[RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver

[Cousson, Benoit]

On 9/8/2011 8:03 PM, Grant Likely wrote:
> On Wed, Aug 24, 2011 at 03:09:08PM +0200, Benoit Cousson wrote:
>> Used the main OCP node to add bindings with the l3_noc driver.
>> Remove l3_noc static device creation if CONFIG_OF is defined.
>>
>> Signed-off-by: Benoit Cousson<b-cousson at ti.com>
>> Cc: Tony Lindgren<tony at atomide.com>
>> Cc: Santosh Shilimkar<santosh.shilimkar at ti.com>
>> ---
>>   arch/arm/boot/dts/omap4.dtsi  |    3 ++-
>>   arch/arm/mach-omap2/devices.c |    2 ++
>>   2 files changed, 4 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 97a3ea7..928a74c 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -64,10 +64,11 @@
>>   	 * hierarchy.
>>   	 */
>>   	ocp {
>> -		compatible = "simple-bus";
>> +		compatible = "ti,l3-noc", "arteris,noc", "simple-bus";
>>   		#address-cells =<1>;
>>   		#size-cells =<1>;
>>   		ranges;
>> +		hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
>>
>>   		gic: interrupt-controller at 48241000 {
>>   			compatible = "ti,omap4-gic", "arm,gic";
>> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
>> index 2d4a199..5964650 100644
>> --- a/arch/arm/mach-omap2/devices.c
>> +++ b/arch/arm/mach-omap2/devices.c
>> @@ -70,6 +70,7 @@ static int __init omap3_l3_init(void)
>>   }
>>   postcore_initcall(omap3_l3_init);
>>
>> +#ifndef CONFIG_OF
>>   static int __init omap4_l3_init(void)
>>   {
>>   	int l, i;
>> @@ -100,6 +101,7 @@ static int __init omap4_l3_init(void)
>>   	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
>>   }
>>   postcore_initcall(omap4_l3_init);
>> +#endif
>
> Don't do this.  Turning on CONFIG_OF must not break non-DT booting.
> Instead, check at runtime if a DT is available, and if it does then
> don't run the hook.

Do you want to check only the availability of the DT or the availability 
of that specific node inside the DT?

Benoit