[PATCH v5 12/13] powerpc/40x: Avoid using r12 in TLB miss handlers
Christophe Leroy
christophe.leroy at csgroup.eu
Fri May 22 02:56:03 AEST 2020
From: Christophe Leroy <christophe.leroy at c-s.fr>
Let's reduce the number of registers used in TLB miss handlers.
We have both r9 and r12 available for any temporary use.
r9 is enough, avoid using r12.
Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
arch/powerpc/kernel/head_40x.S | 70 ++++++++++++++++------------------
1 file changed, 33 insertions(+), 37 deletions(-)
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 75238897093d..b584e81f6d19 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -255,9 +255,9 @@ _ENTRY(saved_ksp_limit)
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
- mfspr r12, SPRN_PID
+ mfspr r9, SPRN_PID
mtspr SPRN_SPRG_SCRATCH6, r11
- mtspr SPRN_SPRG_SCRATCH5, r12
+ mtspr SPRN_SPRG_SCRATCH5, r9
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -280,12 +280,12 @@ _ENTRY(saved_ksp_limit)
4:
tophys(r11, r11)
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r12, 0(r11) /* Get L1 entry */
- andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ lwz r11, 0(r11) /* Get L1 entry */
+ andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
beq 2f /* Bail if no table */
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
+ rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r11) /* Get Linux PTE */
#ifdef CONFIG_SWAP
li r9, _PAGE_PRESENT | _PAGE_ACCESSED
#else
@@ -301,13 +301,13 @@ _ENTRY(saved_ksp_limit)
/* Create TLB tag. This is the faulting address plus a static
* set of bits. These are size, valid, E, U0.
*/
- li r12, 0x00c0
- rlwimi r10, r12, 0, 20, 31
+ li r9, 0x00c0
+ rlwimi r10, r9, 0, 20, 31
b finish_tlb_load
2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r12, 2, 22, 24
+ rlwinm. r9, r11, 2, 22, 24
beq 5f
/* Create TLB tag. This is the faulting address, plus a static
@@ -315,7 +315,6 @@ _ENTRY(saved_ksp_limit)
*/
ori r9, r9, 0x40
rlwimi r10, r9, 0, 20, 31
- mr r11, r12
b finish_tlb_load
@@ -323,9 +322,9 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r9, SPRN_SPRG_SCRATCH5
mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
+ mtspr SPRN_PID, r9
mtcr r11
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
@@ -343,9 +342,9 @@ _ENTRY(saved_ksp_limit)
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
- mfspr r12, SPRN_PID
+ mfspr r9, SPRN_PID
mtspr SPRN_SPRG_SCRATCH6, r11
- mtspr SPRN_SPRG_SCRATCH5, r12
+ mtspr SPRN_SPRG_SCRATCH5, r9
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -368,12 +367,12 @@ _ENTRY(saved_ksp_limit)
4:
tophys(r11, r11)
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r12, 0(r11) /* Get L1 entry */
- andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ lwz r11, 0(r11) /* Get L1 entry */
+ andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
beq 2f /* Bail if no table */
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
+ rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r11) /* Get Linux PTE */
#ifdef CONFIG_SWAP
li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
#else
@@ -389,13 +388,13 @@ _ENTRY(saved_ksp_limit)
/* Create TLB tag. This is the faulting address plus a static
* set of bits. These are size, valid, E, U0.
*/
- li r12, 0x00c0
- rlwimi r10, r12, 0, 20, 31
+ li r9, 0x00c0
+ rlwimi r10, r9, 0, 20, 31
b finish_tlb_load
2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r12, 2, 22, 24
+ rlwinm. r9, r11, 2, 22, 24
beq 5f
/* Create TLB tag. This is the faulting address, plus a static
@@ -403,7 +402,6 @@ _ENTRY(saved_ksp_limit)
*/
ori r9, r9, 0x40
rlwimi r10, r9, 0, 20, 31
- mr r11, r12
b finish_tlb_load
@@ -411,9 +409,9 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r9, SPRN_SPRG_SCRATCH5
mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
+ mtspr SPRN_PID, r9
mtcr r11
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
@@ -529,7 +527,7 @@ WDTException:
* miss get to this point to load the TLB.
* r10 - TLB_TAG value
* r11 - Linux PTE
- * r12, r9 - available to use
+ * r9 - available to use
* PID - loaded with proper value when we get here
* Upon exit, we reload everything and RFI.
* Actually, it will fit now, but oh well.....a common place
@@ -538,30 +536,28 @@ WDTException:
tlb_4xx_index:
.long 0
finish_tlb_load:
- /* load the next available TLB index.
- */
- lwz r9, tlb_4xx_index at l(0)
- addi r9, r9, 1
- andi. r9, r9, (PPC40X_TLB_SIZE-1)
- stw r9, tlb_4xx_index at l(0)
-
-6:
/*
* Clear out the software-only bits in the PTE to generate the
* TLB_DATA value. These are the bottom 2 bits of the RPM, the
* top 3 bits of the zone field, and M.
*/
- li r12, 0x0ce2
- andc r11, r11, r12
+ li r9, 0x0ce2
+ andc r11, r11, r9
+
+ /* load the next available TLB index. */
+ lwz r9, tlb_4xx_index at l(0)
+ addi r9, r9, 1
+ andi. r9, r9, PPC40X_TLB_SIZE - 1
+ stw r9, tlb_4xx_index at l(0)
tlbwe r11, r9, TLB_DATA /* Load TLB LO */
tlbwe r10, r9, TLB_TAG /* Load TLB HI */
/* Done...restore registers and get out of here.
*/
- mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r9, SPRN_SPRG_SCRATCH5
mfspr r11, SPRN_SPRG_SCRATCH6
- mtspr SPRN_PID, r12
+ mtspr SPRN_PID, r9
mtcr r11
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
--
2.25.0
More information about the Linuxppc-dev
mailing list