September 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Sep 1 01:46:17 EST 2011
Ending: Fri Sep 30 22:18:44 EST 2011
Messages: 961

• [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH 4/6] DMA: PL330: Add device tree support   Rob Herring
• [PATCH 3/3] arm/dt: Tegra: Add support-bit to SDHCI nodes   Stephen Warren
• [PATCH v3 06/13] dt: add empty for_each_child_of_node, of_find_property   Stephen Warren
• [PATCH 0/3] netdev/of/phy: MDIO bus multiplexer support.   David Daney
• [PATCH 1/3] netdev/of/phy: New function: of_mdio_find_bus().   David Daney
• [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   David Daney
• [PATCH 3/3] netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.   David Daney
• [PATCH 06/24] C6X: devicetree   Mark Salter
• [PATCH 0/2] i2c/of: Populate multiplexed i2c busses from the device tree.   David Daney
• [PATCH 1/2] i2c: Add a struct device * parameter to i2c_add_mux_adapter()   David Daney
• [PATCH 2/2] i2c/of: Automatically populate i2c mux busses from device tree data.   David Daney
• [PATCHv2 2/3] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Barry Song
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Barry Song
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Jamie Iles
• [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v2 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v2 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH v2 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH v2 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v2 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v2 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH v3 10/13] of: add a generic pinmux helper   Linus Walleij
• [PATCH v2 4/6] DMA: PL330: Add device tree support   Rob Herring
• [PATCH] gpio: exynos4: Add device tree support   Thomas Abraham
• [PATCH 00/13] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH 01/13] irq: Add stub for none DT build in irqdomain.h   Benoit Cousson
• [PATCH 02/13] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH 03/13] documentation/dt: Add OMAP i2c bindings documentation   Benoit Cousson
• [PATCH 04/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH 05/13] documentation/dt: Add TWL4030 and TWL6030 bindings   Benoit Cousson
• [PATCH 06/13] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH 07/13] arm/dts: omap4-sdp: Set clock freq for i2c controllers   Benoit Cousson
• [PATCH 08/13] arm/dts: omap4-panda: Set clock freq for i2c controllers   Benoit Cousson
• [PATCH 09/13] arm/dts: omap4-sdp: Add twl6030 node   Benoit Cousson
• [PATCH 10/13] arm/dts: omap4-panda: Add twl6030 node   Benoit Cousson
• [PATCH 11/13] OMAP4: board-dt: Remove static i2c init   Benoit Cousson
• [PATCH 12/13] arm/dts: omap4-sdp: Add i2c3 & i2c4 devices   Benoit Cousson
• [PATCH 13/13] arm/dts: omap4-panda: Add EEPROM entry in i2c3   Benoit Cousson
• [PATCH 0/7] OMAP3: Add basic DT support + i2c + twl   Benoit Cousson
• [PATCH 1/7] arm/dts: Add initial device-tree support for OMAP3 SoC   Benoit Cousson
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Benoit Cousson
• [PATCH 3/7] arm/dts: OMAP3: Add i2c controllers nodes   Benoit Cousson
• [PATCH 4/7] arm/dts: omap3-beagle: Include the generic omap3.dtsi   Benoit Cousson
• [PATCH 5/7] arm/dts: omap3-beagle: Add twl4030 and EEPROM i2c devices   Benoit Cousson
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Benoit Cousson
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Benoit Cousson
• [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller   Cousson, Benoit
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Arnd Bergmann
• [PATCH 04/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Arnd Bergmann
• [PATCH 00/13] OMAP4: Add DT support for i2c and twl6030   Arnd Bergmann
• [PATCH 4/4] powerpc/85xx: Adding DCSR node to dtsi device trees   Kumar Gala
• [PATCH 1/2] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/2] power: bq20z75: Add Device Tree Binding   Rhyland Klein
• [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller   G, Manjunath Kondaiah
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Tony Lindgren
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Russell King - ARM Linux
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Russell King - ARM Linux
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Tony Lindgren
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Cousson, Benoit
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Tony Lindgren
• [PATCH v2 RESEND] gpio-vx855: add device tree binding   Daniel Drake
• [PATCH v2] powerpc/85xx: Adding DCSR node to dtsi device trees   Kumar Gala
• [PATCH] ahci: add DT binding for Calxeda AHCI controller   Rob Herring
• [PATCH 2/9] Add dtget utility to read property values from device tree   Simon Glass
• [PATCH v2] dtc: Add support for named integer constants   Stephen Warren
• [PATCH] arm: exynos4: add support for dt irq specifier to linux virq conversion   Thomas Abraham
• [RFC PATCH 0/3] Yet another GIC OF binding series   Thomas Abraham
• [PATCH 2/9] Add dtget utility to read property values from device tree   David Gibson
• [PATCH] rtc: rtc-s3c: Add device tree support   Thomas Abraham
• [PATCH 2/9] Add dtget utility to read property values from device tree   Simon Glass
• [PATCH 6/9] Add new dtput utility to write values to fdt   Simon Glass
• [PATCH 2/9] Add dtget utility to read property values from device tree   David Gibson
• [PATCH 2/9] Add dtget utility to read property values from device tree   Simon Glass
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Kukjin Kim
• [PATCH 0/6] Add device tree support for PL330 dma controller driver   Kukjin Kim
• [PATCH v2 1/3] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Uwe Kleine-König
• [PATCH v2 2/3] dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name   Uwe Kleine-König
• [PATCH v2 3/3] dmaengine: imx-sdma: add device tree probe support   Uwe Kleine-König
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   G, Manjunath Kondaiah
• [PATCH 0/6] Add device tree support for PL330 dma controller driver   Vinod Koul
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Cousson, Benoit
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Tony Lindgren
• [PATCH 04/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Cousson, Benoit
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Arnd Bergmann
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Mitch Bradley
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• Arm device tree wonder   Pierre Beaumon
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Cousson, Benoit
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Linus Walleij
• Appended devicetree with Torvalds' HEAD   Shawn Guo
• [PATCH 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• Appended devicetree with Torvalds' HEAD   Nicolas Pitre
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• [PATCH REPOST 0/3] i2c: tegra: Outstanding patches   Ben Dooks
• Appended devicetree with Torvalds' HEAD   David Brown
• [PATCH] powerpc/fsl_msi: Handle msi-available-ranges better   Tabi Timur-B04825
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Dmitry Torokhov
• [PATCH v2 0/6] Add fdtget and fdtput for access to fdt from build system   Simon Glass
• [PATCH v2 1/6] Add utilfdt for common functions   Simon Glass
• [PATCH v2 2/6] ftdump: use util_read_fdt   Simon Glass
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   Simon Glass
• [PATCH v2 4/6] fdtget: Add basic tests   Simon Glass
• [PATCH v2 5/6] Add new fdtput utility to write values to fdt   Simon Glass
• [PATCH v2 6/6] fdtput: Add basic tests   Simon Glass
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Dmitry Torokhov
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Dmitry Torokhov
• [PATCH v2 0/3] Support character literals   Anton Staaf
• [PATCH v2 1/3] dtc: Refactor character literal parsing code   Anton Staaf
• [PATCH v2 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [PATCH v2 0/3] Support character literals   David Gibson
• [PATCH v2 1/3] dtc: Refactor character literal parsing code   David Gibson
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH v2 2/3] dtc: Support character literals in cell lists   David Gibson
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   David Gibson
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH v2 0/3] Support character literals   David Gibson
• [PATCH v2 1/6] Add utilfdt for common functions   David Gibson
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   David Gibson
• [PATCH v2 4/6] fdtget: Add basic tests   David Gibson
• [PATCH v2 5/6] Add new fdtput utility to write values to fdt   David Gibson
• [PATCH v2 6/6] fdtput: Add basic tests   David Gibson
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Grant Likely
• [PATCH REPOST v2 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH REPOST 1/2] i2c-imx: remove init/exit hooks from platform data   Shawn Guo
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Shawn Guo
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Cousson, Benoit
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Cousson, Benoit
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH] i2c: Add Device Tree support to versatile-i2c driver   Pawel Moll
• [PATCH v2] i2c: Add Device Tree support to versatile-i2c driver   Pawel Moll
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• [PATCH] ARM: supply a DTB file to be appended   Linus Walleij
• [PATCH v2 1/6] Add utilfdt for common functions   Simon Glass
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   Simon Glass
• [PATCH v2 5/6] Add new fdtput utility to write values to fdt   Simon Glass
• [PATCH v2 6/6] fdtput: Add basic tests   Simon Glass
• [PATCH v2 5/6] Add new fdtput utility to write values to fdt   David Gibson
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   David Gibson
• [PATCH v2] dtc: Add support for named integer constants   Simon Glass
• [PATCH v2] dtc: Add support for named integer constants   Simon Glass
• UEFI port of Fdtlib   Olivier Martin
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [PATCH v3] net/smsc911x: add device tree probe support   Dave Martin
• diff-ing two device tree   Kumar Gala
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Cousson, Benoit
• [PATCH v2 0/3] Support character literals   Anton Staaf
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [PATCH v2 1/3] dtc: Refactor character literal parsing code   Anton Staaf
• [PATCH] ARM: supply a DTB file to be appended   Grant Likely
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Dmitry Torokhov
• Appended devicetree with Torvalds' HEAD   Nicolas Pitre
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH] ARM: supply a DTB file to be appended   Nicolas Pitre
• diff-ing two device tree   Simon Glass
• [RFC PATCH 01/10] OMAP2+: l3-noc: Add support for device-tree   Grant Likely
• [RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Grant Likely
• [RFC PATCH 03/10] documentation/dt: Add l3-noc bindings   Grant Likely
• [RFC PATCH 04/10] arm/dts: OMAP4: Add mpu, dsp and iva nodes   Grant Likely
• [RFC PATCH 05/10] documentation/dt: Add mpu, dsp and iva bindings   Grant Likely
• [RFC PATCH 07/10] documentation/dt: Add spinlock bindings   Grant Likely
• [RFC PATCH 08/10] gpio/omap: Adapt GPIO driver to DT   Grant Likely
• [RFC PATCH 09/10] arm/dts: OMAP4: Add gpio nodes   Grant Likely
• [RFC PATCH 10/10] documentation/dt: Add OMAP GPIO properties   Grant Likely
• diff-ing two device tree   Grant Likely
• [PATCH v3] net/smsc911x: add device tree probe support   Grant Likely
• [PATCH v2] dtc: Add support for named integer constants   Grant Likely
• [PATCH v2] dtc: Add support for named integer constants   Simon Glass
• [PATCH v2 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH v3 0/3] Support character literals   Anton Staaf
• [PATCH v3 1/3] dtc: Refactor character literal parsing code   Anton Staaf
• [PATCH v3 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH v3 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• [PATCH] ARM: supply a DTB file to be appended   Linus Walleij
• [RFC PATCH 01/10] OMAP2+: l3-noc: Add support for device-tree   Cousson, Benoit
• [RFC PATCH 01/10] OMAP2+: l3-noc: Add support for device-tree   Grant Likely
• [RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Cousson, Benoit
• [RFC PATCH 03/10] documentation/dt: Add l3-noc bindings   Cousson, Benoit
• [RFC PATCH 05/10] documentation/dt: Add mpu, dsp and iva bindings   Cousson, Benoit
• [RFC PATCH 07/10] documentation/dt: Add spinlock bindings   Cousson, Benoit
• diff-ing two device tree   David Gibson
• [PATCH v2 2/3] dtc: Support character literals in cell lists   David Gibson
• [PATCH v2 0/3] Support character literals   David Gibson
• [PATCH v3 1/3] dtc: Refactor character literal parsing code   David Gibson
• [PATCH v3 2/3] dtc: Support character literals in cell lists   David Gibson
• [PATCH v3 3/3] dtc: Support character literals in bytestrings   David Gibson
• [PATCH v2] dtc: Add support for named integer constants   David Gibson
• [PATCH v2] dtc: Add support for named integer constants   David Gibson
• [RFC PATCH 08/10] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [RFC PATCH 10/10] documentation/dt: Add OMAP GPIO properties   Cousson, Benoit
• [PATCH v2 1/6] Add utilfdt for common functions   David Gibson
• [RFC PATCH 05/10] documentation/dt: Add mpu, dsp and iva bindings   Grant Likely
• [RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Grant Likely
• [PATCH v2] dtc: Add support for named integer constants   Simon Glass
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   David Gibson
• [PATCH] ARM: supply a DTB file to be appended   Rob Herring
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Rob Herring
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   Simon Glass
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [PATCH v3 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [PATCH v3 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH v3 3/3] dtc: Support character literals in bytestrings   David Gibson
• [PATCH v3 2/3] dtc: Support character literals in cell lists   David Gibson
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Uwe Kleine-König
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   David Gibson
• [PATCH] arm/dt: Add SoC detection macros   Allen Martin
• [PATCH v3] net/smsc911x: add device tree probe support   Dave Martin
• ASoC audio fabric OF bindings RFC. was: Re: [alsa-devel] ASoC MPC5xxx PSC AC97 audio driver   David Jander
• UEFI port of Fdtlib   Olivier Martin
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Shawn Guo
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Lothar Waßmann
• [PATCH v3] net/smsc911x: add device tree probe support   Shawn Guo
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [PATCH v3] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Jon Loeliger
• [PATCH v3 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH v3 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   Mark Brown
• [PATCH] arm/dt: Add SoC detection macros   Olof Johansson
• [PATCH] Input: gpio_keys - Use of_property_read_u32   Dmitry Torokhov
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• UEFI port of Fdtlib   Olivier Martin
• [PATCH v4 0/3] Support character literals   Anton Staaf
• [PATCH v4 1/3] dtc: Refactor character literal parsing code   Anton Staaf
• [PATCH v4 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH v4 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [PATCH v4 1/3] dtc: Refactor character literal parsing code   Jon Loeliger
• [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Andy Fleming
• [PATCH 1/2 v2] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/2 v2] power: bq20z75: Add Device Tree Binding   Rhyland Klein
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH v4 2/3] dtc: Support character literals in cell lists   David Gibson
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   David Gibson
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   David Gibson
• dtc: Remove gcc 4.6 "set but not used" warnings   David Gibson
• UEFI port of Fdtlib   David Gibson
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   Simon Glass
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   David Jander
• UEFI port of Fdtlib   Olivier Martin
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   Mark Brown
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   David Jander
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   Mark Brown
• Appended devicetree with Torvalds' HEAD   Nicolas Pitre
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   David Jander
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   Mark Brown
• Appended devicetree with Torvalds' HEAD   Nicolas Pitre
• [PATCH v2 3/3] dtc: Support character literals in bytestrings   Anton Staaf
• [PATCH v3 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v3 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH v3 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH v3 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v3 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH v3 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH v3 1/6] DMA: PL330: move filter function into driver   Jassi Brar
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Jassi Brar
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   Grant Likely
• [PATCH v3 0/7] Add fdtget and fdtput for access to fdt from build system   y at google.com
• [PATCH v3 0/7] Add fdtget and fdtput for access to fdt from build system   Simon Glass
• [PATCH v3 1/7] Create Makefile.utils and move ftdump into it   Simon Glass
• [PATCH v3 2/7] Add utilfdt for common functions   Simon Glass
• [PATCH v3 3/7] Add utilfdt tests   Simon Glass
• [PATCH v3 4/7] Make testutils use utilfdt   Simon Glass
• [PATCH v3 5/7] ftdump: use utilfdt to read blob   Simon Glass
• [PATCH v3 6/7] Add fdtget utility to read property values from a device tree   Simon Glass
• [PATCH v3 7/7] Add fdtput utility to write property values to a device tree   Simon Glass
• [PATCH 06/24] C6X: devicetree   Grant Likely
• [PATCH 2/2 v2] power: bq20z75: Add Device Tree Binding   Grant Likely
• [PATCH 1/2 v2] power: bq20z75: devicetree init support   Grant Likely
• [PATCH 06/24] C6X: devicetree   Mark Salter
• [PATCH v3 0/2] Add device tree support for Samsung's I2C driver   Thomas Abraham
• [PATCH v3 1/2] i2c: s3c2410: Keep a copy of platform data and use it   Thomas Abraham
• [PATCH v3 2/2] i2c: s3c2410: Add device tree support   Thomas Abraham
• [alsa-devel] ASoC audio fabric OF bindings RFC. was: Re: ASoC MPC5xxx PSC AC97 audio driver   David Jander
• [PATCH 06/24] C6X: devicetree   Arnd Bergmann
• [PATCH v3 1/2] i2c: s3c2410: Keep a copy of platform data and use it   Stephen Boyd
• [PATCH] net/smsc911x: Correctly configure 16-bit register access from DT   Dave Martin
• [PATCH v2 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH 06/24] C6X: devicetree   Mark Salter
• [PATCH 06/24] C6X: devicetree   Arnd Bergmann
• [PATCH 06/24] C6X: devicetree   Grant Likely
• [PATCH] powerpc/fsl_msi: Handle msi-available-ranges better   Scott Wood
• Appended devicetree with Torvalds' HEAD   David Brown
• [PATCH 06/24] C6X: devicetree   Arnd Bergmann
• [PATCH 1/2 v3] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/2 v3] power: bq20z75: Add Device Tree Binding   Rhyland Klein
• [PATCH 06/24] C6X: devicetree   Mark Salter
• [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Kumar Gala
• [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   David Daney
• [PATCH] MAINTAINERS: update devicetree maintainers   Rob Herring
• [PATCH 0/2] isp1760: Allow device-tree-based probing on non-powerpc architectures   Dave Martin
• [PATCH 1/2] isp1760: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH 2/2] isp1760: Fix endianness-sensitivity in of_isp1760_probe()   Dave Martin
• [PATCH 1/2] isp1760: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH 1/2] isp1760: Make probing via device tree non-powerpc-specific   Grant Likely
• [PATCH 2/2] isp1760: Fix endianness-sensitivity in of_isp1760_probe()   Grant Likely
• [PATCH] MAINTAINERS: update devicetree maintainers   Grant Likely
• [PATCH 1/2 v3] power: bq20z75: devicetree init support   Grant Likely
• [PATCH 2/2 v3] power: bq20z75: Add Device Tree Binding   Grant Likely
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH] net/smsc911x: Correctly configure 16-bit register access from DT   Grant Likely
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Grant Likely
• [PATCH v3 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Grant Likely
• [PATCH 0/5] GIC OF bindings   Rob Herring
• [PATCH 1/5] irq: add declaration of irq_domain_simple_ops to irqdomain.h   Rob Herring
• [PATCH 2/5] irq: fix existing domain check in irq_domain_add   Rob Herring
• [PATCH 3/5] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 4/5] ARM: gic: allow irq_start to be 0   Rob Herring
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 2/5] irq: fix existing domain check in irq_domain_add   Thomas Gleixner
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Marc Zyngier
• [PATCH v3 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH v4] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Marc Zyngier
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH 2/2] isp1760: Fix endianness-sensitivity in of_isp1760_probe()   Sergei Shtylyov
• [PATCH v4] power: bq20z75: devicetree init support   Grant Likely
• [PATCHv4] gpio-generic: add support for device tree probing   Jamie Iles
• [PATCHv3] dt: add helper to read 64-bit integers   Jamie Iles
• [PATCH v5] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Kumar Gala
• [PATCH v3 0/2] Add device tree support for Samsung's I2C driver   Ben Dooks
• [PATCH v2] i2c: Add Device Tree support to versatile-i2c driver   Ben Dooks
• Device tree property names for MDIO bus multiplexer. Was: Re: [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   David Daney
• [PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Timur Tabi
• Device tree property names for MDIO bus multiplexer. Was: Re: [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Grant Likely
• [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Grant Likely
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH v3 0/2] Add device tree support for Samsung's I2C driver   Thomas Abraham
• [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   David Daney
• [PATCH 5/5] ARM: gic: add OF based initialization   Thomas Abraham
• [PATCHv2 0/3] Initial support for Picochip picoxcell   Jamie Iles
• [PATCH 0/5] GIC OF bindings   Jamie Iles
• [PATCH 2/2] isp1760: Fix endianness-sensitivity in of_isp1760_probe()   Dave Martin
• [PATCH v2] i2c: Add Device Tree support to versatile-i2c driver   Pawel Moll
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH 3/5] of/irq: introduce of_irq_init   Arnd Bergmann
• [PATCH 5/5] ARM: gic: add OF based initialization   Arnd Bergmann
• [RFC PATCH 00/11] Device tree support for regulators   Rajendra Nayak
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Rajendra Nayak
• [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply   Rajendra Nayak
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rajendra Nayak
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Rajendra Nayak
• [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Rajendra Nayak
• [RFC PATCH 07/11] regulator: Make fixed regulator driver extract data from DT   Rajendra Nayak
• [RFC PATCH 08/11] omap4: panda: Pass fixed regulator data from DT   Rajendra Nayak
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Rajendra Nayak
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Rajendra Nayak
• [RFC PATCH 11/11] DT: regulator: register regulators as platform devices   Rajendra Nayak
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Benjamin Herrenschmidt
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Jamie Iles
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Mark Brown
• [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply   Mark Brown
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Mark Brown
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Mark Brown
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Mark Brown
• [RFC PATCH 07/11] regulator: Make fixed regulator driver extract data from DT   Mark Brown
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 0/5] GIC OF bindings   Shawn Guo
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Mark Brown
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Mark Brown
• [RFC PATCH 11/11] DT: regulator: register regulators as platform devices   Mark Brown
• [PATCH v3 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH v3 1/2] i2c-imx: remove init/exit hooks from platform data   Shawn Guo
• [PATCH v3 2/2] i2c-imx: add device tree probe support   Shawn Guo
• [PATCH v3 0/2] Add device tree probe for i2c-imx driver   Ben Dooks
• [PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Kumar Gala
• [PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Timur Tabi
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Gala Kumar-B11780
• [PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Timur Tabi
• [PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Kumar Gala
• [PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Timur Tabi
• [PATCH] [v3] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards   Timur Tabi
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rob Herring
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rob Herring
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Grant Likely
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Grant Likely
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Grant Likely
• [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT   Grant Likely
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Grant Likely
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Grant Likely
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Mark Brown
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Rajendra Nayak
• [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply   Rajendra Nayak
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rajendra Nayak
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Rajendra Nayak
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Rajendra Nayak
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Rajendra Nayak
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Rajendra Nayak
• [RFC PATCH 11/11] DT: regulator: register regulators as platform devices   Rajendra Nayak
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rajendra Nayak
• [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   David Gibson
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Mark Brown
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Mark Brown
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Mark Brown
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Mark Brown
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Mark Brown
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Rajendra Nayak
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Rajendra Nayak
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Rajendra Nayak
• [PATCH 5/5] ARM: gic: add OF based initialization   Thomas Abraham
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Mark Brown
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH 5/5] ARM: gic: add OF based initialization   Dave Martin
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   Simon Glass
• [PATCH v2 RESEND 2] gpio-vx855: add device tree binding   Daniel Drake
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Rob Herring
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Russell King - ARM Linux
• [PATCH] arm/dt: Add SoC detection macros   Russell King - ARM Linux
• [PATCH] arm/dt: Add SoC detection macros   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm/dt: Add SoC detection macros   Russell King - ARM Linux
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Grant Likely
• [PATCH v2 RESEND 2] gpio-vx855: add device tree binding   Grant Likely
• dtc: Remove gcc 4.6 "set but not used" warnings   Jon Loeliger
• [PATCH v4 2/3] dtc: Support character literals in cell lists   Jon Loeliger
• [PATCH v4] power: bq20z75: devicetree init support   Grant Likely
• [PATCH] arm/dt: Add SoC detection macros   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Arnd Bergmann
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Arnd Bergmann
• [PATCH] arm/dt: Add SoC detection macros   Arnd Bergmann
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Grant Likely
• [PATCH 2/5] irq: fix existing domain check in irq_domain_add   Grant Likely
• [PATCH 3/5] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH] arm/dt: Add SoC detection macros   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 3/5] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 4/5] ARM: gic: allow irq_start to be 0   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH] arm/dt: Add SoC detection macros   Arnd Bergmann
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• [PATCH] MAINTAINERS: update devicetree maintainers   Linus Walleij
• [PATCH 4/5] ARM: gic: allow irq_start to be 0   Russell King - ARM Linux
• Appended devicetree with Torvalds' HEAD   David Brown
• Appended devicetree with Torvalds' HEAD   Nicolas Pitre
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH v4 2/3] dtc: Support character literals in cell lists   David Gibson
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   David Gibson
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   Simon Glass
• [PATCH v4 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• Appended devicetree with Torvalds' HEAD   Linus Walleij
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   David Gibson
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH] ARM: supply a DTB file to be appended   Linus Walleij
• [PATCH v2 RESEND 2] gpio-vx855: add device tree binding   Daniel Drake
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH v3 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH v3 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH v3 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Pawel Moll
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Kukjin Kim
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH 5/5] ARM: gic: add OF based initialization   Dave Martin
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 5/5] ARM: gic: add OF based initialization   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• Appended devicetree with Torvalds' HEAD   Nicolas Pitre
• [PATCH v2 3/6] Add fdtget utility to read property values from device tree   Simon Glass
• [PATCH v2] dt: add of_alias_scan and of_alias_get_id   Shawn Guo
• [PATCH] ARM: supply a DTB file to be appended   Nicolas Pitre
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH v4 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH] arm/dt: Add SoC detection macros   Allen Martin
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH] arm/dt: Add SoC detection macros   Olof Johansson
• [RESEND PATCH v3 0/7] Add fdtget and fdtput for access to fdt from build system   Simon Glass
• [RESEND PATCH v3 1/7] Create Makefile.utils and move ftdump into it   Simon Glass
• [RESEND PATCH v3 2/7] Add utilfdt for common functions   Simon Glass
• [RESEND PATCH v3 3/7] Add utilfdt tests   Simon Glass
• [RESEND PATCH v3 4/7] Make testutils use utilfdt   Simon Glass
• [RESEND PATCH v3 5/7] ftdump: use utilfdt to read blob   Simon Glass
• [RESEND PATCH v3 6/7] Add fdtget utility to read property values from a device tree   Simon Glass
• [RESEND PATCH v3 7/7] Add fdtput utility to write property values to a device tree   Simon Glass
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH v2] dtc: Add support for named integer constants   Stephen Warren
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH v4 2/3] dtc: Support character literals in cell lists   David Gibson
• [RESEND PATCH v3 1/7] Create Makefile.utils and move ftdump into it   David Gibson
• [RESEND PATCH v3 2/7] Add utilfdt for common functions   David Gibson
• [RESEND PATCH v3 3/7] Add utilfdt tests   David Gibson
• [PATCH v4 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH v4 2/3] dtc: Support character literals in cell lists   David Gibson
• [RESEND PATCH v3 2/7] Add utilfdt for common functions   Simon Glass
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• Subnodes of vendor-added nodes   David VomLehn
• [PATCH v2] of: Change logic to overwrite cmd_line with CONFIG_CMDLINE   Benjamin Herrenschmidt
• Subnodes of vendor-added nodes   Grant Likely
• [PATCH v2] of: Change logic to overwrite cmd_line with CONFIG_CMDLINE   Grant Likely
• Subnodes of vendor-added nodes   David Gibson
• Subnodes of vendor-added nodes   Grant Likely
• [PATCH v2] dtc: Add support for named integer constants   David Gibson
• [RESEND PATCH v3 2/7] Add utilfdt for common functions   David Gibson
• DT vs ARM static mappings   Pawel Moll
• DT vs ARM static mappings   Rob Herring
• [PATCH v2] dtc: Add support for named integer constants   Jon Loeliger
• DT vs ARM static mappings   Pawel Moll
• DT vs ARM static mappings   Rob Herring
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• DT vs ARM static mappings   Pawel Moll
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Stephen Warren
• [PATCH REPOST 2/2] arm/dt: Tegra: Add support-8bit to SDHCI nodes   Stephen Warren
• [PATCH v2] dtc: Add support for named integer constants   Stephen Warren
• [PATCH v2] dtc: Add support for named integer constants   Scott Wood
• [PATCH REPOST 2/2] arm/dt: Tegra: Add support-8bit to SDHCI nodes   Grant Likely
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Grant Likely
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• Passing an initrd to a Linux kernel with Device Tree   Olivier Martin
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Stephen Warren
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Chris Ball
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Grant Likely
• DT vs ARM static mappings   Arnd Bergmann
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Jeff Garzik
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• Passing an initrd to a Linux kernel with Device Tree   Grant Likely
• [PATCH 0/3] GIC OF bindings   Rob Herring
• [PATCH 1/3] of/irq: of_irq_find_parent: check for parent equal to child   Rob Herring
• [PATCH 2/3] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 1/3] of/irq: of_irq_find_parent: check for parent equal to child   Grant Likely
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Olof Johansson
• [PATCH 2/3] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 3/3] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 0/3] GIC OF bindings   David Miller
• [PATCH 0/3] GIC OF bindings   Grant Likely
• [PATCH 0/3] GIC OF bindings   Mitch Bradley
• [PATCH 0/3] GIC OF bindings   Segher Boessenkool
• [PATCH 0/3] GIC OF bindings   David Miller
• [PATCH 0/3] GIC OF bindings   Mitch Bradley
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• Passing an initrd to a Linux kernel with Device Tree   Dave P Martin
• DT vs ARM static mappings   Pawel Moll
• [PATCH 0/3] GIC OF bindings   Shawn Guo
• DT vs ARM static mappings   Dave Martin
• [PATCH 2/3] of/irq: introduce of_irq_init   Jamie Iles
• DT vs ARM static mappings   Pawel Moll
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH 2/3] mfd: link vx855 GPIO cell with device tree   Daniel Drake
• [PATCH 3/3] gpio-vx855: Add device tree binding   Daniel Drake
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Mark Brown
• [PATCH 3/3] gpio-vx855: Add device tree binding   Mark Brown
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH 3/3] gpio-vx855: Add device tree binding   Daniel Drake
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Mark Brown
• [PATCH] ARM: vexpress: initial device tree support   Rob Herring
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• Passing an initrd to a Linux kernel with Device Tree   Nicolas Pitre
• [PATCH] ARM: vexpress: initial device tree support   Pawel Moll
• Passing an initrd to a Linux kernel with Device Tree   Grant Likely
• [PATCH] ARM: vexpress: initial device tree support   Grant Likely
• [PATCH] devicetree: Add a registry of vendor prefixes   Grant Likely
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH] ARM: vexpress: initial device tree support   Pawel Moll
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH] ARM: vexpress: initial device tree support   Pawel Moll
• [PATCH 3/3] gpio-vx855: Add device tree binding   Grant Likely
• [PATCH 3/3] gpio-vx855: Add device tree binding   Mark Brown
• [PATCH] ARM: vexpress: initial device tree support   Rob Herring
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH 3/3] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH] ARM: vexpress: initial device tree support   Mitch Bradley
• DT vs ARM static mappings   Nicolas Pitre
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH] net/smsc911x: Correctly configure 16-bit register access from DT   David Miller
• [PATCH] dt: add empty for_each_child_of_node, of_find_property   Stephen Warren
• [PATCH 3/3] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH v4 2/3] dtc: Support character literals in cell lists   Anton Staaf
• [PATCH 3/3] ARM: gic: add OF based initialization   Cousson, Benoit
• [RESEND PATCH v3 3/7] Add utilfdt tests   Simon Glass
• [PATCH v4 0/6] Add fdtget and fdtput for access to fdt from build system   Simon Glass
• [PATCH v4 1/6] Create Makefile.utils and move ftdump into it   Simon Glass
• [PATCH v4 2/6] Add fdt read/write utility functions   Simon Glass
• [PATCH v4 3/6] Make testutils use utilfdt   Simon Glass
• [PATCH v4 4/6] ftdump: use utilfdt to read blob   Simon Glass
• [PATCH v4 5/6] Add fdtget utility to read property values from a device tree   Simon Glass
• [PATCH v4 6/6] Add fdtput utility to write property values to a device tree   Simon Glass
• [PATCH v2] dt: add of_alias_scan and of_alias_get_id   Grant Likely
• [PATCH] devicetree: Add a registry of vendor prefixes   David Brown
• [PATCH 0/3] Variable sized cell support   Anton Staaf
• [PATCH 1/3] libfdt: Add fdt16_to_cpu utility function   Anton Staaf
• [PATCH 2/3] dtc: Add data_append_literal function   Anton Staaf
• [PATCH 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCH] dt: add of_alias_scan and of_alias_get_id   Grant Likely
• [PATCH] devicetree: Add a registry of vendor prefixes   Grant Likely
• [PATCH] dt: add of_alias_scan and of_alias_get_id   David Miller
• [PATCH] devicetree: Add a registry of vendor prefixes   David Brown
• [PATCH] devicetree: Add a registry of vendor prefixes   Grant Likely
• [PATCH v4 2/3] dtc: Support character literals in cell lists   David Gibson
• [PATCH 1/3] libfdt: Add fdt16_to_cpu utility function   David Gibson
• [PATCH 0/3] Variable sized cell support   David Gibson
• [PATCH 2/3] dtc: Add data_append_literal function   David Gibson
• [PATCH 3/3] dtc: Add support for variable sized cells   David Gibson
• [PATCH v4 2/6] Add fdt read/write utility functions   David Gibson
• [PATCH v4 3/6] Make testutils use utilfdt   David Gibson
• [PATCH v4 4/6] ftdump: use utilfdt to read blob   David Gibson
• [PATCH] serial/imx: add of_alias_get_id() reference back   Shawn Guo
• [PATCH] dt: add of_alias_scan and of_alias_get_id   Shawn Guo
• [PATCH] devicetree: Add a registry of vendor prefixes   Nicolas Ferre
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• DT vs ARM static mappings   Pawel Moll
• DT vs ARM static mappings   Russell King - ARM Linux
• DT vs ARM static mappings   Pawel Moll
• DT vs ARM static mappings   Russell King - ARM Linux
• [PATCH v4 2/3] dtc: Support character literals in cell lists   Jon Loeliger
• [PATCH v4 2/3] dtc: Support character literals in cell lists   Jon Loeliger
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• [PATCH v4 1/6] Create Makefile.utils and move ftdump into it   Jon Loeliger
• [PATCH v4 2/6] Add fdt read/write utility functions   Jon Loeliger
• DT vs ARM static mappings   Pawel Moll
• [PATCH v4 2/6] Add fdt read/write utility functions   Simon Glass
• [PATCH] dt: add of_alias_scan and of_alias_get_id   Grant Likely
• [PATCH v5 0/5] Add fdtget and fdtput for access to fdt from build system   Simon Glass
• [PATCH v5 1/5] Add fdt read/write utility functions   Simon Glass
• [PATCH v5 2/5] Make testutils use utilfdt   Simon Glass
• [PATCH v5 3/5] ftdump: use utilfdt to read blob   Simon Glass
• [PATCH v5 4/5] Add fdtget utility to read property values from a device tree   Simon Glass
• [PATCH v5 5/5] Add fdtput utility to write property values to a device tree   Simon Glass
• [PATCH] serial/imx: add of_alias_get_id() reference back   Grant Likely
• [PATCH] dt: add empty for_each_child_of_node, of_find_property   Grant Likely
• [PATCH v3 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Grant Likely
• [PATCH v3 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH v2 RESEND 2] gpio-vx855: add device tree binding   Grant Likely
• [PATCH 0/3] Variable sized cell support   Anton Staaf
• [PATCH 2/3] dtc: Add data_append_literal function   Anton Staaf
• [PATCH 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCH v2 0/3] Variable sized cell support   Anton Staaf
• [PATCH v2 1/3] libfdt: Add fdt16_to_cpu utility function   Anton Staaf
• [PATCH v2 2/3] dtc: Add data_append_integer function   Anton Staaf
• [PATCH v2 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCH v5 1/5] Add fdt read/write utility functions   Jon Loeliger
• [PATCH v5 2/5] Make testutils use utilfdt   Jon Loeliger
• [PATCH v5 3/5] ftdump: use utilfdt to read blob   Jon Loeliger
• [PATCH v5 1/5] Add fdt read/write utility functions   Simon Glass
• [PATCH 0/4] arm/tegra: Convert gpio & pinmux to platform devices   Stephen Warren
• [PATCH 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Stephen Warren
• [PATCH 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi   Stephen Warren
• [PATCH 3/4] gpio/tegra: Convert to a platform device   Stephen Warren
• [PATCH 4/4] arm/tegra: Convert pinmux driver to a platform device   Stephen Warren
• [PATCH 2/3] dtc: Add data_append_literal function   David Gibson
• [PATCH 3/3] dtc: Add support for variable sized cells   David Gibson
• [PATCH v2 1/3] libfdt: Add fdt16_to_cpu utility function   David Gibson
• [PATCH v2 2/3] dtc: Add data_append_integer function   David Gibson
• [PATCH v5 4/5] Add fdtget utility to read property values from a device tree   David Gibson
• [PATCH v5 5/5] Add fdtput utility to write property values to a device tree   David Gibson
• [PATCH v3] of/irq: introduce of_irq_init   Rob Herring
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Barry Song
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Benjamin Herrenschmidt
• [PATCH v2 2/3] dtc: Add data_append_integer function   Anton Staaf
• [PATCH 2/3] dtc: Add data_append_literal function   Anton Staaf
• [PATCH v3] of/irq: introduce of_irq_init   Grant Likely
• DT vs ARM static mappings   Arnd Bergmann
• [PATCH 0/4] arm/tegra: Convert gpio & pinmux to platform devices   Arnd Bergmann
• [PATCH 2/3] dtc: Add data_append_literal function   Anton Staaf
• [PATCH v3 0/3] Variable sized cell support   Anton Staaf
• [PATCH v3 1/3] libfdt: Add fdt16_to_cpu utility function   Anton Staaf
• [PATCH v3 2/3] dtc: Add data_append_integer function   Anton Staaf
• [PATCH v3 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCH 00/11] OMAP: Add initial support for DT on OMAP3 & OMAP4   Benoit Cousson
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Benoit Cousson
• [PATCH 02/11] arm/dts: Add initial device tree support for OMAP4 SoC   Benoit Cousson
• [PATCH 03/11] arm/dts: Add support for OMAP4 PandaBoard   Benoit Cousson
• [PATCH 04/11] arm/dts: Add support for OMAP4 SDP board   Benoit Cousson
• [PATCH 05/11] arm/dts: Add initial device tree support for OMAP3 SoC   Benoit Cousson
• [PATCH 06/11] arm/dts: Add support for OMAP3 Beagle board   Benoit Cousson
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Benoit Cousson
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Benoit Cousson
• [PATCH 09/11] OMAP2+: l3-noc: Add support for device-tree   Benoit Cousson
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Benoit Cousson
• [PATCH 11/11] arm/dts: OMAP3+: Add mpu, dsp and iva nodes   Benoit Cousson
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Tony Lindgren
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Tony Lindgren
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Tony Lindgren
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Tony Lindgren
• [PATCH 03/11] arm/dts: Add support for OMAP4 PandaBoard   Grant Likely
• [PATCH 11/11] arm/dts: OMAP3+: Add mpu, dsp and iva nodes   Grant Likely
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Grant Likely
• [PATCH v3 1/3] libfdt: Add fdt16_to_cpu utility function   David Gibson
• [PATCH v3 2/3] dtc: Add data_append_integer function   David Gibson
• [PATCH v3 3/3] dtc: Add support for variable sized cells   David Gibson
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Rajendra Nayak
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Cousson, Benoit
• [PATCHv2 0/3] Initial support for Picochip picoxcell   Jamie Iles
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Cousson, Benoit
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Cousson, Benoit
• [PATCH 03/11] arm/dts: Add support for OMAP4 PandaBoard   Cousson, Benoit
• [PATCHv2 0/3] Initial support for Picochip picoxcell   Arnd Bergmann
• [PATCHv3 0/4] Initial support for Picochip picoXcell   Jamie Iles
• [PATCHv3 1/4] picoxcell: support for Picochip picoxcell devices   Jamie Iles
• [PATCHv3 2/4] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Jamie Iles
• [PATCHv3 3/4] picoxcell: add the DTS for the PC7302 board   Jamie Iles
• [PATCHv3 4/4] picoxcell: remove custom ioremap implementation   Jamie Iles
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Tony Lindgren
• [PATCH 00/13] OMAP3+: Add DT support for early devices and i2c / twl6030   Benoit Cousson
• [PATCH 01/13] hwspinlock: OMAP4: Add spinlock support in DT   Benoit Cousson
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Benoit Cousson
• [PATCH 03/13] arm/dts: OMAP4: Add gpio nodes   Benoit Cousson
• [PATCH 04/13] irq: Add stub for none DT build in irqdomain.h   Benoit Cousson
• [PATCH 05/13] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH 06/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH 07/13] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH 08/13] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH 09/13] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH 10/13] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH 11/13] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH 12/13] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH 13/13] OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [PATCH v3 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCHv3 2/4] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Rob Herring
• [PATCHv3 2/4] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Jamie Iles
• serial: samsung: add clkdev based clock lookup and device tree support   Thomas Abraham
• [PATCH 1/9] serial: samsung: Keep a copy of the location of platform data in driver's private data   Thomas Abraham
• [PATCH 2/9] serial: samsung: move handling of fclk/n clock to platform code   Thomas Abraham
• [PATCH 3/9] serial: samsung: switch to clkdev based clock lookup   Thomas Abraham
• [PATCH 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it   Thomas Abraham
• [PATCH 5/9] serial: samsung: remove all uses of get_clksrc and set_clksrc   Thomas Abraham
• [PATCH 6/9] arm: samsung: register uart clocks to clock lookup list   Thomas Abraham
• [PATCH 7/9] serial: samsung: merge all SoC specific port reset functions   Thomas Abraham
• [PATCH 8/9] serial: samsung: merge probe() function from all SoC specific extensions   Thomas Abraham
• [PATCH 9/9] serial: samsung: add device tree support   Thomas Abraham
• [PATCH v4] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• [PATCH v3 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Tony Lindgren
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Tony Lindgren
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Tony Lindgren
• [PATCH] ARM: OMAP2+: Use SoC specifc map_io   Tony Lindgren
• [PATCH] ARM: OMAP2+: Remove custom init_irq for remaining boards   Tony Lindgren
• [PATCH v3 3/3] dtc: Add support for variable sized cells   David Gibson
• [PATCH v3 3/3] dtc: Add support for variable sized cells   David Gibson
• [PATCH v4] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Rajendra Nayak
• [PATCH 06/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Rajendra Nayak
• [PATCH 08/13] arm/dts: OMAP4: Add i2c controller nodes   Rajendra Nayak
• [PATCH v3 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH v3 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 0/9] Device tree support for regulators   Rajendra Nayak
• [PATCH 1/9] regulator: twl: Remove hardcoded board constraints from driver   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 3/9] omap4: sdp: Pass regulator data from dt   Rajendra Nayak
• [PATCH 4/9] regulator: twl: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Rajendra Nayak
• [PATCH 6/9] regulator: make fixed regulator driver extract data from dt   Rajendra Nayak
• [PATCH 7/9] omap4: panda: Pass regulator data from DT   Rajendra Nayak
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH 1/9] regulator: twl: Remove hardcoded board constraints from driver   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 4/9] regulator: twl: Make twl-regulator driver extract data from DT   Mark Brown
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Mark Brown
• [PATCH 1/2] ARM: vic: device tree binding   Jamie Iles
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Mark Brown
• [PATCH v4] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Rob Herring
• [PATCH 1/2] ARM: vic: device tree binding   Rob Herring
• [PATCH 1/2] ARM: vic: device tree binding   Jamie Iles
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH 1/9] regulator: twl: Remove hardcoded board constraints from driver   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 4/9] regulator: twl: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Rajendra Nayak
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Grant Likely
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Mark Brown
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Mark Brown
• [PATCH v3 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH v3 3/3] dtc: Add support for variable sized cells   Anton Staaf
• [PATCH v4 0/3] Variable sized array element support   Anton Staaf
• [PATCH v4 1/3] libfdt: Add fdt16_to_cpu utility function   Anton Staaf
• [PATCH v4 2/3] dtc: Add data_append_integer function   Anton Staaf
• [PATCH v4 3/3] dtc: Add support for variable sized elements   Anton Staaf
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Mark Brown
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Mark Brown
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Mark Brown
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCH 1/2] ARM: vic: device tree binding   Grant Likely
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Grant Likely
• [PATCH v4] of/irq: introduce of_irq_init   Grant Likely
• [PATCH v2 0/2] i2c/of: Populate multiplexed i2c busses from the device tree.   David Daney
• [PATCH v2 1/2] i2c: Add a struct device * parameter to i2c_add_mux_adapter()   David Daney
• [PATCH v2 2/2] i2c/of: Automatically populate i2c mux busses from device tree data.   David Daney
• [PATCH v2 0/3] netdev/of/phy: MDIO bus multiplexer support.   David Daney
• [PATCH v2 1/3] netdev/of/phy: New function: of_mdio_find_bus().   David Daney
• [PATCH v2 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   David Daney
• [PATCH v2 3/3] netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.   David Daney
• [PATCH v2] dtc: Add support for named integer constants   David Gibson
• [PATCH 1/2] devicetree: Add ARM pl061 gpio controller binding doc   Rob Herring
• [PATCH 2/2] devicetree: Add ARM pl022 spi controller binding doc   Rob Herring
• [PATCH 0/4] arm/tegra: Convert gpio & pinmux to platform devices   Stephen Warren
• [PATCH] libfdt: Add support for appending the values to a existing property   Minghuan Lian
• [PATCH v4 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH v4 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH v4 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH v2 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Michał Mirosław
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Cousson, Benoit
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Cousson, Benoit
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH 06/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Cousson, Benoit
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Daniel Drake
• [PATCH 2/3] mfd: link vx855 with device tree   Daniel Drake
• [PATCH 3/3] gpio-vx855: Add device tree binding   Daniel Drake
• [PATCH v5 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v5 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH v5 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH v5 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v5 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v5 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH v5 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCHv2 00/10] VIC DT binding and MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 01/10] ARM: vic: device tree binding   Jamie Iles
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCHv2 03/10] ARM: ep93xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 04/10] ARM: netx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 05/10] ARM: nomadik: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 06/10] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 07/10] ARM: spear: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 09/10] ARM: versatile: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 10/10] ARM: samsung: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Linus Walleij
• [PATCHv2 05/10] ARM: nomadik: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCHv2 03/10] ARM: ep93xx: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCH 1/3] mfd: allow mfd_cell association with device tree node   Mark Brown
• [PATCH v3 07/24] C6X: devicetree support   Arnd Bergmann
• [PATCH v3 07/24] C6X: devicetree support   Mark Salter
• [PATCH v3 07/24] C6X: devicetree support   Arnd Bergmann
• [PATCH v2] dtc: Add support for named integer constants   Scott Wood
• [PATCH v2 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   David Daney
• [PATCH v2 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Michał Mirosław
• [PATCH v2 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   David Daney
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Scott Wood
• [PATCHv2 01/10] ARM: vic: device tree binding   Grant Likely
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Grant Likely
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Scott Wood
• [PATCH v3 07/24] C6X: devicetree support   Grant Likely
• [PATCH 0/2] GIC OF bindings   Rob Herring
• [PATCH 1/2] ARM: gic: add irq_domain support   Rob Herring
• [PATCH 2/2] ARM: gic: add OF based initialization   Rob Herring
• [PATCHv2 01/10] ARM: vic: device tree binding   Rob Herring
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Linus Walleij
• [PATCH 0/2] GIC OF bindings   Jamie Iles
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Zoltan Devai
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Grant Likely
• [PATCH 1/2] ARM: gic: add irq_domain support   Grant Likely
• [PATCH 2/2] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 12/13] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Grant Likely
• [PATCH v2 0/3] netdev/of/phy: MDIO bus multiplexer support.   David Miller
• [PATCH 1/2] ARM: gic: add irq_domain support   Rob Herring
• [PATCH v2 1/3] netdev/of/phy: New function: of_mdio_find_bus().   Grant Likely
• [PATCH v2 2/3] netdev/of/phy: Add MDIO bus multiplexer support.   Grant Likely
• [PATCH v2 3/3] netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.   Grant Likely
• [PATCH 1/2] ARM: gic: add irq_domain support   Grant Likely
• [PATCH v2 0/3] netdev/of/phy: MDIO bus multiplexer support.   Grant Likely
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Grant Likely
• [PATCH 2/2] tty: use of_match_ptr() for of_match_table entry   Grant Likely
• [PATCH 6/9] regulator: make fixed regulator driver extract data from dt   Grant Likely
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Grant Likely
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Grant Likely
• [PATCH 0/9] Device tree support for regulators   Grant Likely
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Cousson, Benoit
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Cousson, Benoit
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown

Last message date: Fri Sep 30 22:18:44 EST 2011
Archived on: Sat Nov 5 03:17:39 EST 2011

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...