[PATCH 05/13] documentation/dt: Add TWL4030 and TWL6030 bindings

Benoit Cousson b-cousson at ti.com
Fri Sep 2 03:21:21 EST 2011


Add documentation for the Texas Instruments TWL Integrated Chip.

Cc: Randy Dunlap <rdunlap at xenotime.net>
Signed-off-by: Benoit Cousson <b-cousson at ti.com>
---
 .../devicetree/bindings/mfd/twl-familly.txt        |   47 ++++++++++++++++++++
 1 files changed, 47 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/twl-familly.txt

diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 0000000..ff4cacd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+  For Integrated power-management/audio CODEC device used in OMAP3
+  based boards
+- compatible : Must be "ti,twl6030";
+  For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+  it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of severals variants
+  that support a different number of features.
+  The children nodes will thus depend of the capabilty of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl at 48 {
+    compatible = "ti,twl6030";
+    reg = <0x48>;
+    interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+    interrupt-controller;
+    #interrupt-cells = <1>;
+    interrupt-parent = <&gic>;
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    twl_rtc {
+        compatible = "ti,twl_rtc";
+        interrupts = <11>;
+        reg = <0>;
+    };
+};
-- 
1.7.0.4



More information about the devicetree-discuss mailing list