[RFC PATCH 09/10] arm/dts: OMAP4: Add gpio nodes
Grant Likely
grant.likely at secretlab.ca
Fri Sep 9 04:16:20 EST 2011
On Wed, Aug 24, 2011 at 03:09:15PM +0200, Benoit Cousson wrote:
> Add the 6 GPIOs controller nodes.
> Since the GPIO driver is still under cleanup, a couple of temp
> hacks are needed. They will be removed as soon as the driver will
> be cleaned.
>
> Remove gpio static device initialisation if CONFIG_OF is defined.
>
> Signed-off-by: Benoit Cousson <b-cousson at ti.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Charulatha V <charu at ti.com>
> ---
> arch/arm/boot/dts/omap4.dtsi | 69 ++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/gpio.c | 2 +
> 2 files changed, 71 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 231d7b4..f672927 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -110,5 +110,74 @@
> compatible = "ti,omap-spinlock";
> hwmods = "spinlock";
> };
> +
> + gpio1: gpio at 1 {
> + compatible = "ti,omap4-gpio", "ti,omap-gpio";
> + hwmods = "gpio1";
> + /* id should not be needed with a global GPIO parent */
> + id = <1>;
> + bank_width = <32>;
> + debounce;
> + /* XXX: big hack until the bank_count is removed */
> + bank_count = <6>;
> + no_idle_on_suspend;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + gpio2: gpio at 2 {
> + compatible = "ti,omap4-gpio", "ti,omap-gpio";
> + hwmods = "gpio2";
> + id = <2>;
> + bank_width = <32>;
> + debounce;
> + no_idle_on_suspend;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + gpio3: gpio at 3 {
> + compatible = "ti,omap4-gpio", "ti,omap-gpio";
> + hwmods = "gpio3";
> + id = <3>;
> + bank_width = <32>;
> + debounce;
> + no_idle_on_suspend;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + gpio4: gpio at 4 {
> + compatible = "ti,omap4-gpio", "ti,omap-gpio";
> + hwmods = "gpio4";
> + id = <4>;
> + bank_width = <32>;
> + debounce;
> + no_idle_on_suspend;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + gpio5: gpio at 5 {
> + compatible = "ti,omap4-gpio", "ti,omap-gpio";
> + hwmods = "gpio5";
> + id = <5>;
> + bank_width = <32>;
> + debounce;
> + no_idle_on_suspend;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + gpio6: gpio at 6 {
> + compatible = "ti,omap4-gpio", "ti,omap-gpio";
> + hwmods = "gpio6";
> + id = <6>;
> + bank_width = <32>;
> + debounce;
> + no_idle_on_suspend;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> };
> };
> diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
> index 8cbfbc2..c51e952 100644
> --- a/arch/arm/mach-omap2/gpio.c
> +++ b/arch/arm/mach-omap2/gpio.c
> @@ -16,6 +16,7 @@
> * GNU General Public License for more details.
> */
>
> +#ifndef CONFIG_OF
> #include <linux/gpio.h>
> #include <linux/err.h>
> #include <linux/slab.h>
> @@ -126,3 +127,4 @@ static int __init omap2_gpio_init(void)
> NULL);
> }
> postcore_initcall(omap2_gpio_init);
> +#endif
Same as on earlier patch, don't #ifndef CONFIG_OF out non-DT code.
g.
> --
> 1.7.0.4
>
More information about the devicetree-discuss
mailing list