[RFC PATCH 03/10] documentation/dt: Add l3-noc bindings

[Grant Likely]

On Wed, Aug 24, 2011 at 03:09:09PM +0200, Benoit Cousson wrote:
> Add documentation for the l3-noc bindings.
> 
> Signed-off-by: Benoit Cousson <b-cousson at ti.com>
> Cc: Randy Dunlap <rdunlap at xenotime.net>
> ---
>  .../devicetree/bindings/arm/omap/l3-noc.txt        |   18 ++++++++++++++++++
>  1 files changed, 18 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/omap/l3-noc.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
> new file mode 100644
> index 0000000..dbfa878
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
> @@ -0,0 +1,18 @@
> +* TI - L3 Network On Chip (NoC)
> +
> +This version is an implementation of the generic NoC IP
> +provided by Arteris.

Hahaha.  Here's the documentation.  Okay.

> +
> +Required properties:
> +- compatible : Should be "ti,l3-noc", "arteris,noc"

Should probably be "ti,omap4-l3-noc", and it isn't necessary to have a
value for the IP core vendor... or at least if an arteris value is
provided, then it should have some form of ip-core version
information.

> +- hwmods: "l3_main_1", ... One hwmod for each noc domain.

Is there some documentation on how the "hwmods" property is to be
used?  I expect that this should be "ti,hwmods" because this is a TI
specific property.

> +
> +Examples:
> +
> +ocp {
> +	compatible = "ti,l3-noc", "arteris,noc", "simple-bus";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	ranges;
> +	hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
> +};
> -- 
> 1.7.0.4
>