[PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD

[Scott Wood]

On Tue, 2014-07-08 at 10:36 +0530, Priyanka Jain wrote:
> Some Freescale boards like T1040RDB have on board CPLD connected on
> the IFC bus. Add binding for this in board.txt file
> 
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> ---
> Changes for v2: Incorporated Scott's comments

Isn't this v3?

>  .../devicetree/bindings/powerpc/fsl/board.txt      |   16 ++++++++++++++++
>  1 files changed, 16 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> index 700dec4..67ef6a4 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> @@ -84,3 +84,19 @@ Example:
>  		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
>  		reg = <0x66>;
>  	};
> +
> +* Freescale on-board CPLD
> +
> +Some Freescale boards like T1040RDB have on board CPLD connected.

s/have on board/have an on board/

> +
> +Required properties:
> +- compatible: Should be a board-specific string like "fsl,<board>-cpld"
> +  Example:
> +	"fsl,T1040RDB-cpld", "fsl,T1042RDB-cpld", "fsl,T1042RDB_PI-cpld"
> +- reg: should describe CPLD registers
> +
> +Example:
> +	cpld at 3,0 {
> +		compatible = "fsl,T1040RDB-cpld";
> +		reg = <3 0 0x300>;
> +	};

Again, please keep the board name lowercase.

-Scott