[PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers
Nicolin Chen
Guangyu.Chen at freescale.com
Fri Jul 25 12:05:22 EST 2014
Hi Tobias,
On Thu, Jul 24, 2014 at 05:20:45PM +0200, Tobias Klauser wrote:
> On 2014-07-24 at 10:35:29 +0200, Nicolin Chen <nicoleotsuka at gmail.com> wrote:
> > The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
> > signal associated with an input clock into a signal associated with a different
> > output clock. The driver currently works as a Front End of DPCM with other Back
> > Ends DAI links such as ESAI<->CS42888 and SSI<->WM8962 and SAI. It converts the
> > original sample rate to a common rate supported by Back Ends for playback while
> > converts the common rate of Back Ends to a desired rate for capture. It has 3
> > pairs to support three different substreams within totally 10 channels.
> >
> > Signed-off-by: Nicolin Chen <nicoleotsuka at gmail.com>
> > ---
>
> [...]
>
> > --- /dev/null
> > +++ b/sound/soc/fsl/fsl_asrc.c
> > @@ -0,0 +1,1031 @@
>
> [...]
>
> > +static struct platform_driver fsl_asrc_driver = {
> > + .probe = fsl_asrc_probe,
> > + .driver = {
> > + .name = "fsl-asrc",
> > + .owner = THIS_MODULE,
>
> Not necessary, this will be set by module_platform_driver (or
> the expansion of platform_driver_register, respectively).
>
> > + .of_match_table = fsl_asrc_ids,
> > + .pm = &fsl_asrc_pm,
> > + },
> > +};
> > +module_platform_driver(fsl_asrc_driver);
>
> [...]
>
> > --- /dev/null
> > +++ b/sound/soc/fsl/fsl_asrc_dma.c
> > @@ -0,0 +1,384 @@
>
> [...]
>
> > +static int fsl_asrc_dma_pcm_new(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_card *card = rtd->card->snd_card;
> > + struct snd_pcm_substream *substream;
> > + struct snd_pcm *pcm = rtd->pcm;
> > + u64 dma_mask = DMA_BIT_MASK(32);
> > + int ret, i;
> > +
> > + if (!card->dev->dma_mask)
> > + card->dev->dma_mask = &dma_mask;
>
> dma_mask will go out of scope after fsl_asrc_dma_pcm_new returns,
> resulting in a stray pointer in card->dev->dma_mask.
Will fix them in v3.
Thank you
Nicolin
More information about the Linuxppc-dev
mailing list