[PATCH 09/13] arm/dts: omap4-sdp: Add twl6030 node
Benoit Cousson
b-cousson at ti.com
Fri Sep 2 03:21:25 EST 2011
Add the twl6030 node inside the i2c1 controller node.
Add the RTC submodule inside the twl node.
This is just the minimal support needed to boot OMAP4 boards
without any crash.
The support for all the features included in this MFD will be added
later.
Signed-off-by: Benoit Cousson <b-cousson at ti.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
---
arch/arm/boot/dts/omap4-sdp.dts | 25 +++++++++++++++++++++++--
1 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index ed85b35..d03f2e7 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -26,12 +26,33 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
-
-
};
&i2c1 {
clock-frequency = <400000>;
+
+ /*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+ twl at 48 {
+ compatible = "ti,twl6030";
+ reg = <0x48>;
+ interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ /* twl is a MFD, so it will contain a bunch of sub-ips */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ranges = <0 0x48>;
+
+ twl_rtc {
+ compatible = "ti,twl_rtc";
+ interrupts = <11>;
+ reg = <0>;
+ };
+ };
};
&i2c2 {
--
1.7.0.4
More information about the devicetree-discuss
mailing list