May 2020 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri May 1 00:19:58 AEST 2020
Ending: Sun May 31 18:38:04 AEST 2020
Messages: 1804

• [PATCH] i2c: powermac: use true,false for bool variable   Wolfram Sang
• [PATCH v2 3/3] device-dax: Add system ram (add_memory()) with MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
• [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Eric W. Biederman
  • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
    • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dave Hansen
    • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Eric W. Biederman
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Eric W. Biederman
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Andrew Morton
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   David Hildenbrand
      • [PATCH v2 2/3] mm/memory_hotplug: Introduce MHP_NO_FIRMWARE_MEMMAP   Dan Williams
• [PATCH 00/37] net: manually convert files to ReST format - part 2   Mauro Carvalho Chehab
  • [PATCH 07/37] docs: networking: convert netconsole.txt to ReST   Mauro Carvalho Chehab
  • [PATCH 00/37] net: manually convert files to ReST format - part 2   David Miller
• [PATCH] net/bonding: Do not transition down slave after speed/duplex check   Thomas Falcon
• [PATCH v4 00/19] Manually convert thermal, crypto and misc devices to ReST   Mauro Carvalho Chehab
• [PATCH v4 14/19] docs: powerpc: convert vcpudispatch_stats.txt to ReST   Mauro Carvalho Chehab
• [PATCH net] ibmvnic: Skip fatal error reset after passive init   Juliet Kim
  • [PATCH net] ibmvnic: Skip fatal error reset after passive init   David Miller
• [PATCH v3 0/2] PCI/ERR: Allow Native AER/DPC using _OSC   Jon Derrick
  • [PATCH v3 1/2] PCI/AER: Use _OSC to determine Firmware First before HEST   Jon Derrick
  • [PATCH v3 2/2] PCI/DPC: Use _OSC to determine DPC support   Jon Derrick
  • [PATCH v3 0/2] PCI/ERR: Allow Native AER/DPC using _OSC   Bjorn Helgaas
    • [PATCH v3 0/2] PCI/ERR: Allow Native AER/DPC using _OSC   Derrick, Jonathan
      • [PATCH v3 0/2] PCI/ERR: Allow Native AER/DPC using _OSC   Derrick, Jonathan
      • [PATCH v3 0/2] PCI/ERR: Allow Native AER/DPC using _OSC   Bjorn Helgaas
      • [PATCH v3 0/2] PCI/ERR: Allow Native AER/DPC using _OSC   Kuppuswamy, Sathyanarayanan
• [PATCH V1 00/10] Remove duplicated kmap code   ira.weiny at intel.com
  • [PATCH V1 01/10] arch/kmap: Remove BUG_ON()   ira.weiny at intel.com
    • [PATCH V1 01/10] arch/kmap: Remove BUG_ON()   Christoph Hellwig
  • [PATCH V1 02/10] arch/xtensa: Move kmap build bug out of the way   ira.weiny at intel.com
    • [PATCH V1 02/10] arch/xtensa: Move kmap build bug out of the way   Christoph Hellwig
  • [PATCH V1 03/10] arch/kmap: Remove redundant arch specific kmaps   ira.weiny at intel.com
    • [PATCH V1 03/10] arch/kmap: Remove redundant arch specific kmaps   Christoph Hellwig
  • [PATCH V1 04/10] arch/kunmap: Remove duplicate kunmap implementations   ira.weiny at intel.com
    • [PATCH V1 04/10] arch/kunmap: Remove duplicate kunmap implementations   Christoph Hellwig
  • [PATCH V1 05/10] arch/kmap_atomic: Consolidate duplicate code   ira.weiny at intel.com
    • [PATCH V1 05/10] arch/kmap_atomic: Consolidate duplicate code   Al Viro
    • [PATCH V1 05/10] arch/kmap_atomic: Consolidate duplicate code   Christoph Hellwig
  • [PATCH V1 06/10] arch/kunmap_atomic: Consolidate duplicate code   ira.weiny at intel.com
    • [PATCH V1 06/10] arch/kunmap_atomic: Consolidate duplicate code   Christoph Hellwig
  • [PATCH V1 07/10] arch/kmap: Ensure kmap_prot visibility   ira.weiny at intel.com
    • sparc-related comment, to Re: [PATCH V1 07/10] arch/kmap: Ensure kmap_prot visibility   Christoph Hellwig
      • sparc-related comment, to Re: [PATCH V1 07/10] arch/kmap: Ensure kmap_prot visibility   Ira Weiny
  • [PATCH V1 08/10] arch/kmap: Don't hard code kmap_prot values   ira.weiny at intel.com
    • [PATCH V1 08/10] arch/kmap: Don't hard code kmap_prot values   Al Viro
    • [PATCH V1 08/10] arch/kmap: Don't hard code kmap_prot values   Christoph Hellwig
  • [PATCH V1 09/10] arch/kmap: Define kmap_atomic_prot() for all arch's   ira.weiny at intel.com
    • [PATCH V1 09/10] arch/kmap: Define kmap_atomic_prot() for all arch's   Al Viro
      • [PATCH V1 09/10] arch/kmap: Define kmap_atomic_prot() for all arch's   Al Viro
      • [PATCH V1 09/10] arch/kmap: Define kmap_atomic_prot() for all arch's   Ira Weiny
    • [PATCH V1 09/10] arch/kmap: Define kmap_atomic_prot() for all arch's   Christoph Hellwig
  • [PATCH V1 10/10] drm: Remove drm specific kmap_atomic code   ira.weiny at intel.com
    • [PATCH V1 10/10] drm: Remove drm specific kmap_atomic code   Christian König
    • [PATCH V1 10/10] drm: Remove drm specific kmap_atomic code   Christoph Hellwig
  • [PATCH V1 00/10] Remove duplicated kmap code   Michael Ellerman
  • [PATCH V1 00/10] Remove duplicated kmap code   Christoph Hellwig
    • [PATCH V1 00/10] Remove duplicated kmap code   Ira Weiny
• Don't initialise ports with no PHY   Darren Stevens
  • Don't initialise ports with no PHY   Darren Stevens
    • Don't initialise ports with no PHY   Christian Zigotzky
• [PATCH 21/29] mm: remove the pgprot argument to __vmalloc   John Dorminy
  • [PATCH 21/29] mm: remove the pgprot argument to __vmalloc   John Dorminy
    • [PATCH 21/29] mm: remove the pgprot argument to __vmalloc   Andrew Morton
• [PATCH v3 0/3] Offline memoryless cpuless node 0   Srikar Dronamraju
  • [PATCH v3 1/3] powerpc/numa: Set numa_node for all possible cpus   Srikar Dronamraju
    • [PATCH v3 1/3] powerpc/numa: Set numa_node for all possible cpus   Christopher Lameter
      • [PATCH v3 1/3] powerpc/numa: Set numa_node for all possible cpus   Srikar Dronamraju
      • [PATCH v3 1/3] powerpc/numa: Set numa_node for all possible cpus   Michael Ellerman
  • [PATCH v3 2/3] powerpc/numa: Prefer node id queried from vphn   Srikar Dronamraju
  • [PATCH v3 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Srikar Dronamraju
    • [PATCH v3 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Christopher Lameter
      • [PATCH v3 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Srikar Dronamraju
• [PATCH v7 00/28] Initial Prefixed Instruction support   Jordan Niethe
  • [PATCH v7 01/28] powerpc/xmon: Remove store_inst() for patch_instruction()   Jordan Niethe
  • [PATCH v7 02/28] powerpc/xmon: Move breakpoint instructions to own array   Jordan Niethe
    • [PATCH v7 02/28] powerpc/xmon: Move breakpoint instructions to own array   Alistair Popple
      • [PATCH v7 02/28] powerpc/xmon: Move breakpoint instructions to own array   Jordan Niethe
  • [PATCH v7 03/28] powerpc/xmon: Move breakpoints to text section   Jordan Niethe
  • [PATCH v7 04/28] powerpc/xmon: Use bitwise calculations in_breakpoint_table()   Jordan Niethe
    • [PATCH v7 04/28] powerpc/xmon: Use bitwise calculations in_breakpoint_table()   Alistair Popple
    • [PATCH v7 04/28] powerpc/xmon: Use bitwise calculations in_breakpoint_table()   Michael Ellerman
      • [PATCH v7 04/28] powerpc/xmon: Use bitwise calculations in_breakpoint_table()   Jordan Niethe
  • [PATCH v7 05/28] powerpc: Change calling convention for create_branch() et. al.   Jordan Niethe
    • [PATCH v7 05/28] powerpc: Change calling convention for create_branch() et. al.   Alistair Popple
  • [PATCH v7 06/28] powerpc: Use a macro for creating instructions from u32s   Jordan Niethe
    • [PATCH v7 06/28] powerpc: Use a macro for creating instructions from u32s   Alistair Popple
  • [PATCH v7 07/28] powerpc: Use an accessor for instructions   Jordan Niethe
  • [PATCH v7 08/28] powerpc: Use a function for getting the instruction op code   Jordan Niethe
    • [PATCH v7 08/28] powerpc: Use a function for getting the instruction op code   Alistair Popple
  • [PATCH v7 09/28] powerpc: Use a function for byte swapping instructions   Jordan Niethe
  • [PATCH v7 10/28] powerpc: Introduce functions for instruction equality   Jordan Niethe
  • [PATCH v7 11/28] powerpc: Use a datatype for instructions   Jordan Niethe
    • [PATCH v7 11/28] powerpc: Use a datatype for instructions   kbuild test robot
  • [PATCH v7 12/28] powerpc: Use a function for reading instructions   Jordan Niethe
    • [PATCH v7 12/28] powerpc: Use a function for reading instructions   Alistair Popple
  • [PATCH v7 13/28] powerpc: Add a probe_user_read_inst() function   Jordan Niethe
    • [PATCH v7 13/28] powerpc: Add a probe_user_read_inst() function   Alistair Popple
  • [PATCH v7 14/28] powerpc: Add a probe_kernel_read_inst() function   Jordan Niethe
    • [PATCH v7 14/28] powerpc: Add a probe_kernel_read_inst() function   Alistair Popple
  • [PATCH v7 15/28] powerpc/kprobes: Use patch_instruction()   Jordan Niethe
    • [PATCH v7 15/28] powerpc/kprobes: Use patch_instruction()   Alistair Popple
  • [PATCH v7 16/28] powerpc: Define and use __get_user_instr{, inatomic}()   Jordan Niethe
    • [PATCH v7 16/28] powerpc: Define and use __get_user_instr{, inatomic}()   Alistair Popple
  • [PATCH v7 17/28] powerpc: Introduce a function for reporting instruction length   Jordan Niethe
    • [PATCH v7 17/28] powerpc: Introduce a function for reporting instruction length   Alistair Popple
  • [PATCH v7 18/28] powerpc/xmon: Use a function for reading instructions   Jordan Niethe
    • [PATCH v7 18/28] powerpc/xmon: Use a function for reading instructions   Alistair Popple
  • [PATCH v7 19/28] powerpc/xmon: Move insertion of breakpoint for xol'ing   Jordan Niethe
    • [PATCH v7 19/28] powerpc/xmon: Move insertion of breakpoint for xol'ing   Alistair Popple
  • [PATCH v7 20/28] powerpc: Make test_translate_branch() independent of instruction length   Jordan Niethe
    • [PATCH v7 20/28] powerpc: Make test_translate_branch() independent of instruction length   Alistair Popple
  • [PATCH v7 21/28] powerpc: Enable Prefixed Instructions   Jordan Niethe
  • [PATCH v7 22/28] powerpc: Define new SRR1 bits for a future ISA version   Jordan Niethe
    • [PATCH v7 22/28] powerpc: Define new SRR1 bits for a future ISA version   Alistair Popple
  • [PATCH v7 23/28] powerpc: Add prefixed instructions to instruction data type   Jordan Niethe
    • [PATCH v7 23/28] powerpc: Add prefixed instructions to instruction data type   Alistair Popple
  • [PATCH v7 24/28] powerpc: Test prefixed code patching   Jordan Niethe
    • [PATCH v7 24/28] powerpc: Test prefixed code patching   Alistair Popple
  • [PATCH v7 25/28] powerpc: Test prefixed instructions in feature fixups   Jordan Niethe
    • [PATCH v7 25/28] powerpc: Test prefixed instructions in feature fixups   Alistair Popple
      • [PATCH v7 25/28] powerpc: Test prefixed instructions in feature fixups   Jordan Niethe
  • [PATCH v7 26/28] powerpc: Support prefixed instructions in alignment handler   Jordan Niethe
    • [PATCH v7 26/28] powerpc: Support prefixed instructions in alignment handler   Alistair Popple
  • [PATCH v7 27/28] powerpc sstep: Add support for prefixed load/stores   Jordan Niethe
  • [PATCH v7 28/28] powerpc sstep: Add support for prefixed fixed-point arithmetic   Jordan Niethe
• [PATCH v5 0/5] Track and expose idle PURR and SPURR ticks   Gautham R Shenoy
• [PATCH 0/3] ASoC: fsl_esai: Add support for imx8qm   Shengjiu Wang
  • [PATCH 1/3] ASoC: fsl_esai: introduce SoC specific data   Shengjiu Wang
    • [PATCH 1/3] ASoC: fsl_esai: introduce SoC specific data   Nicolin Chen
  • [PATCH 2/3] ASoC: fsl_esai: Add support for imx8qm   Shengjiu Wang
    • [PATCH 2/3] ASoC: fsl_esai: Add support for imx8qm   Mark Brown
      • [PATCH 2/3] ASoC: fsl_esai: Add support for imx8qm   Shengjiu Wang
      • [PATCH 2/3] ASoC: fsl_esai: Add support for imx8qm   Shengjiu Wang
      • [PATCH 2/3] ASoC: fsl_esai: Add support for imx8qm   Mark Brown
      • [PATCH 2/3] ASoC: fsl_esai: Add support for imx8qm   Shengjiu Wang
  • [PATCH 3/3] ASoC: fsl_esai: Add new compatible string for imx8qm   Shengjiu Wang
    • [PATCH 3/3] ASoC: fsl_esai: Add new compatible string for imx8qm   Rob Herring
• [powerpc:topic/uaccess] BUILD REGRESSION 5bb3b9d986426296507d3ef58d1e5fe4625de01f   kbuild test robot
• [PATCH v2] powerpc/ima: fix secure boot rules in ima arch policy   Nayna Jain
  • [PATCH v2] powerpc/ima: fix secure boot rules in ima arch policy   Mimi Zohar
  • [PATCH v2] powerpc/ima: fix secure boot rules in ima arch policy   Michael Ellerman
• [PATCH v8 4/7] perf/tools: Enhance JSON/metric infrastructure to handle "?"   Ian Rogers
• [RFC PATCH v2 3/5] powerpc/lib: Use a temporary mm for code patching   Christopher M. Riedl
• [RFC PATCH v2 1/5] powerpc/mm: Introduce temporary mm   Christopher M. Riedl
  • [RFC PATCH v2 1/5] powerpc/mm: Introduce temporary mm   Christopher M. Riedl
• 5.7-rc interrupt_return Unrecoverable exception 380   Hugh Dickins
  • 5.7-rc interrupt_return Unrecoverable exception 380   Nicholas Piggin
• [PATCH] powerpc: Drop CONFIG_MTD_M25P80 in 5xx-hw.config   Bin Meng
• [PATCH v2] powerpc: Drop CONFIG_MTD_M25P80 in 85xx-hw.config   Bin Meng
• [powerpc:topic/uaccess-ppc] BUILD SUCCESS 4fe5cda9f89d0aea8e915b7c96ae34bda4e12e51   kbuild test robot
• [powerpc:fixes-test] BUILD SUCCESS e2abb0f00606ece8b191679bbc3f9246738fb88e   kbuild test robot
• [PATCH v2 00/12] powerpc/book3s/64/pkeys: Simplify the code   Aneesh Kumar K.V
  • [PATCH v2 01/12] powerpc/book3s64/pkeys: Fixup bit numbering   Aneesh Kumar K.V
  • [PATCH v2 02/12] powerpc/book3s64/pkeys: pkeys are supported only on hash on book3s.   Aneesh Kumar K.V
  • [PATCH v2 03/12] powerpc/book3s64/pkeys: Move pkey related bits in the linux page table   Aneesh Kumar K.V
  • [PATCH v2 04/12] powerpc/book3s64/pkeys: Explain key 1 reservation details   Aneesh Kumar K.V
  • [PATCH v2 05/12] powerpc/book3s64/pkeys: Simplify the key initialization   Aneesh Kumar K.V
  • [PATCH v2 06/12] powerpc/book3s64/pkeys: Prevent key 1 modification from userspace.   Aneesh Kumar K.V
  • [PATCH v2 07/12] powerpc/book3s64/pkeys: kill cpu feature key CPU_FTR_PKEY   Aneesh Kumar K.V
  • [PATCH v2 08/12] powerpc/book3s64/pkeys: Convert execute key support to static key   Aneesh Kumar K.V
  • [PATCH v2 09/12] powerpc/book3s64/pkeys: Simplify pkey disable branch   Aneesh Kumar K.V
  • [PATCH v2 10/12] powerpc/book3s64/pkeys: Convert pkey_total to max_pkey   Aneesh Kumar K.V
  • [PATCH v2 11/12] powerpc/book3s64/pkeys: Make initial_allocation_mask static   Aneesh Kumar K.V
  • [PATCH v2 12/12] powerpc/book3s64/pkeys: Mark all the pkeys above max pkey as reserved   Aneesh Kumar K.V
• [RFC PATCH 00/10] OPAL V4   Nicholas Piggin
  • [RFC PATCH 02/10] powerpc/powernv: Wire up OPAL address lookups   Nicholas Piggin
  • [RFC PATCH 03/10] powerpc/powernv: Use OPAL_REPORT_TRAP to cope with trap interrupts from OPAL   Nicholas Piggin
  • [RFC PATCH 04/10] powerpc/powernv: avoid polling in opal_get_chars   Nicholas Piggin
  • [RFC PATCH 05/10] powerpc/powernv: Don't translate kernel addresses to real addresses for OPAL   Nicholas Piggin
  • [RFC PATCH 06/10] powerpc/powernv: opal use new opal call entry point if it exists   Nicholas Piggin
    • [RFC PATCH 06/10] powerpc/powernv: opal use new opal call entry point if it exists   Gautham R Shenoy
  • [RFC PATCH 07/10] powerpc/powernv: Add OPAL_FIND_VM_AREA API   Nicholas Piggin
  • [RFC PATCH 08/10] powerpc/powernv: Set up an mm context to call OPAL in   Nicholas Piggin
  • [RFC PATCH 09/10] powerpc/powernv: OPAL V4 OS services   Nicholas Piggin
  • [RFC PATCH 10/10] powerpc/powernv: OPAL V4 Implement vm_map/unmap service   Nicholas Piggin
• [RFC PATCH 01/10] kallsyms: architecture specific symbol lookups   Nicholas Piggin
• [PATCH v2 00/28] Kernel userspace access/execution prevention with hash translation   Aneesh Kumar K.V
  • [PATCH v2 01/28] powerpc/book3s64/pkeys: Enable MMU_FTR_PKEY   Aneesh Kumar K.V
  • [PATCH v2 02/28] powerpc/book3s64/kuep: Add MMU_FTR_KUEP   Aneesh Kumar K.V
  • [PATCH v2 03/28] powerpc/book3s64/pkeys: Use execute_pkey_disable static key   Aneesh Kumar K.V
  • [PATCH v2 04/28] powerpc/book3s64/pkeys: Use MMU_FTR_PKEY instead of pkey_disabled static key   Aneesh Kumar K.V
  • [PATCH v2 05/28] powerpc/book3s64/kuap: Move KUAP related function outside radix   Aneesh Kumar K.V
  • [PATCH v2 06/28] powerpc/book3s64/kuep: Move KUEP related function outside radix   Aneesh Kumar K.V
  • [PATCH v2 07/28] powerpc/book3s64/kuap: Rename MMU_FTR_RADIX_KUAP to MMU_FTR_KUAP   Aneesh Kumar K.V
  • [PATCH v2 08/28] powerpc/book3s64/kuap/kuep: Make KUAP and KUEP a subfeature of PPC_MEM_KEYS   Aneesh Kumar K.V
  • [PATCH v2 09/28] powerpc/book3s64/kuap: Move UAMOR setup to key init function   Aneesh Kumar K.V
  • [PATCH v2 10/28] powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation   Aneesh Kumar K.V
  • [PATCH v2 11/28] powerpc/exec: Set thread.regs early during exec   Aneesh Kumar K.V
  • [PATCH v2 12/28] powerpc/book3s64/pkeys: Store/restore userspace AMR correctly on entry and exit from kernel   Aneesh Kumar K.V
  • [PATCH v2 13/28] powerpc/book3s64/kuep: Store/restore userspace IAMR correctly on entry and exit from kernel   Aneesh Kumar K.V
  • [PATCH v2 14/28] powerpc/book3s64/pkeys: Inherit correctly on fork.   Aneesh Kumar K.V
  • [PATCH v2 15/28] powerpc/book3s64/pkeys: Reset userspace AMR correctly on exec   Aneesh Kumar K.V
    • [PATCH v2 15/28] powerpc/book3s64/pkeys: Reset userspace AMR correctly on exec   Aneesh Kumar K.V
  • [PATCH v2 16/28] powerpc/ptrace-view: Use pt_regs values instead of thread_struct based one.   Aneesh Kumar K.V
  • [PATCH v2 17/28] powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode.   Aneesh Kumar K.V
  • [PATCH v2 18/28] powerpc/book3s64/kuap: Restrict access to userspace based on userspace AMR   Aneesh Kumar K.V
  • [PATCH v2 19/28] powerpc/book3s64/kuap: Improve error reporting with KUAP   Aneesh Kumar K.V
  • [PATCH v2 20/28] powerpc/book3s64/kuap: Use Key 3 to implement KUAP with hash translation.   Aneesh Kumar K.V
  • [PATCH v2 21/28] powerpc/book3s64/kuep: Use Key 3 to implement KUEP with hash translation.   Aneesh Kumar K.V
  • [PATCH v2 22/28] powerpc/book3s64/hash/kuap: Enable kuap on hash   Aneesh Kumar K.V
  • [PATCH v2 23/28] powerpc/book3s64/hash/kuep: Enable KUEP on hash   Aneesh Kumar K.V
  • [PATCH v2 24/28] powerpc/book3s64/keys: Print information during boot.   Aneesh Kumar K.V
  • [PATCH v2 25/28] powerpc/selftest/ptrave-pkey: Rename variables to make it easier to follow code   Aneesh Kumar K.V
  • [PATCH v2 26/28] powerpc/selftest/ptrace-pkey: Update the test to mark an invalid pkey correctly   Aneesh Kumar K.V
  • [PATCH v2 27/28] powerpc/selftest/ptrace-pkey: IAMR and uamor cannot be updated by ptrace   Aneesh Kumar K.V
  • [PATCH v2 28/28] powerpc/book3s64/keys/kuap: Reset AMR/IAMR values on kexec   Aneesh Kumar K.V
• [powerpc:topic/uaccess] BUILD SUCCESS b44f687386875b714dae2afa768e73401e45c21c   kbuild test robot
• [RFC 1/3] powernv/cpuidle : Support for pre-entry and post exit of stop state in firmware   Nicholas Piggin
• [PATCH] powerpc/powernv: Fix a warning message   Christophe JAILLET
  • [PATCH] powerpc/powernv: Fix a warning message   Gautham R Shenoy
• [powerpc:next-test] BUILD SUCCESS 64c245a2974a376bb02dd94d1d03719d3a167e86   kbuild test robot
• [PATCH] powerpc/5200: update contact email   Wolfram Sang
  • [PATCH] powerpc/5200: update contact email   Michael Ellerman
    • [PATCH] powerpc/5200: update contact email   Wolfram Sang
      • [PATCH] powerpc/5200: update contact email   Michael Ellerman
  • [PATCH] powerpc/5200: update contact email   Michael Ellerman
• [PATCH] powerpc/64s: Fix unrecoverable SLB crashes due to preemption check   Michael Ellerman
  • [PATCH] powerpc/64s: Fix unrecoverable SLB crashes due to preemption check   Hugh Dickins
    • [PATCH] powerpc/64s: Fix unrecoverable SLB crashes due to preemption check   Michael Ellerman
  • [PATCH] powerpc/64s: Fix unrecoverable SLB crashes due to preemption check   Michael Ellerman
• [PATCH 0/7] sha1 library cleanup   Eric Biggers
  • [PATCH 0/7] sha1 library cleanup   Jason A. Donenfeld
    • [PATCH 0/7] sha1 library cleanup   Eric Biggers
  • [PATCH 0/7] sha1 library cleanup   Ard Biesheuvel
  • [PATCH 0/7] sha1 library cleanup   Herbert Xu
• [PATCH 2/7] crypto: powerpc/sha1 - remove unused temporary workspace   Eric Biggers
  • [PATCH 2/7] crypto: powerpc/sha1 - remove unused temporary workspace   Michael Ellerman
• [PATCH 3/7] crypto: powerpc/sha1 - prefix the "sha1_" functions   Eric Biggers
• [PATCH 1/2] powerpc/64s/hash: add torture_slb kernel boot option to increase SLB faults   Nicholas Piggin
  • [PATCH 2/2] powerpc/64s/hash: add torture_hpt kernel boot option to increase hash faults   Nicholas Piggin
    • [PATCH 2/2] powerpc/64s/hash: add torture_hpt kernel boot option to increase hash faults   Aneesh Kumar K.V
      • [PATCH 2/2] powerpc/64s/hash: add torture_hpt kernel boot option to increase hash faults   Nicholas Piggin
  • [PATCH 1/2] powerpc/64s/hash: add torture_slb kernel boot option to increase SLB faults   Aneesh Kumar K.V
    • [PATCH 1/2] powerpc/64s/hash: add torture_slb kernel boot option to increase SLB faults   Nicholas Piggin
• [PATCH v2 17/20] mm: free_area_init: allow defining max_zone_pfn in descending order   Guenter Roeck
  • [PATCH v2 17/20] mm: free_area_init: allow defining max_zone_pfn in descending order   Guenter Roeck
    • [PATCH v2 17/20] mm: free_area_init: allow defining max_zone_pfn in descending order   Mike Rapoport
      • [PATCH v2 17/20] mm: free_area_init: allow defining max_zone_pfn in descending order   Guenter Roeck
      • [PATCH v2 17/20] mm: free_area_init: allow defining max_zone_pfn in descending order   Mike Rapoport
      • [PATCH v2 17/20] mm: free_area_init: allow defining max_zone_pfn in descending order   Vineet Gupta
• [PATCH V2 00/11] Subject: Remove duplicated kmap code   ira.weiny at intel.com
  • [PATCH V2 01/11] arch/kmap: Remove BUG_ON()   ira.weiny at intel.com
  • [PATCH V2 02/11] arch/xtensa: Move kmap build bug out of the way   ira.weiny at intel.com
  • [PATCH V2 05/11] {x86,powerpc,microblaze}/kmap: Move preempt disable   ira.weiny at intel.com
    • [PATCH V2 05/11] {x86,powerpc,microblaze}/kmap: Move preempt disable   Christoph Hellwig
      • [PATCH V2 05/11] {x86,powerpc,microblaze}/kmap: Move preempt disable   Ira Weiny
  • [PATCH V2 07/11] arch/kunmap_atomic: Consolidate duplicate code   ira.weiny at intel.com
    • [PATCH V2 07/11] arch/kunmap_atomic: Consolidate duplicate code   Christoph Hellwig
  • [PATCH V2 09/11] arch/kmap: Don't hard code kmap_prot values   ira.weiny at intel.com
  • [PATCH V2 00/11] Subject: Remove duplicated kmap code   Al Viro
    • [PATCH V2 00/11] Subject: Remove duplicated kmap code   Ira Weiny
      • [PATCH V2 00/11] Subject: Remove duplicated kmap code   Al Viro
      • [PATCH V2 00/11] Subject: Remove duplicated kmap code   Ira Weiny
      • [PATCH V2 00/11] Subject: Remove duplicated kmap code   Al Viro
      • [PATCH V2 00/11] Subject: Remove duplicated kmap code   Ira Weiny
• [PATCH V2 03/11] arch/kmap: Remove redundant arch specific kmaps   ira.weiny at intel.com
• [PATCH V2 04/11] arch/kunmap: Remove duplicate kunmap implementations   ira.weiny at intel.com
• [PATCH V2 06/11] arch/kmap_atomic: Consolidate duplicate code   ira.weiny at intel.com
  • [PATCH V2 06/11] arch/kmap_atomic: Consolidate duplicate code   Christoph Hellwig
• [PATCH V2 08/11] arch/kmap: Ensure kmap_prot visibility   ira.weiny at intel.com
  • [PATCH V2 08/11] arch/kmap: Ensure kmap_prot visibility   Christoph Hellwig
    • [PATCH V2 08/11] arch/kmap: Ensure kmap_prot visibility   Ira Weiny
  • [PATCH V2 08/11] arch/kmap: Ensure kmap_prot visibility   Christoph Hellwig
• [PATCH V2 10/11] arch/kmap: Define kmap_atomic_prot() for all arch's   ira.weiny at intel.com
  • [PATCH V2 10/11] arch/kmap: Define kmap_atomic_prot() for all arch's   Christoph Hellwig
• [PATCH V2 11/11] drm: Remove drm specific kmap_atomic code   ira.weiny at intel.com
  • [PATCH V2 11/11] drm: Remove drm specific kmap_atomic code   Daniel Vetter
    • [PATCH V2 11/11] drm: Remove drm specific kmap_atomic code   Ira Weiny
• [PATCH V18 0/2] mm/debug: Add tests validating architecture page table helpers   Anshuman Khandual
  • [PATCH V18 2/2] mm/debug: Add tests validating architecture page table helpers   Anshuman Khandual
• [PATCH] powerpc/mce: Add MCE notification chain   Ganesh
• Build regressions/improvements in v5.7-rc4   Geert Uytterhoeven
• [PATCH v6 1/4] powerpc: Document details on H_SCM_HEALTH hcall   Vaibhav Jain
• [PATCH v2 1/2] powerpc/64s/hash: add torture_slb kernel boot option to increase SLB faults   Nicholas Piggin
  • [PATCH v2 2/2] powerpc/64s/hash: add torture_hpt kernel boot option to increase hash faults   Nicholas Piggin
  • [PATCH v2 1/2] powerpc/64s/hash: add torture_slb kernel boot option to increase SLB faults   kbuild test robot
• [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Michal Hocko
  • [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Srikar Dronamraju
    • [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   David Hildenbrand
      • [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   David Hildenbrand
      • [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Srikar Dronamraju
      • [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   David Hildenbrand
      • [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Srikar Dronamraju
• [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Emanuele Giuseppe Esposito
  • [PATCH v2 3/5] kunit: tests for stats_fs API   Emanuele Giuseppe Esposito
  • [PATCH v2 4/5] stats_fs fs: virtual fs to show stats to the end-user   Emanuele Giuseppe Esposito
  • [PATCH v2 5/5] kvm_main: replace debugfs with stats_fs   Emanuele Giuseppe Esposito
  • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   David Rientjes
    • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Emanuele Giuseppe Esposito
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Jim Mattson
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Paolo Bonzini
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   David Rientjes
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Paolo Bonzini
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Christian Borntraeger
  • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Paolo Bonzini
    • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Emanuele Giuseppe Esposito
    • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Jonathan Adams
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Paolo Bonzini
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Jonathan Adams
      • [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics   Paolo Bonzini
• [PATCH v2 1/5] refcount, kref: add dec-and-test wrappers for rw_semaphores   Emanuele Giuseppe Esposito
• [PATCH v2 2/5] stats_fs API: create, add and remove stats_fs sources and values   Emanuele Giuseppe Esposito
  • [PATCH v2 2/5] stats_fs API: create, add and remove stats_fs sources and values   Randy Dunlap
• [PATCH] powerpc/64s/radix: Don't prefetch DAR in update_mmu_cache   Nicholas Piggin
• [PATCH 1/2] powerpc/spufs: fix copy_to_user while atomic   Christoph Hellwig
  • [PATCH 1/2] powerpc/spufs: fix copy_to_user while atomic   Michael Ellerman
    • [PATCH 1/2] powerpc/spufs: fix copy_to_user while atomic   Christoph Hellwig
• [PATCH] powerpc/64/signal: balance return predictor stack in signal trampoline   Nicholas Piggin
• [powerpc:merge] BUILD SUCCESS 1bc92fe3175eb26ff37e580c0383d7a9abe06835   kbuild test robot
• [PATCH v2] misc: new driver sram_uapi for user level SRAM access   kbuild test robot
• [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass   Prakhar Srivastava
  • [RFC][PATCH 2/2] Add support for ima buffer pass using reserved memory arm64   Prakhar Srivastava
  • [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass   Mark Rutland
    • [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass   Prakhar Srivastava
      • [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass   Rob Herring
      • [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass   Prakhar Srivastava
      • [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass   Thiago Jung Bauermann
• [RFC][PATCH 1/2] Add a layer of abstraction to use the memory reserved by device tree for ima buffer pass.   Prakhar Srivastava
  • [RFC][PATCH 1/2] Add a layer of abstraction to use the memory reserved by device tree for ima buffer pass.   Rob Herring
    • [RFC][PATCH 1/2] Add a layer of abstraction to use the memory reserved by device tree for ima buffer pass.   Prakhar Srivastava
• [powerpc:next] BUILD SUCCESS 140777a3d8dfdb3d3f20ea7707c0f1c0ce1b0aa5   kbuild test robot
• [PATCH 3/3] mm/hugetlb: Introduce HAVE_ARCH_CLEAR_HUGEPAGE_FLAGS   Anshuman Khandual
  • [PATCH 3/3] mm/hugetlb: Introduce HAVE_ARCH_CLEAR_HUGEPAGE_FLAGS   Andrew Morton
• [PATCH v4 0/7] clean up redundant 'kvm_run' parameters   Tianjia Zhang
• [PATCH 1/4] dma-mapping: move the remaining DMA API calls out of line   Alexey Kardashevskiy
  • [PATCH 1/4] dma-mapping: move the remaining DMA API calls out of line   Christoph Hellwig
    • [PATCH 1/4] dma-mapping: move the remaining DMA API calls out of line   Alexey Kardashevskiy
• [PATCH v2 2/2] clk: qoriq: add cpufreq platform device   Stephen Boyd
• [PATCH v7 5/5] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration   kajoljain
  • [PATCH v7 5/5] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration   Michael Ellerman
• [PATCH v4 00/22] Avoid IPI while updating page table entries.   Aneesh Kumar K.V
  • [PATCH v4 15/22] powerpc/kvm/book3s: use find_kvm_host_pte in pute_tce functions   Aneesh Kumar K.V
  • [PATCH v4 16/22] powerpc/kvm/book3s: Avoid using rmap to protect parallel page table update.   Aneesh Kumar K.V
  • [PATCH v4 17/22] powerpc/kvm/book3s: use find_kvm_host_pte in kvmppc_book3s_instantiate_page   Aneesh Kumar K.V
  • [PATCH v4 18/22] powerpc/kvm/book3s: Use find_kvm_host_pte in kvmppc_get_hpa   Aneesh Kumar K.V
  • [PATCH v4 19/22] powerpc/kvm/book3s: Use pte_present instead of opencoding _PAGE_PRESENT check   Aneesh Kumar K.V
  • [PATCH v4 20/22] powerpc/mm/book3s64: Avoid sending IPI on clearing PMD   Aneesh Kumar K.V
  • [PATCH v4 21/22] mm: change pmdp_huge_get_and_clear_full take vm_area_struct as arg   Aneesh Kumar K.V
  • [PATCH v4 22/22] powerpc/mm/book3s64: Fix MADV_DONTNEED and parallel page fault race   Aneesh Kumar K.V
• [PATCH v4 01/22] powerpc/pkeys: Avoid using lockless page table walk   Aneesh Kumar K.V
  • [PATCH v4 01/22] powerpc/pkeys: Avoid using lockless page table walk   Michael Ellerman
• [PATCH v4 02/22] powerpc/pkeys: Check vma before returning key fault error to the user   Aneesh Kumar K.V
• [PATCH v4 03/22] powerpc/mm/hash64: use _PAGE_PTE when checking for pte_present   Aneesh Kumar K.V
• [PATCH v4 04/22] powerpc/hash64: Restrict page table lookup using init_mm with __flush_hash_table_range   Aneesh Kumar K.V
• [PATCH v4 05/22] powerpc/book3s64/hash: Use the pte_t address from the caller   Aneesh Kumar K.V
• [PATCH v4 06/22] powerpc/mce: Don't reload pte val in addr_to_pfn   Aneesh Kumar K.V
• [PATCH v4 07/22] powerpc/perf/callchain: Use __get_user_pages_fast in read_user_stack_slow   Aneesh Kumar K.V
• [PATCH v4 08/22] powerpc/kvm/book3s: switch from raw_spin_*lock to arch_spin_lock.   Aneesh Kumar K.V
• [PATCH v4 09/22] powerpc/kvm/book3s: Add helper to walk partition scoped linux page table.   Aneesh Kumar K.V
  • [PATCH v4 09/22] powerpc/kvm/book3s: Add helper to walk partition scoped linux page table.   Paul Mackerras
    • [PATCH v4 09/22] powerpc/kvm/book3s: Add helper to walk partition scoped linux page table.   Aneesh Kumar K.V
      • [PATCH v4 09/22] powerpc/kvm/book3s: Add helper to walk partition scoped linux page table.   Paul Mackerras
• [PATCH v4 10/22] powerpc/kvm/nested: Add helper to walk nested shadow linux page table.   Aneesh Kumar K.V
• [PATCH v4 11/22] powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary table   Aneesh Kumar K.V
• [PATCH v4 12/22] powerpc/kvm/book3s: Add helper for host page table walk   Aneesh Kumar K.V
• [PATCH v4 13/22] powerpc/kvm/book3s: Use find_kvm_host_pte in page fault handler   Aneesh Kumar K.V
• [PATCH v4 14/22] powerpc/kvm/book3s: Use find_kvm_host_pte in h_enter   Aneesh Kumar K.V
• [PATCH v4 2/7] KVM: arm64: clean up redundant 'kvm_run' parameters   Marc Zyngier
  • [PATCH v4 2/7] KVM: arm64: clean up redundant 'kvm_run' parameters   Tianjia Zhang
• remove set_fs calls from the coredump code v6   Christoph Hellwig
  • [PATCH 4/7] signal: refactor copy_siginfo_to_user32   Christoph Hellwig
  • [PATCH 5/7] binfmt_elf: remove the set_fs in fill_siginfo_note   Christoph Hellwig
  • [PATCH 6/7] binfmt_elf: remove the set_fs(KERNEL_DS) in elf_core_dump   Christoph Hellwig
  • [PATCH 7/7] binfmt_elf_fdpic: remove the set_fs(KERNEL_DS) in elf_fdpic_core_dump   Christoph Hellwig
  • remove set_fs calls from the coredump code v6   Linus Torvalds
    • remove set_fs calls from the coredump code v6   Eric W. Biederman
      • remove set_fs calls from the coredump code v6   Christoph Hellwig
      • remove set_fs calls from the coredump code v6   Eric W. Biederman
  • remove set_fs calls from the coredump code v6   Al Viro
    • remove set_fs calls from the coredump code v6   Christoph Hellwig
      • remove set_fs calls from the coredump code v6   Al Viro
• [PATCH 1/7] powerpc/spufs: fix copy_to_user while atomic   Christoph Hellwig
• [PATCH 2/7] powerpc/spufs: stop using access_ok   Christoph Hellwig
• [PATCH 3/7] powerpc/spufs: simplify spufs core dumping   Christoph Hellwig
• [PATCH 2/2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Ravi Bangoria
  • [PATCH 2/2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Madhavan Srinivasan
    • [PATCH 2/2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Athira Rajeev
• [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Michael Ellerman
  • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Segher Boessenkool
    • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Michael Ellerman
      • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Segher Boessenkool
      • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Christophe Leroy
      • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Segher Boessenkool
  • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Christophe Leroy
  • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Segher Boessenkool
    • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Michael Ellerman
      • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Segher Boessenkool
  • [PATCH v4 1/2] powerpc/uaccess: Implement unsafe_put_user() using 'asm goto'   Michael Ellerman
• [PATCH v3 00/29] Convert files to ReST - part 2   Jonathan Corbet
• New powerpc vdso calling convention   Segher Boessenkool
• [RFC PATCH 2/2] powerpc/64s: system call support for scv/rfscv instructions   Segher Boessenkool
  • [RFC PATCH 2/2] powerpc/64s: system call support for scv/rfscv instructions   Nicholas Piggin
  • [RFC PATCH 2/2] powerpc/64s: system call support for scv/rfscv instructions   Matheus Castanho
• [PATCH v4 7/8] powerpc/vdso32: implement clock_getres entirely   Aurelien Jarno
• [PATCH] powerpc/xive: Enforce load-after-store ordering when StoreEOI is active   Alistair Popple
  • [PATCH] powerpc/xive: Enforce load-after-store ordering when StoreEOI is active   Cédric Le Goater
  • [PATCH] powerpc/xive: Enforce load-after-store ordering when StoreEOI is active   Michael Ellerman
• [PATCH -next] powerpc/kernel/sysfs: Use ARRAY_SIZE instead of calculating the array size   Samuel Zou
• [PATCH v5 1/5] powerpc: Move idle_loop_prolog()/epilog() functions to header file   Michael Ellerman
• [PATCH v3 1/2] powerpc/fadump: use static allocation for reserved memory ranges   Michael Ellerman
• [PATCH] powerpc/64: Have MPROFILE_KERNEL depend on FUNCTION_TRACER   Michael Ellerman
• [PATCH] powerpc/ps3: Move static keyword to the front of declaration   Michael Ellerman
• [PATCH v8 00/30] Initial Prefixed Instruction support   Jordan Niethe
  • [PATCH v8 01/30] powerpc/xmon: Remove store_inst() for patch_instruction()   Jordan Niethe
  • [PATCH v8 02/30] powerpc/xmon: Move breakpoint instructions to own array   Jordan Niethe
  • [PATCH v8 03/30] powerpc/xmon: Move breakpoints to text section   Jordan Niethe
  • [PATCH v8 04/30] powerpc/xmon: Use bitwise calculations in_breakpoint_table()   Jordan Niethe
  • [PATCH v8 05/30] powerpc: Change calling convention for create_branch() et. al.   Jordan Niethe
  • [PATCH v8 06/30] powerpc: Use a macro for creating instructions from u32s   Jordan Niethe
  • [PATCH v8 07/30] powerpc: Use an accessor for instructions   Jordan Niethe
  • [PATCH v8 08/30] powerpc: Use a function for getting the instruction op code   Jordan Niethe
    • [PATCH v8 08/30] powerpc: Use a function for getting the instruction op code   Jordan Niethe
      • [PATCH v8 08/30] powerpc: Use a function for getting the instruction op code   Michael Ellerman
      • [PATCH v8 08/30] powerpc: Use a function for getting the instruction op code   Jordan Niethe
  • [PATCH v8 09/30] powerpc: Use a function for byte swapping instructions   Jordan Niethe
  • [PATCH v8 10/30] powerpc: Introduce functions for instruction equality   Jordan Niethe
  • [PATCH v8 11/30] powerpc: Use a datatype for instructions   Jordan Niethe
    • [PATCH v8 11/30] powerpc: Use a datatype for instructions   Jordan Niethe
      • [PATCH v8 11/30] powerpc: Use a datatype for instructions   Christophe Leroy
      • [PATCH v8 11/30] powerpc: Use a datatype for instructions   Jordan Niethe
    • [PATCH v8 11/30] powerpc: Use a datatype for instructions   Jordan Niethe
    • [PATCH v8 11/30] powerpc: Use a datatype for instructions   Jordan Niethe
  • [PATCH v8 12/30] powerpc: Use a function for reading instructions   Jordan Niethe
    • [PATCH v8 12/30] powerpc: Use a function for reading instructions   Christophe Leroy
      • [PATCH v8 12/30] powerpc: Use a function for reading instructions   Jordan Niethe
      • [PATCH v8 12/30] powerpc: Use a function for reading instructions   Michael Ellerman
      • [PATCH v8 12/30] powerpc: Use a function for reading instructions   Christophe Leroy
      • [PATCH v8 12/30] powerpc: Use a function for reading instructions   Michael Ellerman
  • [PATCH v8 13/30] powerpc: Add a probe_user_read_inst() function   Jordan Niethe
    • [PATCH v8 13/30] powerpc: Add a probe_user_read_inst() function   Michael Ellerman
      • [PATCH v8 13/30] powerpc: Add a probe_user_read_inst() function   Jordan Niethe
    • [PATCH v8 13/30] powerpc: Add a probe_user_read_inst() function   Christophe Leroy
      • [PATCH v8 13/30] powerpc: Add a probe_user_read_inst() function   Jordan Niethe
  • [PATCH v8 14/30] powerpc: Add a probe_kernel_read_inst() function   Jordan Niethe
  • [PATCH v8 15/30] powerpc/kprobes: Use patch_instruction()   Jordan Niethe
  • [PATCH v8 16/30] powerpc: Define and use __get_user_instr{, inatomic}()   Jordan Niethe
    • [PATCH v8 16/30] powerpc: Define and use __get_user_instr{, inatomic}()   Michael Ellerman
      • [PATCH v8 16/30] powerpc: Define and use __get_user_instr{, inatomic}()   Jordan Niethe
      • [PATCH v8 16/30] powerpc: Define and use __get_user_instr{, inatomic}()   Jordan Niethe
  • [PATCH v8 17/30] powerpc: Introduce a function for reporting instruction length   Jordan Niethe
  • [PATCH v8 18/30] powerpc/xmon: Use a function for reading instructions   Jordan Niethe
  • [PATCH v8 19/30] powerpc/xmon: Move insertion of breakpoint for xol'ing   Jordan Niethe
  • [PATCH v8 20/30] powerpc: Make test_translate_branch() independent of instruction length   Jordan Niethe
  • [PATCH v8 21/30] powerpc: Enable Prefixed Instructions   Jordan Niethe
  • [PATCH v8 22/30] powerpc: Define new SRR1 bits for a future ISA version   Jordan Niethe
    • [PATCH v8 22/30] powerpc: Define new SRR1 bits for a future ISA version   Jordan Niethe
  • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Jordan Niethe
    • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Jordan Niethe
    • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Christophe Leroy
      • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Alistair Popple
      • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Jordan Niethe
      • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Christophe Leroy
      • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Jordan Niethe
      • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Michael Ellerman
      • [PATCH v8 23/30] powerpc: Add prefixed instructions to instruction data type   Jordan Niethe
    • [PATCH v8 22.5/30] powerpc/optprobes: Add register argument to patch_imm64_load_insns()   Michael Ellerman
  • [PATCH v8 24/30] powerpc: Test prefixed code patching   Jordan Niethe
    • [PATCH v8 24/30] powerpc: Test prefixed code patching   Jordan Niethe
  • [PATCH v8 25/30] powerpc: Test prefixed instructions in feature fixups   Jordan Niethe
    • [PATCH v8 25/30] powerpc: Test prefixed instructions in feature fixups   Jordan Niethe
  • [PATCH v8 26/30] powerpc/xmon: Don't allow breakpoints on suffixes   Jordan Niethe
  • [PATCH v8 27/30] powerpc/kprobes: Don't allow breakpoints on suffixes   Jordan Niethe
  • [PATCH v8 28/30] powerpc: Support prefixed instructions in alignment handler   Jordan Niethe
    • [PATCH v8 28/30] powerpc: Support prefixed instructions in alignment handler   Christophe Leroy
      • [PATCH v8 28/30] powerpc: Support prefixed instructions in alignment handler   Alistair Popple
      • [PATCH v8 28/30] powerpc: Support prefixed instructions in alignment handler   Christophe Leroy
  • [PATCH v8 29/30] powerpc sstep: Add support for prefixed load/stores   Jordan Niethe
    • [PATCH v8 29/30] powerpc sstep: Add support for prefixed load/stores   Christophe Leroy
      • [PATCH v8 29/30] powerpc sstep: Add support for prefixed load/stores   Alistair Popple
      • [PATCH v8 29/30] powerpc sstep: Add support for prefixed load/stores   Christophe Leroy
    • [PATCH v8 29/30] powerpc sstep: Add support for prefixed load/stores   Jordan Niethe
  • [PATCH v8 30/30] powerpc sstep: Add support for prefixed fixed-point arithmetic   Jordan Niethe
    • [PATCH v8 30/30] powerpc sstep: Add support for prefixed fixed-point arithmetic   Christophe Leroy
    • [PATCH v8 30/30] powerpc sstep: Add support for prefixed fixed-point arithmetic   Jordan Niethe
  • [PATCH v8 00/30] Initial Prefixed Instruction support   Christophe Leroy
    • [PATCH v8 00/30] Initial Prefixed Instruction support   Jordan Niethe
  • [PATCH v8 00/30] Initial Prefixed Instruction support   Michael Ellerman
• [PATCH v3 11/15] powerpc/64s: machine check interrupt update NMI accounting   Nicholas Piggin
• [PATCH V2 0/3] mm/hugetlb: Add some new generic fallbacks   Anshuman Khandual
  • [PATCH V2 2/3] mm/hugetlb: Define a generic fallback for is_hugepage_only_range()   Anshuman Khandual
  • [PATCH V2 3/3] mm/hugetlb: Define a generic fallback for arch_clear_hugepage_flags()   Anshuman Khandual
• [PATCH] powerpc/8xx: Update email address in MAINTAINERS   Christophe Leroy
  • [PATCH] powerpc/8xx: Update email address in MAINTAINERS   Michael Ellerman
• [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Greg KH
  • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
    • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Greg KH
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Greg KH
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Greg KH
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Jiri Slaby
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Greg KH
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Greg KH
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Greg KH
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   Jiri Slaby
      • [PATCH] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
• [PATCH v7 2/5] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details   kajoljain
• [PATCH v8 0/5] powerpc/hv-24x7: Expose chip/sockets info to add json file metric support for the hv_24x7 socket/chip level events   Kajol Jain
• [PATCH v8 1/5] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run   Kajol Jain
• [PATCH v8 2/5] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details   Kajol Jain
  • [PATCH v8 2/5] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details   Nathan Lynch
    • [PATCH v8 2/5] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details   kajoljain
• [PATCH v8 3/5] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show processor details   Kajol Jain
• [PATCH v8 4/5] Documentation/ABI: Add ABI documentation for chips and sockets   Kajol Jain
• [PATCH v8 5/5] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration   Kajol Jain
  • [PATCH v8 5/5] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration   kbuild test robot
  • [PATCH v8 5/5] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration   Nathan Lynch
    • [PATCH v8 5/5] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration   kajoljain
• [PATCH v4 1/2] powerpc/eeh: fix pseries_eeh_configure_bridge()   Nathan Lynch
• [PATCH 18/91] perf metricgroups: Enhance JSON/metric infrastructure to handle "?"   Arnaldo Carvalho de Melo
• [PATCH 19/91] perf tests expr: Added test for runtime param in metric expression   Arnaldo Carvalho de Melo
• [PATCH 20/91] perf tools: Enable Hz/hz prinitg for --metric-only option   Arnaldo Carvalho de Melo
• [PATCH 21/91] perf vendor events power9: Add hv_24x7 socket/chip level metric events   Arnaldo Carvalho de Melo
• [PATCH v2 00/45] Use hugepages to map kernel mem on 8xx   Christophe Leroy
  • [PATCH v2 01/45] powerpc/kasan: Fix error detection on memory allocation   Christophe Leroy
  • [PATCH v2 03/45] powerpc/kasan: Fix shadow pages allocation failure   Christophe Leroy
  • [PATCH v2 04/45] powerpc/kasan: Remove unnecessary page table locking   Christophe Leroy
  • [PATCH v2 07/45] powerpc/ptdump: Limit size of flags text to 1/2 chars on PPC32   Christophe Leroy
  • [PATCH v2 20/45] powerpc/mm: Standardise __ptep_test_and_clear_young() params between PPC32 and PPC64   Christophe Leroy
  • [PATCH v2 21/45] powerpc/mm: Standardise pte_update() prototype between PPC32 and PPC64   Christophe Leroy
  • [PATCH v2 22/45] powerpc/mm: Create a dedicated pte_update() for 8xx   Christophe Leroy
  • [PATCH v2 23/45] powerpc/mm: Reduce hugepd size for 8M hugepages on 8xx   Christophe Leroy
  • [PATCH v2 24/45] powerpc/8xx: Drop CONFIG_8xx_COPYBACK option   Christophe Leroy
  • [PATCH v2 25/45] powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.   Christophe Leroy
  • [PATCH v2 26/45] powerpc/8xx: Manage 512k huge pages as standard pages.   Christophe Leroy
  • [PATCH v2 27/45] powerpc/8xx: Only 8M pages are hugepte pages now   Christophe Leroy
  • [PATCH v2 28/45] powerpc/8xx: MM_SLICE is not needed anymore   Christophe Leroy
  • [PATCH v2 29/45] powerpc/8xx: Move PPC_PIN_TLB options into 8xx Kconfig   Christophe Leroy
  • [PATCH v2 30/45] powerpc/8xx: Add function to set pinned TLBs   Christophe Leroy
  • [PATCH v2 31/45] powerpc/8xx: Don't set IMMR map anymore at boot   Christophe Leroy
  • [PATCH v2 32/45] powerpc/8xx: Always pin TLBs at startup.   Christophe Leroy
  • [PATCH v2 33/45] powerpc/8xx: Drop special handling of Linear and IMMR mappings in I/D TLB handlers   Christophe Leroy
  • [PATCH v2 34/45] powerpc/8xx: Remove now unused TLB miss functions   Christophe Leroy
  • [PATCH v2 35/45] powerpc/8xx: Move DTLB perf handling closer.   Christophe Leroy
  • [PATCH v2 36/45] powerpc/mm: Don't be too strict with _etext alignment on PPC32   Christophe Leroy
  • [PATCH v2 37/45] powerpc/8xx: Refactor kernel address boundary comparison   Christophe Leroy
  • [PATCH v2 38/45] powerpc/8xx: Add a function to early map kernel via huge pages   Christophe Leroy
  • [PATCH v2 39/45] powerpc/8xx: Map IMMR with a huge page   Christophe Leroy
  • [PATCH v2 40/45] powerpc/8xx: Map linear memory with huge pages   Christophe Leroy
  • [PATCH v2 41/45] powerpc/8xx: Allow STRICT_KERNEL_RwX with pinned TLB   Christophe Leroy
  • [PATCH v2 42/45] powerpc/8xx: Allow large TLBs with DEBUG_PAGEALLOC   Christophe Leroy
  • [PATCH v2 43/45] powerpc/8xx: Implement dedicated kasan_init_region()   Christophe Leroy
  • [PATCH v2 44/45] powerpc/32s: Allow mapping with BATs with DEBUG_PAGEALLOC   Christophe Leroy
  • [PATCH v2 45/45] powerpc/32s: Implement dedicated kasan_init_region()   Christophe Leroy
• [PATCH v2 02/45] powerpc/kasan: Fix issues by lowering KASAN_SHADOW_END   Christophe Leroy
• [PATCH v2 05/45] powerpc/kasan: Refactor update of early shadow mappings   Christophe Leroy
• [PATCH v2 06/45] powerpc/kasan: Declare kasan_init_region() weak   Christophe Leroy
• [PATCH v2 08/45] powerpc/ptdump: Reorder flags   Christophe Leroy
• [PATCH v2 09/45] powerpc/ptdump: Add _PAGE_COHERENT flag   Christophe Leroy
• [PATCH v2 10/45] powerpc/ptdump: Display size of BATs   Christophe Leroy
• [PATCH v2 11/45] powerpc/ptdump: Standardise display of BAT flags   Christophe Leroy
• [PATCH v2 12/45] powerpc/ptdump: Properly handle non standard page size   Christophe Leroy
  • [PATCH v2 12/45] powerpc/ptdump: Properly handle non standard page size   kbuild test robot
• [PATCH v2 13/45] powerpc/ptdump: Handle hugepd at PGD level   Christophe Leroy
• [PATCH v2 14/45] powerpc/32s: Don't warn when mapping RO data ROX.   Christophe Leroy
• [PATCH v2 15/45] powerpc/mm: Allocate static page tables for fixmap   Christophe Leroy
• [PATCH v2 16/45] powerpc/mm: Fix conditions to perform MMU specific management by blocks on PPC32.   Christophe Leroy
• [PATCH v2 17/45] powerpc/mm: PTE_ATOMIC_UPDATES is only for 40x   Christophe Leroy
• [PATCH v2 18/45] powerpc/mm: Refactor pte_update() on nohash/32   Christophe Leroy
• [PATCH v2 19/45] powerpc/mm: Refactor pte_update() on book3s/32   Christophe Leroy
• [PATCH net 11/16] net: ethernet: marvell: mvneta: fix fixed-link phydev leaks   Naresh Kamboju
  • [PATCH net 11/16] net: ethernet: marvell: mvneta: fix fixed-link phydev leaks   Johan Hovold
    • [PATCH net 11/16] net: ethernet: marvell: mvneta: fix fixed-link phydev leaks   Greg Kroah-Hartman
      • [PATCH net 11/16] net: ethernet: marvell: mvneta: fix fixed-link phydev leaks   Greg Kroah-Hartman
      • [PATCH net 11/16] net: ethernet: marvell: mvneta: fix fixed-link phydev leaks   Naresh Kamboju
      • [PATCH net 11/16] net: ethernet: marvell: mvneta: fix fixed-link phydev leaks   Johan Hovold
      • [PATCH net 11/16] net: ethernet: marvell: mvneta: fix fixed-link phydev leaks   Greg Kroah-Hartman
• [PATCH -next] soc: fsl_asrc: Make some functions static   ChenTao
  • [PATCH -next] soc: fsl_asrc: Make some functions static   Mark Brown
• [PATCH -next] ALSA: sound/ppc: Use bitwise instead of arithmetic operator for flags   Samuel Zou
  • [PATCH -next] ALSA: sound/ppc: Use bitwise instead of arithmetic operator for flags   Takashi Iwai
• [PATCH v2 1/2] cpufreq: qoriq: convert to a platform driver   Viresh Kumar
• [PATCH] powerpc/spufs: Add rcu_read_lock() around fcheck()   Christoph Hellwig
• [PATCH v2 1/4] powerpc/64s: Always has full regs, so remove remnant checks   Michael Ellerman
  • [PATCH v2 2/4] powerpc: Use set_trap() and avoid open-coding trap masking   Michael Ellerman
  • [PATCH v2 3/4] powerpc: trap_is_syscall() helper to hide syscall trap number   Michael Ellerman
  • [PATCH v2 4/4] powerpc: Use trap metadata to prevent double restart rather than zeroing trap   Michael Ellerman
  • [PATCH v2 1/4] powerpc/64s: Always has full regs, so remove remnant checks   Michael Ellerman
• [PATCH v4 02/14] arm: add support for folded p4d page tables   Marek Szyprowski
  • [PATCH v4 02/14] arm: add support for folded p4d page tables   Mike Rapoport
    • [PATCH v4 02/14] arm: add support for folded p4d page tables   Marek Szyprowski
      • [PATCH v4 02/14] arm: add support for folded p4d page tables   Mike Rapoport
      • [PATCH v4 02/14] arm: add support for folded p4d page tables   Marek Szyprowski
      • [PATCH v4 02/14] arm: add support for folded p4d page tables   Mike Rapoport
• [PATCH] powerpc/uaccess: Don't use "m<>" constraint   Michael Ellerman
  • [PATCH] powerpc/uaccess: Don't use "m<>" constraint   Segher Boessenkool
  • [PATCH] powerpc/uaccess: Don't use "m<>" constraint   Michael Ellerman
• powerpc/pci: [PATCH 1/1]: PCIE PHB reset   wenxiong at linux.vnet.ibm.com
  • powerpc/pci: [PATCH 1/1]: PCIE PHB reset   Oliver O'Halloran
  • powerpc/pci: [PATCH 1/1]: PCIE PHB reset   Sam Bobroff
    • powerpc/pci: [PATCH 1/1]: PCIE PHB reset   wenxiong
  • powerpc/pci: [PATCH 1/1]: PCIE PHB reset   Sam Bobroff
• [PATCH 1/3] powerpc/va: Add a __va() variant that doesn't do input validation   Aneesh Kumar K.V
  • [PATCH 2/3] powerpc: Fix instruction dumping to use address value correctly   Aneesh Kumar K.V
  • [PATCH 3/3] powerp: Avoid opencoding fixup_real_addr   Aneesh Kumar K.V
  • [PATCH 1/3] powerpc/va: Add a __va() variant that doesn't do input validation   kbuild test robot
• [PATCH V3 00/15] Remove duplicated kmap code   ira.weiny at intel.com
  • [PATCH V3 02/15] arch/xtensa: Move kmap build bug out of the way   ira.weiny at intel.com
  • [PATCH V3 11/15] drm: Remove drm specific kmap_atomic code   ira.weiny at intel.com
  • [PATCH V3 12/15] kmap: Remove kmap_atomic_to_page()   ira.weiny at intel.com
  • [PATCH V3 13/15] parisc/kmap: Remove duplicate kmap code   ira.weiny at intel.com
    • [PATCH V3 13/15] parisc/kmap: Remove duplicate kmap code   Andrew Morton
      • [PATCH V3 13/15] parisc/kmap: Remove duplicate kmap code   Ira Weiny
  • [PATCH V3 14/15] sparc: Remove unnecessary includes   ira.weiny at intel.com
  • [PATCH V3 15/15] kmap: Consolidate kmap_prot definitions   ira.weiny at intel.com
    • [PATCH V3 15/15] kmap: Consolidate kmap_prot definitions   Andrew Morton
      • [PATCH V3 15/15] kmap: Consolidate kmap_prot definitions   Ira Weiny
    • [PATCH V3.1] kmap: Consolidate kmap_prot definitions   ira.weiny at intel.com
• [PATCH V3 01/15] arch/kmap: Remove BUG_ON()   ira.weiny at intel.com
• [PATCH V3 03/15] arch/kmap: Remove redundant arch specific kmaps   ira.weiny at intel.com
• [PATCH V3 04/15] arch/kunmap: Remove duplicate kunmap implementations   ira.weiny at intel.com
• [PATCH V3 05/15] {x86,powerpc,microblaze}/kmap: Move preempt disable   ira.weiny at intel.com
• [PATCH V3 06/15] arch/kmap_atomic: Consolidate duplicate code   ira.weiny at intel.com
• [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   ira.weiny at intel.com
  • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Guenter Roeck
    • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Ira Weiny
      • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Guenter Roeck
      • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Ira Weiny
      • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Ira Weiny
      • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Guenter Roeck
      • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Ira Weiny
      • [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code   Guenter Roeck
  • [PATCH] arch/{mips, sparc, microblaze, powerpc}: Don't enable pagefault/preempt twice   ira.weiny at intel.com
    • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Guenter Roeck
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Ira Weiny
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Guenter Roeck
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Ira Weiny
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Ira Weiny
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Guenter Roeck
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Ira Weiny
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Guenter Roeck
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Weiny, Ira
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Ira Weiny
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Al Viro
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Guenter Roeck
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Al Viro
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Al Viro
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Guenter Roeck
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Al Viro
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Al Viro
      • [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice   Guenter Roeck
• [PATCH V3 08/15] arch/kmap: Ensure kmap_prot visibility   ira.weiny at intel.com
• [PATCH V3 09/15] arch/kmap: Don't hard code kmap_prot values   ira.weiny at intel.com
• [PATCH V3 10/15] arch/kmap: Define kmap_atomic_prot() for all arch's   ira.weiny at intel.com
  • [PATCH V3 10/15] arch/kmap: Define kmap_atomic_prot() for all arch's   Guenter Roeck
    • [PATCH V3 10/15] arch/kmap: Define kmap_atomic_prot() for all arch's   Ira Weiny
• Fwd: [CRON] Broken: ClangBuiltLinux/continuous-integration#1432 (master - 0aceafc)   Nick Desaulniers
  • Fwd: [CRON] Broken: ClangBuiltLinux/continuous-integration#1432 (master - 0aceafc)   Michael Ellerman
    • Fwd: [CRON] Broken: ClangBuiltLinux/continuous-integration#1432 (master - 0aceafc)   Nick Desaulniers
      • Fwd: [CRON] Broken: ClangBuiltLinux/continuous-integration#1432 (master - 0aceafc)   Nathan Chancellor
      • Fwd: [CRON] Broken: ClangBuiltLinux/continuous-integration#1432 (master - 0aceafc)   Michael Ellerman
      • Fwd: [CRON] Broken: ClangBuiltLinux/continuous-integration#1432 (master - 0aceafc)   Nick Desaulniers
      • Fwd: [CRON] Broken: ClangBuiltLinux/continuous-integration#1432 (master - 0aceafc)   Nathan Chancellor
• [PATCH] treewide: Replace zero-length array with flexible-array   Gustavo A. R. Silva
  • [PATCH] treewide: Replace zero-length array with flexible-array   Li Yang
• [PATCH] powerpc: Replace zero-length array with flexible-array   Gustavo A. R. Silva
  • [PATCH] powerpc: Replace zero-length array with flexible-array   Michael Ellerman
• [PATCH] powerpc/mm: Replace zero-length array with flexible-array   Gustavo A. R. Silva
  • [PATCH] powerpc/mm: Replace zero-length array with flexible-array   Michael Ellerman
• [PATCH 1/5] powerpc/mpc85xx: Define ethernet port aliases in board dts file   Darren Stevens
• [PATCH 2/5] powerpc/mpc85xx: Activate Cyrus P5020 ethernet   Darren Stevens
• [PATCH 3/5] powerpc/mpc85xx: Add Cyrus Power-off and reset   Darren Stevens
• [PATCH 4/5] powerpc/mpc85xx: Add Cyrus HDD LED   Darren Stevens
  • [PATCH 4/5] powerpc/mpc85xx: Add Cyrus HDD LED   Scott Wood
• [PATCH 5/5] powerpc/mpc85xx: Add Cyrus P5040 device tree source   Darren Stevens
  • [PATCH 5/5] powerpc/mpc85xx: Add Cyrus P5040 device tree source   Scott Wood
    • powerpc/mpc85xx: Add Cyrus P5040 device tree source   Darren Stevens
      • powerpc/mpc85xx: Add Cyrus P5040 device tree source   Scott Wood
• [PATCH V3 0/3] mm/hugetlb: Add some new generic fallbacks   Anshuman Khandual
  • [PATCH V3 2/3] mm/hugetlb: Define a generic fallback for is_hugepage_only_range()   Anshuman Khandual
    • [PATCH V3 2/3] mm/hugetlb: Define a generic fallback for is_hugepage_only_range()   Mike Kravetz
      • [PATCH V3 2/3] mm/hugetlb: Define a generic fallback for is_hugepage_only_range()   Anshuman Khandual
      • [PATCH V3 2/3] mm/hugetlb: Define a generic fallback for is_hugepage_only_range()   Mike Kravetz
  • [PATCH V3 3/3] mm/hugetlb: Define a generic fallback for arch_clear_hugepage_flags()   Anshuman Khandual
    • [PATCH V3 3/3] mm/hugetlb: Define a generic fallback for arch_clear_hugepage_flags()   Mike Kravetz
• [PATCH v4 00/16] powerpc: machine check and system reset fixes   Nicholas Piggin
  • [PATCH v4 01/16] powerpc/64s/exception: Fix machine check no-loss idle wakeup   Nicholas Piggin
  • [PATCH v4 05/16] powerpc/pseries/ras: avoid calling rtas_token in NMI paths   Nicholas Piggin
  • [PATCH v4 06/16] powerpc/pseries/ras: FWNMI_VALID off by one   Nicholas Piggin
  • [PATCH v4 07/16] powerpc/pseries/ras: fwnmi avoid modifying r3 in error case   Nicholas Piggin
  • [PATCH v4 08/16] powerpc/pseries/ras: fwnmi sreset should not interlock   Nicholas Piggin
  • [PATCH v4 09/16] powerpc/pseries: limit machine check stack to 4GB   Nicholas Piggin
  • [PATCH v4 10/16] powerpc/pseries: machine check use rtas_call_unlocked with args on stack   Nicholas Piggin
  • [PATCH v4 11/16] powerpc/64s: machine check interrupt update NMI accounting   Nicholas Piggin
    • [PATCH v4 11/16] powerpc/64s: machine check interrupt update NMI accounting   kbuild test robot
      • [PATCH v4 11/16] powerpc/64s: machine check interrupt update NMI accounting   Nicholas Piggin
      • [PATCH v4 11/16] powerpc/64s: machine check interrupt update NMI accounting   Michael Ellerman
  • [PATCH v4 12/16] powerpc: implement ftrace_enabled helper   Nicholas Piggin
  • [PATCH v4 13/16] powerpc/64s: machine check do not trace real-mode handler   Nicholas Piggin
  • [PATCH v4 14/16] powerpc/traps: system reset do not trace   Nicholas Piggin
  • [PATCH v4 15/16] powerpc/traps: make unrecoverable NMIs die instead of panic   Nicholas Piggin
  • [PATCH v4 16/16] powerpc/traps: Machine check fix RI=0 recoverability check   Nicholas Piggin
  • [PATCH v4 00/16] powerpc: machine check and system reset fixes   Michael Ellerman
• [PATCH v4 02/16] powerpc/64s/exceptions: Fix in_mce accounting in unrecoverable path   Nicholas Piggin
• [PATCH v4 03/16] powerpc/64s/exceptions: Change irq reconcile for NMIs from reusing _DAR to RESULT   Nicholas Piggin
• [PATCH v4 04/16] powerpc/64s/exceptions: machine check reconcile irq state   Nicholas Piggin
  • [PATCH v4 04/16] powerpc/64s/exceptions: machine check reconcile irq state   Michael Ellerman
    • [PATCH v4 04/16] powerpc/64s/exceptions: machine check reconcile irq state   Nicholas Piggin
• [PATCH 1/3] rtc: ds1374: add uie_unsupported property to drop warning   Biwen Li
  • [PATCH 2/3] dts: ppc: t4240rdb: add uie_unsupported property to drop warning   Biwen Li
    • [PATCH 2/3] dts: ppc: t4240rdb: add uie_unsupported property to drop warning   Alexandre Belloni
    • [PATCH 2/3] dts: ppc: t4240rdb: add uie_unsupported property to drop warning   Biwen Li (OSS)
  • [PATCH 3/3] dts: ppc: t1024rdb: add wakeup-source property to drop warning   Biwen Li
  • [PATCH 1/3] rtc: ds1374: add uie_unsupported property to drop warning   Alexandre Belloni
  • [PATCH 1/3] rtc: ds1374: add uie_unsupported property to drop warning   Biwen Li (OSS)
• [PATCH] powerpc/spufs: adjust list element pointer type   Julia Lawall
  • [PATCH] powerpc/spufs: adjust list element pointer type   Jeremy Kerr
    • [PATCH] powerpc/spufs: adjust list element pointer type   Julia Lawall
• [PATCH v7 0/5] powerpc/papr_scm: Add support for reporting nvdimm health   Vaibhav Jain
  • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Vaibhav Jain
    • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Borislav Petkov
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Vaibhav Jain
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Joe Perches
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Vaibhav Jain
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Borislav Petkov
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Steven Rostedt
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Vaibhav Jain
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Michael Ellerman
      • [PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Vaibhav Jain
  • [PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Vaibhav Jain
  • [PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
  • [PATCH v7 5/5] powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_HEALTH   Vaibhav Jain
• [PATCH v7 1/5] powerpc: Document details on H_SCM_HEALTH hcall   Vaibhav Jain
• [tip: perf/core] perf vendor events power9: Add hv_24x7 socket/chip level metric events   tip-bot2 for Kajol Jain
• [tip: perf/core] perf tools: Enable Hz/hz prinitg for --metric-only option   tip-bot2 for Kajol Jain
• [tip: perf/core] perf tests expr: Added test for runtime param in metric expression   tip-bot2 for Kajol Jain
• [tip: perf/core] perf metricgroups: Enhance JSON/metric infrastructure to handle "?"   tip-bot2 for Kajol Jain
• [PATCH v2] powerpc/spufs: Rework fcheck() usage   Michael Ellerman
• [PATCH -next] soc: fsl: qbman: Remove unused inline function qm_eqcr_get_ci_stashing   YueHaibing
  • [PATCH -next] soc: fsl: qbman: Remove unused inline function qm_eqcr_get_ci_stashing   Li Yang
• [PATCH -next] soc: fsl: dpio: Remove unused inline function qbman_write_eqcr_am_rt_register   YueHaibing
  • [PATCH -next] soc: fsl: dpio: Remove unused inline function qbman_write_eqcr_am_rt_register   Li Yang
• [PATCH -next] soc: fsl: dpio: remove set but not used variable 'addr_cena'   YueHaibing
  • [PATCH -next] soc: fsl: dpio: remove set but not used variable 'addr_cena'   Yuehaibing
• ioremap() called early from pnv_pci_init_ioda_phb()   Qian Cai
  • ioremap() called early from pnv_pci_init_ioda_phb()   Qian Cai
    • ioremap() called early from pnv_pci_init_ioda_phb()   Nicholas Piggin
      • ioremap() called early from pnv_pci_init_ioda_phb()   Qian Cai
    • ioremap() called early from pnv_pci_init_ioda_phb()   Christophe Leroy
      • ioremap() called early from pnv_pci_init_ioda_phb()   Oliver O'Halloran
  • ioremap() called early from pnv_pci_init_ioda_phb()   Oliver O'Halloran
    • ioremap() called early from pnv_pci_init_ioda_phb()   Nicholas Piggin
• remove a few uses of ->queuedata   Christoph Hellwig
  • [PATCH 01/15] nfblock: use gendisk private_data   Christoph Hellwig
    • [PATCH 01/15] nfblock: use gendisk private_data   Geert Uytterhoeven
  • [PATCH 02/15] simdisk: stop using ->queuedata   Christoph Hellwig
  • [PATCH 03/15] drbd: stop using ->queuedata   Christoph Hellwig
  • [PATCH 04/15] null_blk: stop using ->queuedata for bio mode   Christoph Hellwig
  • [PATCH 05/15] ps3vram: stop using ->queuedata   Christoph Hellwig
  • [PATCH 06/15] rsxx: stop using ->queuedata   Christoph Hellwig
  • [PATCH 07/15] umem: stop using ->queuedata   Christoph Hellwig
  • [PATCH 08/15] zram: stop using ->queuedata   Christoph Hellwig
  • [PATCH 09/15] lightnvm: stop using ->queuedata   Christoph Hellwig
    • [PATCH 09/15, fіxed] lightnvm: stop using ->queuedata   Christoph Hellwig
  • [PATCH 10/15] bcache: stop setting ->queuedata   Christoph Hellwig
  • [PATCH 11/15] dm: stop using ->queuedata   Christoph Hellwig
  • [PATCH 12/15] md: stop using ->queuedata   Christoph Hellwig
    • [PATCH 12/15] md: stop using ->queuedata   Song Liu
    • [PATCH 12/15] md: stop using ->queuedata   Christoph Hellwig
      • [PATCH 12/15] md: stop using ->queuedata   Song Liu
  • [PATCH 13/15] nvdimm/blk: stop using ->queuedata   Christoph Hellwig
  • [PATCH 14/15] nvdimm/btt: stop using ->queuedata   Christoph Hellwig
  • [PATCH 15/15] nvdimm/pmem: stop using ->queuedata   Christoph Hellwig
  • remove a few uses of ->queuedata   Dan Williams
    • remove a few uses of ->queuedata   Christoph Hellwig
      • remove a few uses of ->queuedata   Dan Williams
      • remove a few uses of ->queuedata   Christoph Hellwig
      • remove a few uses of ->queuedata   Dan Williams
  • remove a few uses of ->queuedata   Ming Lei
    • remove a few uses of ->queuedata   Christoph Hellwig
• [PATCH] selftests: powerpc: Add test for execute-disabled pkeys   Sandipan Das
  • [PATCH] selftests: powerpc: Add test for execute-disabled pkeys   Michael Ellerman
    • [PATCH] selftests: powerpc: Add test for execute-disabled pkeys   Sandipan Das
      • [PATCH] selftests: powerpc: Add test for execute-disabled pkeys   Michael Ellerman
• [PATCH 0/2] selftests: vm: pkeys: Some powerpc fixes   Sandipan Das
  • [PATCH 1/2] selftests: vm: pkeys: Fix powerpc access right definitions   Sandipan Das
  • [PATCH 2/2] selftests: vm: pkeys: Fix powerpc access right updates   Sandipan Das
    • [PATCH 2/2] selftests: vm: pkeys: Fix powerpc access right updates   Florian Weimer
      • [PATCH 2/2] selftests: vm: pkeys: Fix powerpc access right updates   Sandipan Das
      • [PATCH 2/2] selftests: vm: pkeys: Fix powerpc access right updates   Florian Weimer
• [PATCH] powerpc/kvm: silence kmemleak false positives   Qian Cai
  • [PATCH] powerpc/kvm: silence kmemleak false positives   Michael Ellerman
    • [PATCH] powerpc/kvm: silence kmemleak false positives   Catalin Marinas
      • [PATCH] powerpc/kvm: silence kmemleak false positives   Michael Ellerman
    • [PATCH] powerpc/kvm: silence kmemleak false positives   Qian Cai
      • [PATCH] powerpc/kvm: silence kmemleak false positives   Catalin Marinas
  • [PATCH] powerpc/kvm: silence kmemleak false positives   Michael Ellerman
    • [PATCH] powerpc/kvm: silence kmemleak false positives   Qian Cai
• [PATCH -next] powerpc/powernv: add NULL check after kzalloc   Chen Zhou
• [PATCH RFC 0/4] Add support for Microwatt-based SoCs   Paul Mackerras
  • [PATCH RFC 2/4] powerpc: Add Microwatt platform   Paul Mackerras
    • [PATCH RFC 2/4] powerpc: Add Microwatt platform   Nicholas Piggin
      • [PATCH RFC 2/4] powerpc: Add Microwatt platform   Alistair Popple
      • [PATCH RFC 2/4] powerpc: Add Microwatt platform   benh at ozlabs.org
      • [PATCH RFC 2/4] powerpc: Add Microwatt platform   Nicholas Piggin
    • [PATCH RFC 2/4] powerpc: Add Microwatt platform   Michael Ellerman
• [PATCH RFC 1/4] powerpc/radix: Fix compilation for radix with CONFIG_SMP=n   Paul Mackerras
  • [PATCH RFC 1/4] powerpc/radix: Fix compilation for radix with CONFIG_SMP=n   Nicholas Piggin
    • [PATCH RFC 1/4] powerpc/radix: Fix compilation for radix with CONFIG_SMP=n   Joel Stanley
• [PATCH RFC 3/4] powerpc/microwatt: Add early debug UART support for Microwatt   Paul Mackerras
  • [PATCH RFC 3/4] powerpc/microwatt: Add early debug UART support for Microwatt   Segher Boessenkool
  • [PATCH RFC 3/4] powerpc/microwatt: Add early debug UART support for Microwatt   Michael Ellerman
• [PATCH RFC 4/4] powerpc/radix: Add support for microwatt's PRTBL SPR   Paul Mackerras
  • [PATCH RFC 4/4] powerpc/radix: Add support for microwatt's PRTBL SPR   Nicholas Piggin
• [PATCH fixes] powerpc/vdso32: Fallback on getres syscall when clock is unknown   Christophe Leroy
  • [PATCH fixes] powerpc/vdso32: Fallback on getres syscall when clock is unknown   Aurelien Jarno
  • [PATCH fixes] powerpc/vdso32: Fallback on getres syscall when clock is unknown   Michael Ellerman
• [PATCH v3] powerpc/64s/pgtable: fix an undefined behaviour   Qian Cai
• [PATCH v8 8/8] powerpc/vdso: Provide __kernel_clock_gettime64() on vdso32   Christophe Leroy
  • [PATCH v8 8/8] powerpc/vdso: Provide __kernel_clock_gettime64() on vdso32   Christophe Leroy
• [PATCH vdsotest] Add support for clock_gettime64() on powerpc32   Christophe Leroy
  • [PATCH vdsotest] Add support for clock_gettime64() on powerpc32   Christophe Leroy
• [PATCH fixes] powerpc/40x: Make more space for system call exception   Christophe Leroy
  • [PATCH fixes] powerpc/40x: Make more space for system call exception   Michael Ellerman
• [PATCH v2 4/9] drivers/ps3: Remove duplicate error messages   Geoff Levand
  • [PATCH v2 4/9] drivers/ps3: Remove duplicate error messages   Markus Elfring
• [PATCH v2 3/9] powerpc/head_check: Avoid broken pipe   Geoff Levand
• [PATCH v2 2/9] powerpc/wrapper: Output linker map file   Geoff Levand
• [PATCH v2 1/9] powerpc/head_check: Automatic verbosity   Geoff Levand
• [PATCH v2 0/9] powerpc + ps3 patches   Geoff Levand
  • [PATCH v2 7/9] powerpc/ps3: Add check for otheros image size   Geoff Levand
    • [PATCH v2 7/9] powerpc/ps3: Add check for otheros image size   Michael Ellerman
      • [PATCH v2 7/9] powerpc/ps3: Add check for otheros image size   Geoff Levand
      • [PATCH v2 7/9] powerpc/ps3: Add check for otheros image size   Michael Ellerman
    • [PATCH v3 7/9] powerpc/ps3: Add check for otheros image size   Geoff Levand
  • [PATCH v2 0/9] powerpc + ps3 patches   Michael Ellerman
• [PATCH v2 5/9] net/ps3_gelic_net: Remove duplicate error message   Geoff Levand
  • [PATCH v2 5/9] net/ps3_gelic_net: Remove duplicate error message   Markus Elfring
• [PATCH v2 6/9] ps3disk: use the default segment boundary   Geoff Levand
• [PATCH v2 8/9] powerpc/ps3: Fix kexec shutdown hang   Geoff Levand
• [PATCH v2 9/9] hvc_console: Allow backends to set I/O buffer size   Geoff Levand
  • [PATCH v2 9/9] hvc_console: Allow backends to set I/O buffer size   Markus Elfring
  • [PATCH v3 9/9] hvc_console: Allow backends to set I/O buffer size   Geoff Levand
• [Bug 207359] MegaRAID SAS 9361 controller hang/reset   bugzilla-daemon at bugzilla.kernel.org
• [PATCH] powerpc/powernv/pci: fix a RCU-list lock   Qian Cai
• [PATCH] powerpc/mm/book3s64/iommu: fix some RCU-list locks   Qian Cai
• [PATCH] powerpc/kvm/book3s64/vio: fix some RCU-list locks   Qian Cai
  • [PATCH] powerpc/kvm/book3s64/vio: fix some RCU-list locks   Paul Mackerras
    • [PATCH] powerpc/kvm/book3s64/vio: fix some RCU-list locks   Qian Cai
  • [PATCH] powerpc/kvm/book3s64/vio: fix some RCU-list locks   Paul Mackerras
• sort out the flush_icache_range mess   Christoph Hellwig
  • [PATCH 01/31] arm: fix the flush_icache_range arguments in set_fiq_handler   Christoph Hellwig
  • [PATCH 02/31] arm64: fix the flush_icache_range arguments in machine_kexec   Christoph Hellwig
    • [PATCH 02/31] arm64: fix the flush_icache_range arguments in machine_kexec   Will Deacon
      • [PATCH 02/31] arm64: fix the flush_icache_range arguments in machine_kexec   Catalin Marinas
      • [PATCH 02/31] arm64: fix the flush_icache_range arguments in machine_kexec   Christoph Hellwig
  • [PATCH 03/31] MIPS: unexport __flush_icache_user_range   Christoph Hellwig
    • [PATCH 03/31] MIPS: unexport __flush_icache_user_range   Thomas Bogendoerfer
  • [PATCH 04/31] nds32: unexport flush_icache_page   Christoph Hellwig
  • [PATCH 05/31] powerpc: unexport flush_icache_user_range   Christoph Hellwig
  • [PATCH 06/31] unicore32: remove flush_cache_user_range   Christoph Hellwig
  • [PATCH 07/31] asm-generic: fix the inclusion guards for cacheflush.h   Christoph Hellwig
  • [PATCH 08/31] asm-generic: don't include <linux/mm.h> in cacheflush.h   Christoph Hellwig
  • [PATCH 09/31] asm-generic: improve the flush_dcache_page stub   Christoph Hellwig
  • [PATCH 10/31] alpha: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 11/31] arm64: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 12/31] c6x: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 13/31] hexagon: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 14/31] ia64: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 15/31] microblaze: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 16/31] m68knommu: use asm-generic/cacheflush.h   Christoph Hellwig
    • [PATCH 16/31] m68knommu: use asm-generic/cacheflush.h   Greg Ungerer
  • [PATCH 17/31] openrisc: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 18/31] powerpc: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 19/31] riscv: use asm-generic/cacheflush.h   Christoph Hellwig
    • [PATCH 19/31] riscv: use asm-generic/cacheflush.h   Palmer Dabbelt
      • [PATCH 19/31] riscv: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 20/31] arm,sparc,unicore32: remove flush_icache_user_range   Christoph Hellwig
  • [PATCH 21/31] mm: rename flush_icache_user_range to flush_icache_user_page   Christoph Hellwig
    • [PATCH 21/31] mm: rename flush_icache_user_range to flush_icache_user_page   Geert Uytterhoeven
  • [PATCH 22/31] asm-generic: add a flush_icache_user_range stub   Christoph Hellwig
  • [PATCH 23/31] sh: implement flush_icache_user_range   Christoph Hellwig
  • [PATCH 24/31] xtensa: implement flush_icache_user_range   Christoph Hellwig
  • [PATCH 25/31] arm: rename flush_cache_user_range to flush_icache_user_range   Christoph Hellwig
  • [PATCH 26/31] m68k: implement flush_icache_user_range   Christoph Hellwig
    • [PATCH 26/31] m68k: implement flush_icache_user_range   Geert Uytterhoeven
  • [PATCH 27/31] exec: only build read_code when needed   Christoph Hellwig
  • [PATCH 28/31] exec: use flush_icache_user_range in read_code   Christoph Hellwig
  • [PATCH 29/31] binfmt_flat: use flush_icache_user_range   Christoph Hellwig
    • [PATCH 29/31] binfmt_flat: use flush_icache_user_range   Greg Ungerer
  • [PATCH 30/31] nommu: use flush_icache_user_range in brk and mmap   Christoph Hellwig
  • [PATCH 31/31] module: move the set_fs hack for flush_icache_range to m68k   Christoph Hellwig
    • [PATCH 31/31] module: move the set_fs hack for flush_icache_range to m68k   Geert Uytterhoeven
      • [PATCH 31/31] module: move the set_fs hack for flush_icache_range to m68k   Christoph Hellwig
      • [PATCH 31/31] module: move the set_fs hack for flush_icache_range to m68k   Geert Uytterhoeven
      • [PATCH 31/31] module: move the set_fs hack for flush_icache_range to m68k   Christoph Hellwig
  • sort out the flush_icache_range mess   Geert Uytterhoeven
    • sort out the flush_icache_range mess   Christoph Hellwig
      • sort out the flush_icache_range mess   Geert Uytterhoeven
      • sort out the flush_icache_range mess   Christoph Hellwig
• [PATCH v2] papr/scm: Add bad memory ranges to nvdimm bad ranges   Vaibhav Jain
• [PATCH v5 00/16] powerpc/watchpoint: Preparation for more than one watchpoint   Ravi Bangoria
  • [PATCH v5 03/16] powerpc/watchpoint: Introduce function to get nr watchpoints dynamically   Ravi Bangoria
  • [PATCH v5 04/16] powerpc/watchpoint/ptrace: Return actual num of available watchpoints   Ravi Bangoria
  • [PATCH v5 05/16] powerpc/watchpoint: Provide DAWR number to set_dawr   Ravi Bangoria
  • [PATCH v5 06/16] powerpc/watchpoint: Provide DAWR number to __set_breakpoint   Ravi Bangoria
  • [PATCH v5 07/16] powerpc/watchpoint: Get watchpoint count dynamically while disabling them   Ravi Bangoria
  • [PATCH v5 08/16] powerpc/watchpoint: Disable all available watchpoints when !dawr_force_enable   Ravi Bangoria
  • [PATCH v5 09/16] powerpc/watchpoint: Convert thread_struct->hw_brk to an array   Ravi Bangoria
  • [PATCH v5 10/16] powerpc/watchpoint: Use loop for thread_struct->ptrace_bps   Ravi Bangoria
  • [PATCH v5 11/16] powerpc/watchpoint: Introduce is_ptrace_bp() function   Ravi Bangoria
  • [PATCH v5 12/16] powerpc/watchpoint: Use builtin ALIGN*() macros   Ravi Bangoria
  • [PATCH v5 13/16] powerpc/watchpoint: Prepare handler to handle more than one watcnhpoint   Ravi Bangoria
  • [PATCH v5 14/16] powerpc/watchpoint: Don't allow concurrent perf and ptrace events   Ravi Bangoria
  • [PATCH v5 15/16] powerpc/watchpoint/xmon: Don't allow breakpoint overwriting   Ravi Bangoria
  • [PATCH v5 16/16] powerpc/watchpoint/xmon: Support 2nd DAWR   Ravi Bangoria
• [PATCH v5 01/16] powerpc/watchpoint: Rename current DAWR macros   Ravi Bangoria
• [PATCH v5 02/16] powerpc/watchpoint: Add SPRN macros for second DAWR   Ravi Bangoria
• [powerpc:fixes-test] BUILD SUCCESS 25107dc0610d8687ebbf4fc56323babf87149cb4   kbuild test robot
• [powerpc:merge] BUILD SUCCESS 78263190ec9727216ca715bfc0ee8b58b657d1ea   kbuild test robot
• [powerpc:topic/ppc-kvm] BUILD SUCCESS b1f9be9392f090f08e4ad9e2c68963aeff03bd67   kbuild test robot
• [powerpc:fixes] BUILD SUCCESS c44dc6323cd49d8d742c37e234b952e822c35de4   kbuild test robot
• [PATCH v3 1/2] powerpc/64s/hash: add torture_slb kernel boot option to increase SLB faults   Nicholas Piggin
  • [PATCH v3 2/2] powerpc/64s/hash: add torture_hpt kernel boot option to increase hash faults   Nicholas Piggin
• [PATCH v2] powerpc/64/signal: balance return predictor stack in signal trampoline   Nicholas Piggin
• [PATCH v3 00/45] Use hugepages to map kernel mem on 8xx   Christophe Leroy
  • [PATCH v3 05/45] powerpc/kasan: Refactor update of early shadow mappings   Christophe Leroy
  • [PATCH v3 06/45] powerpc/kasan: Declare kasan_init_region() weak   Christophe Leroy
  • [PATCH v3 07/45] powerpc/ptdump: Limit size of flags text to 1/2 chars on PPC32   Christophe Leroy
  • [PATCH v3 08/45] powerpc/ptdump: Reorder flags   Christophe Leroy
  • [PATCH v3 09/45] powerpc/ptdump: Add _PAGE_COHERENT flag   Christophe Leroy
  • [PATCH v3 10/45] powerpc/ptdump: Display size of BATs   Christophe Leroy
  • [PATCH v3 11/45] powerpc/ptdump: Standardise display of BAT flags   Christophe Leroy
  • [PATCH v3 12/45] powerpc/ptdump: Properly handle non standard page size   Christophe Leroy
  • [PATCH v3 13/45] powerpc/ptdump: Handle hugepd at PGD level   Christophe Leroy
  • [PATCH v3 14/45] powerpc/32s: Don't warn when mapping RO data ROX.   Christophe Leroy
  • [PATCH v3 15/45] powerpc/mm: Allocate static page tables for fixmap   Christophe Leroy
  • [PATCH v3 16/45] powerpc/mm: Fix conditions to perform MMU specific management by blocks on PPC32.   Christophe Leroy
  • [PATCH v3 17/45] powerpc/mm: PTE_ATOMIC_UPDATES is only for 40x   Christophe Leroy
  • [PATCH v3 18/45] powerpc/mm: Refactor pte_update() on nohash/32   Christophe Leroy
  • [PATCH v3 19/45] powerpc/mm: Refactor pte_update() on book3s/32   Christophe Leroy
  • [PATCH v3 20/45] powerpc/mm: Standardise __ptep_test_and_clear_young() params between PPC32 and PPC64   Christophe Leroy
  • [PATCH v3 21/45] powerpc/mm: Standardise pte_update() prototype between PPC32 and PPC64   Christophe Leroy
  • [PATCH v3 22/45] powerpc/mm: Create a dedicated pte_update() for 8xx   Christophe Leroy
  • [PATCH v3 23/45] powerpc/mm: Reduce hugepd size for 8M hugepages on 8xx   Christophe Leroy
  • [PATCH v3 24/45] powerpc/8xx: Drop CONFIG_8xx_COPYBACK option   Christophe Leroy
  • [PATCH v3 25/45] powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.   Christophe Leroy
  • [PATCH v3 26/45] powerpc/8xx: Manage 512k huge pages as standard pages.   Christophe Leroy
  • [PATCH v3 27/45] powerpc/8xx: Only 8M pages are hugepte pages now   Christophe Leroy
  • [PATCH v3 28/45] powerpc/8xx: MM_SLICE is not needed anymore   Christophe Leroy
  • [PATCH v3 29/45] powerpc/8xx: Move PPC_PIN_TLB options into 8xx Kconfig   Christophe Leroy
  • [PATCH v3 30/45] powerpc/8xx: Add function to set pinned TLBs   Christophe Leroy
  • [PATCH v3 31/45] powerpc/8xx: Don't set IMMR map anymore at boot   Christophe Leroy
  • [PATCH v3 32/45] powerpc/8xx: Always pin TLBs at startup.   Christophe Leroy
  • [PATCH v3 33/45] powerpc/8xx: Drop special handling of Linear and IMMR mappings in I/D TLB handlers   Christophe Leroy
  • [PATCH v3 34/45] powerpc/8xx: Remove now unused TLB miss functions   Christophe Leroy
  • [PATCH v3 35/45] powerpc/8xx: Move DTLB perf handling closer.   Christophe Leroy
  • [PATCH v3 36/45] powerpc/mm: Don't be too strict with _etext alignment on PPC32   Christophe Leroy
  • [PATCH v3 37/45] powerpc/8xx: Refactor kernel address boundary comparison   Christophe Leroy
  • [PATCH v3 38/45] powerpc/8xx: Add a function to early map kernel via huge pages   Christophe Leroy
  • [PATCH v3 39/45] powerpc/8xx: Map IMMR with a huge page   Christophe Leroy
  • [PATCH v3 40/45] powerpc/8xx: Map linear memory with huge pages   Christophe Leroy
  • [PATCH v3 41/45] powerpc/8xx: Allow STRICT_KERNEL_RwX with pinned TLB   Christophe Leroy
  • [PATCH v3 42/45] powerpc/8xx: Allow large TLBs with DEBUG_PAGEALLOC   Christophe Leroy
  • [PATCH v3 43/45] powerpc/8xx: Implement dedicated kasan_init_region()   Christophe Leroy
  • [PATCH v3 44/45] powerpc/32s: Allow mapping with BATs with DEBUG_PAGEALLOC   Christophe Leroy
  • [PATCH v3 45/45] powerpc/32s: Implement dedicated kasan_init_region()   Christophe Leroy
• [PATCH v3 01/45] powerpc/kasan: Fix error detection on memory allocation   Christophe Leroy
• [PATCH v3 02/45] powerpc/kasan: Fix issues by lowering KASAN_SHADOW_END   Christophe Leroy
• [PATCH v3 03/45] powerpc/kasan: Fix shadow pages allocation failure   Christophe Leroy
• [PATCH v3 04/45] powerpc/kasan: Remove unnecessary page table locking   Christophe Leroy
• [PATCH 1/2] powerpc/pmem: Add new instructions for persistent storage and sync   Aneesh Kumar K.V
• [PATCH 2/2] powerpc/pmem: Add flush routines using new pmem store and sync instruction   Aneesh Kumar K.V
• [powerpc:next] BUILD SUCCESS 1f12096aca212af8fad3ef58d5673cde691a1452   kbuild test robot
• [PATCH v4 1/2] powerpc/64s/hash: Add stress_slb kernel boot option to increase SLB faults   Michael Ellerman
  • [PATCH v4 2/2] powerpc/64s/hash: Add stress_hpt kernel boot option to increase hash faults   Michael Ellerman
    • [PATCH v4 2/2] powerpc/64s/hash: Add stress_hpt kernel boot option to increase hash faults   Nicholas Piggin
• [PATCH v3 1/1] ppc/crash: Reset spinlocks during crash   Leonardo Bras
  • [PATCH v3 1/1] ppc/crash: Reset spinlocks during crash   Michael Ellerman
• [PATCH] ASoC: fsl_asrc: Set ASR76K and ASR56K based on processing clock   Shengjiu Wang
  • [PATCH] ASoC: fsl_asrc: Set ASR76K and ASR56K based on processing clock   Mark Brown
• [PATCH 0/4] Base support for POWER10   Alistair Popple
  • [PATCH 2/4] powerpc: Add base support for ISA v3.1   Alistair Popple
  • [PATCH 3/4] powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected   Alistair Popple
  • [PATCH 4/4] powerpc: Add POWER10 architected mode   Alistair Popple
• [PATCH 1/4] powerpc: Add new HWCAP bits   Alistair Popple
• [PATCH v4 0/3] Offline memoryless cpuless node 0   Srikar Dronamraju
  • [PATCH v4 1/3] powerpc/numa: Set numa_node for all possible cpus   Srikar Dronamraju
  • [PATCH v4 2/3] powerpc/numa: Prefer node id queried from vphn   Srikar Dronamraju
    • [PATCH v4 2/3] powerpc/numa: Prefer node id queried from vphn   Gautham R Shenoy
  • [PATCH v4 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Srikar Dronamraju
    • [PATCH v4 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Christopher Lameter
      • [PATCH v4 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline   Srikar Dronamraju
• [PATCH 00/12] mm: consolidate definitions of page table accessors   Mike Rapoport
  • [PATCH 01/12] mm: don't include asm/pgtable.h if linux/mm.h is already included   Mike Rapoport
  • [PATCH 02/12] mm: introduce include/linux/pgtable.h   Mike Rapoport
  • [PATCH 03/12] mm: reorder includes after introduction of linux/pgtable.h   Mike Rapoport
    • [PATCH 03/12] mm: reorder includes after introduction of linux/pgtable.h   Matthew Wilcox
      • [PATCH 03/12] mm: reorder includes after introduction of linux/pgtable.h   Mike Rapoport
  • [PATCH 04/12] csky: replace definitions of __pXd_offset() with pXd_index()   Mike Rapoport
  • [PATCH 05/12] m68k/mm/motorola: move comment about page table allocation funcitons   Mike Rapoport
  • [PATCH 06/12] m68k/mm: move {cache, nocahe}_page() definitions close to their user   Mike Rapoport
    • [PATCH 06/12] m68k/mm: move {cache,nocahe}_page() definitions close to their user   Greg Ungerer
  • [PATCH 07/12] x86/mm: simplify init_trampoline() and surrounding logic   Mike Rapoport
  • [PATCH 08/12] mm: pgtable: add shortcuts for accessing kernel PMD and PTE   Mike Rapoport
    • [PATCH 08/12] mm: pgtable: add shortcuts for accessing kernel PMD and PTE   Matthew Wilcox
      • [PATCH 08/12] mm: pgtable: add shortcuts for accessing kernel PMD and PTE   Mike Rapoport
  • [PATCH 09/12] mm: consolidate pte_index() and pte_offset_*() definitions   Mike Rapoport
  • [PATCH 10/12] mm: consolidate pmd_index() and pmd_offset() definitions   Mike Rapoport
  • [PATCH 11/12] mm: consolidate pud_index() and pud_offset() definitions   Mike Rapoport
  • [PATCH 12/12] mm: consolidate pgd_index() and pgd_offset{_k}() definitions   Mike Rapoport
• [PATCH v2 1/1] powerpc/crash: Use NMI context for printk when starting to crash   Leonardo Bras
  • [PATCH v2 1/1] powerpc/crash: Use NMI context for printk when starting to crash   Nicholas Piggin
    • [PATCH v2 1/1] powerpc/crash: Use NMI context for printk when starting to crash   Leonardo Bras
• [PATCH] powerpc/book3s64/radix/tlb: Determine hugepage flush correctly   Aneesh Kumar K.V
  • [PATCH] powerpc/book3s64/radix/tlb: Determine hugepage flush correctly   Nicholas Piggin
    • [PATCH] powerpc/book3s64/radix/tlb: Determine hugepage flush correctly   Michael Ellerman
• [PATCH v2 1/5] powerpc/pmem: Add new instructions for persistent storage and sync   Aneesh Kumar K.V
  • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
    • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Dan Williams
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Dan Williams
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Dan Williams
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Jeff Moyer
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Dan Williams
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Mikulas Patocka
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Michal Suchánek
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Mikulas Patocka
      • [PATCH v2 3/5] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Dan Williams
  • [PATCH v2 4/5] powerpc/pmem/of_pmem: Update of_pmem to use the new barrier instruction.   Aneesh Kumar K.V
    • [PATCH v2 4/5] powerpc/pmem/of_pmem: Update of_pmem to use the new barrier instruction.   kbuild test robot
  • [PATCH v2 5/5] powerpc/pmem: Avoid the barrier in flush routines   Aneesh Kumar K.V
• [PATCH v2 2/5] powerpc/pmem: Add flush routines using new pmem store and sync instruction   Aneesh Kumar K.V
• [PATCH 1/1] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
  • [PATCH 1/1] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
  • [PATCH 1/1] powerpc/rtas: Implement reentrant rtas call   Nathan Lynch
    • [PATCH 1/1] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
• [PATCH v2 1/2] powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h   Leonardo Bras
  • [PATCH v2 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
    • [PATCH v2 2/2] powerpc/rtas: Implement reentrant rtas call   kbuild test robot
• [PATCH] powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG   Michael Ellerman
• [PATCH 0/6] assorted kuap fixes   Michael Ellerman
• [PATCH v3] powerpc/uaccess: evaluate macro arguments once, before user access is allowed   Michael Ellerman
  • [PATCH v3] powerpc/uaccess: evaluate macro arguments once, before user access is allowed   Michael Ellerman
• [PATCH] powerpc/kvm/radix: ignore kmemleak false positives   Qian Cai
  • [PATCH] powerpc/kvm/radix: ignore kmemleak false positives   Paul Mackerras
• [PATCH] powerpc/xive: silence kmemleak false positives   Qian Cai
• [powerpc:fixes-test] BUILD SUCCESS 249c9b0cd193d983c3a0b00f3fd3b92333bfeebe   kbuild test robot
• [powerpc:merge] BUILD SUCCESS 93369d50dc0f266ee67adcc6053c96700236d8be   kbuild test robot
• [powerpc:next-test] BUILD SUCCESS 9aaaca63114c41ad857bb9889732c0827a1689af   kbuild test robot
• [PATCH v6 0/2] Append new variables to vmcoreinfo (TCR_EL1.T1SZ for arm64 and MAX_PHYSMEM_BITS for all archs)   Bhupesh Sharma
• [PATCH v6 1/2] crash_core, vmcoreinfo: Append 'MAX_PHYSMEM_BITS' to vmcoreinfo   Bhupesh Sharma
• [PATCH 06/11] powerpc/xmon: constify sysrq_key_op   Emil Velikov
  • [PATCH 06/11] powerpc/xmon: constify sysrq_key_op   Michael Ellerman
• [PATCH v3 0/2] Implement reentrant rtas call   Leonardo Bras
  • [PATCH v3 1/2] powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h   Leonardo Bras
  • [PATCH v3 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
    • [PATCH v3 2/2] powerpc/rtas: Implement reentrant rtas call   Nathan Lynch
      • [PATCH v3 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
      • [PATCH v3 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
• [PATCH v6 00/16] powerpc/watchpoint: Preparation for more than one watchpoint   Ravi Bangoria
  • [PATCH v6 01/16] powerpc/watchpoint: Rename current DAWR macros   Ravi Bangoria
  • [PATCH v6 02/16] powerpc/watchpoint: Add SPRN macros for second DAWR   Ravi Bangoria
  • [PATCH v6 03/16] powerpc/watchpoint: Introduce function to get nr watchpoints dynamically   Ravi Bangoria
  • [PATCH v6 04/16] powerpc/watchpoint/ptrace: Return actual num of available watchpoints   Ravi Bangoria
  • [PATCH v6 05/16] powerpc/watchpoint: Provide DAWR number to set_dawr   Ravi Bangoria
  • [PATCH v6 06/16] powerpc/watchpoint: Provide DAWR number to __set_breakpoint   Ravi Bangoria
  • [PATCH v6 07/16] powerpc/watchpoint: Get watchpoint count dynamically while disabling them   Ravi Bangoria
  • [PATCH v6 08/16] powerpc/watchpoint: Disable all available watchpoints when !dawr_force_enable   Ravi Bangoria
  • [PATCH v6 09/16] powerpc/watchpoint: Convert thread_struct->hw_brk to an array   Ravi Bangoria
  • [PATCH v6 10/16] powerpc/watchpoint: Use loop for thread_struct->ptrace_bps   Ravi Bangoria
  • [PATCH v6 11/16] powerpc/watchpoint: Introduce is_ptrace_bp() function   Ravi Bangoria
  • [PATCH v6 12/16] powerpc/watchpoint: Use builtin ALIGN*() macros   Ravi Bangoria
  • [PATCH v6 13/16] powerpc/watchpoint: Prepare handler to handle more than one watcnhpoint   Ravi Bangoria
  • [PATCH v6 14/16] powerpc/watchpoint: Don't allow concurrent perf and ptrace events   Ravi Bangoria
  • [PATCH v6 15/16] powerpc/watchpoint/xmon: Don't allow breakpoint overwriting   Ravi Bangoria
  • [PATCH v6 16/16] powerpc/watchpoint/xmon: Support 2nd DAWR   Ravi Bangoria
  • [PATCH v6 00/16] powerpc/watchpoint: Preparation for more than one watchpoint   Michael Ellerman
• [PATCH v2 00/12] mm: consolidate definitions of page table accessors   Mike Rapoport
  • [PATCH v2 01/12] mm: don't include asm/pgtable.h if linux/mm.h is already included   Mike Rapoport
  • [PATCH v2 02/12] mm: introduce include/linux/pgtable.h   Mike Rapoport
  • [PATCH v2 03/12] mm: reorder includes after introduction of linux/pgtable.h   Mike Rapoport
  • [PATCH v2 04/12] csky: replace definitions of __pXd_offset() with pXd_index()   Mike Rapoport
  • [PATCH v2 05/12] m68k/mm/motorola: move comment about page table allocation funcitons   Mike Rapoport
  • [PATCH v2 06/12] m68k/mm: move {cache, nocahe}_page() definitions close to their user   Mike Rapoport
  • [PATCH v2 07/12] x86/mm: simplify init_trampoline() and surrounding logic   Mike Rapoport
  • [PATCH v2 08/12] mm: pgtable: add shortcuts for accessing kernel PMD and PTE   Mike Rapoport
  • [PATCH v2 09/12] mm: consolidate pte_index() and pte_offset_*() definitions   Mike Rapoport
  • [PATCH v2 10/12] mm: consolidate pmd_index() and pmd_offset() definitions   Mike Rapoport
  • [PATCH v2 11/12] mm: consolidate pud_index() and pud_offset() definitions   Mike Rapoport
  • [PATCH v2 12/12] mm: consolidate pgd_index() and pgd_offset{_k}() definitions   Mike Rapoport
  • [PATCH v2 00/12] mm: consolidate definitions of page table accessors   Andrew Morton
• [PATCH AUTOSEL 5.6 19/62] scsi: ibmvscsi: Fix WARN_ON during event pool release   Sasha Levin
• [PATCH AUTOSEL 5.6 21/62] ibmvnic: Skip fatal error reset after passive init   Sasha Levin
• [PATCH AUTOSEL 5.4 18/49] scsi: ibmvscsi: Fix WARN_ON during event pool release   Sasha Levin
• [PATCH AUTOSEL 5.4 21/49] ibmvnic: Skip fatal error reset after passive init   Sasha Levin
• [PATCH AUTOSEL 4.19 15/31] scsi: ibmvscsi: Fix WARN_ON during event pool release   Sasha Levin
• [PATCH AUTOSEL 4.14 21/39] scsi: ibmvscsi: Fix WARN_ON during event pool release   Sasha Levin
• [PATCH v4 0/2] Implement reentrant rtas call   Leonardo Bras
  • [PATCH v4 1/2] powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h   Leonardo Bras
  • [PATCH v4 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
    • [PATCH v4 2/2] powerpc/rtas: Implement reentrant rtas call   Nicholas Piggin
      • [PATCH v4 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
• [PATCH v2 0/2] ASoC: fsl_esai: Add support for imx8qm   Shengjiu Wang
  • [PATCH v2 2/2] ASoC: fsl_esai: Add new compatible string for imx8qm   Shengjiu Wang
  • [PATCH v2 0/2] ASoC: fsl_esai: Add support for imx8qm   Mark Brown
• [PATCH v2 1/2] ASoC: fsl_esai: introduce SoC specific data   Shengjiu Wang
• sort out the flush_icache_range mess v2   Christoph Hellwig
  • [PATCH 01/29] arm: fix the flush_icache_range arguments in set_fiq_handler   Christoph Hellwig
  • [PATCH 02/29] nds32: unexport flush_icache_page   Christoph Hellwig
  • [PATCH 03/29] powerpc: unexport flush_icache_user_range   Christoph Hellwig
  • [PATCH 04/29] unicore32: remove flush_cache_user_range   Christoph Hellwig
  • [PATCH 05/29] asm-generic: fix the inclusion guards for cacheflush.h   Christoph Hellwig
  • [PATCH 06/29] asm-generic: don't include <linux/mm.h> in cacheflush.h   Christoph Hellwig
    • [PATCH] media: omap3isp: Shuffle cacheflush.h and include mm.h   Nathan Chancellor
      • [PATCH] media: omap3isp: Shuffle cacheflush.h and include mm.h   Christoph Hellwig
      • [PATCH] media: omap3isp: Shuffle cacheflush.h and include mm.h   Geert Uytterhoeven
      • [PATCH] media: omap3isp: Shuffle cacheflush.h and include mm.h   Nathan Chancellor
      • [PATCH] media: omap3isp: Shuffle cacheflush.h and include mm.h   Laurent Pinchart
  • [PATCH 07/29] asm-generic: improve the flush_dcache_page stub   Christoph Hellwig
  • [PATCH 08/29] alpha: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 09/29] arm64: use asm-generic/cacheflush.h   Christoph Hellwig
    • [PATCH 09/29] arm64: use asm-generic/cacheflush.h   Catalin Marinas
  • [PATCH 10/29] c6x: use asm-generic/cacheflush.h   Christoph Hellwig
    • [PATCH 10/29] c6x: use asm-generic/cacheflush.h   Mark Salter
  • [PATCH 11/29] hexagon: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 12/29] ia64: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 13/29] microblaze: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 14/29] m68knommu: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 15/29] openrisc: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 16/29] powerpc: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 17/29] riscv: use asm-generic/cacheflush.h   Christoph Hellwig
  • [PATCH 18/29] arm,sparc,unicore32: remove flush_icache_user_range   Christoph Hellwig
  • [PATCH 19/29] mm: rename flush_icache_user_range to flush_icache_user_page   Christoph Hellwig
  • [PATCH 20/29] asm-generic: add a flush_icache_user_range stub   Christoph Hellwig
  • [PATCH 21/29] sh: implement flush_icache_user_range   Christoph Hellwig
  • [PATCH 22/29] xtensa: implement flush_icache_user_range   Christoph Hellwig
  • [PATCH 23/29] arm: rename flush_cache_user_range to flush_icache_user_range   Christoph Hellwig
  • [PATCH 24/29] m68k: implement flush_icache_user_range   Christoph Hellwig
  • [PATCH 25/29] exec: only build read_code when needed   Christoph Hellwig
  • [PATCH 26/29] exec: use flush_icache_user_range in read_code   Christoph Hellwig
  • [PATCH 27/29] binfmt_flat: use flush_icache_user_range   Christoph Hellwig
  • [PATCH 28/29] nommu: use flush_icache_user_range in brk and mmap   Christoph Hellwig
  • [PATCH 29/29] module: move the set_fs hack for flush_icache_range to m68k   Christoph Hellwig
    • [PATCH 29/29] module: move the set_fs hack for flush_icache_range to m68k   Jessica Yu
• [PATCH v4 03/14] arm64: add support for folded p4d page tables   Andrew Morton
  • [PATCH v4 03/14] arm64: add support for folded p4d page tables   Mike Rapoport
• [PATCH v4 0/6] allow ramoops to collect all kmesg_dump events   Kees Cook
  • [PATCH v4 6/6] ramoops: Add max_reason optional field to ramoops DT node   Kees Cook
    • [PATCH v4 6/6] ramoops: Add max_reason optional field to ramoops DT node   Rob Herring
      • [PATCH v4 6/6] ramoops: Add max_reason optional field to ramoops DT node   Kees Cook
  • [PATCH v4 0/6] allow ramoops to collect all kmesg_dump events   Pavel Tatashin
• [PATCH v4 1/6] printk: Collapse shutdown types into a single dump reason   Kees Cook
  • [PATCH v4 1/6] printk: Collapse shutdown types into a single dump reason   Pavel Tatashin
  • [PATCH v4 1/6] printk: Collapse shutdown types into a single dump reason   Petr Mladek
  • [PATCH v4 1/6] printk: Collapse shutdown types into a single dump reason   Michael Ellerman
• [PATCH v4 2/6] printk: honor the max_reason field in kmsg_dumper   Kees Cook
  • [PATCH v4 2/6] printk: honor the max_reason field in kmsg_dumper   Petr Mladek
    • [PATCH v4 2/6] printk: honor the max_reason field in kmsg_dumper   Kees Cook
• [PATCH v4 3/6] printk: Introduce kmsg_dump_reason_str()   Kees Cook
  • [PATCH v4 3/6] printk: Introduce kmsg_dump_reason_str()   Pavel Tatashin
• [PATCH v4 4/6] pstore/platform: Pass max_reason to kmesg dump   Kees Cook
• [PATCH v4 5/6] pstore/ram: Introduce max_reason and convert dump_oops   Kees Cook
  • [PATCH v4 5/6] pstore/ram: Introduce max_reason and convert dump_oops   Pavel Tatashin
    • [PATCH v4 5/6] pstore/ram: Introduce max_reason and convert dump_oops   Kees Cook
  • [PATCH v4 5/6] pstore/ram: Introduce max_reason and convert dump_oops   Pavel Tatashin
    • [PATCH v4 5/6] pstore/ram: Introduce max_reason and convert dump_oops   Kees Cook
• powerpc/pci: [PATCH 1/1 V2] PCIE PHB reset   wenxiong at linux.vnet.ibm.com
  • powerpc/pci: [PATCH 1/1 V2] PCIE PHB reset   Gustavo Romero
• [PATCH v5 0/2] Implement reentrant rtas call   Leonardo Bras
  • [PATCH v5 1/2] powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h   Leonardo Bras
  • [PATCH v5 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
    • [PATCH v5 2/2] powerpc/rtas: Implement reentrant rtas call   Nicholas Piggin
      • [PATCH v5 2/2] powerpc/rtas: Implement reentrant rtas call   Nicholas Piggin
      • [PATCH v5 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
    • [PATCH v5 2/2] powerpc/rtas: Implement reentrant rtas call   kbuild test robot
• [GIT PULL] Please pull powerpc/linux.git powerpc-5.7-4 tag   Michael Ellerman
  • [GIT PULL] Please pull powerpc/linux.git powerpc-5.7-4 tag   pr-tracker-bot at kernel.org
• [powerpc:merge] BUILD SUCCESS 5b55902a1d35b73daec747b11b903959b8e7aa70   kbuild test robot
• [powerpc:next-test] BUILD SUCCESS 7b92ee1db93df64553a36f23fec86298d37ee10a   kbuild test robot
• [PATCH] powerpc/64s: Fix early_init_mmu section mismatch   Christian Zigotzky
  • [PATCH] powerpc/64s: Fix early_init_mmu section mismatch   Michael Ellerman
    • [PATCH] powerpc/64s: Fix early_init_mmu section mismatch   Christian Zigotzky
• [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Emil Velikov
  • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Benjamin Herrenschmidt
    • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Emil Velikov
      • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Benjamin Herrenschmidt
  • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Michael Ellerman
    • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Emil Velikov
      • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Benjamin Herrenschmidt
      • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Bartlomiej Zolnierkiewicz
      • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Emil Velikov
    • [PATCH v2 2/2] powerpc/configs: replace deprecated riva/nvidia with nouveau   Andreas Schwab
• [PATCH v3] powerpc/64: Option to use ELF V2 ABI for big-endian kernels   Michael Ellerman
  • [PATCH v3] powerpc/64: Option to use ELF V2 ABI for big-endian kernels   Segher Boessenkool
    • [PATCH v3] powerpc/64: Option to use ELF V2 ABI for big-endian kernels   Nicholas Piggin
• [PATCH] ASoC: fsl_micfil: Fix format and unused assignment   Tang Bin
  • [PATCH] ASoC: fsl_micfil: Fix format and unused assignment   Mark Brown
    • [PATCH] ASoC: fsl_micfil: Fix format and unused assignment   Tang Bin
• [PATCH] powerpc/wii: Fix declaration made after definition   Nathan Chancellor
  • [PATCH] powerpc/wii: Fix declaration made after definition   Nick Desaulniers
• [PATCH] powerpc/sysdev: fix compile errors   Jiri Kosina
  • [PATCH] powerpc/sysdev: fix compile errors   Jiri Kosina
    • [PATCH] powerpc/sysdev: fix compile errors   Christophe Leroy
    • [PATCH] powerpc/sysdev: fix compile errors   Michael Ellerman
• [PATCH] ASoC: fsl_micfil: Fix indentation to put on one line affected code   Tang Bin
  • [PATCH] ASoC: fsl_micfil: Fix indentation to put on one line affected code   Mark Brown
• [PATCH] ASoC: fsl_micfil: Fix unused assignment in fsl_set_clock_params()   Tang Bin
  • [PATCH] ASoC: fsl_micfil: Fix unused assignment in fsl_set_clock_params()   Mark Brown
• [RFC PATCH 0/4] powerpc/papr_scm: Add support for reporting NVDIMM performance statistics   Vaibhav Jain
  • [RFC PATCH 2/4] powerpc/papr_scm: Add support for PAPR_SCM_PDSM_FETCH_PERF_STATS   Vaibhav Jain
  • [RFC PATCH 3/4] powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_READ_PERF_STATS   Vaibhav Jain
  • [RFC PATCH 4/4] powerpc/papr_scm: Add support for PDSM GET_PERF_STAT   Vaibhav Jain
• [RFC PATCH 1/4] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP   Vaibhav Jain
• debian-powerpc at lists.debian.org   Rui Salvaterra
• [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6,7)   Rui Salvaterra
  • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6,7)   Christophe Leroy
    • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6, 7)   Rui Salvaterra
      • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6,7)   Christophe Leroy
      • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6, 7)   Rui Salvaterra
      • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6,7)   Christophe Leroy
      • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6, 7)   Rui Salvaterra
      • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6, 7)   Aneesh Kumar K.V
      • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6,7)   Christophe Leroy
      • [Regression 5.7-rc1] Random hangs on 32-bit PowerPC (PowerBook6,7)   Aneesh Kumar K.V
• [PATCH v9 0/5] powerpc/hv-24x7: Expose chip/sockets info to add json file metric support for the hv_24x7 socket/chip level events   Kajol Jain
  • [PATCH v9 1/5] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run   Kajol Jain
  • [PATCH v9 2/5] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details   Kajol Jain
  • [PATCH v9 3/5] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show processor details   Kajol Jain
  • [PATCH v9 4/5] Documentation/ABI: Add ABI documentation for chips and sockets   Kajol Jain
  • [PATCH v9 5/5] powerpc/pseries: Update hv-24x7 information after migration   Kajol Jain
• Remove WALNUT hacks in serio/i8042 (was Re: ld.lld: error: undefined symbol: kb_cs)   Michael Ellerman
  • [PATCH] input: i8042: Remove special PowerPC handling   Nathan Chancellor
    • [PATCH] input: i8042: Remove special PowerPC handling   Michael Ellerman
      • [PATCH] input: i8042: Remove special PowerPC handling   Dmitry Torokhov
      • [PATCH] input: i8042: Remove special PowerPC handling   Michael Ellerman
• [PATCH 16/21] mm: remove early_pfn_in_nid() and CONFIG_NODES_SPAN_OTHER_NODES   Hoan Tran
• [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Gustavo A. R. Silva
  • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Kees Cook
    • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Li Yang
      • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Gustavo A. R. Silva
      • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Kees Cook
      • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Li Yang
      • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Qiang Zhao
      • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Li Yang
  • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Qiang Zhao
  • [PATCH] soc: fsl: qe: Replace one-element array and use struct_size() helper   Li Yang
• [powerpc:next] BUILD SUCCESS 30df74d67d48949da87e3a5b57c381763e8fd526   kbuild test robot
• [PATCH v6 0/2] Implement reentrant rtas call   Leonardo Bras
  • [PATCH v6 1/2] powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h   Leonardo Bras
  • [PATCH v6 2/2] powerpc/rtas: Implement reentrant rtas call   Leonardo Bras
• [powerpc:merge] BUILD SUCCESS 7b06fb8795ffea9d12be45a172197c3307955479   kbuild test robot
• [PATCH v3 1/1] powerpc/crash: Use NMI context for printk when starting to crash   Leonardo Bras
• [PATCH v2 0/7] Base support for POWER10   Alistair Popple
  • [PATCH v2 1/7] powerpc: Add new HWCAP bits   Alistair Popple
    • [PATCH v2 1/7] powerpc: Add new HWCAP bits   Michael Neuling
    • [PATCH v2 1/7] powerpc: Add new HWCAP bits   Paul A. Clarke
    • [PATCH v2 1/7] powerpc: Add new HWCAP bits   Michael Ellerman
      • [PATCH v2 1/7] powerpc: Add new HWCAP bits   Alistair Popple
  • [PATCH v2 2/7] powerpc: Add support for ISA v3.1   Alistair Popple
    • [PATCH v2 2/7] powerpc: Add support for ISA v3.1   Jordan Niethe
      • [PATCH v2 2/7] powerpc: Add support for ISA v3.1   Alistair Popple
  • [PATCH v2 3/7] powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected   Alistair Popple
  • [PATCH v2 4/7] powerpc/dt_cpu_ftrs: Set current thread fscr bits   Alistair Popple
  • [PATCH v2 5/7] powerpc/dt_cpu_ftrs: Enable Prefixed Instructions   Alistair Popple
  • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Alistair Popple
    • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Paul A. Clarke
      • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Segher Boessenkool
      • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Paul A. Clarke
      • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Segher Boessenkool
      • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Paul A. Clarke
    • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Paul A. Clarke
      • [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Alistair Popple
  • [PATCH v2 7/7] powerpc: Add POWER10 architected mode   Alistair Popple
    • [PATCH v2 7/7] powerpc: Add POWER10 architected mode   Jordan Niethe
• [PATCH] powerpc/configs: Add LIBNVDIMM to ppc64_defconfig   Michael Neuling
• [PATCH v4 00/45] Use hugepages to map kernel mem on 8xx   Christophe Leroy
  • [PATCH v4 02/45] powerpc/kasan: Fix issues by lowering KASAN_SHADOW_END   Christophe Leroy
  • [PATCH v4 03/45] powerpc/kasan: Fix shadow pages allocation failure   Christophe Leroy
  • [PATCH v4 04/45] powerpc/kasan: Remove unnecessary page table locking   Christophe Leroy
  • [PATCH v4 05/45] powerpc/kasan: Refactor update of early shadow mappings   Christophe Leroy
  • [PATCH v4 19/45] powerpc/mm: Refactor pte_update() on book3s/32   Christophe Leroy
  • [PATCH v4 20/45] powerpc/mm: Standardise __ptep_test_and_clear_young() params between PPC32 and PPC64   Christophe Leroy
  • [PATCH v4 21/45] powerpc/mm: Standardise pte_update() prototype between PPC32 and PPC64   Christophe Leroy
  • [PATCH v4 22/45] powerpc/mm: Create a dedicated pte_update() for 8xx   Christophe Leroy
  • [PATCH v4 23/45] powerpc/mm: Reduce hugepd size for 8M hugepages on 8xx   Christophe Leroy
  • [PATCH v4 24/45] powerpc/8xx: Drop CONFIG_8xx_COPYBACK option   Christophe Leroy
  • [PATCH v4 25/45] powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.   Christophe Leroy
  • [PATCH v4 26/45] powerpc/8xx: Manage 512k huge pages as standard pages.   Christophe Leroy
  • [PATCH v4 27/45] powerpc/8xx: Only 8M pages are hugepte pages now   Christophe Leroy
  • [PATCH v4 28/45] powerpc/8xx: MM_SLICE is not needed anymore   Christophe Leroy
  • [PATCH v4 29/45] powerpc/8xx: Move PPC_PIN_TLB options into 8xx Kconfig   Christophe Leroy
  • [PATCH v4 30/45] powerpc/8xx: Add function to set pinned TLBs   Christophe Leroy
  • [PATCH v4 31/45] powerpc/8xx: Don't set IMMR map anymore at boot   Christophe Leroy
  • [PATCH v4 32/45] powerpc/8xx: Always pin TLBs at startup.   Christophe Leroy
  • [PATCH v4 33/45] powerpc/8xx: Drop special handling of Linear and IMMR mappings in I/D TLB handlers   Christophe Leroy
  • [PATCH v4 34/45] powerpc/8xx: Remove now unused TLB miss functions   Christophe Leroy
  • [PATCH v4 35/45] powerpc/8xx: Move DTLB perf handling closer.   Christophe Leroy
  • [PATCH v4 36/45] powerpc/mm: Don't be too strict with _etext alignment on PPC32   Christophe Leroy
  • [PATCH v4 37/45] powerpc/8xx: Refactor kernel address boundary comparison   Christophe Leroy
  • [PATCH v4 38/45] powerpc/8xx: Add a function to early map kernel via huge pages   Christophe Leroy
  • [PATCH v4 39/45] powerpc/8xx: Map IMMR with a huge page   Christophe Leroy
  • [PATCH v4 40/45] powerpc/8xx: Map linear memory with huge pages   Christophe Leroy
  • [PATCH v4 41/45] powerpc/8xx: Allow STRICT_KERNEL_RwX with pinned TLB   Christophe Leroy
  • [PATCH v4 42/45] powerpc/8xx: Allow large TLBs with DEBUG_PAGEALLOC   Christophe Leroy
  • [PATCH v4 43/45] powerpc/8xx: Implement dedicated kasan_init_region()   Christophe Leroy
  • [PATCH v4 44/45] powerpc/32s: Allow mapping with BATs with DEBUG_PAGEALLOC   Christophe Leroy
  • [PATCH v4 45/45] powerpc/32s: Implement dedicated kasan_init_region()   Christophe Leroy
• [PATCH v4 01/45] powerpc/kasan: Fix error detection on memory allocation   Christophe Leroy
• [PATCH v4 06/45] powerpc/kasan: Declare kasan_init_region() weak   Christophe Leroy
• [PATCH v4 07/45] powerpc/ptdump: Limit size of flags text to 1/2 chars on PPC32   Christophe Leroy
  • [PATCH v4 07/45] powerpc/ptdump: Limit size of flags text to 1/2 chars on PPC32   Michael Ellerman
    • [PATCH v4 07/45] powerpc/ptdump: Limit size of flags text to 1/2 chars on PPC32   Christophe Leroy
      • [PATCH v4 07/45] powerpc/ptdump: Limit size of flags text to 1/2 chars on PPC32   Michael Ellerman
• [PATCH v4 08/45] powerpc/ptdump: Reorder flags   Christophe Leroy
• [PATCH v4 09/45] powerpc/ptdump: Add _PAGE_COHERENT flag   Christophe Leroy
• [PATCH v4 10/45] powerpc/ptdump: Display size of BATs   Christophe Leroy
• [PATCH v4 11/45] powerpc/ptdump: Standardise display of BAT flags   Christophe Leroy
• [PATCH v4 12/45] powerpc/ptdump: Properly handle non standard page size   Christophe Leroy
• [PATCH v4 13/45] powerpc/ptdump: Handle hugepd at PGD level   Christophe Leroy
• [PATCH v4 14/45] powerpc/32s: Don't warn when mapping RO data ROX.   Christophe Leroy
  • [PATCH v4 14/45] powerpc/32s: Don't warn when mapping RO data ROX.   Michael Ellerman
• [PATCH v4 15/45] powerpc/mm: Allocate static page tables for fixmap   Christophe Leroy
• [PATCH v4 16/45] powerpc/mm: Fix conditions to perform MMU specific management by blocks on PPC32.   Christophe Leroy
• [PATCH v4 17/45] powerpc/mm: PTE_ATOMIC_UPDATES is only for 40x   Christophe Leroy
• [PATCH v4 18/45] powerpc/mm: Refactor pte_update() on nohash/32   Christophe Leroy
• [PATCH v3 1/7] powerpc/pmem: Restrict papr_scm to P8 and above.   Aneesh Kumar K.V
  • [PATCH v3 2/7] powerpc/pmem: Add new instructions for persistent storage and sync   Aneesh Kumar K.V
  • [PATCH v3 3/7] powerpc/pmem: Add flush routines using new pmem store and sync instruction   Aneesh Kumar K.V
    • [PATCH v3 3/7] powerpc/pmem: Add flush routines using new pmem store and sync instruction   kbuild test robot
  • [PATCH v3 4/7] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
  • [PATCH v3 5/7] powerpc/pmem/of_pmem: Update of_pmem to use the new barrier instruction.   Aneesh Kumar K.V
    • [PATCH v3 5/7] powerpc/pmem/of_pmem: Update of_pmem to use the new barrier instruction.   kbuild test robot
  • [PATCH v3 6/7] powerpc/pmem: Avoid the barrier in flush routines   Aneesh Kumar K.V
  • [PATCH v3 7/7] powerpc/book3s/pmem: Add WARN_ONCE to catch the wrong usage of pmem flush functions.   Aneesh Kumar K.V
• [PATCH V2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Athira Rajeev
  • [PATCH V2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Arnaldo Carvalho de Melo
  • [PATCH V2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Madhavan Srinivasan
• linux-next: manual merge of the rcu tree with the powerpc tree   Stephen Rothwell
  • linux-next: manual merge of the rcu tree with the powerpc tree   Michael Ellerman
  • linux-next: manual merge of the rcu tree with the powerpc tree   Stephen Rothwell
    • linux-next: manual merge of the rcu tree with the powerpc tree   Paul E. McKenney
      • linux-next: manual merge of the rcu tree with the powerpc tree   Thomas Gleixner
• [powerpc:next 17/110] arch/powerpc/kernel/fadump.c:513:18: warning: variable 'mem_boundary' set but not used   kbuild test robot
• [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Shengjiu Wang
  • [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Lucas Stach
    • [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Shengjiu Wang
      • [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Lucas Stach
      • [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Shengjiu Wang
      • [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Mark Brown
      • [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Shengjiu Wang
      • [PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe   Mark Brown
• [powerpc:next 108/110] kernel/events/hw_breakpoint.c:216:12: warning: no previous prototype for function 'arch_reserve_bp_slot'   kbuild test robot
• [RESEND PATCH v7 0/5] powerpc/papr_scm: Add support for reporting nvdimm health   Vaibhav Jain
  • [RESEND PATCH v7 1/5] powerpc: Document details on H_SCM_HEALTH hcall   Vaibhav Jain
  • [RESEND PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Vaibhav Jain
    • [RESEND PATCH v7 2/5] seq_buf: Export seq_buf_printf() to external modules   Christoph Hellwig
  • [RESEND PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Vaibhav Jain
    • [RESEND PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Ira Weiny
      • [RESEND PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Vaibhav Jain
      • [RESEND PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Michael Ellerman
      • [RESEND PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Vaibhav Jain
      • [RESEND PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Ira Weiny
  • [RESEND PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
    • [RESEND PATCH v7 4/5] ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods   Aneesh Kumar K.V
      • [RESEND PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
    • [RESEND PATCH v7 4/5] ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods   Ira Weiny
      • [RESEND PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
      • [RESEND PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Michael Ellerman
      • [RESEND PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
      • [RESEND PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
      • [RESEND PATCH v7 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Michael Ellerman
  • [RESEND PATCH v7 5/5] powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_HEALTH   Vaibhav Jain
• [PATCH 1/2] selftests/powerpc: Allow choice of CI memory location in alignment_handler test   Jordan Niethe
  • [PATCH 2/2] selftests/powerpc: Add prefixed loads/stores to alignment_handler test   Jordan Niethe
• Endless soft-lockups for compiling workload since next-20200519   Qian Cai
  • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
    • Endless soft-lockups for compiling workload since next-20200519   Qian Cai
    • Endless soft-lockups for compiling workload since next-20200519   Frederic Weisbecker
      • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
      • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
      • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
      • Endless soft-lockups for compiling workload since next-20200519   Frederic Weisbecker
      • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
      • Endless soft-lockups for compiling workload since next-20200519   Frederic Weisbecker
      • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
      • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
      • Endless soft-lockups for compiling workload since next-20200519   Qian Cai
      • Endless soft-lockups for compiling workload since next-20200519   Peter Zijlstra
• [RFC PATCH v0 0/5] powerpc/mm/radix: Memory unplug fixes   Bharata B Rao
• [PATCH v2] tty: hvc: Fix data abort due to race in hvc_open   Raghavendra Rao Ananta
  • [PATCH v2] tty: hvc: Fix data abort due to race in hvc_open   Jiri Slaby
    • [PATCH v2] tty: hvc: Fix data abort due to race in hvc_open   rananta at codeaurora.org
• [PATCH v4 0/6] Memory corruption may occur due to incorrent tlb flush   Santosh Sivaraj
  • [PATCH v4 1/6] asm-generic/tlb: Track freeing of page-table directories in struct mmu_gather   Santosh Sivaraj
  • [PATCH v4 2/6] asm-generic/tlb: Track which levels of the page tables have been cleared   Santosh Sivaraj
  • [PATCH v4 3/6] asm-generic/tlb, arch: Invert CONFIG_HAVE_RCU_TABLE_INVALIDATE   Santosh Sivaraj
    • [PATCH v4 3/6] asm-generic/tlb, arch: Invert CONFIG_HAVE_RCU_TABLE_INVALIDATE   Greg KH
  • [PATCH v4 4/6] powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case   Santosh Sivaraj
  • [PATCH v4 5/6] mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush   Santosh Sivaraj
  • [PATCH v4 6/6] asm-generic/tlb: avoid potential double flush   Santosh Sivaraj
• [PATCH -next] scsi: ibmvscsi: Make some functions static   Chen Tao
  • [PATCH -next] scsi: ibmvscsi: Make some functions static   Martin K. Petersen
• [v2 1/2] dts: ppc: t4240rdb: remove interrupts property   Biwen Li
  • [v2 1/2] dts: ppc: t4240rdb: remove interrupts property   Li Yang
• [v2 2/2] dts: ppc: t1024rdb: remove interrupts property   Biwen Li
  • [v2 2/2] dts: ppc: t1024rdb: remove interrupts property   Li Yang
• [PATCH V3 0/2] powerpc/perf: Add support for perf extended regs in powerpc   Athira Rajeev
  • [PATCH V3 1/2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Athira Rajeev
    • [PATCH V3 1/2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Madhavan Srinivasan
  • [PATCH V3 2/2] tools/perf: Add perf tools support for extended register capability in powerpc   Athira Rajeev
    • [PATCH V3 2/2] tools/perf: Add perf tools support for extended register capability in powerpc   Madhavan Srinivasan
• [PATCH] Revert "powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits."   Christophe Leroy
  • [PATCH] Revert "powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits."   Michael Ellerman
• [PATCH 1/5] drivers/powerpc: Replace _ALIGN_UP() by ALIGN()   Michael Ellerman
• [PATCH] powerpc/kasan: Fix stack overflow by increasing THREAD_SHIFT   Michael Ellerman
• [PATCH] drivers/macintosh: Fix memleak in windfarm_pm112 driver   Michael Ellerman
• [PATCH] powerpc/64: Don't initialise init_task->thread.regs   Michael Ellerman
• [PATCH] powerpc: Drop unneeded cast in task_pt_regs()   Michael Ellerman
• [PATCH] selftests/powerpc: Add a test of counting larx/stcx   Michael Ellerman
• [PATCH v2] powerpc/64: Update Speculation_Store_Bypass in /proc/<pid>/status   Michael Ellerman
• [PATCH v4 0/2] powerpc/eeh: Release EEH device state synchronously   Michael Ellerman
• [PATCH] powerpc/xmon: Show task->thread.regs in process display   Michael Ellerman
• [PATCH] powerpc: Add ppc_inst_next()   Michael Ellerman
  • [PATCH] powerpc: Add ppc_inst_next()   Jordan Niethe
    • [PATCH] powerpc: Add ppc_inst_next()   Christophe Leroy
• [PATCH] powerpc/configs/64s: Enable CONFIG_PRINTK_CALLER   Michael Ellerman
• [PATCH] powerpc/64s: Disable STRICT_KERNEL_RWX   Michael Ellerman
  • [PATCH] powerpc/64s: Disable STRICT_KERNEL_RWX   Michael Ellerman
• [PATCH] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Valentin Longchamp
  • [PATCH] net/ethernet/freescale: rework quiesce/activate for ucc_geth   David Miller
    • [PATCH] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Valentin Longchamp
• [PATCH] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Laurent Dufour
  • [PATCH] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Greg Kurz
  • [PATCH] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Laurent Dufour
• [PATCH v2] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Laurent Dufour
  • [PATCH v2] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Greg Kurz
  • [PATCH v2] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Ram Pai
  • [PATCH v2] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Paul Mackerras
    • [PATCH v2] KVM: PPC: Book3S HV: relax check on H_SVM_INIT_ABORT   Laurent Dufour
• [PATCH v2 0/7] padata: parallelize deferred page init   Daniel Jordan
  • [PATCH v2 0/7] padata: parallelize deferred page init   Josh Triplett
• [PATCH v2 1/7] padata: remove exit routine   Daniel Jordan
• [PATCH v2 2/7] padata: initialize earlier   Daniel Jordan
• [PATCH v2 3/7] padata: allocate work structures for parallel jobs from a pool   Daniel Jordan
• [PATCH v2 4/7] padata: add basic support for multithreaded jobs   Daniel Jordan
• [PATCH v2 5/7] mm: parallelize deferred_init_memmap()   Daniel Jordan
  • [PATCH v2 5/7] mm: parallelize deferred_init_memmap()   Alexander Duyck
    • [PATCH v2 5/7] mm: parallelize deferred_init_memmap()   Alexander Duyck
      • [PATCH v2 5/7] mm: parallelize deferred_init_memmap()   Daniel Jordan
    • [PATCH v2 5/7] mm: parallelize deferred_init_memmap()   Daniel Jordan
      • [PATCH v2 5/7] mm: parallelize deferred_init_memmap()   Alexander Duyck
      • [PATCH v2 5/7] mm: parallelize deferred_init_memmap()   Daniel Jordan
• [PATCH v2 6/7] mm: make deferred init's max threads arch-specific   Daniel Jordan
• [PATCH v2 7/7] padata: document multithreaded jobs   Daniel Jordan
• [PATCH v6 01/11] PCI: designware-ep: Add multiple PFs support for DWC   Rob Herring
• [PATCH v6 04/11] PCI: designware-ep: Modify MSI and MSIX CAP way of finding   Rob Herring
• [PATCH v6 07/11] PCI: layerscape: Modify the way of getting capability with different PEX   Rob Herring
• [PATCH v6 09/11] PCI: layerscape: Add EP mode support for ls1088a and ls2088a   Rob Herring
• [PATCH v3 0/7] Base support for POWER10   Alistair Popple
  • [PATCH v3 1/7] powerpc: Add new HWCAP bits   Alistair Popple
  • [PATCH v3 2/7] powerpc: Add support for ISA v3.1   Alistair Popple
  • [PATCH v3 3/7] powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected   Alistair Popple
  • [PATCH v3 4/7] powerpc/dt_cpu_ftrs: Set current thread fscr bits   Alistair Popple
  • [PATCH v3 5/7] powerpc/dt_cpu_ftrs: Enable Prefixed Instructions   Alistair Popple
  • [PATCH v3 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Alistair Popple
    • [PATCH v3 6/7] powerpc/dt_cpu_ftrs: Add MMA feature   Paul A. Clarke
  • [PATCH v3 7/7] powerpc: Add POWER10 architected mode   Alistair Popple
• [PATCH 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms   Michael Ellerman
  • [PATCH 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms   Christophe Leroy
    • [PATCH 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms   Michael Ellerman
      • [PATCH 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms   Michal Simek
• [PATCH 2/3] powerpc/pci: unmap legacy INTx interrupts of passthrough IO adapters   Cédric Le Goater
  • [PATCH 2/3] powerpc/pci: unmap legacy INTx interrupts of passthrough IO adapters   Oliver O'Halloran
    • [PATCH 2/3] powerpc/pci: unmap legacy INTx interrupts of passthrough IO adapters   Cédric Le Goater
  • [PATCH 2/3] powerpc/pci: unmap legacy INTx interrupts of passthrough IO adapters   Cédric Le Goater
    • [PATCH 2/3] powerpc/pci: unmap legacy INTx interrupts of passthrough IO adapters   Michael Ellerman
• [PATCH] powerpc/4xx: Don't unmap NULL mbase   Michael Ellerman
• [PATCH v5 00/13] Modernise powerpc 40x   Christophe Leroy
  • [PATCH v5 05/13] powerpc/40x: Remove STB03xxx   Christophe Leroy
  • [PATCH v5 06/13] powerpc/40x: Remove WALNUT   Christophe Leroy
  • [PATCH v5 07/13] powerpc/40x: Remove EP405   Christophe Leroy
  • [PATCH v5 10/13] powerpc/40x: Remove IBM405 Erratum #51   Christophe Leroy
  • [PATCH v5 11/13] powerpc: Remove IBM405 Erratum #77   Christophe Leroy
  • [PATCH v5 12/13] powerpc/40x: Avoid using r12 in TLB miss handlers   Christophe Leroy
  • [PATCH v5 13/13] powerpc/40x: Don't save CR in SPRN_SPRG_SCRATCH6   Christophe Leroy
• [PATCH v5 01/13] powerpc: Remove Xilinx PPC405/PPC440 support   Christophe Leroy
• [PATCH v5 02/13] powerpc/40x: Rework 40x PTE access and TLB miss   Christophe Leroy
• [PATCH v5 03/13] powerpc/pgtable: Drop PTE_ATOMIC_UPDATES   Christophe Leroy
• [PATCH v5 04/13] powerpc/40x: Remove support for IBM 403GCX   Christophe Leroy
• [PATCH v5 08/13] powerpc/40x: Remove support for ISS Simulator   Christophe Leroy
• [PATCH v5 09/13] powerpc/40x: Remove support for IBM 405GP   Christophe Leroy
• [PATCH V3 0/3] arm64: Enable vmemmap mapping from device memory   Jia He
• [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume   Shengjiu Wang
  • [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume   Nicolin Chen
    • [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume   Shengjiu Wang
      • [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume   Nicolin Chen
  • [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume   Nicolin Chen
  • [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume   Mark Brown
• [powerpc:fixes-test] BUILD SUCCESS 8659a0e0efdd975c73355dbc033f79ba3b31e82c   kbuild test robot
• [PATCH v2] powerpc: Add ppc_inst_next()   Michael Ellerman
  • [PATCH v2] powerpc: Add ppc_inst_next()   Nicholas Piggin
    • [PATCH v2] powerpc: Add ppc_inst_next()   Nicholas Piggin
      • [PATCH v2] powerpc: Add ppc_inst_next()   Michael Ellerman
  • [PATCH v2] powerpc: Add ppc_inst_next()   Jordan Niethe
• [GIT PULL] Please pull powerpc/linux.git powerpc-5.7-5 tag   Michael Ellerman
  • [GIT PULL] Please pull powerpc/linux.git powerpc-5.7-5 tag   pr-tracker-bot at kernel.org
• [PATCH] kbuild: reuse vmlinux.o in vmlinux_link   Masahiro Yamada
  • [PATCH] kbuild: reuse vmlinux.o in vmlinux_link   Nicholas Piggin
    • [PATCH] kbuild: reuse vmlinux.o in vmlinux_link   Masahiro Yamada
      • [PATCH] kbuild: reuse vmlinux.o in vmlinux_link   Sam Ravnborg
      • [PATCH] kbuild: reuse vmlinux.o in vmlinux_link   Masahiro Yamada
• [PATCH] usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()   Li Yang
• [PATCH] soc: fsl: qe: clean up an indentation issue   Li Yang
• [linux-next RFC] mm/gup.c: Convert to use get_user_pages_fast_only()   Souptick Joarder
  • [linux-next RFC] mm/gup.c: Convert to use get_user_pages_fast_only()   Matthew Wilcox
    • [linux-next RFC] mm/gup.c: Convert to use get_user_pages_fast_only()   Souptick Joarder
      • [linux-next RFC] mm/gup.c: Convert to use get_user_pages_fast_only()   John Hubbard
• Kernel bug in 5.7 for PPC32 on PowerBook G4 - bisected to commit 697ece7   Larry Finger
  • Kernel bug in 5.7 for PPC32 on PowerBook G4 - bisected to commit 697ece7   Christophe Leroy
    • Kernel bug in 5.7 for PPC32 on PowerBook G4 - bisected to commit 697ece7   Larry Finger
• [Bug 207873] New: BUG at swapops + rcu stall + soft lockup at running btrfs test suite (TEST=013\* ./misc-tests.sh)   bugzilla-daemon at bugzilla.kernel.org
  • [Bug 207873] BUG at swapops + rcu stall + soft lockup at running btrfs test suite (TEST=013\* ./misc-tests.sh)   bugzilla-daemon at bugzilla.kernel.org
  • [Bug 207873] BUG at swapops + rcu stall + soft lockup at running btrfs test suite (TEST=013\* ./misc-tests.sh)   bugzilla-daemon at bugzilla.kernel.org
  • [Bug 207873] BUG at swapops + rcu stall + soft lockup at running btrfs test suite (TEST=013\* ./misc-tests.sh)   bugzilla-daemon at bugzilla.kernel.org
  • [Bug 207873] BUG at swapops + rcu stall + soft lockup at running btrfs test suite (TEST=013\* ./misc-tests.sh)   bugzilla-daemon at bugzilla.kernel.org
  • [Bug 207873] BUG at swapops + rcu stall + soft lockup at running btrfs test suite (TEST=013\* ./misc-tests.sh)   bugzilla-daemon at bugzilla.kernel.org
  • [Bug 207873] BUG at swapops + rcu stall + soft lockup at running btrfs test suite (TEST=013\* ./misc-tests.sh)   bugzilla-daemon at bugzilla.kernel.org
• [linux-next RFC v2] mm/gup.c: Convert to use get_user_{page|pages}_fast_only()   Souptick Joarder
  • [linux-next RFC v2] mm/gup.c: Convert to use get_user_{page|pages}_fast_only()   John Hubbard
    • [linux-next RFC v2] mm/gup.c: Convert to use get_user_{page|pages}_fast_only()   Souptick Joarder
• [PATCH v3 0/3] vmalloc kernel mapping and relocatable kernel   Alexandre Ghiti
• [PATCH v3 1/3] riscv: Move kernel mapping to vmalloc zone   Alexandre Ghiti
  • [PATCH v3 1/3] riscv: Move kernel mapping to vmalloc zone   Zong Li
    • [PATCH v3 1/3] riscv: Move kernel mapping to vmalloc zone   Alex Ghiti
      • [PATCH v3 1/3] riscv: Move kernel mapping to vmalloc zone   Zong Li
      • [PATCH v3 1/3] riscv: Move kernel mapping to vmalloc zone   Alex Ghiti
      • [PATCH v3 1/3] riscv: Move kernel mapping to vmalloc zone   Alex Ghiti
  • [PATCH v3 1/3] riscv: Move kernel mapping to vmalloc zone   kbuild test robot
• [PATCH v3 2/3] riscv: Introduce CONFIG_RELOCATABLE   Alexandre Ghiti
  • [PATCH v3 2/3] riscv: Introduce CONFIG_RELOCATABLE   Zong Li
  • [PATCH v3 2/3] riscv: Introduce CONFIG_RELOCATABLE   Anup Patel
• [PATCH v3 3/3] arch, scripts: Add script to check relocations at compile time   Alexandre Ghiti
  • [PATCH v3 3/3] arch, scripts: Add script to check relocations at compile time   Anup Patel
• [PATCH v2 1/4] powerpc/instruction_dump: Fix kernel crash with show_instructions   Aneesh Kumar K.V
  • [PATCH v2 2/4] powerpc/va: Add a __va() variant that doesn't do input validation   Aneesh Kumar K.V
  • [PATCH v2 3/4] powerpc: Fix instruction dumping to use address value correctly   Aneesh Kumar K.V
  • [PATCH v2 4/4] powerpc: Avoid opencoding fixup_real_addr   Aneesh Kumar K.V
• [PATCH 1/5] powerpc sstep: Add tests for prefixed integer load/stores   Jordan Niethe
  • [PATCH 2/5] powerpc sstep: Add tests for prefixed floating-point load/stores   Jordan Niethe
  • [PATCH 3/5] powerpc sstep: Set NIP in instruction emulation tests   Jordan Niethe
  • [PATCH 4/5] powerpc sstep: Let compute tests specify a required cpu feature   Jordan Niethe
  • [PATCH 5/5] powerpc sstep: Add tests for Prefixed Add Immediate   Jordan Niethe
• [powerpc:merge] BUILD SUCCESS 1ef93962cf4293ec9e1bb3163cc4b7dcfc3de84f   kbuild test robot
• [PATCH] powerpc: Add ppc_inst_as_u64()   Michael Ellerman
  • [PATCH] powerpc: Add ppc_inst_as_u64()   Jordan Niethe
• [linux-next PATCH] mm/gup.c: Convert to use get_user_{page|pages}_fast_only()   Souptick Joarder
  • [linux-next PATCH] mm/gup.c: Convert to use get_user_{page|pages}_fast_only()   Paul Mackerras
    • [linux-next PATCH] mm/gup.c: Convert to use get_user_{page|pages}_fast_only()   Souptick Joarder
• [PATCH] ASoC: fsl_asrc: Fix -Wmissing-prototypes warning   Shengjiu Wang
  • [PATCH] ASoC: fsl_asrc: Fix -Wmissing-prototypes warning   Mark Brown
• [PATCH v2 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms   Michal Simek
  • [PATCH v2 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms   Michael Ellerman
• [PATCH v10 0/5] powerpc/hv-24x7: Expose chip/sockets info to add json file metric support for the hv_24x7 socket/chip level events   Kajol Jain
  • [PATCH v10 1/5] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run   Kajol Jain
  • [PATCH v10 2/5] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details   Kajol Jain
  • [PATCH v10 3/5] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show processor details   Kajol Jain
  • [PATCH v10 4/5] Documentation/ABI: Add ABI documentation for chips and sockets   Kajol Jain
  • [PATCH v10 5/5] powerpc/pseries: Update hv-24x7 information after migration   Kajol Jain
• [PATCH] ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed   Xiyu Yang
  • [PATCH] ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed   Mark Brown
• [PATCH] ASoC: fsl: imx-audmix: Fix unused assignment to variable 'ret'   Mark Brown
• [PATCH v4 3/7] KVM: PPC: Remove redundant kvm_run from vcpu_arch   Paul Mackerras
  • [PATCH v4 3/7] KVM: PPC: Remove redundant kvm_run from vcpu_arch   Paul Mackerras
    • [PATCH v4 3/7] KVM: PPC: Remove redundant kvm_run from vcpu_arch   Tianjia Zhang
• [PATCH v4 4/7] KVM: PPC: clean up redundant 'kvm_run' parameters   Paul Mackerras
• [PATCH v4 5/7] KVM: PPC: clean up redundant kvm_run parameters in assembly   Paul Mackerras
• [PATCH] powerpc/64s: Fix restore of NV GPRs after facility unavailable exception   Michael Ellerman
  • [PATCH] powerpc/64s: Fix restore of NV GPRs after facility unavailable exception   Michael Ellerman
• [PATCH] powerpc/64: Remove unused generic_secondary_thread_init()   Michael Ellerman
  • [PATCH] powerpc/64: Remove unused generic_secondary_thread_init()   Jordan Niethe
    • [PATCH] powerpc/64: Remove unused generic_secondary_thread_init()   Michael Ellerman
• [PATCH v2] powerpc: Add ppc_inst_as_u64()   Michael Ellerman
• [RFC PATCH v2 7/7] powerpc/selftest: reuse ppc-opcode macros to avoid redundancy   Balamuruhan S
• [PATCH 0/6] consolidate PowerPC instruction encoding macros   Balamuruhan S
  • [PATCH 1/6] powerpc/ppc-opcode: introduce PPC_RAW_* macros for base instruction encoding   Balamuruhan S
  • [PATCH 2/6] powerpc/ppc-opcode: move ppc instruction encoding from test_emulate_step   Balamuruhan S
  • [PATCH 3/6] powerpc/bpf_jit: reuse instruction macros from ppc-opcode.h   Balamuruhan S
  • [PATCH 4/6] powerpc/ppc-opcode: consolidate powerpc instructions from bpf_jit.h   Balamuruhan S
  • [PATCH 5/6] powerpc/ppc-opcode: reuse raw instruction macros to stringify   Balamuruhan S
  • [PATCH 6/6] powerpc/ppc-opcode: fold PPC_INST_* macros into PPC_RAW_* macros   Balamuruhan S
• [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Emanuele Giuseppe Esposito
  • [PATCH v3 1/7] stats_fs API: create, add and remove stats_fs sources and values   Emanuele Giuseppe Esposito
  • [PATCH v3 2/7] documentation for stats_fs   Emanuele Giuseppe Esposito
  • [PATCH v3 3/7] kunit: tests for stats_fs API   Emanuele Giuseppe Esposito
    • [PATCH v3 3/7] kunit: tests for stats_fs API   Alan Maguire
      • [PATCH v3 3/7] kunit: tests for stats_fs API   Emanuele Giuseppe Esposito
  • [PATCH v3 4/7] stats_fs fs: virtual fs to show stats to the end-user   Emanuele Giuseppe Esposito
  • [PATCH v3 5/7] kvm_main: replace debugfs with stats_fs   Emanuele Giuseppe Esposito
  • [PATCH v3 6/7] [not for merge] kvm: example of stats_fs_value show function   Emanuele Giuseppe Esposito
  • [PATCH v3 7/7] [not for merge] netstats: example use of stats_fs API   Emanuele Giuseppe Esposito
    • [PATCH v3 7/7] [not for merge] netstats: example use of stats_fs API   Andrew Lunn
      • [PATCH v3 7/7] [not for merge] netstats: example use of stats_fs API   Emanuele Giuseppe Esposito
  • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Jakub Kicinski
    • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Emanuele Giuseppe Esposito
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Andrew Lunn
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Paolo Bonzini
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Jakub Kicinski
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Paolo Bonzini
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Jakub Kicinski
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Paolo Bonzini
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   David Ahern
      • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Paolo Bonzini
  • [PATCH v3 0/7] Statsfs: a new ram-based file system for Linux kernel statistics   Andrew Lunn
• powerpc/pci: [PATCH 1/1 V3] PCIE PHB reset   wenxiong at linux.vnet.ibm.com
  • powerpc/pci: [PATCH 1/1 V3] PCIE PHB reset   Oliver O'Halloran
  • powerpc/pci: [PATCH 1/1 V3] PCIE PHB reset   Sam Bobroff
• [PATCH v2 03/20] mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option   Catalin Marinas
• [PATCH v2 05/20] mm: use free_area_init() instead of free_area_init_nodes()   Catalin Marinas
• [PATCH v2 08/20] arm64: simplify detection of memory zone boundaries for UMA configs   Catalin Marinas
• [PATCH] KVM: PPC: Book3S HV: read ibm,secure-memory nodes   Laurent Dufour
  • [PATCH] KVM: PPC: Book3S HV: read ibm,secure-memory nodes   Paul Mackerras
• [PATCH v2] powerpc/wii: Fix declaration made after definition   Nathan Chancellor
  • [PATCH v2] powerpc/wii: Fix declaration made after definition   Michael Ellerman
• [PATCH v2] selftests: powerpc: Add test for execute-disabled pkeys   Sandipan Das
  • [PATCH v2] selftests: powerpc: Add test for execute-disabled pkeys   Michael Ellerman
• [v3 1/2] dts: ppc: t4240rdb: remove interrupts property   Biwen Li
  • [v3 2/2] dts: ppc: t1024rdb: remove interrupts property   Biwen Li
    • [v3 2/2] dts: ppc: t1024rdb: remove interrupts property   Li Yang
  • [v3 1/2] dts: ppc: t4240rdb: remove interrupts property   Li Yang
• [PATCH v3] powerpc/XIVE: SVM: share the event-queue page with the Hypervisor.   Michael Ellerman
• [PATCH v8 0/5] powerpc/papr_scm: Add support for reporting nvdimm health   Vaibhav Jain
  • [PATCH v8 1/5] powerpc: Document details on H_SCM_HEALTH hcall   Vaibhav Jain
    • [PATCH v8 1/5] powerpc: Document details on H_SCM_HEALTH hcall   Dan Williams
      • [PATCH v8 1/5] powerpc: Document details on H_SCM_HEALTH hcall   Vaibhav Jain
  • [PATCH v8 2/5] seq_buf: Export seq_buf_printf   Vaibhav Jain
  • [PATCH v8 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Vaibhav Jain
    • [PATCH v8 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Aneesh Kumar K.V
  • [PATCH v8 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
    • [PATCH v8 4/5] ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods   Aneesh Kumar K.V
  • [PATCH v8 5/5] powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_HEALTH   Vaibhav Jain
    • [PATCH v8 5/5] powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_HEALTH   Aneesh Kumar K.V
• [PATCH -next] KVM: PPC: Book3S HV: remove redundant NULL check   Paul Mackerras
• [PATCH v4 6/7] KVM: MIPS: clean up redundant 'kvm_run' parameters   Tianjia Zhang
  • [PATCH v4 6/7] KVM: MIPS: clean up redundant 'kvm_run' parameters   Paolo Bonzini
• [PATCH] powerpc/fadump: account for memory_limit while reserving memory   Hari Bathini
• [PATCH V4 0/2] powerpc/perf: Add support for perf extended regs in powerpc   Athira Rajeev
  • [PATCH V4 1/2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Athira Rajeev
    • [PATCH V4 1/2] powerpc/perf: Add support for outputting extended regs in perf intr_regs   Nageswara R Sastry
  • [PATCH V4 2/2] tools/perf: Add perf tools support for extended register capability in powerpc   Athira Rajeev
    • [PATCH V4 2/2] tools/perf: Add perf tools support for extended register capability in powerpc   Nageswara R Sastry
• [PATCH] powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again   Petr Mladek
  • [PATCH] powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again   Michael Ellerman
    • [PATCH] powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again   Petr Mladek
      • [PATCH] powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again   Michael Ellerman
      • [PATCH] powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again   Daniel Borkmann
      • [PATCH] powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again   Michael Ellerman
• [RFC PATCH 1/4] powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()   Michael Ellerman
  • [RFC PATCH 2/4] powerpc/64s: Don't let DT CPU features set FSCR_DSCR   Michael Ellerman
  • [RFC PATCH 3/4] powerpc/64s: Save FSCR to init_task.thread.fscr after feature init   Michael Ellerman
  • [RFC PATCH 4/4] powerpc/64s: Don't set FSCR bits in INIT_THREAD   Michael Ellerman
  • [RFC PATCH 1/4] powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()   Nicholas Piggin
  • [RFC PATCH 1/4] powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()   Alistair Popple
• [PATCH v3 0/8] padata: parallelize deferred page init   Daniel Jordan
  • [PATCH v3 1/8] padata: remove exit routine   Daniel Jordan
  • [PATCH v3 3/8] padata: allocate work structures for parallel jobs from a pool   Daniel Jordan
  • [PATCH v3 5/8] mm: don't track number of pages during deferred initialization   Daniel Jordan
    • [PATCH v3 5/8] mm: don't track number of pages during deferred initialization   Alexander Duyck
  • [PATCH v3 6/8] mm: parallelize deferred_init_memmap()   Daniel Jordan
    • [PATCH v3 6/8] mm: parallelize deferred_init_memmap()   Alexander Duyck
  • [PATCH v3 7/8] mm: make deferred init's max threads arch-specific   Daniel Jordan
  • [PATCH v3 8/8] padata: document multithreaded jobs   Daniel Jordan
• [PATCH v3 2/8] padata: initialize earlier   Daniel Jordan
• [PATCH v3 4/8] padata: add basic support for multithreaded jobs   Daniel Jordan
• [PATCH v5] KVM: PPC: clean up redundant kvm_run parameters in assembly   Tianjia Zhang
• [PATCH] powerpc/book3s64/kvm: Fix secondary page table walk warning during migration   Aneesh Kumar K.V
  • [PATCH] powerpc/book3s64/kvm: Fix secondary page table walk warning during migration   Michael Ellerman
    • [PATCH] powerpc/book3s64/kvm: Fix secondary page table walk warning during migration   Aneesh Kumar K.V
• [PATCH] powerpc/32: disable KASAN with pages bigger than 16k   Christophe Leroy
  • [PATCH] powerpc/32: disable KASAN with pages bigger than 16k   Christophe Leroy
• [PATCH AUTOSEL 5.6 30/47] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Sasha Levin
• [PATCH AUTOSEL 5.4 15/26] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Sasha Levin
• [PATCH AUTOSEL 4.19 12/17] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Sasha Levin
• [PATCH AUTOSEL 4.14 08/13] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Sasha Levin
• [PATCH AUTOSEL 4.9 5/9] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Sasha Levin
• [PATCH AUTOSEL 4.4 4/7] net/ethernet/freescale: rework quiesce/activate for ucc_geth   Sasha Levin
• [PATCH net] drivers/net/ibmvnic: Update VNIC protocol version reporting   Thomas Falcon
  • [PATCH net] drivers/net/ibmvnic: Update VNIC protocol version reporting   David Miller
• [PATCH] powerpc: Fix misleading small cores print   Michael Neuling
• [powerpc:next-test] BUILD SUCCESS bc26d22277c297c35013700e40f276e37b991980   kbuild test robot
• [PATCH] powerpc/nvram: Replace kmalloc with kzalloc in the error message   Yi Wang
  • [PATCH] powerpc/nvram: Replace kmalloc with kzalloc in the error message   Michael Ellerman
  • [PATCH] powerpc/nvram: Replace kmalloc with kzalloc in the error message   Markus Elfring
• [PATCH v2 1/5] uaccess: Add user_read_access_begin/end and user_write_access_begin/end   Michael Ellerman
• [PATCH v2 2/5] uaccess: Selectively open read or write user access   Michael Ellerman
• [PATCH v2 3/5] drm/i915/gem: Replace user_access_begin by user_write_access_begin   Michael Ellerman
• [PATCH v2 4/5] powerpc/uaccess: Implement user_read_access_begin and user_write_access_begin   Michael Ellerman
• [PATCH v4 2/2] powerpc/uaccess: Implement unsafe_copy_to_user() as a simple loop   Michael Ellerman
• [PATCH v4 0/8] Support new pmem flush and sync instructions for POWER   Aneesh Kumar K.V
  • [PATCH v4 1/8] powerpc/pmem: Restrict papr_scm to P8 and above.   Aneesh Kumar K.V
  • [PATCH v4 2/8] powerpc/pmem: Add new instructions for persistent storage and sync   Aneesh Kumar K.V
  • [PATCH v4 3/8] powerpc/pmem: Add flush routines using new pmem store and sync instruction   Aneesh Kumar K.V
  • [PATCH v4 4/8] libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier   Aneesh Kumar K.V
  • [PATCH v4 5/8] powerpc/pmem/of_pmem: Update of_pmem to use the new barrier instruction.   Aneesh Kumar K.V
  • [PATCH v4 6/8] powerpc/pmem: Avoid the barrier in flush routines   Aneesh Kumar K.V
  • [PATCH v4 7/8] powerpc/book3s/pmem: Add WARN_ONCE to catch the wrong usage of pmem flush functions.   Aneesh Kumar K.V
  • [PATCH v4 8/8] powerpc/pmem: Initialize pmem device on newer hardware   Aneesh Kumar K.V
• [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Aneesh Kumar K.V
  • [RFC PATCH 2/2] powerpc/pmem: Disable synchronous fault by default.   Aneesh Kumar K.V
  • [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Michal Suchánek
    • [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Aneesh Kumar K.V
      • [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Jan Kara
      • [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Aneesh Kumar K.V
      • [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Dan Williams
      • [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Aneesh Kumar K.V
      • [RFC PATCH 1/2] libnvdimm: Add prctl control for disabling synchronous fault support.   Dan Williams
• [PATCH] powerpc/64/syscall: Disable sanitisers for C syscall entry/exit code   Daniel Axtens
  • [PATCH] powerpc/64/syscall: Disable sanitisers for C syscall entry/exit code   Andrew Donnellan
    • [PATCH] powerpc/64/syscall: Disable sanitisers for C syscall entry/exit code   Michael Ellerman
• [PATCH 00/13] sysctl: spring cleaning   Luis Chamberlain
  • [PATCH 01/13] sysctl: add new register_sysctl_subdir() helper   Luis Chamberlain
    • [PATCH 01/13] sysctl: add new register_sysctl_subdir() helper   Jani Nikula
      • [PATCH 01/13] sysctl: add new register_sysctl_subdir() helper   Luis Chamberlain
    • [PATCH 01/13] sysctl: add new register_sysctl_subdir() helper   Eric W. Biederman
      • [PATCH 01/13] sysctl: add new register_sysctl_subdir() helper   Eric W. Biederman
  • [PATCH 02/13] cdrom: use new sysctl subdir helper register_sysctl_subdir()   Luis Chamberlain
    • [PATCH 02/13] cdrom: use new sysctl subdir helper register_sysctl_subdir()   Eric W. Biederman
  • [PATCH 03/13] hpet: use new sysctl subdir helper register_sysctl_subdir()   Luis Chamberlain
  • [PATCH 04/13] i915: use new sysctl subdir helper register_sysctl_subdir()   Luis Chamberlain
  • [PATCH 05/13] macintosh/mac_hid.c: use new sysctl subdir helper register_sysctl_subdir()   Luis Chamberlain
  • [PATCH 06/13] ocfs2: use new sysctl subdir helper register_sysctl_subdir()   Luis Chamberlain
    • [PATCH 06/13] ocfs2: use new sysctl subdir helper register_sysctl_subdir()   Kees Cook
      • [Intel-gfx] [PATCH 06/13] ocfs2: use new sysctl subdir helper register_sysctl_subdir()   Luis Chamberlain
      • [Intel-gfx] [PATCH 06/13] ocfs2: use new sysctl subdir helper register_sysctl_subdir()   Kees Cook
  • [PATCH 07/13] test_sysctl: use new sysctl subdir helper register_sysctl_subdir()   Luis Chamberlain
  • [PATCH 08/13] inotify: simplify sysctl declaration with register_sysctl_subdir()   Luis Chamberlain
  • [PATCH 09/13] firmware_loader: simplify sysctl declaration with register_sysctl_subdir()   Luis Chamberlain
    • [PATCH 09/13] firmware_loader: simplify sysctl declaration with register_sysctl_subdir()   Greg KH
      • [PATCH 09/13] firmware_loader: simplify sysctl declaration with register_sysctl_subdir()   Xiaoming Ni
      • [PATCH 09/13] firmware_loader: simplify sysctl declaration with register_sysctl_subdir()   Luis Chamberlain
  • [PATCH 10/13] eventpoll: simplify sysctl declaration with register_sysctl_subdir()   Luis Chamberlain
  • [PATCH 11/13] random: simplify sysctl declaration with register_sysctl_subdir()   Luis Chamberlain
    • [PATCH 11/13] random: simplify sysctl declaration with register_sysctl_subdir()   Greg KH
      • [PATCH 11/13] random: simplify sysctl declaration with register_sysctl_subdir()   Xiaoming Ni
  • [PATCH 12/13] sysctl: add helper to register empty subdir   Luis Chamberlain
    • [PATCH 12/13] sysctl: add helper to register empty subdir   Kees Cook
    • [PATCH 12/13] sysctl: add helper to register empty subdir   Eric W. Biederman
  • [PATCH 13/13] fs: move binfmt_misc sysctl to its own file   Luis Chamberlain
    • [PATCH 13/13] fs: move binfmt_misc sysctl to its own file   Kees Cook
• [PATCH] powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG   Christophe Leroy
  • [PATCH] powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG   Christophe Leroy
• [PATCH v8 0/8] powerpc: switch VDSO to C implementation   Christophe Leroy
• ppc64le and 32-bit LE userland compatibility   Will Springer
  • ppc64le and 32-bit LE userland compatibility   Christophe Leroy
    • ppc64le and 32-bit LE userland compatibility   Will Springer
  • ppc64le and 32-bit LE userland compatibility   Segher Boessenkool
    • ppc64le and 32-bit LE userland compatibility   Will Springer
• [musl] ppc64le and 32-bit LE userland compatibility   Rich Felker
  • [musl] ppc64le and 32-bit LE userland compatibility   Will Springer
• [PATCH v3 0/5] lockdep: Change IRQ state tracking to use per-cpu variables   Peter Zijlstra
• [RFC][PATCH v3 1/5] sparc64: Fix asm/percpu.h build error   Peter Zijlstra
  • [RFC][PATCH v3 1/5] sparc64: Fix asm/percpu.h build error   David Miller
• [PATCH v3 2/5] powerpc64: Break asm/percpu.h vs spinlock_types.h dependency   Peter Zijlstra
• [PATCH v3 3/5] s390: Break cyclic percpu include   Peter Zijlstra
• [PATCH v3 4/5] lockdep: Change hardirq{s_enabled, _context} to per-cpu variables   Peter Zijlstra
• [PATCH v3 5/5] lockdep: Remove lockdep_hardirq{s_enabled, _context}() argument   Peter Zijlstra
• [PATCH v9 0/5] powerpc/papr_scm: Add support for reporting nvdimm health   Vaibhav Jain
  • [PATCH v9 1/5] powerpc: Document details on H_SCM_HEALTH hcall   Vaibhav Jain
  • [PATCH v9 2/5] seq_buf: Export seq_buf_printf   Vaibhav Jain
  • [PATCH v9 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP   Vaibhav Jain
  • [PATCH v9 4/5] ndctl/papr_scm, uapi: Add support for PAPR nvdimm specific methods   Vaibhav Jain
  • [PATCH v9 5/5] powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH   Vaibhav Jain
• [powerpc:next-test 160/198] arch/powerpc/platforms/powernv/pci-ioda.c:1889:13: warning: function 'pnv_ioda_setup_bus_dma' is not needed and will not be emitted   kbuild test robot
• [GIT PULL] Please pull powerpc/linux.git powerpc-5.7-6 tag   Michael Ellerman
  • [GIT PULL] Please pull powerpc/linux.git powerpc-5.7-6 tag   pr-tracker-bot at kernel.org
• [PATCH v2] powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG   Christophe Leroy
• [PATCH 8/8] macintosh/adb-iop: Implement SRQ autopolling   Finn Thain
  • [PATCH 8/8] macintosh/adb-iop: Implement SRQ autopolling   Geert Uytterhoeven
• [PATCH 6/8] macintosh/adb-iop: Implement idle -> sending state transition   Finn Thain
• [PATCH 0/8] Mac ADB IOP driver fixes   Finn Thain
  • [PATCH 1/8] macintosh/adb-iop: Remove dead and redundant code   Finn Thain
  • [PATCH 2/8] macintosh/adb-iop: Correct comment text   Finn Thain
  • [PATCH 3/8] macintosh/adb-iop: Adopt bus reset algorithm from via-macii driver   Finn Thain
  • [PATCH 4/8] macintosh/adb-iop: Access current_req and adb_iop_state when inside lock   Finn Thain
  • [PATCH 7/8] macintosh/adb-iop: Implement sending -> idle state transition   Finn Thain
  • [PATCH 5/8] macintosh/adb-iop: Resolve static checker warnings   Finn Thain
• [PATCH v1 0/4] Migrate non-migrated pages of a SVM.   Ram Pai
  • [PATCH v1 1/4] KVM: PPC: Book3S HV: Fix function definition in book3s_hv_uvmem.c   Ram Pai
  • [PATCH v1 2/4] KVM: PPC: Book3S HV: track shared GFNs of secure VMs   Ram Pai
  • [PATCH v1 3/4] KVM: PPC: Book3S HV: migrate remaining normal-GFNs to secure-GFNs in H_SVM_INIT_DONE   Ram Pai
  • [PATCH v1 4/4] KVM: PPC: Book3S HV: migrate hot plugged memory   Ram Pai

Last message date: Sun May 31 18:38:04 AEST 2020
Archived on: Sun May 31 18:38:23 AEST 2020

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...