[PATCH 4/6] DMA: PL330: Add device tree support

Thomas Abraham thomas.abraham at linaro.org
Mon Sep 19 16:29:00 EST 2011


For PL330 dma controllers instantiated from device tree, the channel
lookup is based on phandle of the dma controller and dma request id
specified by the client node. During probe, the private data of each
channel of the controller is set to point to the device node of the
dma controller. The 'chan_id' of the each channel is used as the
dma request id.

Client driver requesting dma channels specify the phandle of the
dma controller and the request id. The pl330 filter function
converts the phandle to the device node pointer and matches that
with channel's private data. If a match is found, the request id
from the client node and the 'chan_id' of the channel is matched.
A channel is found if both the values match.

Cc: Jassi Brar <jassisinghbrar at gmail.com>
Cc: Boojin Kim <boojin.kim at samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
Reviewed-by: Rob Herring <rob.herring at calxeda.com>
Acked-by: Jassi Brar <jassisinghbrar at gmail.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
---
 .../devicetree/bindings/dma/arm-pl330.txt          |   30 ++++++++++++++++++
 drivers/dma/pl330.c                                |   33 +++++++++++++++++--
 2 files changed, 59 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/arm-pl330.txt

diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
new file mode 100644
index 0000000..a4cd273
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt
@@ -0,0 +1,30 @@
+* ARM PrimeCell PL330 DMA Controller
+
+The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+between memory and peripherals or memory to memory.
+
+Required properties:
+  - compatible: should include both "arm,pl330" and "arm,primecell".
+  - reg: physical base address of the controller and length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+
+Example:
+
+	pdma0: pdma at 12680000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x12680000 0x1000>;
+		interrupts = <99>;
+	};
+
+Client drivers (device nodes requiring dma transfers from dev-to-mem or
+mem-to-dev) should specify the DMA channel numbers using a two-value pair
+as shown below.
+
+  [property name]  = <[phandle of the dma controller] [dma request id]>;
+
+      where 'dma request id' is the dma request number which is connected
+      to the client controller. The 'property name' is recommended to be
+      of the form <name>-dma-channel.
+
+  Example:  tx-dma-channel = <&pdma0 12>;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 992bf82..7a4ebf1 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -19,6 +19,7 @@
 #include <linux/amba/pl330.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>
+#include <linux/of.h>
 
 #define NR_DEFAULT_DESC	16
 
@@ -277,6 +278,20 @@ bool pl330_filter(struct dma_chan *chan, void *param)
 	if (chan->device->dev->driver != &pl330_driver.drv)
 		return false;
 
+#ifdef CONFIG_OF
+	if (chan->device->dev->of_node) {
+		const __be32 *prop_value;
+		phandle phandle;
+		struct device_node *node;
+
+		prop_value = ((struct property *)param)->value;
+		phandle = be32_to_cpup(prop_value++);
+		node = of_find_node_by_phandle(phandle);
+		return ((chan->private == node) &&
+				(chan->chan_id == be32_to_cpup(prop_value)));
+	}
+#endif
+
 	peri_id = chan->private;
 	return *peri_id == (unsigned)param;
 }
@@ -855,12 +870,17 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 	INIT_LIST_HEAD(&pd->channels);
 
 	/* Initialize channel parameters */
-	num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan);
+	num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri,
+			(u8)pi->pcfg.num_chan);
 	pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
 
 	for (i = 0; i < num_chan; i++) {
 		pch = &pdmac->peripherals[i];
-		pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
+		if (!adev->dev.of_node)
+			pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
+		else
+			pch->chan.private = adev->dev.of_node;
+
 		INIT_LIST_HEAD(&pch->work_list);
 		spin_lock_init(&pch->lock);
 		pch->pl330_chid = NULL;
@@ -874,10 +894,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 	}
 
 	pd->dev = &adev->dev;
-	if (pdat)
+	if (pdat) {
 		pd->cap_mask = pdat->cap_mask;
-	else
+	} else {
 		dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+		if (pi->pcfg.num_peri) {
+			dma_cap_set(DMA_SLAVE, pd->cap_mask);
+			dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+		}
+	}
 
 	pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
 	pd->device_free_chan_resources = pl330_free_chan_resources;
-- 
1.6.6.rc2



More information about the devicetree-discuss mailing list