[PATCH v5 5/5] KVM: PPC: Bookehv: Get vcpu's last instruction for emulation

Mihai Caraman mihai.caraman at freescale.com
Thu Jul 17 21:22:28 EST 2014


On book3e, KVM uses load external pid (lwepx) dedicated instruction to read
guest last instruction on the exit path. lwepx exceptions (DTLB_MISS, DSI
and LRAT), generated by loading a guest address, needs to be handled by KVM.
These exceptions are generated in a substituted guest translation context
(EPLC[EGS] = 1) from host context (MSR[GS] = 0).

Currently, KVM hooks only interrupts generated from guest context (MSR[GS] = 1),
doing minimal checks on the fast path to avoid host performance degradation.
lwepx exceptions originate from host state (MSR[GS] = 0) which implies
additional checks in DO_KVM macro (beside the current MSR[GS] = 1) by looking
at the Exception Syndrome Register (ESR[EPID]) and the External PID Load Context
Register (EPLC[EGS]). Doing this on each Data TLB miss exception is obvious
too intrusive for the host.

Read guest last instruction from kvmppc_load_last_inst() by searching for the
physical address and kmap it. This address the TODO for TLB eviction and
execute-but-not-read entries, and allow us to get rid of lwepx until we are
able to handle failures.

A simple stress benchmark shows a 1% sys performance degradation compared with
previous approach (lwepx without failure handling):

time for i in `seq 1 10000`; do /bin/echo > /dev/null; done

real    0m 8.85s
user    0m 4.34s
sys     0m 4.48s

vs

real    0m 8.84s
user    0m 4.36s
sys     0m 4.44s

A solution to use lwepx and to handle its exceptions in KVM would be to temporary
highjack the interrupt vector from host. This imposes additional synchronizations
for cores like FSL e6500 that shares host IVOR registers between hardware threads.
This optimized solution can be later developed on top of this patch.

Signed-off-by: Mihai Caraman <mihai.caraman at freescale.com>
---
v5:
 - return ENULATE_AGAIN in case of failure

v4:
 - add switch and new function when getting last inst earlier
 - use enum instead of prev semnatic
 - get rid of mas0, optimize mas7_mas3
 - give more context in visible messages
 - check storage attributes mismatch on MMUv2
 - get rid of pfn_valid check

v3:
 - reworked patch description
 - use unaltered kmap addr for kunmap
 - get last instruction before beeing preempted

v2:
 - reworked patch description
 - used pr_* functions
 - addressed cosmetic feedback

 arch/powerpc/kvm/booke.c              | 44 +++++++++++++++++
 arch/powerpc/kvm/bookehv_interrupts.S | 37 ++++----------
 arch/powerpc/kvm/e500_mmu_host.c      | 92 +++++++++++++++++++++++++++++++++++
 3 files changed, 145 insertions(+), 28 deletions(-)

diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 34a42b9..843077b 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -869,6 +869,28 @@ static void kvmppc_restart_interrupt(struct kvm_vcpu *vcpu,
 	}
 }
 
+static int kvmppc_resume_inst_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				  enum emulation_result emulated, u32 last_inst)
+{
+	switch (emulated) {
+	case EMULATE_AGAIN:
+		return RESUME_GUEST;
+
+	case EMULATE_FAIL:
+		pr_debug("%s: load instruction from guest address %lx failed\n",
+		       __func__, vcpu->arch.pc);
+		/* For debugging, encode the failing instruction and
+		 * report it to userspace. */
+		run->hw.hardware_exit_reason = ~0ULL << 32;
+		run->hw.hardware_exit_reason |= last_inst;
+		kvmppc_core_queue_program(vcpu, ESR_PIL);
+		return RESUME_HOST;
+
+	default:
+		BUG();
+	}
+}
+
 /**
  * kvmppc_handle_exit
  *
@@ -880,6 +902,8 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	int r = RESUME_HOST;
 	int s;
 	int idx;
+	u32 last_inst = KVM_INST_FETCH_FAILED;
+	enum emulation_result emulated = EMULATE_DONE;
 
 	/* update before a new last_exit_type is rewritten */
 	kvmppc_update_timing_stats(vcpu);
@@ -887,6 +911,20 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	/* restart interrupts if they were meant for the host */
 	kvmppc_restart_interrupt(vcpu, exit_nr);
 
+	/*
+	 * get last instruction before beeing preempted
+	 * TODO: for e6500 check also BOOKE_INTERRUPT_LRAT_ERROR & ESR_DATA
+	 */
+	switch (exit_nr) {
+	case BOOKE_INTERRUPT_DATA_STORAGE:
+	case BOOKE_INTERRUPT_DTLB_MISS:
+	case BOOKE_INTERRUPT_HV_PRIV:
+		emulated = kvmppc_get_last_inst(vcpu, false, &last_inst);
+		break;
+	default:
+		break;
+	}
+
 	local_irq_enable();
 
 	trace_kvm_exit(exit_nr, vcpu);
@@ -895,6 +933,11 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	run->exit_reason = KVM_EXIT_UNKNOWN;
 	run->ready_for_interrupt_injection = 1;
 
+	if (emulated != EMULATE_DONE) {
+		r = kvmppc_resume_inst_load(run, vcpu, emulated, last_inst);
+		goto out;
+	}
+
 	switch (exit_nr) {
 	case BOOKE_INTERRUPT_MACHINE_CHECK:
 		printk("MACHINE CHECK: %lx\n", mfspr(SPRN_MCSR));
@@ -1184,6 +1227,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		BUG();
 	}
 
+out:
 	/*
 	 * To avoid clobbering exit_reason, only check for signals if we
 	 * aren't already exiting to userspace for some other reason.
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index 6ff4480..e000b39 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -121,38 +121,14 @@
 1:
 
 	.if	\flags & NEED_EMU
-	/*
-	 * This assumes you have external PID support.
-	 * To support a bookehv CPU without external PID, you'll
-	 * need to look up the TLB entry and create a temporary mapping.
-	 *
-	 * FIXME: we don't currently handle if the lwepx faults.  PR-mode
-	 * booke doesn't handle it either.  Since Linux doesn't use
-	 * broadcast tlbivax anymore, the only way this should happen is
-	 * if the guest maps its memory execute-but-not-read, or if we
-	 * somehow take a TLB miss in the middle of this entry code and
-	 * evict the relevant entry.  On e500mc, all kernel lowmem is
-	 * bolted into TLB1 large page mappings, and we don't use
-	 * broadcast invalidates, so we should not take a TLB miss here.
-	 *
-	 * Later we'll need to deal with faults here.  Disallowing guest
-	 * mappings that are execute-but-not-read could be an option on
-	 * e500mc, but not on chips with an LRAT if it is used.
-	 */
-
-	mfspr	r3, SPRN_EPLC	/* will already have correct ELPID and EGS */
 	PPC_STL	r15, VCPU_GPR(R15)(r4)
 	PPC_STL	r16, VCPU_GPR(R16)(r4)
 	PPC_STL	r17, VCPU_GPR(R17)(r4)
 	PPC_STL	r18, VCPU_GPR(R18)(r4)
 	PPC_STL	r19, VCPU_GPR(R19)(r4)
-	mr	r8, r3
 	PPC_STL	r20, VCPU_GPR(R20)(r4)
-	rlwimi	r8, r6, EPC_EAS_SHIFT - MSR_IR_LG, EPC_EAS
 	PPC_STL	r21, VCPU_GPR(R21)(r4)
-	rlwimi	r8, r6, EPC_EPR_SHIFT - MSR_PR_LG, EPC_EPR
 	PPC_STL	r22, VCPU_GPR(R22)(r4)
-	rlwimi	r8, r10, EPC_EPID_SHIFT, EPC_EPID
 	PPC_STL	r23, VCPU_GPR(R23)(r4)
 	PPC_STL	r24, VCPU_GPR(R24)(r4)
 	PPC_STL	r25, VCPU_GPR(R25)(r4)
@@ -162,10 +138,15 @@
 	PPC_STL	r29, VCPU_GPR(R29)(r4)
 	PPC_STL	r30, VCPU_GPR(R30)(r4)
 	PPC_STL	r31, VCPU_GPR(R31)(r4)
-	mtspr	SPRN_EPLC, r8
-	isync
-	lwepx   r9, 0, r5
-	mtspr	SPRN_EPLC, r3
+
+	/*
+	 * We don't use external PID support. lwepx faults would need to be
+	 * handled by KVM and this implies aditional code in DO_KVM (for
+	 * DTB_MISS, DSI and LRAT) to check ESR[EPID] and EPLC[EGS] which
+	 * is too intrusive for the host. Get last instuction in
+	 * kvmppc_get_last_inst().
+	 */
+	li	r9, KVM_INST_FETCH_FAILED
 	stw	r9, VCPU_LAST_INST(r4)
 	.endif
 
diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c
index 4385c14..4150826 100644
--- a/arch/powerpc/kvm/e500_mmu_host.c
+++ b/arch/powerpc/kvm/e500_mmu_host.c
@@ -610,11 +610,103 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 eaddr, gpa_t gpaddr,
 	}
 }
 
+#ifdef CONFIG_KVM_BOOKE_HV
+int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
+			  u32 *instr)
+{
+	gva_t geaddr;
+	hpa_t addr;
+	hfn_t pfn;
+	hva_t eaddr;
+	u32 mas1, mas2, mas3;
+	u64 mas7_mas3;
+	struct page *page;
+	unsigned int addr_space, psize_shift;
+	bool pr;
+	unsigned long flags;
+
+	/* Search TLB for guest pc to get the real address */
+	geaddr = kvmppc_get_pc(vcpu);
+
+	addr_space = (vcpu->arch.shared->msr & MSR_IS) >> MSR_IR_LG;
+
+	local_irq_save(flags);
+	mtspr(SPRN_MAS6, (vcpu->arch.pid << MAS6_SPID_SHIFT) | addr_space);
+	mtspr(SPRN_MAS5, MAS5_SGS | vcpu->kvm->arch.lpid);
+	asm volatile("tlbsx 0, %[geaddr]\n" : :
+		     [geaddr] "r" (geaddr));
+	mtspr(SPRN_MAS5, 0);
+	mtspr(SPRN_MAS8, 0);
+	mas1 = mfspr(SPRN_MAS1);
+	mas2 = mfspr(SPRN_MAS2);
+	mas3 = mfspr(SPRN_MAS3);
+#ifdef CONFIG_64BIT
+	mas7_mas3 = mfspr(SPRN_MAS7_MAS3);
+#else
+	mas7_mas3 = ((u64)mfspr(SPRN_MAS7) << 32) | mas3;
+#endif
+	local_irq_restore(flags);
+
+	/*
+	 * If the TLB entry for guest pc was evicted, return to the guest.
+	 * There are high chances to find a valid TLB entry next time.
+	 */
+	if (!(mas1 & MAS1_VALID))
+		return EMULATE_AGAIN;
+
+	/*
+	 * Another thread may rewrite the TLB entry in parallel, don't
+	 * execute from the address if the execute permission is not set
+	 */
+	pr = vcpu->arch.shared->msr & MSR_PR;
+	if (unlikely((pr && !(mas3 & MAS3_UX)) ||
+		     (!pr && !(mas3 & MAS3_SX)))) {
+		pr_err_ratelimited(
+			"%s: Instuction emulation from guest addres %08lx without execute permission\n",
+			__func__, geaddr);
+		return EMULATE_AGAIN;
+	}
+
+	/*
+	 * The real address will be mapped by a cacheable, memory coherent,
+	 * write-back page. Check for mismatches when LRAT is used.
+	 */
+	if (has_feature(vcpu, VCPU_FTR_MMU_V2) &&
+	    unlikely((mas2 & MAS2_I) || (mas2 & MAS2_W) || !(mas2 & MAS2_M))) {
+		pr_err_ratelimited(
+			"%s: Instuction emulation from guest addres %08lx mismatches storage attributes\n",
+			__func__, geaddr);
+		return EMULATE_AGAIN;
+	}
+
+	/* Get pfn */
+	psize_shift = MAS1_GET_TSIZE(mas1) + 10;
+	addr = (mas7_mas3 & (~0ULL << psize_shift)) |
+	       (geaddr & ((1ULL << psize_shift) - 1ULL));
+	pfn = addr >> PAGE_SHIFT;
+
+	/* Guard against emulation from devices area */
+	if (unlikely(!page_is_ram(pfn))) {
+		pr_err_ratelimited("%s: Instruction emulation from non-RAM host addres %08llx is not supported\n",
+			 __func__, addr);
+		return EMULATE_AGAIN;
+	}
+
+	/* Map a page and get guest's instruction */
+	page = pfn_to_page(pfn);
+	eaddr = (unsigned long)kmap_atomic(page);
+	*instr = *(u32 *)(eaddr | (unsigned long)(addr & ~PAGE_MASK));
+	kunmap_atomic((u32 *)eaddr);
+
+	return EMULATE_DONE;
+}
+#else
 int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
 			  u32 *instr)
 {
 	return EMULATE_AGAIN;
 }
+#endif
 
 /************* MMU Notifiers *************/
 
-- 
1.7.11.7



More information about the Linuxppc-dev mailing list