[PATCH 6/9] powerpc: Remove oprofile RS64 support
Michael Ellerman
mpe at ellerman.id.au
Thu Jul 10 12:29:23 EST 2014
We no longer support these cpus, so we don't need oprofile support for
them either.
Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
---
arch/powerpc/include/asm/oprofile_impl.h | 1 -
arch/powerpc/oprofile/Makefile | 2 +-
arch/powerpc/oprofile/common.c | 3 -
arch/powerpc/oprofile/op_model_rs64.c | 222 -------------------------------
4 files changed, 1 insertion(+), 227 deletions(-)
delete mode 100644 arch/powerpc/oprofile/op_model_rs64.c
diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
index d697b08994c9..61fe5d6f18e1 100644
--- a/arch/powerpc/include/asm/oprofile_impl.h
+++ b/arch/powerpc/include/asm/oprofile_impl.h
@@ -61,7 +61,6 @@ struct op_powerpc_model {
};
extern struct op_powerpc_model op_model_fsl_emb;
-extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
extern struct op_powerpc_model op_model_7450;
extern struct op_powerpc_model op_model_cell;
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
index 751ec7bd5018..cedbbeced632 100644
--- a/arch/powerpc/oprofile/Makefile
+++ b/arch/powerpc/oprofile/Makefile
@@ -14,6 +14,6 @@ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \
cell/spu_profiler.o cell/vma_map.o \
cell/spu_task_sync.o
-oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
+oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_power4.o op_model_pa6t.o
oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
oprofile-$(CONFIG_6xx) += op_model_7450.o
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index c77348c5d463..bf094c5a4bd9 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -205,9 +205,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ops->sync_stop = model->sync_stop;
break;
#endif
- case PPC_OPROFILE_RS64:
- model = &op_model_rs64;
- break;
case PPC_OPROFILE_POWER4:
model = &op_model_power4;
break;
diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c
deleted file mode 100644
index 7e5b8ed3a1b7..000000000000
--- a/arch/powerpc/oprofile/op_model_rs64.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-#define dbg(args...)
-
-static void ctrl_write(unsigned int i, unsigned int val)
-{
- unsigned int tmp = 0;
- unsigned long shift = 0, mask = 0;
-
- dbg("ctrl_write %d %x\n", i, val);
-
- switch(i) {
- case 0:
- tmp = mfspr(SPRN_MMCR0);
- shift = 6;
- mask = 0x7F;
- break;
- case 1:
- tmp = mfspr(SPRN_MMCR0);
- shift = 0;
- mask = 0x3F;
- break;
- case 2:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 4;
- mask = 0x1F;
- break;
- case 3:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 9;
- mask = 0x1F;
- break;
- case 4:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 14;
- mask = 0x1F;
- break;
- case 5:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 19;
- mask = 0x1F;
- break;
- case 6:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 24;
- mask = 0x1F;
- break;
- case 7:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 28;
- mask = 0xF;
- break;
- }
-
- tmp = tmp & ~(mask << shift);
- tmp |= val << shift;
-
- switch(i) {
- case 0:
- case 1:
- mtspr(SPRN_MMCR0, tmp);
- break;
- default:
- mtspr(SPRN_MMCR1, tmp);
- }
-
- dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0),
- mfspr(SPRN_MMCR1));
-}
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int num_counters;
-
-static int rs64_reg_setup(struct op_counter_config *ctr,
- struct op_system_config *sys,
- int num_ctrs)
-{
- int i;
-
- num_counters = num_ctrs;
-
- for (i = 0; i < num_counters; ++i)
- reset_value[i] = 0x80000000UL - ctr[i].count;
-
- /* XXX setup user and kernel profiling */
- return 0;
-}
-
-static int rs64_cpu_setup(struct op_counter_config *ctr)
-{
- unsigned int mmcr0;
-
- /* reset MMCR0 and set the freeze bit */
- mmcr0 = MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- /* reset MMCR1, MMCRA */
- mtspr(SPRN_MMCR1, 0);
-
- if (cpu_has_feature(CPU_FTR_MMCRA))
- mtspr(SPRN_MMCRA, 0);
-
- mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
- /* Only applies to POWER3, but should be safe on RS64 */
- mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
- mtspr(SPRN_MMCR0, mmcr0);
-
- dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
- mfspr(SPRN_MMCR0));
- dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
- mfspr(SPRN_MMCR1));
-
- return 0;
-}
-
-static int rs64_start(struct op_counter_config *ctr)
-{
- int i;
- unsigned int mmcr0;
-
- /* set the PMM bit (see comment below) */
- mtmsrd(mfmsr() | MSR_PMM);
-
- for (i = 0; i < num_counters; ++i) {
- if (ctr[i].enabled) {
- classic_ctr_write(i, reset_value[i]);
- ctrl_write(i, ctr[i].event);
- } else {
- classic_ctr_write(i, 0);
- }
- }
-
- mmcr0 = mfspr(SPRN_MMCR0);
-
- /*
- * now clear the freeze bit, counting will not start until we
- * rfid from this excetion, because only at that point will
- * the PMM bit be cleared
- */
- mmcr0 &= ~MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
- return 0;
-}
-
-static void rs64_stop(void)
-{
- unsigned int mmcr0;
-
- /* freeze counters */
- mmcr0 = mfspr(SPRN_MMCR0);
- mmcr0 |= MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-
- mb();
-}
-
-static void rs64_handle_interrupt(struct pt_regs *regs,
- struct op_counter_config *ctr)
-{
- unsigned int mmcr0;
- int is_kernel;
- int val;
- int i;
- unsigned long pc = mfspr(SPRN_SIAR);
-
- is_kernel = is_kernel_addr(pc);
-
- /* set the PMM bit (see comment below) */
- mtmsrd(mfmsr() | MSR_PMM);
-
- for (i = 0; i < num_counters; ++i) {
- val = classic_ctr_read(i);
- if (val < 0) {
- if (ctr[i].enabled) {
- oprofile_add_ext_sample(pc, regs, i, is_kernel);
- classic_ctr_write(i, reset_value[i]);
- } else {
- classic_ctr_write(i, 0);
- }
- }
- }
-
- mmcr0 = mfspr(SPRN_MMCR0);
-
- /* reset the perfmon trigger */
- mmcr0 |= MMCR0_PMXE;
-
- /*
- * now clear the freeze bit, counting will not start until we
- * rfid from this exception, because only at that point will
- * the PMM bit be cleared
- */
- mmcr0 &= ~MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-}
-
-struct op_powerpc_model op_model_rs64 = {
- .reg_setup = rs64_reg_setup,
- .cpu_setup = rs64_cpu_setup,
- .start = rs64_start,
- .stop = rs64_stop,
- .handle_interrupt = rs64_handle_interrupt,
-};
--
1.9.1
More information about the Linuxppc-dev
mailing list