[RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data

Rob Herring robherring2 at gmail.com
Fri Sep 16 04:30:08 EST 2011


On 09/15/2011 06:21 AM, Rajendra Nayak wrote:
> The helper routine is meant to be used by regulator drivers
> to extract the regulator_init_data structure passed from device tree.
> 'consumer_supplies' which is part of regulator_init_data is not extracted
> as the regulator consumer mappings are passed through DT differently,
> implemented in subsequent patches.
> 
> Also add documentation for regulator bindings to be used to pass
> regulator_init_data struct information from device tree.
> 
> Signed-off-by: Rajendra Nayak <rnayak at ti.com>
> ---
>  .../devicetree/bindings/regulator/regulator.txt    |   37 +++++++++
>  drivers/of/Kconfig                                 |    6 ++
>  drivers/of/Makefile                                |    1 +
>  drivers/of/of_regulator.c                          |   85 ++++++++++++++++++++
>  include/linux/of_regulator.h                       |   23 +++++
>  5 files changed, 152 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/regulator/regulator.txt
>  create mode 100644 drivers/of/of_regulator.c
>  create mode 100644 include/linux/of_regulator.h
> 
> diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
> new file mode 100644
> index 0000000..001e5ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/regulator.txt
> @@ -0,0 +1,37 @@
> +Voltage/Current Regulators
> +
> +Required properties:
> +- compatible: Must be "regulator";

This is way too generic. compatible is not for matching a class of
devices. It is for matching a specific piece of h/w. So I would expect
names like "wolfson,wm8350-dcdc".


> +
> +Optional properties:
> +- supply-regulator: Name of the parent regulator
> +- min-uV: smallest voltage consumers may set
> +- max-uV: largest voltage consumers may set
> +- uV-offset: Offset applied to voltages from consumer to compensate for voltage drops
> +- min-uA: smallest current consumers may set
> +- max-uA: largest current consumers may set
> +- mode-fast: boolean, Can handle fast changes in its load
> +- mode-normal: boolean, Normal regulator power supply mode
> +- mode-idle: boolean, Can be more efficient during light loads
> +- mode-standby: boolean, Can be most efficient during light loads
> +- change-voltage: boolean, Output voltage can be changed by software
> +- change-current: boolean, Output current can be chnaged by software
> +- change-mode: boolean, Operating mode can be changed by software
> +- change-status: boolean, Enable/Disable control for regulator exists
> +- change-drms: boolean, Dynamic regulator mode switching is enabled
> +- input-uV: Input voltage for regulator when supplied by another regulator
> +- initial-mode: Mode to set at startup
> +- always-on: boolean, regulator should never be disabled
> +- boot-on: bootloader/firmware enabled regulator
> +- apply-uV: apply uV constraint if min == max
> +
> +Example:
> +
> +	xyz-regulator: regulator at 0 {
> +		compatible = "regulator";
> +		min-uV = <1000000>;
> +		max-uV = <2500000>;
> +		mode-fast;
> +		change-voltage;
> +		always-on;
> +	};

You need to show how a node references the regulator.

Rob

> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index b3bfea5..296b96d 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -87,4 +87,10 @@ config OF_PCI_IRQ
>  	help
>  	  OpenFirmware PCI IRQ routing helpers
>  
> +config OF_REGULATOR
> +	def_bool y
> +	depends on REGULATOR
> +	help
> +	  OpenFirmware regulator framework helpers
> +
>  endmenu # OF
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index 74b959c..bea2852 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -12,3 +12,4 @@ obj-$(CONFIG_OF_SPI)	+= of_spi.o
>  obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
>  obj-$(CONFIG_OF_PCI)	+= of_pci.o
>  obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o
> +obj-$(CONFIG_OF_REGULATOR) += of_regulator.o
> diff --git a/drivers/of/of_regulator.c b/drivers/of/of_regulator.c
> new file mode 100644
> index 0000000..f01d275
> --- /dev/null
> +++ b/drivers/of/of_regulator.c
> @@ -0,0 +1,85 @@
> +/*
> + * OF helpers for regulator framework
> + *
> + * Copyright (C) 2011 Texas Instruments, Inc.
> + * Rajendra Nayak <rnayak at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regulator/machine.h>
> +
> +static void of_get_regulation_constraints(struct device_node *np,
> +					struct regulator_init_data **init_data)
> +{
> +	unsigned int valid_modes_mask = 0, valid_ops_mask = 0;
> +
> +	of_property_read_u32(np, "min-uV", &(*init_data)->constraints.min_uV);
> +	of_property_read_u32(np, "max-uV", &(*init_data)->constraints.max_uV);
> +	of_property_read_u32(np, "uV-offset", &(*init_data)->constraints.uV_offset);
> +	of_property_read_u32(np, "min-uA", &(*init_data)->constraints.min_uA);
> +	of_property_read_u32(np, "max-uA", &(*init_data)->constraints.max_uA);
> +
> +	/* valid modes mask */
> +	if (of_find_property(np, "mode-fast", NULL))
> +		valid_modes_mask |= REGULATOR_MODE_FAST;
> +	if (of_find_property(np, "mode-normal", NULL))
> +		valid_modes_mask |= REGULATOR_MODE_NORMAL;
> +	if (of_find_property(np, "mode-idle", NULL))
> +		valid_modes_mask |= REGULATOR_MODE_IDLE;
> +	if (of_find_property(np, "mode-standby", NULL))
> +		valid_modes_mask |= REGULATOR_MODE_STANDBY;
> +
> +	/* valid ops mask */
> +	if (of_find_property(np, "change-voltage", NULL))
> +		valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
> +	if (of_find_property(np, "change-current", NULL))
> +		valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
> +	if (of_find_property(np, "change-mode", NULL))
> +		valid_ops_mask |= REGULATOR_CHANGE_MODE;
> +	if (of_find_property(np, "change-status", NULL))
> +		valid_ops_mask |= REGULATOR_CHANGE_STATUS;
> +
> +	(*init_data)->constraints.valid_modes_mask = valid_modes_mask;
> +	(*init_data)->constraints.valid_ops_mask = valid_ops_mask;
> +
> +	of_property_read_u32(np, "input-uV",
> +			&(*init_data)->constraints.input_uV);
> +	of_property_read_u32(np, "initial-mode",
> +			&(*init_data)->constraints.initial_mode);
> +
> +	if (of_find_property(np, "always-on", NULL))
> +			(*init_data)->constraints.always_on = true;
> +	if (of_find_property(np, "boot-on", NULL))
> +			(*init_data)->constraints.boot_on = true;
> +	if (of_find_property(np, "apply-uV", NULL))
> +			(*init_data)->constraints.apply_uV = true;
> +}
> +
> +/**
> + * of_get_regulator_init_data - extarct regulator_init_data structure info
> + * @np: Pointer to regulator device tree node
> + *
> + * Populates regulator_init_data structure by extracting data from device
> + * tree node, returns a pointer to the populated struture or NULL if memory
> + * alloc fails.
> + */
> +struct regulator_init_data *of_get_regulator_init_data(struct device_node *np)
> +{
> +	struct regulator_init_data *init_data;
> +
> +	init_data = kzalloc(sizeof(struct regulator_init_data), GFP_KERNEL);
> +	if (!init_data)
> +		return NULL; /* Out of memory? */
> +
> +	init_data->supply_regulator = (char *)of_get_property(np,
> +						"supply-regulator", NULL);
> +	of_get_regulation_constraints(np, &init_data);
> +	return init_data;
> +}
> +EXPORT_SYMBOL(of_get_regulator_init_data);
> diff --git a/include/linux/of_regulator.h b/include/linux/of_regulator.h
> new file mode 100644
> index 0000000..5eb048c
> --- /dev/null
> +++ b/include/linux/of_regulator.h
> @@ -0,0 +1,23 @@
> +/*
> + * OpenFirmware regulator support routines
> + *
> + */
> +
> +#ifndef __LINUX_OF_REG_H
> +#define __LINUX_OF_REG_H
> +
> +#include <linux/regulator/machine.h>
> +
> +#if defined(CONFIG_OF_REGULATOR)
> +extern struct regulator_init_data
> +	*of_get_regulator_init_data(struct device_node *np);
> +#else
> +static inline struct regulator_init_data
> +	*of_get_regulator_init_data(struct device_node *np)
> +{
> +	return NULL;
> +}
> +#endif /* CONFIG_OF_REGULATOR */
> +
> +#endif /* __LINUX_OF_REG_H */
> +



More information about the devicetree-discuss mailing list