[PATCH] net/smsc911x: Correctly configure 16-bit register access from DT
Grant Likely
grant.likely at secretlab.ca
Thu Sep 15 02:12:08 EST 2011
On Tue, Sep 13, 2011 at 11:49:29AM +0100, Dave Martin wrote:
> The SMSC911X_USE_16BIT needs to be set when using 16-bit register
> access. However, currently no flag is set if the device tree
> doesn't specify 32-bit access, resulting in a BUG() and a non-
> working driver when 16-bit register access is configured for
> smsc911x in the DT.
>
> This patch should set the SMSC911X_USE_16BIT flag in a manner
> consistent with the documented DT bindings.
>
> Signed-off-by: Dave Martin <dave.martin at linaro.org>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
> ---
> drivers/net/ethernet/smsc/smsc911x.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
> index 788c4fd..a3aa4c0 100644
> --- a/drivers/net/ethernet/smsc/smsc911x.c
> +++ b/drivers/net/ethernet/smsc/smsc911x.c
> @@ -2121,6 +2121,8 @@ static int __devinit smsc911x_probe_config_dt(
> of_property_read_u32(np, "reg-io-width", &width);
> if (width == 4)
> config->flags |= SMSC911X_USE_32BIT;
> + else
> + config->flags |= SMSC911X_USE_16BIT;
>
> if (of_get_property(np, "smsc,irq-active-high", NULL))
> config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
> --
> 1.7.4.1
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
More information about the devicetree-discuss
mailing list