[PATCH 1/3] rtc: ds1374: add uie_unsupported property to drop warning

[Biwen Li (OSS)]

> 
> Hi,
> 
> On 08/05/2020 13:49:23+0800, Biwen Li wrote:
> > From: Biwen Li <biwen.li at nxp.com>
> >
> > Add uie_unsupported property to drop warning as follows:
> >     - $ hwclock.util-linux
> >       hwclock.util-liux: select() /dev/rtc0
> >       to wait for clock tick timed out
> >
> > My case:
> >     - RTC ds1374's INT pin is connected to VCC on T4240RDB,
> >       then the RTC cannot inform cpu about the alarm
> >       interrupt
> >
> > Signed-off-by: Biwen Li <biwen.li at nxp.com>
> > ---
> >  drivers/rtc/rtc-ds1374.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index
> > 9c51a12cf70f..e530e887a17e 100644
> > --- a/drivers/rtc/rtc-ds1374.c
> > +++ b/drivers/rtc/rtc-ds1374.c
> > @@ -651,6 +651,10 @@ static int ds1374_probe(struct i2c_client *client,
> >  	if (ret)
> >  		return ret;
> >
> > +	if (of_property_read_bool(client->dev.of_node,
> > +						 "uie_unsupported"))
> > +		ds1374->rtc->uie_unsupported = true;
> > +
> 
> This is not how this is supposed to work, either the RTC support uie or don't, it is
> not board dependent and certainly doesn't require an
> (undocumented) DT property.
Okay, got it. Thanks.
> 
> >  #ifdef CONFIG_RTC_DRV_DS1374_WDT
> >  	save_client = client;
> >  	ret = misc_register(&ds1374_miscdev);
> > --
> > 2.17.1
> >
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com