • [RESEND PATCH v5] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
• [PATCH v3 -next 5/9] CMA: generalize CMA reserved area management functionality   Marek Szyprowski
  • [PATCH] CMA: generalize CMA reserved area management functionality (fixup)   Marek Szyprowski
    • [PATCH] CMA: generalize CMA reserved area management functionality (fixup)   Andrew Morton
      • [PATCH] CMA: generalize CMA reserved area management functionality (fixup)   Marek Szyprowski
• spi, spi_fsl-spi.c not working?   Heiko Schocher
  • spi, spi_fsl-spi.c not working?   Mark Brown
    • spi, spi_fsl-spi.c not working?   Heiko Schocher
• [PATCH V3 0/3] Add new PowerPC specific ELF core notes   Anshuman Khandual
  • [PATCH V3 0/3] Add new PowerPC specific ELF core notes   Benjamin Herrenschmidt
    • [PATCH V3 0/3] Add new PowerPC specific ELF core notes   Michael Neuling
      • [PATCH V3 0/3] Add new PowerPC specific ELF core notes   Sam Bobroff
      • [PATCH V3 0/3] Add new PowerPC specific ELF core notes   Anshuman Khandual
  • [PATCH V3 0/3] Add new PowerPC specific ELF core notes   Sam Bobroff
• [PATCH] selftests/powerpc: Add test of L3 bank handling   Michael Ellerman
• [PATCH v5 0/5] Read guest last instruction from kvmppc_get_last_inst()   Mihai Caraman
  • [PATCH v5 1/5] KVM: PPC: e500mc: Revert "add load inst fixup"   Mihai Caraman
  • [PATCH v5 2/5] KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1   Mihai Caraman
  • [PATCH v5 3/5] KVM: PPC: Book3s: Remove kvmppc_read_inst() function   Mihai Caraman
    • [PATCH v5 3/5] KVM: PPC: Book3s: Remove kvmppc_read_inst() function   Alexander Graf
  • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   Mihai Caraman
    • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   Alexander Graf
      • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   mihai.caraman at freescale.com
      • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   mihai.caraman at freescale.com
      • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   Alexander Graf
      • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   mihai.caraman at freescale.com
      • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   Alexander Graf
      • [PATCH v5 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   mihai.caraman at freescale.com
  • [PATCH v5 5/5] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Mihai Caraman
  • [PATCH v5 0/5] Read guest last instruction from kvmppc_get_last_inst()   Alexander Graf
• [PATCH v6] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64   Masami Hiramatsu
• [PATCH 0/2] ASoC: fsl_sai: Two bug fixes for fsl_sai driver   Nicolin Chen
  • [PATCH 1/2] ASoC: fsl_sai: Reset FIFOs after disabling TE/RE   Nicolin Chen
    • [PATCH 1/2] ASoC: fsl_sai: Reset FIFOs after disabling TE/RE   Nicolin Chen
      • [PATCH 1/2] ASoC: fsl_sai: Reset FIFOs after disabling TE/RE   Nicolin Chen
      • [PATCH 1/2] ASoC: fsl_sai: Reset FIFOs after disabling TE/RE   Mark Brown
      • [PATCH 1/2] ASoC: fsl_sai: Reset FIFOs after disabling TE/RE   Nicolin Chen
  • [PATCH 2/2] ASoC: fsl_sai: Fix incorrect register writing in fsl_sai_isr()   Nicolin Chen
  • [PATCH 0/2] ASoC: fsl_sai: Two bug fixes for fsl_sai driver   Li.Xiubo at freescale.com
• [PATCH v4 0/6] Per-user clock constraints   Tomeu Vizoso
  • [PATCH v4 1/6] clk: Add temporary mapping to the existing API   Tomeu Vizoso
  • [PATCH v4 2/6] ASoC: mxs-saif: fix mixed use of public and provider clk API   Tomeu Vizoso
    • [PATCH v4 2/6] ASoC: mxs-saif: fix mixed use of public and provider clk API   Mark Brown
  • [PATCH v4 3/6] clk: Move all drivers to use internal API   Tomeu Vizoso
  • [PATCH v4 4/6] clk: use struct clk only for external API   Tomeu Vizoso
  • [PATCH v4 5/6] clk: per-user clock accounting for debug   Tomeu Vizoso
  • [PATCH v4 6/6] clk: Add floor and ceiling constraints to clock rates   Tomeu Vizoso
    • [PATCH v4 6/6] clk: Add floor and ceiling constraints to clock rates   Stephen Warren
      • [PATCH v4 6/6] clk: Add floor and ceiling constraints to clock rates   Tomeu Vizoso
• [RFC 0/2] Memoryless nodes and kworker   Nishanth Aravamudan
  • [RFC 1/2] workqueue: use the nearest NUMA node, not the local one   Nishanth Aravamudan
    • [RFC 2/2] powerpc: reorder per-cpu NUMA information's initialization   Nishanth Aravamudan
    • [RFC 1/2] workqueue: use the nearest NUMA node, not the local one   Lai Jiangshan
      • [RFC 1/2] workqueue: use the nearest NUMA node, not the local one   Nish Aravamudan
  • [RFC 0/2] Memoryless nodes and kworker   Tejun Heo
    • [RFC 0/2] Memoryless nodes and kworker   Nish Aravamudan
    • [RFC 0/2] Memoryless nodes and kworker   Tejun Heo
      • [RFC 0/2] Memoryless nodes and kworker   Tejun Heo
      • [RFC 0/2] Memoryless nodes and kworker   Nish Aravamudan
      • [RFC 0/2] Memoryless nodes and kworker   Tejun Heo
      • [RFC 0/2] Memoryless nodes and kworker   Nish Aravamudan
      • [RFC 0/2] Memoryless nodes and kworker   Tejun Heo
• [PATCH] powerpc: Add cputable definition for POWER8 DD1   Joel Stanley
  • [PATCH] powerpc: Add cputable definition for POWER8 DD1   Michael Neuling
    • [PATCH] powerpc: Add cputable definition for POWER8 DD1   Benjamin Herrenschmidt
• Allyesconfig Still Failing   Nick Krause
• Fix mes in crash.c   Nick Krause
• [PATCH v13 4/8] powerpc: add pmd_[dirty|mkclean] for THP   Minchan Kim
• [PATCH 0/5] memory-hotplug: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH 3/5] memory-hotplug: ia64: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH 4/5] memory-hotplug: sh: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH 5/5] memory-hotplug: powerpc: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH 0/5] memory-hotplug: suitable memory should go to ZONE_MOVABLE   Zhang Yanfei
    • [PATCH 0/5] memory-hotplug: suitable memory should go to ZONE_MOVABLE   Wang Nan
• [PATCH 1/5] memory-hotplug: x86_64: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH 1/5] memory-hotplug: x86_64: suitable memory should go to ZONE_MOVABLE   Dave Hansen
• [PATCH 2/5] memory-hotplug: x86_32: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH 2/5] memory-hotplug: x86_32: suitable memory should go to ZONE_MOVABLE   Wang Nan
• [PATCH] powerpc : dma-mapping : Check null condition for dev->archdata.dma_ops   Nikhil Badola
  • [PATCH] powerpc : dma-mapping : Check null condition for dev->archdata.dma_ops   Denis Kirjanov
    • [PATCH] powerpc : dma-mapping : Check null condition for dev->archdata.dma_ops   nikhil.badola at freescale.com
• [PATCH] Add support for hardware threads on e6500.   Scott Wood
  • [PATCH] Add support for hardware threads on e6500.   Tudor Laurentiu
• [PATCH] powerpc: Fix bugs in emulate_step()   Paul Mackerras
• [RESEND PATCH] powerpc/fsl-pci: Correct use of ! and &   Himangi Saraogi
• [RESEND PATCH] powerpc/mpic_msgr: Use kcalloc and correct the argument to sizeof   Himangi Saraogi
• [PATCH -next] powerpc: Fix return value check in hsta_msi_probe()   weiyj_lk at 163.com
• [PATCH 00/30] drivers/net: remove unnecessary break after return   Fabian Frederick
  • [PATCH 00/30] drivers/net: remove unnecessary break after return   David Miller
    • [PATCH 00/30] drivers/net: remove unnecessary break after return   Fabian Frederick
• [PATCH 26/30] ucc_geth: remove unnecessary break after return   Fabian Frederick
• [PATCH v3 0/3] dmaengine: mpc512x: add device tree binding document and DMA channel lookup   Alexander Popov
  • [PATCH v3 0/3] dmaengine: mpc512x: add device tree binding document and DMA channel lookup   Vinod Koul
• [PATCH v2 0/7] memory-hotplug: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH v2 1/7] memory-hotplug: add zone_for_memory() for selecting zone for new memory   Wang Nan
    • [PATCH v2 1/7] memory-hotplug: add zone_for_memory() for selecting zone for new memory   Sergei Shtylyov
  • [PATCH v2 5/7] memory-hotplug: ppc: suitable memory should go to ZONE_MOVABLE   Wang Nan
  • [PATCH v2 7/7] memory-hotplug: tile: suitable memory should go to ZONE_MOVABLE   Wang Nan
    • [PATCH v2 7/7] memory-hotplug: tile: suitable memory should go to ZONE_MOVABLE   Wang Nan
• [PATCH v2 2/7] memory-hotplug: x86_64: suitable memory should go to ZONE_MOVABLE   Wang Nan
• [PATCH v2 3/7] memory-hotplug: x86_32: suitable memory should go to ZONE_MOVABLE   Wang Nan
• [PATCH v2 4/7] memory-hotplug: ia64: suitable memory should go to ZONE_MOVABLE   Wang Nan
• [PATCH v2 6/7] memory-hotplug: sh: suitable memory should go to ZONE_MOVABLE   Wang Nan
• [PATCH 1/3] selftests/powerpc: Count instructions under scheduler pressure   Michael Ellerman
  • [PATCH 2/3] selftests/powerpc: Count more instructions   Michael Ellerman
  • [PATCH 3/3] selftests/powerpc: Count decimal numbers of instructions   Michael Ellerman
• [PATCH v3 0/6] Support M64 Window   Gavin Shan
• [PATCH v3 1/6] powerpc/powernv: Enable M64 aperatus for PHB3   Gavin Shan
• [PATCH v3 2/6] powerpc/powernv: Allow to freeze PE   Gavin Shan
• [PATCH v3 3/6] powerpc/powernv: Split ioda_eeh_get_state()   Gavin Shan
• [PATCH v3 4/6] powerpc/powernv: Handle compound PE   Gavin Shan
• [PATCH v3 5/6] powerpc/powernv: Handle compound PE for EEH   Gavin Shan
• [PATCH v3 6/6] powerpc/powernv: Handle compound PE in config accessors   Gavin Shan
• [PATCH v1 2/3] powerpc/powernv: Support PCI error injection   Mike Qiu
  • [PATCH v1 2/3] powerpc/powernv: Support PCI error injection   Benjamin Herrenschmidt
    • [PATCH v1 2/3] powerpc/powernv: Support PCI error injection   Mike Qiu
      • [PATCH v1 2/3] powerpc/powernv: Support PCI error injection   Benjamin Herrenschmidt
      • [PATCH v1 2/3] powerpc/powernv: Support PCI error injection   Gavin Shan
      • [PATCH v1 2/3] powerpc/powernv: Support PCI error injection   Mike Qiu
• [PATCH powerpc] use _GLOBAL_TOC for memmove   Li Zhong
• [PATCH 16/43] powerpc: Use get_signal() signal_setup_done()   Richard Weinberger
• [PATCH 43/43] powerpc: Use sigsp()   Richard Weinberger
• [RFC PATCH 2/3] topology: support node_numa_mem() for determining the fallback node   Nishanth Aravamudan
  • [RFC PATCH 2/3] topology: support node_numa_mem() for determining the fallback node   David Rientjes
    • [RFC PATCH 2/3] topology: support node_numa_mem() for determining the fallback node   Nishanth Aravamudan
      • [RFC PATCH 2/3] topology: support node_numa_mem() for determining the fallback node   Tejun Heo
      • [RFC PATCH 2/3] topology: support node_numa_mem() for determining the fallback node   Nishanth Aravamudan
      • [RFC PATCH 2/3] topology: support node_numa_mem() for determining the fallback node   David Rientjes
• [PATCH] powerpc/perf/hv-24x7: Use kmem_cache_free   Himangi Saraogi
• [PATCH v2 00/18] powernv: vfio: Add Dynamic DMA windows (DDW)   Alexey Kardashevskiy
  • [PATCH v2 01/18] powerpc/iommu: Fix comments with it_page_shift   Alexey Kardashevskiy
  • [PATCH v2 02/18] KVM: PPC: Use RCU when adding to arch.spapr_tce_tables   Alexey Kardashevskiy
  • [PATCH v2 03/18] KVM: PPC: Account TCE pages in locked_vm   Alexey Kardashevskiy
    • [PATCH v2 03/18] KVM: PPC: Account TCE pages in locked_vm   Gavin Shan
      • [PATCH v2 03/18] KVM: PPC: Account TCE pages in locked_vm   Alexey Kardashevskiy
  • [PATCH v2 04/18] vfio: powerpc: Move locked_vm accounting to a helper   Alexey Kardashevskiy
  • [PATCH v2 05/18] powerpc/powernv: Use it_page_shift for TCE invalidation   Alexey Kardashevskiy
  • [PATCH v2 06/18] powerpc/powernv: Use it_page_shift in TCE build   Alexey Kardashevskiy
    • [PATCH v2 06/18] powerpc/powernv: Use it_page_shift in TCE build   Gavin Shan
      • [PATCH v2 06/18] powerpc/powernv: Use it_page_shift in TCE build   Alexey Kardashevskiy
  • [PATCH v2 07/18] powerpc/powernv: Add a page size parameter to pnv_pci_setup_iommu_table()   Alexey Kardashevskiy
  • [PATCH v2 08/18] powerpc/powernv: Make invalidate() callback an iommu_table callback   Alexey Kardashevskiy
  • [PATCH v2 09/18] powerpc/spapr: vfio: Implement spapr_tce_iommu_ops   Alexey Kardashevskiy
  • [PATCH v2 10/18] powerpc/powernv: Convert/move set_bypass() callback to take_ownership()   Alexey Kardashevskiy
  • [PATCH v2 11/18] powerpc/iommu: Fix IOMMU ownership control functions   Alexey Kardashevskiy
  • [PATCH v2 12/18] powerpc/iommu: Fix missing permission bits in iommu_put_tce_user_mode()   Alexey Kardashevskiy
  • [PATCH v2 13/18] powerpc/iommu: Extend ppc_md.tce_build(_rm) to return old TCE values   Alexey Kardashevskiy
  • [PATCH v2 14/18] powerpc/powernv: Return non-zero TCE from pnv_tce_build   Alexey Kardashevskiy
  • [PATCH v2 15/18] powerpc/iommu: Implement put_page() if TCE had non-zero value   Alexey Kardashevskiy
  • [PATCH v2 16/18] powerpc/powernv: Implement Dynamic DMA windows (DDW) for IODA   Alexey Kardashevskiy
  • [PATCH v2 17/18] vfio: Use it_page_size   Alexey Kardashevskiy
  • [PATCH v2 18/18] vfio: powerpc: Enable Dynamic DMA windows   Alexey Kardashevskiy
• [PATCH] powerpc/perf: Fix MMCR2 handling for EBB   Michael Ellerman
• [PATCH 01/10] selftests/powerpc: Don't ignore errors from sub Makefiles   Michael Ellerman
  • [PATCH 02/10] selftests/powerpc: Fix parse_proc_maps()   Michael Ellerman
  • [PATCH 03/10] selftests/powerpc: Move core_busy_loop() into asm   Michael Ellerman
  • [PATCH 04/10] selftests/powerpc: Add test of L3 bank handling   Michael Ellerman
  • [PATCH 05/10] selftests/powerpc: Count instructions under scheduler pressure   Michael Ellerman
  • [PATCH 06/10] selftests/powerpc: Count more instructions & use decimal   Michael Ellerman
  • [PATCH 07/10] selftests/powerpc: Dump MMCR2 as part of the EBB HW state   Michael Ellerman
  • [PATCH 08/10] selftests/powerpc: Add cycles test with MMCR2 handling   Michael Ellerman
  • [PATCH 09/10] selftests/powerpc: Add a routine for retrieving an AUXV entry   Michael Ellerman
  • [PATCH 10/10] selftests/powerpc: Add test of per-event excludes   Michael Ellerman
• [PATCH 1/2] powerpc/powernv: Change BUG_ON to WARN_ON in elog code   Vasant Hegde
  • [PATCH 2/2] powerpc/powernv: Improve error message   Vasant Hegde
    • [PATCH 2/2] powerpc/powernv: Improve error message   Stewart Smith
  • [PATCH 1/2] powerpc/powernv: Change BUG_ON to WARN_ON in elog code   Stewart Smith
• [PATCH 1/2] printk: Add function to return log buffer address and size   Vasant Hegde
• [PATCH 2/2] powerpc/powernv: Interface to add opal dump region   Vasant Hegde
  • [PATCH 2/2] powerpc/powernv: Interface to add opal dump region   Stewart Smith
• [PATCH 1/3] powerpc/perf: Clear all MMCR settings before calling compute_mmcr()   Michael Ellerman
  • [PATCH 2/3] powerpc/perf: Pass the struct perf_events down to compute_mmcr()   Michael Ellerman
  • [PATCH 3/3] powerpc/perf: Add per-event excludes on Power8   Michael Ellerman
• [PATCH 0/3] ASoC: fsl_sai: Fix some issues in fsl_sai_trigger()   Nicolin Chen
  • [PATCH 1/3] ASoC: fsl_sai: Reduce race condition during TE/RE enabling   Nicolin Chen
  • [PATCH 2/3] ASoC: fsl_sai: Don't reset FIFO until TE/RE bit is unset   Nicolin Chen
  • [PATCH 3/3] ASoC: fsl_sai: Improve enable flow in fsl_sai_trigger()   Nicolin Chen
  • [PATCH 0/3] ASoC: fsl_sai: Fix some issues in fsl_sai_trigger()   Mark Brown
• [RESEND PATCH] rapidio: add new RapidIO DMA interface routines   Alexandre Bounine
• [PATCH v6 0/5] Read guest last instruction from kvmppc_get_last_inst()   Mihai Caraman
  • [PATCH v6 1/5] KVM: PPC: e500mc: Revert "add load inst fixup"   Mihai Caraman
  • [PATCH v6 2/5] KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1   Mihai Caraman
  • [PATCH v6 3/5] KVM: PPC: Book3s: Remove kvmppc_read_inst() function   Mihai Caraman
  • [PATCH v6 4/5] KVM: PPC: Alow kvmppc_get_last_inst() to fail   Mihai Caraman
  • [PATCH v6 5/5] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation   Mihai Caraman
  • [PATCH v6 0/5] Read guest last instruction from kvmppc_get_last_inst()   Alexander Graf
• [PATCH 1/2] powerpc/booke: Define MSR bits the same way as reg.h   Scott Wood
  • [PATCH v2 2/2] Add support for hardware threads on e6500.   Scott Wood
• [PATCH V2] powerpc, xmon: Enable hardware instruction breakpoint support on POWER8   Anshuman Khandual
• [PATCH V7 00/17] Enable SRIOV on POWER8   Wei Yang
  • [PATCH V7 01/17] PCI/IOV: Export interface for retrieve VF's BDF   Wei Yang
  • [PATCH V7 02/17] PCI/IOV: Get VF BAR size from hardware directly when platform needs   Wei Yang
  • [PATCH V7 03/17] PCI: Add weak pcibios_sriov_resource_alignment() interface   Wei Yang
  • [PATCH V7 04/17] PCI: Take additional IOV BAR alignment in sizing and assigning   Wei Yang
  • [PATCH V7 05/17] powerpc/pci: Don't unset pci resources for VFs   Wei Yang
  • [PATCH V7 06/17] powerpc/pci: Define pcibios_disable_device() on powerpc   Wei Yang
  • [PATCH V7 07/17] powrepc/pci: Refactor pci_dn   Wei Yang
  • [PATCH V7 08/17] powerpc/powernv: Use pci_dn in PCI config accessor   Wei Yang
  • [PATCH V7 09/17] powerpc/powernv: mark IOV BAR with IORESOURCE_ARCH   Wei Yang
  • [PATCH V7 10/17] powerpc/powernv: Allocate pe->iommu_table dynamically   Wei Yang
  • [PATCH V7 11/17] powerpc/powernv: Add function to deconfig a PE   Wei Yang
  • [PATCH V7 12/17] powerpc/powernv: Expand VF resources according to the number of total_pe   Wei Yang
  • [PATCH V7 13/17] powerpc/powernv: Implement pcibios_sriov_resource_alignment on powernv   Wei Yang
  • [PATCH V7 14/17] powerpc/powernv: Shift VF resource with an offset   Wei Yang
  • [PATCH V7 15/17] powerpc/powernv: Allocate VF PE   Wei Yang
  • [PATCH V7 16/17] powerpc/powernv: Expanding IOV BAR, with m64_per_iov supported   Wei Yang
  • [PATCH V7 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3   Wei Yang
  • [PATCH V7 00/17] Enable SRIOV on POWER8   Benjamin Herrenschmidt
• [PATCH V3 2/3] powerpc, ptrace: Enable support for transactional memory register sets   Sam Bobroff
• [RFC][PATCH 0/2] Add ASRC Peripheral to Peripheral driver   Nicolin Chen
• [PATCH v2 0/2] Add Freescale ASRC driver   Nicolin Chen
  • [PATCH v2 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma   Nicolin Chen
    • [PATCH v2 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma   Shawn Guo
  • [PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
    • [PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Tobias Klauser
      • [PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
• [PATCH v3 00/18] powernv: vfio: Add Dynamic DMA windows (DDW)   Alexey Kardashevskiy
  • [PATCH v3 01/18] powerpc/iommu: Fix comments with it_page_shift   Alexey Kardashevskiy
  • [PATCH v3 02/18] KVM: PPC: Use RCU when adding to arch.spapr_tce_tables   Alexey Kardashevskiy
    • [PATCH v3 02/18] KVM: PPC: Use RCU when adding to arch.spapr_tce_tables   Benjamin Herrenschmidt
      • [PATCH v3 02/18] KVM: PPC: Use RCU when adding to arch.spapr_tce_tables   Alexey Kardashevskiy
      • [PATCH v3 02/18] KVM: PPC: Use RCU when adding to arch.spapr_tce_tables   Benjamin Herrenschmidt
  • [PATCH v3 06/18] powerpc/powernv: Use it_page_shift in TCE build   Alexey Kardashevskiy
  • [PATCH v3 07/18] powerpc/powernv: Add a page size parameter to pnv_pci_setup_iommu_table()   Alexey Kardashevskiy
  • [PATCH v3 08/18] powerpc/powernv: Make invalidate() a callback   Alexey Kardashevskiy
  • [PATCH v3 09/18] powerpc/spapr: vfio: Implement spapr_tce_iommu_ops   Alexey Kardashevskiy
  • [PATCH v3 10/18] powerpc/powernv: Convert/move set_bypass() callback to take_ownership()   Alexey Kardashevskiy
    • [PATCH v3 10/18] powerpc/powernv: Convert/move set_bypass() callback to take_ownership()   Benjamin Herrenschmidt
      • [PATCH v3 10/18] powerpc/powernv: Convert/move set_bypass() callback to take_ownership()   Alexey Kardashevskiy
      • [PATCH v3 10/18] powerpc/powernv: Convert/move set_bypass() callback to take_ownership()   Benjamin Herrenschmidt
  • [PATCH v3 11/18] powerpc/iommu: Fix IOMMU ownership control functions   Alexey Kardashevskiy
  • [PATCH v3 12/18] powerpc/iommu: Fix missing permission bits in iommu_put_tce_user_mode()   Alexey Kardashevskiy
    • [PATCH v3 12/18] powerpc/iommu: Fix missing permission bits in iommu_put_tce_user_mode()   Benjamin Herrenschmidt
      • [PATCH v3 12/18] powerpc/iommu: Fix missing permission bits in iommu_put_tce_user_mode()   Alexey Kardashevskiy
      • [PATCH v3 12/18] powerpc/iommu: Fix missing permission bits in iommu_put_tce_user_mode()   Benjamin Herrenschmidt
  • [PATCH v3 13/18] powerpc/iommu: Extend ppc_md.tce_build(_rm) to return old TCE values   Alexey Kardashevskiy
    • [PATCH v3 13/18] powerpc/iommu: Extend ppc_md.tce_build(_rm) to return old TCE values   Benjamin Herrenschmidt
    • [PATCH v3 13/18] powerpc/iommu: Extend ppc_md.tce_build(_rm) to return old TCE values   Benjamin Herrenschmidt
  • [PATCH v3 14/18] powerpc/powernv: Return non-zero TCE from pnv_tce_build   Alexey Kardashevskiy
  • [PATCH v3 15/18] powerpc/iommu: Implement put_page() if TCE had non-zero value   Alexey Kardashevskiy
  • [PATCH v3 16/18] powerpc/powernv: Implement Dynamic DMA windows (DDW) for IODA   Alexey Kardashevskiy
  • [PATCH v3 17/18] vfio: Use it_page_size   Alexey Kardashevskiy
  • [PATCH v3 18/18] vfio: powerpc: Enable Dynamic DMA windows   Alexey Kardashevskiy
• [PATCH v3 03/18] KVM: PPC: Account TCE pages in locked_vm   Alexey Kardashevskiy
  • [PATCH v3 03/18] KVM: PPC: Account TCE pages in locked_vm   Benjamin Herrenschmidt
    • [PATCH v3 03/18] KVM: PPC: Account TCE pages in locked_vm   Alexey Kardashevskiy
      • [PATCH v3 03/18] KVM: PPC: Account TCE pages in locked_vm   Benjamin Herrenschmidt
• [PATCH v3 04/18] vfio: powerpc: Move locked_vm accounting to a helper   Alexey Kardashevskiy
  • [PATCH v3 04/18] vfio: powerpc: Move locked_vm accounting to a helper   Benjamin Herrenschmidt
    • [PATCH v3 04/18] vfio: powerpc: Move locked_vm accounting to a helper   Alexey Kardashevskiy
• [PATCH v3 05/18] powerpc/powernv: Use it_page_shift for TCE invalidation   Alexey Kardashevskiy
• [PATCH] powerpc: fix wrong defintion in boot/io.h   Lucas Tanure
• [PATCH 1/4] powerpc: implement vmemmap_list_free()   Nathan Fontenot
• [PATCH 2/4] powerpc: implement vmemmap_remove_mapping() for BOOK3S   Nathan Fontenot
• [PATCH 3/4] powerpc: implement vmemmap_free()   Nathan Fontenot
• [PATCH 4/4] powerpc: start loop at section start of start in vmemmap_populated()   Nathan Fontenot
• (request for -mm inclusion) Re: [PATCH v3] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Andy Lutomirski
• [PATCH v4] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Andy Lutomirski
  • [PATCH v4] arm64, ia64, ppc, s390, sh, tile, um, x86, mm: Remove default gate area   Michael Ellerman
• Kernel crash caused by cpufreq   Gavin Shan
  • Kernel crash caused by cpufreq   Michael Ellerman
    • Kernel crash caused by cpufreq   Vaidyanathan Srinivasan
• [PATCH v3 0/2] Add Freescale ASRC driver   Nicolin Chen
  • [PATCH v3 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma   Nicolin Chen
  • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
    • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Varka Bhadram
      • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
      • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
      • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Varka Bhadram
      • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
    • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Mark Rutland
      • [PATCH v3 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
• [PATCH v4 0/2] Add Freescale ASRC driver   Nicolin Chen
  • [PATCH v4 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma   Nicolin Chen
  • [PATCH v4 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
    • [PATCH v4 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Varka Bhadram
      • [PATCH v4 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
      • [PATCH v4 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Varka Bhadram
      • [PATCH v4 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
• [PATCH v5 0/2] Add Freescale ASRC driver   Nicolin Chen
  • [PATCH v5 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma   Nicolin Chen
  • [PATCH v5 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
    • [PATCH v5 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Varka Bhadram
      • [PATCH v5 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
      • [PATCH v5 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Varka Bhadram
• [PATCH 3/5] mmc: sdhci-pltfm: Do not use parent as the host's device   Pawel Moll
• [PATCH v2 0/9] drivers: cacheinfo support   Sudeep Holla
  • [PATCH v2 6/9] powerpc: move cacheinfo sysfs to generic cacheinfo infrastructure   Sudeep Holla
• [PATCH] powerpc: fixing endianness of flash_block_list in rtas_flash   Thomas Falcon
  • [PATCH] powerpc: fixing endianness of flash_block_list in rtas_flash   Michael Ellerman
• Build regressions/improvements in v3.16-rc5   Geert Uytterhoeven
• [PATCH] arch: powerpc: kernel: nvram_64.c: Cleaning up missing null-terminate in conjunction with strncpy   Rickard Strandqvist
• [PATCH] arch: powerpc: platforms: powermac: bootx_init.c: Cleaning up missing null-terminate in conjunction with strncpy   Rickard Strandqvist
• [PATCH 3.10 54/56] locking/mutex: Disable optimistic spinning on some architectures   Greg Kroah-Hartman
• [PATCH 3.14 81/87] locking/mutex: Disable optimistic spinning on some architectures   Greg Kroah-Hartman
• [PATCH 3.15 100/109] locking/mutex: Disable optimistic spinning on some architectures   Greg Kroah-Hartman
• [PATCH] arch: powerpc: sysdev: qe_lib: qe.c: Cleaning up in conjunction with strncpy and strcpy   Rickard Strandqvist
• [PATCH] Add Michael Ellerman as powerpc co-maintainer   Benjamin Herrenschmidt
• [PATCH] powerpc: kvm: make the setup of hpte under the protection of KVMPPC_RMAP_LOCK_BIT   Liu Ping Fan
  • [PATCH] powerpc: kvm: make the setup of hpte under the protection of KVMPPC_RMAP_LOCK_BIT   Benjamin Herrenschmidt
    • [PATCH] powerpc: kvm: make the setup of hpte under the protection of KVMPPC_RMAP_LOCK_BIT   Liu ping fan
      • [PATCH] powerpc: kvm: make the setup of hpte under the protection of KVMPPC_RMAP_LOCK_BIT   Benjamin Herrenschmidt
      • [PATCH] powerpc: kvm: make the setup of hpte under the protection of KVMPPC_RMAP_LOCK_BIT   Liu ping fan
• [PATCH 1/4] KVM: PPC: BOOK3S: PR: Emulate virtual timebase register   Alexander Graf
  • [PATCH 1/4] KVM: PPC: BOOK3S: PR: Emulate virtual timebase register   Stewart Smith
• [PATCH] powerpc/e6500: Work around erratum A-008139   Scott Wood
• [PATCH] powerpc/pci: reorder pci bus/bridge unregistration during PHB removal   Tyrel Datwyler
  • [PATCH] powerpc/pci: reorder pci bus/bridge unregistration during PHB removal   Michael Ellerman
    • [PATCH] powerpc/pci: reorder pci bus/bridge unregistration during PHB removal   Tyrel Datwyler
  • [PATCH] powerpc/pci: reorder pci bus/bridge unregistration during PHB removal   Tyrel Datwyler
• [PATCH 0/8] THP fixes for ppc64   Aneesh Kumar K.V
  • [PATCH 1/8] powerpc: thp: Add write barrier after updating the valid bit   Aneesh Kumar K.V
  • [PATCH 2/8] powerpc: thp: don't recompute vsid and ssize in loop on invalidate   Aneesh Kumar K.V
  • [PATCH 3/8] powerpc: thp: invalidate old 64K based hash page mapping before insert of 4k pte   Aneesh Kumar K.V
  • [PATCH 4/8] powerpc: thp: Handle combo pages in invalidate   Aneesh Kumar K.V
  • [PATCH 5/8] powerpc: thp: inalidate with vpn in loop   Aneesh Kumar K.V
  • [PATCH 6/8] powerpc: thp: use ACCESS_ONCE when loading pmdp   Aneesh Kumar K.V
  • [PATCH 7/8] powerpc: mm: Use read barrier when creating real_pte   Aneesh Kumar K.V
  • [PATCH 8/8] powerpc: thp: Add tracepoints to track hugepage invalidate   Aneesh Kumar K.V
• [PATCH v6 0/2] Add Freescale ASRC driver   Nicolin Chen
  • [PATCH v6 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma   Nicolin Chen
  • [PATCH v6 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers   Nicolin Chen
  • [PATCH v6 0/2] Add Freescale ASRC driver   Mark Brown
• [PATCH 0/3] Add HMI handling in Linux host.   Mahesh J Salgaonkar
  • [PATCH 1/3] powerpc/book3s: Add basic infrastructure to handle HMI in Linux.   Mahesh J Salgaonkar
  • [PATCH 2/3] powerpc/powernv: Invoke opal call to handle hmi.   Mahesh J Salgaonkar
  • [PATCH 3/3] powerpc/book3s: handle HMIs for cpus in nap mode.   Mahesh J Salgaonkar
• [patch added to the 3.12 stable tree] locking/mutex: Disable optimistic spinning on some architectures   Jiri Slaby
• [PATCH] net/fsl: fix misspelled word   Shruti Kanetkar
  • [PATCH] net/fsl: fix misspelled word   Scott Wood
• [PATCH] net/fsl: Add format length modifier to avoid negative values   Shruti Kanetkar
• qe: move qe from arch/powerpc to drivers   Scott Wood
• [PATCH v7] flexcan: add err_irq handler for flexcan   Zhao Qiang
• [PATCH 0/4] ASoC: fsl: Add stream names to CPU DAI drivers for DPCM   Nicolin Chen
  • [PATCH 1/4] ASoC: fsl_esai: Add stream names for DPCM usage   Nicolin Chen
  • [PATCH 2/4] ASoC: fsl_sai: Add stream names for DPCM usage   Nicolin Chen
  • [PATCH 3/4] ASoC: fsl_spdif: Add stream names for DPCM usage   Nicolin Chen
  • [PATCH 4/4] ASoC: fsl_ssi: Add stream names for DPCM usage   Nicolin Chen
    • [PATCH 4/4] ASoC: fsl_ssi: Add stream names for DPCM usage   Timur Tabi
• scheduler crash on Power   Sukadev Bhattiprolu
  • scheduler crash on Power   Dietmar Eggemann
• [PATCH v4 00/16] powernv: vfio: Add Dynamic DMA windows (DDW)   Alexey Kardashevskiy
  • [PATCH v4 01/16] rcu: Define notrace version of list_for_each_entry_rcu and list_entry_rcu   Alexey Kardashevskiy
  • [PATCH v4 02/16] KVM: PPC: Use RCU for arch.spapr_tce_tables   Alexey Kardashevskiy
  • [PATCH v4 03/16] mm: Add helpers for locked_vm   Alexey Kardashevskiy
  • [PATCH v4 04/16] KVM: PPC: Account TCE-containing pages in locked_vm   Alexey Kardashevskiy
  • [PATCH v4 05/16] powerpc/iommu: Fix comments with it_page_shift   Alexey Kardashevskiy
  • [PATCH v4 06/16] powerpc/powernv: Make invalidate() a callback   Alexey Kardashevskiy
  • [PATCH v4 07/16] powerpc/spapr: vfio: Implement spapr_tce_iommu_ops   Alexey Kardashevskiy
  • [PATCH v4 08/16] powerpc/powernv: Convert/move set_bypass() callback to take_ownership()   Alexey Kardashevskiy
  • [PATCH v4 09/16] powerpc/iommu: Fix IOMMU ownership control functions   Alexey Kardashevskiy
  • [PATCH v4 10/16] powerpc: Move tce_xxx callbacks from ppc_md to iommu_table   Alexey Kardashevskiy
  • [PATCH v4 11/16] powerpc/powernv: Release replaced TCE   Alexey Kardashevskiy
  • [PATCH v4 12/16] powerpc/pseries/lpar: Enable VFIO   Alexey Kardashevskiy
  • [PATCH v4 13/16] powerpc/powernv: Implement Dynamic DMA windows (DDW) for IODA   Alexey Kardashevskiy
  • [PATCH v4 14/16] vfio: powerpc/spapr: Reuse locked_vm accounting helpers   Alexey Kardashevskiy
  • [PATCH v4 15/16] vfio: powerpc/spapr: Use it_page_size   Alexey Kardashevskiy
  • [PATCH v4 16/16] vfio: powerpc/spapr: Enable Dynamic DMA windows   Alexey Kardashevskiy
    • [PATCH v4 16/16] vfio: powerpc/spapr: Enable Dynamic DMA windows   Alexey Kardashevskiy
• [PATCH RFC] ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support   Nicolin Chen
• [PATCH 3.12 71/94] locking/mutex: Disable optimistic spinning on some architectures   Jiri Slaby
• [PATCH] ASoC: fsl_asrc: Fix sparse warnings in FSL_ASRC_FORMATS due to typo   Nicolin Chen
• [patch -next] ASoC: fsl_asrc: fix an error code in fsl_asrc_probe()   Dan Carpenter
• [PATCH v2 1/2] printk: Add function to return log buffer address and size   Vasant Hegde
  • [PATCH v2 2/2] powerpc/powernv: Interface to register/unregister opal dump region   Vasant Hegde
• [PATCH v4 RESEND 3/6] clk: Move all drivers to use internal API   Tomeu Vizoso
• [PATCH] powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.   Mahesh J Salgaonkar

Last message date: Thu Jul 31 23:53:33 EST 2014
Archived on: Fri Aug 1 03:46:13 EST 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...