[PATCH 1/2] ARM: gic: add irq_domain support
Rob Herring
robherring2 at gmail.com
Thu Sep 29 13:53:55 EST 2011
From: Rob Herring <rob.herring at calxeda.com>
Convert the gic interrupt controller to use irq domains in preparation
for device-tree binding and MULTI_IRQ. This allows for translation between
GIC interrupt IDs and Linux irq numbers.
The meaning of irq_offset has changed. It now is just the number of skipped
GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32
for secondary GICs.
Cc: Marc Zyngier <marc.zyngier at arm.com>
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
arch/arm/common/Kconfig | 1 +
arch/arm/common/gic.c | 80 ++++++++++++++++++++--------------
arch/arm/include/asm/hardware/gic.h | 3 +
3 files changed, 51 insertions(+), 33 deletions(-)
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 4b71766..74df9ca 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,4 +1,5 @@
config ARM_GIC
+ select IRQ_DOMAIN
bool
config ARM_VIC
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 8b5be72..fa59c99 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -29,6 +29,7 @@
#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -73,7 +74,7 @@ static inline void __iomem *gic_cpu_base(struct irq_data *d)
static inline unsigned int gic_irq(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return d->irq - gic_data->irq_offset;
+ return d->hwirq + gic_data->irq_offset;
}
/*
@@ -81,7 +82,7 @@ static inline unsigned int gic_irq(struct irq_data *d)
*/
static void gic_mask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
spin_lock(&irq_controller_lock);
writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
@@ -92,7 +93,7 @@ static void gic_mask_irq(struct irq_data *d)
static void gic_unmask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
spin_lock(&irq_controller_lock);
if (gic_arch_extn.irq_unmask)
@@ -173,7 +174,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
bool force)
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
- unsigned int shift = (d->irq % 4) * 8;
+ unsigned int shift = (gic_irq(d) % 4) * 8;
unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
u32 val, mask, bit;
@@ -224,7 +225,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
if (gic_irq == 1023)
goto out;
- cascade_irq = gic_irq + chip_data->irq_offset;
+ cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq);
if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
do_bad_IRQ(cascade_irq, desc);
else
@@ -256,10 +257,10 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
-static void __init gic_dist_init(struct gic_chip_data *gic,
- unsigned int irq_start)
+static void __init gic_dist_init(struct gic_chip_data *gic)
{
- unsigned int gic_irqs, irq_limit, i;
+ unsigned int gic_irqs = gic->gic_irqs;
+ unsigned int i;
u32 cpumask;
void __iomem *base = gic->dist_base;
u32 cpu = 0;
@@ -275,17 +276,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
writel_relaxed(0, base + GIC_DIST_CTRL);
/*
- * Find out how many interrupts are supported.
- * The GIC only supports up to 1020 interrupt sources.
- */
- gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
- gic_irqs = (gic_irqs + 1) * 32;
- if (gic_irqs > 1020)
- gic_irqs = 1020;
-
- gic->gic_irqs = gic_irqs;
-
- /*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
@@ -311,19 +301,13 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
- * Limit number of interrupts registered to the platform maximum
- */
- irq_limit = gic->irq_offset + gic_irqs;
- if (WARN_ON(irq_limit > NR_IRQS))
- irq_limit = NR_IRQS;
-
- /*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < irq_limit; i++) {
- irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
- irq_set_chip_data(i, gic);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ for (i = 0; i < gic->domain.nr_irq; i++) {
+ int irq = irq_domain_to_irq(&gic->domain, i);
+ irq_set_chip_and_handler(irq, &gic_chip, handle_fasteoi_irq);
+ irq_set_chip_data(irq, gic);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
writel_relaxed(1, base + GIC_DIST_CTRL);
@@ -535,23 +519,53 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
}
#endif
+const struct irq_domain_ops gic_irq_domain_ops = {
+};
+
void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
struct gic_chip_data *gic;
+ struct irq_domain *domain;
+ int gic_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
gic = &gic_data[gic_nr];
+ domain = &gic->domain;
gic->dist_base = dist_base;
gic->cpu_base = cpu_base;
- gic->irq_offset = (irq_start - 1) & ~31;
- if (gic_nr == 0)
+ /*
+ * For primary GICs, skip over SGIs.
+ * For secondary GICs, skip over PPIs, too.
+ */
+ if (gic_nr == 0) {
gic_cpu_base_addr = cpu_base;
+ gic->irq_offset = 16;
+ irq_start = (irq_start & ~31) + 16;
+ } else
+ gic->irq_offset = 32;
+
+ /*
+ * Find out how many interrupts are supported.
+ * The GIC only supports up to 1020 interrupt sources.
+ */
+ gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
+ gic->gic_irqs = gic_irqs;
+
+ domain->nr_irq = gic_irqs - gic->irq_offset;
+ domain->irq_base = irq_alloc_descs(-1, irq_start, domain->nr_irq,
+ numa_node_id());
+ domain->priv = gic;
+ domain->ops = &gic_irq_domain_ops;
+ irq_domain_add(domain);
gic_chip.flags |= gic_arch_extn.flags;
- gic_dist_init(gic, irq_start);
+ gic_dist_init(gic);
gic_cpu_init(gic);
gic_pm_init(gic);
}
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index c562705..4893b10 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -33,6 +33,8 @@
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
+#include <linux/irqdomain.h>
+
extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
@@ -53,6 +55,7 @@ struct gic_chip_data {
u32 __percpu *saved_ppi_enable;
u32 __percpu *saved_ppi_conf;
#endif
+ struct irq_domain domain;
unsigned int gic_irqs;
};
#endif
--
1.7.5.4
More information about the devicetree-discuss
mailing list