[PATCH 2/3] powerpc/powernv: Invoke opal call to handle hmi.
Mahesh J Salgaonkar
mahesh at linux.vnet.ibm.com
Tue Jul 29 23:10:07 EST 2014
From: Mahesh Salgaonkar <mahesh at linux.vnet.ibm.com>
When we hit the HMI in Linux, invoke opal call to handle/recover from HMI
errors in real mode and then in virtual mode during check_irq_replay()
invoke opal_poll_events()/opal_do_notifier() to retrieve HMI event from
OPAL and act accordingly.
Now that we are ready to handle HMI interrupt directly in linux, remove
the HMI interrupt registration with firmware.
Signed-off-by: Mahesh Salgaonkar <mahesh at linux.vnet.ibm.com>
---
arch/powerpc/include/asm/opal.h | 47 ++++++
arch/powerpc/include/asm/paca.h | 1
arch/powerpc/platforms/powernv/Makefile | 2
arch/powerpc/platforms/powernv/opal-hmi.c | 188 ++++++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 1
arch/powerpc/platforms/powernv/opal.c | 35 ++++
6 files changed, 267 insertions(+), 7 deletions(-)
create mode 100644 arch/powerpc/platforms/powernv/opal-hmi.c
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index dd1cf8d..b81b99e 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -147,6 +147,7 @@ struct opal_sg_list {
#define OPAL_SET_PARAM 90
#define OPAL_DUMP_RESEND 91
#define OPAL_DUMP_INFO2 94
+#define OPAL_HANDLE_HMI 98
#ifndef __ASSEMBLY__
@@ -240,6 +241,7 @@ enum OpalMessageType {
OPAL_MSG_MEM_ERR,
OPAL_MSG_EPOW,
OPAL_MSG_SHUTDOWN,
+ OPAL_MSG_HMI_EVT,
OPAL_MSG_TYPE_MAX,
};
@@ -502,6 +504,50 @@ struct OpalMemoryErrorData {
} u;
};
+/* HMI interrupt event */
+enum OpalHMI_Version {
+ OpalHMIEvt_V1 = 1,
+};
+
+enum OpalHMI_Severity {
+ OpalHMI_SEV_NO_ERROR = 0,
+ OpalHMI_SEV_WARNING = 1,
+ OpalHMI_SEV_ERROR_SYNC = 2,
+ OpalHMI_SEV_FATAL = 3,
+};
+
+enum OpalHMI_Disposition {
+ OpalHMI_DISPOSITION_RECOVERED = 0,
+ OpalHMI_DISPOSITION_NOT_RECOVERED = 1,
+};
+
+enum OpalHMI_ErrType {
+ OpalHMI_ERROR_MALFUNC_ALERT = 0,
+ OpalHMI_ERROR_PROC_RECOV_DONE,
+ OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN,
+ OpalHMI_ERROR_PROC_RECOV_MASKED,
+ OpalHMI_ERROR_TFAC,
+ OpalHMI_ERROR_TFMR_PARITY,
+ OpalHMI_ERROR_HA_OVERFLOW_WARN,
+ OpalHMI_ERROR_XSCOM_FAIL,
+ OpalHMI_ERROR_XSCOM_DONE,
+ OpalHMI_ERROR_SCOM_FIR,
+ OpalHMI_ERROR_DEBUG_TRIG_FIR,
+ OpalHMI_ERROR_HYP_RESOURCE,
+};
+
+struct OpalHMIEvent {
+ uint8_t version; /* 0x00 */
+ uint8_t severity; /* 0x01 */
+ uint8_t type; /* 0x02 */
+ uint8_t disposition; /* 0x03 */
+ uint8_t reserved_1[4]; /* 0x04 */
+
+ __be64 hmer;
+ /* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
+ __be64 tfmr;
+};
+
enum {
OPAL_P7IOC_DIAG_TYPE_NONE = 0,
OPAL_P7IOC_DIAG_TYPE_RGC = 1,
@@ -860,6 +906,7 @@ int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
uint64_t length);
int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
+int64_t opal_handle_hmi(void);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index bb0bd25..dd799a3 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -171,6 +171,7 @@ struct paca_struct {
* and already using emergency stack.
*/
u16 in_mce;
+ u8 hmi_event_available; /* HMI event is available */
#endif
/* Stuff for accurate time accounting */
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 4ad227d..495fed0 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,7 +1,7 @@
obj-y += setup.o opal-wrappers.o opal.o opal-async.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
-obj-y += opal-msglog.o
+obj-y += opal-msglog.o opal-hmi.o
obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-hmi.c b/arch/powerpc/platforms/powernv/opal-hmi.c
new file mode 100644
index 0000000..97ac8dc
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-hmi.c
@@ -0,0 +1,188 @@
+/*
+ * OPAL hypervisor Maintenance interrupt handling support in PowreNV.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright 2014 IBM Corporation
+ * Author: Mahesh Salgaonkar <mahesh at linux.vnet.ibm.com>
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#include <asm/opal.h>
+#include <asm/cputable.h>
+
+static int opal_hmi_handler_nb_init;
+struct OpalHmiEvtNode {
+ struct list_head list;
+ struct OpalHMIEvent hmi_evt;
+};
+static LIST_HEAD(opal_hmi_evt_list);
+static DEFINE_SPINLOCK(opal_hmi_evt_lock);
+
+static void print_hmi_event_info(struct OpalHMIEvent *hmi_evt)
+{
+ const char *level, *sevstr, *error_info;
+ static const char *hmi_error_types[] = {
+ "Malfunction Alert",
+ "Processor Recovery done",
+ "Processor recovery occurred again",
+ "Processor recovery occurred for masked error",
+ "Timer facility experienced an error",
+ "TFMR SPR is corrupted",
+ "UPS (Uniterrupted Power System) Overflow indication",
+ "An XSCOM operation failure",
+ "An XSCOM operation completed",
+ "SCOM has set a reserved FIR bit to cause recovery",
+ "Debug trigger has set a reserved FIR bit to cause recovery",
+ "A hypervisor resource error occurred"
+ };
+
+ /* Print things out */
+ if (hmi_evt->version != OpalHMIEvt_V1) {
+ pr_err("HMI Interrupt, Unknown event version %d !\n",
+ hmi_evt->version);
+ return;
+ }
+ switch (hmi_evt->severity) {
+ case OpalHMI_SEV_NO_ERROR:
+ level = KERN_INFO;
+ sevstr = "Harmless";
+ break;
+ case OpalHMI_SEV_WARNING:
+ level = KERN_WARNING;
+ sevstr = "";
+ break;
+ case OpalHMI_SEV_ERROR_SYNC:
+ level = KERN_ERR;
+ sevstr = "Severe";
+ break;
+ case OpalHMI_SEV_FATAL:
+ default:
+ level = KERN_ERR;
+ sevstr = "Fatal";
+ break;
+ }
+
+ printk("%s%s Hypervisor Maintenance interrupt [%s]\n",
+ level, sevstr,
+ hmi_evt->disposition == OpalHMI_DISPOSITION_RECOVERED ?
+ "Recovered" : "Not recovered");
+ error_info = hmi_evt->type < ARRAY_SIZE(hmi_error_types) ?
+ hmi_error_types[hmi_evt->type]
+ : "Unknown";
+ printk("%s Error detail: %s\n", level, error_info);
+ printk("%s HMER: %016llx\n", level, be64_to_cpu(hmi_evt->hmer));
+ if ((hmi_evt->type == OpalHMI_ERROR_TFAC) ||
+ (hmi_evt->type == OpalHMI_ERROR_TFMR_PARITY))
+ printk("%s TFMR: %016llx\n", level,
+ be64_to_cpu(hmi_evt->tfmr));
+}
+
+static void hmi_event_handler(struct work_struct *work)
+{
+ unsigned long flags;
+ struct OpalHMIEvent *hmi_evt;
+ struct OpalHmiEvtNode *msg_node;
+ uint8_t disposition;
+
+ spin_lock_irqsave(&opal_hmi_evt_lock, flags);
+ while (!list_empty(&opal_hmi_evt_list)) {
+ msg_node = list_entry(opal_hmi_evt_list.next,
+ struct OpalHmiEvtNode, list);
+ list_del(&msg_node->list);
+ spin_unlock_irqrestore(&opal_hmi_evt_lock, flags);
+
+ hmi_evt = (struct OpalHMIEvent *) &msg_node->hmi_evt;
+ print_hmi_event_info(hmi_evt);
+ disposition = hmi_evt->disposition;
+ kfree(msg_node);
+
+ /*
+ * Check if HMI event has been recovered or not. If not
+ * then we can't continue, invoke panic.
+ */
+ if (disposition != OpalHMI_DISPOSITION_RECOVERED)
+ panic("Unrecoverable HMI exception");
+
+ spin_lock_irqsave(&opal_hmi_evt_lock, flags);
+ }
+ spin_unlock_irqrestore(&opal_hmi_evt_lock, flags);
+}
+
+static DECLARE_WORK(hmi_event_work, hmi_event_handler);
+/*
+ * opal_handle_hmi_event - notifier handler that queues up HMI events
+ * to be preocessed later.
+ */
+static int opal_handle_hmi_event(struct notifier_block *nb,
+ unsigned long msg_type, void *msg)
+{
+ unsigned long flags;
+ struct OpalHMIEvent *hmi_evt;
+ struct opal_msg *hmi_msg = msg;
+ struct OpalHmiEvtNode *msg_node;
+
+ /* Sanity Checks */
+ if (msg_type != OPAL_MSG_HMI_EVT)
+ return 0;
+
+ /* HMI event info starts from param[0] */
+ hmi_evt = (struct OpalHMIEvent *)&hmi_msg->params[0];
+
+ /* Delay the logging of HMI events to workqueue. */
+ msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC);
+ if (!msg_node) {
+ pr_err("HMI: out of memory, Opal message event not handled\n");
+ return -ENOMEM;
+ }
+ memcpy(&msg_node->hmi_evt, hmi_evt, sizeof(struct OpalHMIEvent));
+
+ spin_lock_irqsave(&opal_hmi_evt_lock, flags);
+ list_add(&msg_node->list, &opal_hmi_evt_list);
+ spin_unlock_irqrestore(&opal_hmi_evt_lock, flags);
+
+ schedule_work(&hmi_event_work);
+ return 0;
+}
+
+static struct notifier_block opal_hmi_handler_nb = {
+ .notifier_call = opal_handle_hmi_event,
+ .next = NULL,
+ .priority = 0,
+};
+
+static int __init opal_hmi_handler_init(void)
+{
+ int ret;
+
+ if (!opal_hmi_handler_nb_init) {
+ ret = opal_message_notifier_register(
+ OPAL_MSG_HMI_EVT, &opal_hmi_handler_nb);
+ if (ret) {
+ pr_err("%s: Can't register OPAL event notifier (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+ opal_hmi_handler_nb_init = 1;
+ }
+ return 0;
+}
+subsys_initcall(opal_hmi_handler_init);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 4abbff2..8d98745 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -146,3 +146,4 @@ OPAL_CALL(opal_sync_host_reboot, OPAL_SYNC_HOST_REBOOT);
OPAL_CALL(opal_sensor_read, OPAL_SENSOR_READ);
OPAL_CALL(opal_get_param, OPAL_GET_PARAM);
OPAL_CALL(opal_set_param, OPAL_SET_PARAM);
+OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index af4c5ac..05b24dc 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -192,9 +192,6 @@ static int __init opal_register_exception_handlers(void)
* fwnmi area at 0x7000 to provide the glue space to OPAL
*/
glue = 0x7000;
- opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER,
- 0, glue);
- glue += 128;
opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
#endif
@@ -516,15 +513,41 @@ int opal_machine_check(struct pt_regs *regs)
/* Early hmi handler called in real mode. */
int opal_hmi_exception_early(struct pt_regs *regs)
{
- /* TODO: Call opal hmi handler. */
+ s64 rc;
+
+ /*
+ * call opal hmi handler. Pass paca address as token.
+ * The return value OPAL_SUCCESS is an indication that there is
+ * an HMI event generated waiting to pull by Linux.
+ */
+ rc = opal_handle_hmi();
+ if (rc == OPAL_SUCCESS) {
+ local_paca->hmi_event_available = 1;
+ return 1;
+ }
return 0;
}
/* HMI exception handler called in virtual mode during check_irq_replay. */
int opal_handle_hmi_exception(struct pt_regs *regs)
{
- /* TODO: Retrive and print HMI event from OPAL. */
- return 0;
+ s64 rc;
+ __be64 evt = 0;
+
+ /*
+ * Check if HMI event is available.
+ * if Yes, then call opal_poll_events to pull opal messages and
+ * process them.
+ */
+ if (!local_paca->hmi_event_available)
+ return 0;
+
+ local_paca->hmi_event_available = 0;
+ rc = opal_poll_events(&evt);
+ if (rc == OPAL_SUCCESS && evt)
+ opal_do_notifier(be64_to_cpu(evt));
+
+ return 1;
}
static uint64_t find_recovery_address(uint64_t nip)
More information about the Linuxppc-dev
mailing list