May 2016 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun May 1 06:27:02 AEST 2016
Ending: Tue May 31 22:10:36 AEST 2016
Messages: 488

• qemu: Question about including Facebook's Yosemite board   Teddy Reed
• [PATCH phosphor-host-ipmid] ipmid crashing with simplified VERSION_ID   OpenBMC Patches
• [PATCH phosphor-host-ipmid] ipmid crashing with simplified VERSION_ID   OpenBMC Patches
• [PATCH openbmc] VERSION_ID is not granular   OpenBMC Patches
• [PATCH openbmc] VERSION_ID is not granular   OpenBMC Patches
• [PATCH linux] Add debounce for power button, pull down gpioQ7 to unlock identify LED   Joel Stanley
• qemu: Question about including Facebook's Yosemite board   Joel Stanley
• qemu: Question about including Facebook's Yosemite board   Andrew Jeffery
• qemu: Question about including Facebook's Yosemite board   Teddy Reed
• [PATCH phosphor-host-ipmid v2] ipmid crashing with simplified VERSION_ID   OpenBMC Patches
• [PATCH phosphor-host-ipmid v2] ipmid crashing with simplified VERSION_ID   OpenBMC Patches
• [PATCH phosphor-host-ipmid v3] ipmid crashing with simplified VERSION_ID   OpenBMC Patches
• [PATCH phosphor-host-ipmid v3] ipmid crashing with simplified VERSION_ID   OpenBMC Patches
• [PATCH phosphor-host-ipmid] ipmid crashing with simplified VERSION_ID   Andrew Jeffery
• [PATCH pyphosphor v2 3/4] Added python to dts encoder   Andrew Jeffery
• [PATCH pyphosphor v2 3/4] Added python to dts encoder   Joel Stanley
• [PATCH phosphor-objmgr] Add an accessor function for cache entries   OpenBMC Patches
• [PATCH phosphor-objmgr] Add an accessor function for cache entries   OpenBMC Patches
• [PATCH skeleton] Wait for init done before claiming bus name   OpenBMC Patches
• [PATCH skeleton] Wait for init done before claiming bus name   OpenBMC Patches
• [PATCH openpower-inventory-upload] Convert inventory-upload to a dbus loop   OpenBMC Patches
• [PATCH openpower-inventory-upload] Convert inventory-upload to a dbus loop   OpenBMC Patches
• [PATCH btbridge v2 0/4] Tests   OpenBMC Patches
• [PATCH btbridge v2 1/4] Initialise variable to avoid using it uninitialised   OpenBMC Patches
• [PATCH btbridge v2 2/4] Increase debugging output when receiving a response to message from dbus   OpenBMC Patches
• [PATCH btbridge v2 3/4] Add travis dir to keep all the Travis CI specific files together   OpenBMC Patches
• [PATCH btbridge v2 4/4] Initial set of test.   OpenBMC Patches
• [PATCH btbridge v3 0/5] Tests   OpenBMC Patches
• [PATCH btbridge v3 1/5] Initialise variable to avoid using it uninitialised   OpenBMC Patches
• [PATCH btbridge v3 2/5] Increase debugging output when receiving a response to message from dbus   OpenBMC Patches
• [PATCH btbridge v3 3/5] Add travis dir to keep all the Travis CI specific files together   OpenBMC Patches
• [PATCH btbridge v3 4/5] Initial set of test.   OpenBMC Patches
• [PATCH btbridge v3 5/5] Travis CI: Bump to Ubuntu 16.04   OpenBMC Patches
• [PATCH btbridge v4 0/6] Tests   OpenBMC Patches
• [PATCH btbridge v4 1/6] Initialise variable to avoid using it uninitialised   OpenBMC Patches
• [PATCH btbridge v4 2/6] Increase debugging output when receiving a response to message from dbus   OpenBMC Patches
• [PATCH btbridge v4 3/6] Add travis dir to keep all the Travis CI specific files together   OpenBMC Patches
• [PATCH btbridge v4 4/6] Initial set of test.   OpenBMC Patches
• [PATCH btbridge v4 5/6] Travis CI: Bump to Ubuntu 16.04   OpenBMC Patches
• [PATCH btbridge v4 6/6] Add .gitignore   OpenBMC Patches
• [PATCH btbridge v4 0/6] Tests   Cyril Bur
• [PATCH openbmc] Add version_id support in to openbmc   OpenBMC Patches
• [PATCH openbmc] Add version_id support in to openbmc   OpenBMC Patches
• [PATCH 0/6] Firestone patches   Cyril Bur
• [PATCH 1/6] phy/broadcom: Add support for the BCM54210E   Cyril Bur
• [PATCH 2/6] arm/dts/aspeed: Move mac nsci properties   Cyril Bur
• [PATCH 3/6] arm/dts: Add Firestone BMC board   Cyril Bur
• [PATCH 4/6] arm/dts: Set I2C_TEN_BIT_ADDRESS in Firestone BMC board i2c addresses   Cyril Bur
• [PATCH 5/6] arm/dts: Remove mac hardware checksum from Firestone BMC Board   Cyril Bur
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Cyril Bur
• [PATCH skeleton] [skeleton]: Fix hard-coded path name when creating sensor object   OpenBMC Patches
• [PATCH skeleton] [skeleton]: Fix hard-coded path name when creating sensor object   OpenBMC Patches
• [PATCH 4/6] arm/dts: Set I2C_TEN_BIT_ADDRESS in Firestone BMC board i2c addresses   Joel Stanley
• [PATCH 1/6] phy/broadcom: Add support for the BCM54210E   Joel Stanley
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Joel Stanley
• [PATCH 0/6] Firestone patches   Joel Stanley
• [PATCH openbmc] Bump versions for inventory upload   OpenBMC Patches
• [PATCH openbmc] Bump versions for inventory upload   OpenBMC Patches
• [PATCH openbmc] meta-phosphor: Move to openbmc-20160505-1   OpenBMC Patches
• [PATCH openbmc] meta-phosphor: Move to openbmc-20160505-1   OpenBMC Patches
• [PATCH 4/6] arm/dts: Set I2C_TEN_BIT_ADDRESS in Firestone BMC board i2c addresses   Benjamin Herrenschmidt
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Benjamin Herrenschmidt
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Benjamin Herrenschmidt
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Cyril Bur
• [PATCH 4/6] arm/dts: Set I2C_TEN_BIT_ADDRESS in Firestone BMC board i2c addresses   Cyril Bur
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Gavin Shan
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Benjamin Herrenschmidt
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Benjamin Herrenschmidt
• [PATCH skeleton] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH skeleton] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH 0/8] NSCI Improvement   Gavin Shan
• [PATCH 1/8] net/ncsi: Remove netlink support   Gavin Shan
• [PATCH 2/8] net/ncsi: Add NCSI_DEV_PRIV_FLAG_POPULATED   Gavin Shan
• [PATCH 3/8] net/ncsi: Enumerate NCSI channels in advance   Gavin Shan
• [PATCH 4/8] net/ncsi: Remove ncsi_stop_dev()   Gavin Shan
• [PATCH 5/8] net/ncsi: Enable AEN on active channel   Gavin Shan
• [PATCH 6/8] net/ncsi: Improvement for ncsi_dev_suspend()   Gavin Shan
• [PATCH 7/8] net/farady: Keep MAC always active for NCSI packets   Gavin Shan
• [PATCH 8/8] net/ncsi: LSC AEN handler improvement   Gavin Shan
• Resolving the lonely pull request   Andrew Jeffery
• [PATCH docs] userguide: Generate userguide.tex to include \tightlist macro   OpenBMC Patches
• [PATCH docs] userguide: Generate userguide.tex to include \tightlist macro   OpenBMC Patches
• [PATCH docs 0/2] Trivial: Fix typos   OpenBMC Patches
• [PATCH docs 1/2] rest-api.md: Fix 'emumerate' typo   OpenBMC Patches
• [PATCH docs 2/2] rest-api: Fix capitalisation of 'Just'   OpenBMC Patches
• [PATCH skeleton v2] [skeleton]: Fix hard-coded path name when creating sensor object   OpenBMC Patches
• [PATCH skeleton v2] [skeleton]: Fix hard-coded path name when creating sensor object   OpenBMC Patches
• [PATCH skeleton v7 00/21] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v7 01/21] add i2craw tool and hdd status function   OpenBMC Patches
• [PATCH skeleton v7 02/21] Heartbeat Led function   OpenBMC Patches
• [PATCH skeleton v7 03/21] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v7 04/21] Setup FUNC_MODE[2:0]   OpenBMC Patches
• [PATCH skeleton v7 05/21] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v7 06/21] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v7 07/21] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v7 08/21] Revert "Fill in the threshold settings for CPU and DIMM"   OpenBMC Patches
• [PATCH skeleton v7 09/21] Add I2C-6 lm75 outlet temperature sensor   OpenBMC Patches
• [PATCH skeleton v7 10/21] Modify the hard-coded hwmon ID for PowerCap   OpenBMC Patches
• [PATCH skeleton v7 11/21] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v7 12/21] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v7 13/21] Fix skeleton Makefile   OpenBMC Patches
• [PATCH skeleton v7 14/21] Set lower threshold for ambient/CPU/DIMM sensors   OpenBMC Patches
• [PATCH skeleton v7 15/21] Fix memory leak   OpenBMC Patches
• [PATCH skeleton v7 16/21] Support FAN tach sensors   OpenBMC Patches
• [PATCH skeleton v7 17/21] Generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v7 18/21] Keep original design to generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v7 19/21] Support FAN LED feature   OpenBMC Patches
• [PATCH skeleton v7 20/21] Revert "Add I2C-6 lm75 outlet temperature sensor"   OpenBMC Patches
• [PATCH skeleton v7 21/21] Revert "Setup FUNC_MODE[2:0]"   OpenBMC Patches
• OpenBMC Story(151536):- IPMI Network Settings Override   Ratan K Gupta
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Sertac Cakici
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Cyril Bur
• [PATCH skeleton v2] [skeleton]: Fix hard-coded path name when creating sensor object   Andrew Jeffery
• [PATCH skeleton v8 00/22] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v8 01/22] add i2craw tool and hdd status function   OpenBMC Patches
• [PATCH skeleton v8 02/22] Heartbeat Led function   OpenBMC Patches
• [PATCH skeleton v8 03/22] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v8 04/22] Setup FUNC_MODE[2:0]   OpenBMC Patches
• [PATCH skeleton v8 05/22] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v8 06/22] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v8 07/22] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v8 08/22] Revert "Fill in the threshold settings for CPU and DIMM"   OpenBMC Patches
• [PATCH skeleton v8 09/22] Add I2C-6 lm75 outlet temperature sensor   OpenBMC Patches
• [PATCH skeleton v8 10/22] Modify the hard-coded hwmon ID for PowerCap   OpenBMC Patches
• [PATCH skeleton v8 11/22] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v8 12/22] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v8 13/22] Fix skeleton Makefile   OpenBMC Patches
• [PATCH skeleton v8 14/22] Set lower threshold for ambient/CPU/DIMM sensors   OpenBMC Patches
• [PATCH skeleton v8 15/22] Fix memory leak   OpenBMC Patches
• [PATCH skeleton v8 16/22] Support FAN tach sensors   OpenBMC Patches
• [PATCH skeleton v8 17/22] Generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v8 18/22] Keep original design to generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v8 19/22] Support FAN LED feature   OpenBMC Patches
• [PATCH skeleton v8 20/22] Revert "Add I2C-6 lm75 outlet temperature sensor"   OpenBMC Patches
• [PATCH skeleton v8 21/22] Revert "Setup FUNC_MODE[2:0]"   OpenBMC Patches
• [PATCH skeleton v8 22/22] Fix Makefile issue   OpenBMC Patches
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Benjamin Herrenschmidt
• [PATCH skeleton v8 00/22] Add fan control algorithm   Samuel Mendoza-Jonas
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Cyril Bur
• [PATCH skeleton v9 00/23] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v9 01/23] add i2craw tool and hdd status function   OpenBMC Patches
• [PATCH skeleton v9 02/23] Heartbeat Led function   OpenBMC Patches
• [PATCH skeleton v9 03/23] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v9 04/23] Setup FUNC_MODE[2:0]   OpenBMC Patches
• [PATCH skeleton v9 05/23] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v9 06/23] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v9 07/23] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v9 08/23] Revert "Fill in the threshold settings for CPU and DIMM"   OpenBMC Patches
• [PATCH skeleton v9 09/23] Add I2C-6 lm75 outlet temperature sensor   OpenBMC Patches
• [PATCH skeleton v9 10/23] Modify the hard-coded hwmon ID for PowerCap   OpenBMC Patches
• [PATCH skeleton v9 11/23] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v9 12/23] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v9 13/23] Fix skeleton Makefile   OpenBMC Patches
• [PATCH skeleton v9 14/23] Set lower threshold for ambient/CPU/DIMM sensors   OpenBMC Patches
• [PATCH skeleton v9 15/23] Fix memory leak   OpenBMC Patches
• [PATCH skeleton v9 16/23] Support FAN tach sensors   OpenBMC Patches
• [PATCH skeleton v9 17/23] Generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v9 18/23] Keep original design to generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v9 19/23] Support FAN LED feature   OpenBMC Patches
• [PATCH skeleton v9 20/23] Revert "Add I2C-6 lm75 outlet temperature sensor"   OpenBMC Patches
• [PATCH skeleton v9 21/23] Revert "Setup FUNC_MODE[2:0]"   OpenBMC Patches
• [PATCH skeleton v9 22/23] Fix Makefile issue   OpenBMC Patches
• [PATCH skeleton v9 23/23] Fix Makefile   OpenBMC Patches
• [PATCH skeleton v9 23/23] Fix Makefile   Samuel Mendoza-Jonas
• [PATCH skeleton v6] skeleton: fixed hard-coding of master OCC hwmon sysfs path for PowerCap object   OpenBMC Patches
• [PATCH skeleton v6] skeleton: fixed hard-coding of master OCC hwmon sysfs path for PowerCap object   OpenBMC Patches
• [PATCH skeleton v9 10/23] Modify the hard-coded hwmon ID for PowerCap   Yi TZ Li
• [PATCH skeleton v10 00/22] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v10 01/22] add i2craw tool and hdd status function   OpenBMC Patches
• [PATCH skeleton v10 02/22] Heartbeat Led function   OpenBMC Patches
• [PATCH skeleton v10 03/22] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v10 04/22] Setup FUNC_MODE[2:0]   OpenBMC Patches
• [PATCH skeleton v10 05/22] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v10 06/22] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v10 07/22] fix info memory leak   OpenBMC Patches
• [PATCH skeleton v10 08/22] Revert "Fill in the threshold settings for CPU and DIMM"   OpenBMC Patches
• [PATCH skeleton v10 09/22] Add I2C-6 lm75 outlet temperature sensor   OpenBMC Patches
• [PATCH skeleton v10 10/22] Modify the hard-coded hwmon ID for PowerCap   OpenBMC Patches
• [PATCH skeleton v10 11/22] Fill in the threshold settings for CPU and DIMM   OpenBMC Patches
• [PATCH skeleton v10 12/22] Add fan control algorithm   OpenBMC Patches
• [PATCH skeleton v10 13/22] Fix skeleton Makefile   OpenBMC Patches
• [PATCH skeleton v10 14/22] Set lower threshold for ambient/CPU/DIMM sensors   OpenBMC Patches
• [PATCH skeleton v10 15/22] Fix memory leak   OpenBMC Patches
• [PATCH skeleton v10 16/22] Support FAN tach sensors   OpenBMC Patches
• [PATCH skeleton v10 17/22] Generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v10 18/22] Keep original design to generate thermaltrip event   OpenBMC Patches
• [PATCH skeleton v10 19/22] Support FAN LED feature   OpenBMC Patches
• [PATCH skeleton v10 20/22] Revert "Add I2C-6 lm75 outlet temperature sensor"   OpenBMC Patches
• [PATCH skeleton v10 21/22] Revert "Setup FUNC_MODE[2:0]"   OpenBMC Patches
• [PATCH skeleton v10 22/22] Fix Makefile issue   OpenBMC Patches
• [PATCH linux] [hwmon pmbus]: Enable adm1278 VOUT sampling   OpenBMC Patches
• [PATCH linux] [hwmon pmbus]: Enable adm1278 VOUT sampling   OpenBMC Patches
• [PATCH openbmc] [openbmc]: Build adm1275 pmbus driver into Barreleye kernel   OpenBMC Patches
• [PATCH openbmc] [openbmc]: Build adm1275 pmbus driver into Barreleye kernel   OpenBMC Patches
• [PATCH openbmc] [openbmc]: Build adm1275 pmbus driver into Barreleye kernel   Joel Stanley
• [PATCH linux] [hwmon pmbus]: Enable adm1278 VOUT sampling   Joel Stanley
• [PATCH openbmc] meta-phosphor: Move to openbmc-20160511-1   OpenBMC Patches
• [PATCH openbmc] meta-phosphor: Move to openbmc-20160511-1   OpenBMC Patches
• [PATCH 0/8] NSCI Improvement   Joel Stanley
• [PATCH docs] Take a stab at a proper DBUS API document.   OpenBMC Patches
• [PATCH docs] Take a stab at a proper DBUS API document.   OpenBMC Patches
• [PATCH docs v2 0/2] userguide: Generate userguide.tex to include \tightlist macro   OpenBMC Patches
• [PATCH docs v2 1/2] userguide: Generate userguide.tex to include \tightlist macro   OpenBMC Patches
• [PATCH docs v2 2/2] Makefile: Remove xelatex build log on clean   OpenBMC Patches
• [PATCH docs v2 0/3] Trivial: Fix typos   OpenBMC Patches
• [PATCH docs v2 1/3] rest-api.md: Fix 'emumerate' typo   OpenBMC Patches
• [PATCH docs v2 2/3] rest-api: Fix capitalisation of 'Just'   OpenBMC Patches
• [PATCH docs v2 3/3] README.md: Fix 'easily to learn' grammar   OpenBMC Patches
• [PATCH openbmc] [openbmc]: Build adm1275 pmbus driver into Barreleye kernel   Yi TZ Li
• [PATCH openbmc v2] meta-phosphor: Move to openbmc-20160511-1   OpenBMC Patches
• [PATCH openbmc v2] meta-phosphor: Move to openbmc-20160511-1   OpenBMC Patches
• [PATCH openbmc] [openbmc]: Build adm1275 pmbus driver into Barreleye kernel   Joel Stanley
• OpenBMC Story(151536):- IPMI Network Settings Override   Adriana Kobylak
• [PATCH skeleton] replace centaur0 with membuf0 for Palmetto.py   OpenBMC Patches
• [PATCH skeleton] replace centaur0 with membuf0 for Palmetto.py   OpenBMC Patches
• [PATCH 0/8] NSCI Improvement   Gavin Shan
• [PATCH 0/8] NSCI Improvement   Joel Stanley
• [PATCH linux] Add debounce for power button, pull down gpioQ7 to unlock identify LED   Joel Stanley
• [PATCH 0/8] NSCI Improvement   Gavin Shan
• [PATCH docs] Take a stab at a proper DBUS API document.   Jeremy Kerr
• 回信:Re: [PATCH linux] Add debounce for power button, pull down gpioQ7 to unlock identify LED   ken.th.liu at foxconn.com
• [PATCH phosphor-host-ipmid] Handle errors finding openbmc_path #75   OpenBMC Patches
• [PATCH phosphor-host-ipmid] Handle errors finding openbmc_path #75   OpenBMC Patches
• [PATCH 6/6] net/phy: Expose 100base-T capability only   Chris Austen
• [openbmc/docs] Take a stab at a proper DBUS API document. (#25)   Brad Bishop
• [PATCH docs] Take a stab at a proper DBUS API document.   Brad Bishop
• [PATCH docs v2] Take a stab at a proper DBUS API document.   OpenBMC Patches
• [PATCH docs v2] Take a stab at a proper DBUS API document.   OpenBMC Patches
• [PATCH ipmi-fru-parser] Increase size of buffer length variable   OpenBMC Patches
• [PATCH ipmi-fru-parser] Increase size of buffer length variable   OpenBMC Patches
• [PATCH linux] Add debounce for power button, pull down gpioQ7 to unlock identify LED   Andrew Jeffery
• qemu palmetto-bmc   Andrew Jeffery
• [PATCH phosphor-host-ipmid v2] Handle errors finding openbmc_path #75   OpenBMC Patches
• [PATCH phosphor-host-ipmid v2] Handle errors finding openbmc_path #75   OpenBMC Patches
• [PATCH ipmi-fru-parser] Increase size of buffer length variable   Adriana Kobylak
• [PATCH ipmi-fru-parser] Increase size of buffer length variable   Stewart Smith
• [PATCH phosphor-host-ipmid v2] Handle errors finding openbmc_path #75   Andrew Jeffery
• [PATCH phosphor-host-ipmid v2] Handle errors finding openbmc_path #75   Nan KX Li
• [PATCH linux] hwmon: power8_occ_i2c: Add more hwmon sysfs attribute definition   OpenBMC Patches
• [PATCH linux] hwmon: power8_occ_i2c: Add more hwmon sysfs attribute definition   OpenBMC Patches
• [PATCH linux] Add debounce for power button, pull down gpioQ7 to unlock identify LED   Adriana Kobylak
• [PATCH ipmi-fru-parser v2] Increase size of buffer length variable   OpenBMC Patches
• [PATCH ipmi-fru-parser v2] Replace uint8_t buffer length variable with size_t   OpenBMC Patches
• [PATCH pyphosphor] Fix bug injected during skeleton port   OpenBMC Patches
• [PATCH pyphosphor] Fix bug injected during skeleton port   OpenBMC Patches
• [PATCH pyphosphor] Add enum for Freedesktop unknown service error   OpenBMC Patches
• [PATCH pyphosphor] Add enum for Freedesktop unknown service error   OpenBMC Patches
• [RFC PATCH openbmc v3 1/8] meta-openbmc-bsp: Add qemu git recipe   Patrick Williams
• [RFC PATCH openbmc v3 2/8] runqemu: Add palmetto target   Patrick Williams
• [RFC PATCH openbmc v3 4/8] linux-obmc: Allow processing of multiple device trees   Patrick Williams
• [RFC PATCH openbmc v3 7/8] palmetto: Build devicetrees for hardware and QEMU   Patrick Williams
• [RFC PATCH openbmc v3 8/8] runqemu-internal: Configure tun/tap network for palmetto-bmc   Patrick Williams
• [PATCH phosphor-objmgr] Avoid introspection during discovery   OpenBMC Patches
• [PATCH phosphor-objmgr] Avoid introspection during discovery   OpenBMC Patches
• [PATCH openbmc] Allow multiple systemd service files   OpenBMC Patches
• [PATCH openbmc] Allow multiple systemd service files   OpenBMC Patches
• [PATCH openbmc] Re-enable out of tree device trees   OpenBMC Patches
• [PATCH openbmc] Re-enable out of tree device trees   OpenBMC Patches
• [PATCH ipmi-fru-parser v2] Replace uint8_t buffer length variable with size_t   Daniel Axtens
• [PATCH phosphor-host-ipmid v2] Handle errors finding openbmc_path #75   Andrew Jeffery
• [RFC PATCH openbmc v3 1/8] meta-openbmc-bsp: Add qemu git recipe   Andrew Jeffery
• [RFC PATCH openbmc v3 2/8] runqemu: Add palmetto target   Andrew Jeffery
• [RFC PATCH openbmc v3 8/8] runqemu-internal: Configure tun/tap network for palmetto-bmc   Andrew Jeffery
• Extending runqemu/runqemu-internal with new machines   Andrew Jeffery
• 回信:Re: [PATCH linux] Add debounce for power button, pull down gpioQ7 to unlock identify LED   ken.th.liu at foxconn.com
• [PATCH phosphor-event] Create a possible limit to the number of logs recorded   OpenBMC Patches
• [PATCH phosphor-event] Create a possible limit to the number of logs recorded   OpenBMC Patches
• Re: 回信:Re: [PATCH linux] Add debounce for power button, pull down gpioQ7 to unlock identify LED   Joel Stanley
• 回信:Re:_回信:Re:_[PATCH_linux]_Add_debounce_for_power_button,_pull_down_gpioQ7_to_unlock_identify_LED   ken.th.liu at foxconn.com
• [PATCH phosphor-host-ipmid v3] Handle errors finding openbmc_path #75   OpenBMC Patches
• [PATCH phosphor-host-ipmid v3] Handle errors finding openbmc_path #75   OpenBMC Patches
• [yocto] Extending runqemu/runqemu-internal with new machines   Burton, Ross
• [PATCH phosphor-settingsd] Use pyphosphor rather than skeleton Openbmc.py   OpenBMC Patches
• [PATCH phosphor-settingsd] Use pyphosphor rather than skeleton Openbmc.py   OpenBMC Patches
• [PATCH skeleton] Deprecate Openbmc.py   OpenBMC Patches
• [PATCH skeleton] Deprecate Openbmc.py   OpenBMC Patches
• [PATCH pyphosphor] Move sensors.py and propertycacher.py frm skeleton   OpenBMC Patches
• [PATCH pyphosphor] Move sensors.py and propertycacher.py frm skeleton   OpenBMC Patches
• [PATCH skeleton 0/3] Deprecate modules provided by pyphosphor   OpenBMC Patches
• [PATCH skeleton 1/3] Deprecate Openbmc.py   OpenBMC Patches
• [PATCH skeleton 2/3] Deprecate PropertyCacher.py   OpenBMC Patches
• [PATCH skeleton 3/3] Deprecate Sensors.py   OpenBMC Patches
• [PATCH openbmc] Add pflash to SDK   OpenBMC Patches
• [PATCH openbmc] Add pflash to SDK   OpenBMC Patches
• [PATCH openbmc v2] Re-enable out of tree device trees   OpenBMC Patches
• [PATCH openbmc v2] Re-enable out of tree device trees   OpenBMC Patches
• [PATCH openbmc v2] Allow multiple systemd service files   OpenBMC Patches
• [PATCH openbmc v2] Allow multiple systemd service files   OpenBMC Patches
• [PATCH skeleton v2 0/2] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH skeleton v2 1/2] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH skeleton v2 2/2] Host xstop sensor: Add sensor process to be started up, Emit signal on xstop, wait 30secs before rebooting host and a python binding object.   OpenBMC Patches
• [PATCH linux] Add motherboard eeprom located at i2c4 address 0xA8   OpenBMC Patches
• [PATCH linux] Add motherboard eeprom located at i2c4 address 0xA8   OpenBMC Patches
• [PATCH qemu 0/3] add i2c support   Cédric Le Goater
• [PATCH qemu 1/3] i2c: add aspeed i2c crontroller   Cédric Le Goater
• [PATCH qemu 2/3] ast2400: add a rtc device on I2C bus 0   Cédric Le Goater
• [PATCH qemu 3/3] ast2400: add a temp sensor device on I2C bus 3   Cédric Le Goater
• [PATCH skeleton] Move board config files to their own directory   OpenBMC Patches
• [PATCH skeleton] Move board config files to their own directory   OpenBMC Patches
• [PATCH skeleton v2 0/3] Deprecate modules provided by pyphosphor   OpenBMC Patches
• [PATCH skeleton v2 1/3] Deprecate Openbmc.py   OpenBMC Patches
• [PATCH skeleton v2 2/3] Deprecate PropertyCacher.py   OpenBMC Patches
• [PATCH skeleton v2 3/3] Deprecate Sensors.py   OpenBMC Patches
• [PATCH skeleton v3 0/3] Deprecate modules provided by pyphosphor   OpenBMC Patches
• [PATCH skeleton v3 1/3] Deprecate Openbmc.py   OpenBMC Patches
• [PATCH skeleton v3 2/3] Deprecate PropertyCacher.py   OpenBMC Patches
• [PATCH skeleton v3 3/3] Deprecate Sensors.py   OpenBMC Patches
• [PATCH openbmc] Add pflash to SDK   Cyril Bur
• [PATCH skeleton v2 1/3] Deprecate Openbmc.py   Cyril Bur
• [PATCH openbmc] Add pflash to SDK   Brad Bishop
• [PATCH skeleton v2 2/3] Deprecate PropertyCacher.py   Cyril Bur
• [PATCH skeleton v2 3/3] Deprecate Sensors.py   Cyril Bur
• [PATCH openbmc] Add pflash to SDK   Cyril Bur
• [PATCH linux] Add motherboard eeprom located at i2c4 address 0xA8   Joel Stanley
• [PATCH openbmc] meta-phosphor: Move to openbmc-20160518-1   OpenBMC Patches
• [PATCH openbmc] meta-phosphor: Move to openbmc-20160518-1   OpenBMC Patches
• [yocto] Extending runqemu/runqemu-internal with new machines   Andrew Jeffery
• [yocto] Extending runqemu/runqemu-internal with new machines   Burton, Ross
• [PATCH skeleton v3 0/3] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH skeleton v3 1/3] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH skeleton v3 2/3] Host xstop sensor: Add sensor process to be started up, Emit signal on xstop, wait 30secs before rebooting host and a python binding object.   OpenBMC Patches
• [PATCH skeleton v3 3/3] Fix code review comments from Chris Austen.   OpenBMC Patches
• [PATCH qemu 1/3] i2c: add aspeed i2c crontroller   Joel Stanley
• [PATCH qemu 3/3] ast2400: add a temp sensor device on I2C bus 3   Joel Stanley
• [PATCH qemu 2/3] ast2400: add a rtc device on I2C bus 0   Joel Stanley
• [PATCH qemu 3/3] ast2400: add a temp sensor device on I2C bus 3   Cédric Le Goater
• [PATCH qemu 2/3] ast2400: add a rtc device on I2C bus 0   Cédric Le Goater
• [PATCH phosphor-host-ipmid] Cleanup phosphor-host-ipmid storageaddsel.C   OpenBMC Patches
• [PATCH phosphor-host-ipmid] Cleanup phosphor-host-ipmid storageaddsel.C   OpenBMC Patches
• [PATCH qemu 2/3] ast2400: add a rtc device on I2C bus 0   Joel Stanley
• [PATCH phosphor-host-ipmid v3] Support for restricted mode for IPMI commands   OpenBMC Patches
• [PATCH phosphor-host-ipmid v3] Support for restricted mode for IPMI commands   OpenBMC Patches
• [PATCH skeleton] Read vpd from motherboard and add it to the inventory   OpenBMC Patches
• [PATCH skeleton] Read vpd from motherboard and add it to the inventory   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v3] Support for IPMI restricted mode   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v3] Support for restricted mode for IPMI commands   OpenBMC Patches
• [PATCH ipmi-fru-parser] Support for restricted mode for IPMI commands   OpenBMC Patches
• [PATCH ipmi-fru-parser] Support for restricted mode for IPMI commands   OpenBMC Patches
• [yocto] Extending runqemu/runqemu-internal with new machines   Andrew Jeffery
• [PATCH qemu 1/3] i2c: add aspeed i2c crontroller   Andrew Jeffery
• [PATCH openbmc v2] Re-enable out of tree device trees   Joel Stanley
• [PATCH skeleton v3 3/3] Fix code review comments from Chris Austen.   Adriana Kobylak
• [PATCH btbridge v4 1/6] Initialise variable to avoid using it uninitialised   Andrew Jeffery
• [PATCH btbridge v4 2/6] Increase debugging output when receiving a response to message from dbus   Andrew Jeffery
• [PATCH btbridge v4 3/6] Add travis dir to keep all the Travis CI specific files together   Andrew Jeffery
• [PATCH btbridge v4 4/6] Initial set of test.   Andrew Jeffery
• [PATCH btbridge v4 5/6] Travis CI: Bump to Ubuntu 16.04   Andrew Jeffery
• [PATCH btbridge v4 6/6] Add .gitignore   Andrew Jeffery
• [PATCH btbridge v4 1/6] Initialise variable to avoid using it uninitialised   Cyril Bur
• [PATCH btbridge v4 4/6] Initial set of test.   Cyril Bur
• Aims for BMC emulation in qemu   Andrew Jeffery
• [PATCH btbridge v4 5/6] Travis CI: Bump to Ubuntu 16.04   Cyril Bur
• [PATCH btbridge v4 4/6] Initial set of test.   Andrew Jeffery
• [PATCH skeleton v4] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH skeleton v4] Enable and Handle Checkstop gpio sensor.   OpenBMC Patches
• [PATCH qemu 1/3] i2c: add aspeed i2c crontroller   Cédric Le Goater
• [PATCH qemu 1/3] i2c: add aspeed i2c crontroller   Cédric Le Goater
• [PATCH openbmc] Bump version for console, object manager, and event logs   OpenBMC Patches
• [PATCH openbmc] Bump version for console, object manager, and event logs   OpenBMC Patches
• [PATCH openbmc] Bump pyphosphor version   OpenBMC Patches
• [PATCH openbmc] Bump pyphosphor version   OpenBMC Patches
• [PATCH qemu] hw/timer: Add clock value matching support to aspeed_timer   Andrew Jeffery
• [PATCH linux] hwmon: power8_occ_i2c: create hwmon sysfs attributes dynamically   OpenBMC Patches
• [PATCH linux] hwmon: power8_occ_i2c: create hwmon sysfs attributes dynamically   OpenBMC Patches
• [PATCH qemu 1/3] i2c: add aspeed i2c crontroller   Andrew Jeffery
• [PATCH 0/8] NSCI Improvement   Gavin Shan
• [PATCH] aspeed_defconfig: Enable SHMEM and TMPFS   Andrew Jeffery
• [PATCH] aspeed_defconfig: Enable SHMEM and TMPFS   Cédric Le Goater
• Event Log parser   Vasant Hegde
• [PATCH openbmc] Release openbmc-20160521-1   OpenBMC Patches
• [PATCH openbmc] Release openbmc-20160521-1   OpenBMC Patches
• [PATCH skeleton] Add update rest interface to bmc   OpenBMC Patches
• [PATCH skeleton] Add update rest interface to bmc   OpenBMC Patches
• Aims for BMC emulation in qemu   Chris Austen
• [PATCH docs] Update dbus-interfaces.md   OpenBMC Patches
• [PATCH docs] Update dbus-interfaces.md   OpenBMC Patches
• Aims for BMC emulation in qemu   Andrew Jeffery
• [PATCH qemu] hw/timer: Add clock value matching support to aspeed_timer   Joel Stanley
• Aims for BMC emulation in qemu   Cédric Le Goater
• [PATCH openbmc 0/7] Update flash update to be useable at runtime.   OpenBMC Patches
• [PATCH openbmc 1/7] initfs: shutdown: comment on update success   OpenBMC Patches
• [PATCH openbmc 2/7] initfs: Store whiltelist in a directory of files   OpenBMC Patches
• [PATCH openbmc 3/7] initfs: update: Don't exec sh or sulogin on error just exit 1   OpenBMC Patches
• [PATCH openbmc 4/7] initfs: update: no error if no files to copy to ram   OpenBMC Patches
• [PATCH openbmc 5/7] initfs: update: add option to perform checks but skip actual update   OpenBMC Patches
• [PATCH openbmc 6/7] initfs: update: check individual mtd partitions for mounts   OpenBMC Patches
• [PATCH openbmc 7/7] initfs: update: add check for image size vs mtd size   OpenBMC Patches
• _[PATCH_linux]_Add_debounce_for_power_button, _pull_down_gpioQ7_to_unlock_identify_LED   Joel Stanley
• [PATCH linux] net/ethernet/faraday: Forward port ftgmac100 NC-SI   Joel Stanley
• [PATCH linux] mtd/spi-nor/aspeed: Forward port to 4.7   Joel Stanley
• [PATCH linux] gpio/aspeed: Forward port GPIO driver   Joel Stanley
• [PATCH linux] net/ethernet/faraday: Forward port ftgmac100 NC-SI   Gavin Shan
• Hi contributors!   Cyril Bur
• [PATCH phosphor-host-ipmid] Returning correct value from handle_ipmid_command in ipmid.C   OpenBMC Patches
• [PATCH phosphor-host-ipmid] Returning correct value from handle_ipmid_command in ipmid.C   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem 0/2] Fix endianness issue5   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem 1/2] Handle multiple attempts at ipmi reservation ids   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem 2/2] Fix endianness issue5   OpenBMC Patches
• [PATCH phosphor-networkd v3] Enabling updates to /etc/resolve.conf either manually or using DHCP supplied DNS IP   OpenBMC Patches
• [PATCH phosphor-networkd v3] Enabling updates to /etc/resolve.conf either manually or using DHCP supplied DNS IP   OpenBMC Patches
• [PATCH phosphor-host-ipmid] Returning correct value from handle_ipmid_command in ipmid.C   Vishwanatha Subbanna
• [PATCH btbridge v4 1/6] Initialise variable to avoid using it uninitialised   Andrew Jeffery
• [PATCH phosphor-host-ipmid] Returning correct value from handle_ipmid_command in ipmid.C   Nan KX Li
• Hi contributors!   Patrick Williams
• [PATCH openbmc v2] Re-enable out of tree device trees   Patrick Williams
• [PATCH openbmc] Bump skeleton version   OpenBMC Patches
• [PATCH openbmc] Bump skeleton version   OpenBMC Patches
• [PATCH openbmc] Bump IPMI, networkd, REST, and skeleton versions   OpenBMC Patches
• [PATCH openbmc] Bump IPMI, networkd, REST, and skeleton versions   OpenBMC Patches
• Aims for BMC emulation in qemu   Andrew Jeffery
• [PATCH] aspeed_defconfig: Enable SHMEM and TMPFS   Andrew Jeffery
• [PATCH btbridge v4 1/6] Initialise variable to avoid using it uninitialised   Cyril Bur
• Hi contributors!   Cyril Bur
• [PATCH] cheatsheet: QEMU commandline for palmetto-bmc   Andrew Jeffery
• [PATCH] cheatsheet: QEMU commandline for palmetto-bmc   Jeremy Kerr
• [PATCH qemu] hw/timer: Add clock value matching support to aspeed_timer   Andrew Jeffery
• [PATCH qemu] hw/timer: Add clock value matching support to aspeed_timer   Joel Stanley
• [PATCH openbmc v2] Re-enable out of tree device trees   Joel Stanley
• [PATCH openbmc] Build adm1275 driver into linux kernel by default   OpenBMC Patches
• [PATCH openbmc] Build adm1275 driver into linux kernel by default   OpenBMC Patches
• [PATCH openbmc] Update u-boot to pick up memory corruption fix   OpenBMC Patches
• [PATCH openbmc] meta-phosphor/u-boot: Move to newer version   OpenBMC Patches
• [PATCH openbmc v2 0/7] Update flash update to be useable at runtime.   OpenBMC Patches
• [PATCH openbmc v2 1/7] initfs: shutdown: comment on update success   OpenBMC Patches
• [PATCH openbmc v2 2/7] initfs: update: Don't exec sh or sulogin on error just exit 1   OpenBMC Patches
• [PATCH openbmc v2 3/7] initfs: update: no error if no files to copy to ram   OpenBMC Patches
• [PATCH openbmc v2 4/7] initfs: update: add option to perform checks but skip actual update   OpenBMC Patches
• [PATCH openbmc v2 5/7] initfs: update: check individual mtd partitions for mounts   OpenBMC Patches
• [PATCH openbmc v2 6/7] initfs: update: add check for image size vs mtd size   OpenBMC Patches
• [PATCH openbmc v2 7/7] initfs: init: add file for base options   OpenBMC Patches
• [PATCH] Fix i2c-tools SRCURI syntax   Rick Altherr
• [PATCH openpower-host-ipmi-oem 2/2] Fix endianness issue5   Cyril Bur
• [PATCH] Fix i2c-tools SRCURI syntax   Andrew Jeffery
• [PATCH] Fix i2c-tools SRCURI syntax   Rick Altherr
• [PATCH] Fix i2c-tools SRCURI syntax   Rick Altherr
• [PATCH] Fix i2c-tools SRCURI syntax   Andrew Jeffery
• [PATCH] Fix i2c-tools SRCURI syntax   Rick Altherr
• [PATCH] Fix i2c-tools SRCURI syntax   Andrew Jeffery
• [PATCH openbmc] Fix i2c-tools SRCURI syntax   OpenBMC Patches
• [PATCH openbmc] Fix i2c-tools SRCURI syntax   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v2] Fix endianness issue5   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v2] Fix endianness issue5   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v2] Fix endianness issue5   Jeremy Kerr
• [PATCH openpower-host-ipmi-oem v2] Fix endianness issue5   Nan KX Li
• [PATCH rest-dbus] Enable systemd socket activation   OpenBMC Patches
• [PATCH rest-dbus] Enable systemd socket activation   OpenBMC Patches
• [PATCH openbmc-build-scripts] Add docs-build script   OpenBMC Patches
• [PATCH openbmc-build-scripts] Add docs-build script   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v2] Fix endianness issue5   Cyril Bur
• [PATCH openpower-host-ipmi-oem v2] Fix endianness issue5   Nan KX Li
• [PATCH openbmc] Pin host-ipmi-hw-example to a specific Git SRCREV   OpenBMC Patches
• [PATCH openbmc] Pin host-ipmi-hw-example to a specific Git SRCREV   OpenBMC Patches
• [PATCH qemu] hw/timer: Add clock value matching support to aspeed_timer   Andrew Jeffery
• updating u-boot_2013.07.bb recipe   Cédric Le Goater
• updating u-boot_2013.07.bb recipe   Joel Stanley
• updating u-boot_2013.07.bb recipe   Cédric Le Goater
• [PATCH openpower-host-ipmi-oem v3] Fix endianness issue5   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v3] Fix issue5 for endian safe   OpenBMC Patches
• [PATCH skeleton] Add support for checkstop gpio   OpenBMC Patches
• [PATCH skeleton] Add support for checkstop gpio   OpenBMC Patches
• [PATCH openbmc v2] Build adm1275 driver into linux kernel by default   OpenBMC Patches
• [PATCH openbmc v2] Build adm1275 driver into linux kernel by default   OpenBMC Patches
• [PATCH openbmc v3] Build adm1275 driver into linux kernel by default   OpenBMC Patches
• [PATCH openbmc v3] Build adm1275 driver into linux kernel by default   OpenBMC Patches
• Aims for BMC emulation in qemu   Teddy Reed
• [PATCH qemu 00/12] SMC and network support   Cédric Le Goater
• [PATCH qemu 01/12] ast2400: add SMC controllers (FMC and SPI)   Cédric Le Goater
• [PATCH qemu 02/12] ast2400: add SPI flash slave object   Cédric Le Goater
• [PATCH qemu 03/12] ast2400: create SPI flash slaves   Cédric Le Goater
• [PATCH qemu 04/12] m25p80: add a get storage routine   Cédric Le Goater
• [PATCH qemu 05/12] ast2400: handle SPI flash Command mode (read only)   Cédric Le Goater
• [PATCH qemu 06/12] ast2400: use contents of first SPI flash as a rom   Cédric Le Goater
• [PATCH qemu 07/12] m25p80: add RDCR instruction for Macronix chip   Cédric Le Goater
• [PATCH qemu 08/12] m25p80: add mx25l25635f chip   Cédric Le Goater
• [PATCH qemu 09/12] ast2400: use a mx25l25635f chip   Cédric Le Goater
• [PATCH qemu 10/12] ast2400: add a BT device   Cédric Le Goater
• [PATCH qemu 11/12] net: add FTGMAC100 support   Cédric Le Goater
• [PATCH qemu 12/12] ast2400: add a FTGMAC100 nic   Cédric Le Goater
• [PATCH openpower-host-ipmi-oem v3] Fix issue5 for endian safe   Jeremy Kerr
• [PATCH ipmi-fru-parser] Replacing std::ifstream by access(2) for checking file existence   OpenBMC Patches
• [PATCH ipmi-fru-parser] Replacing std::ifstream by access(2) for checking file existence   OpenBMC Patches
• [PATCH ipmi-fru-parser] Replacing std::ifstream by access(2) for checking file existence   Samuel Mendoza-Jonas
• Aims for BMC emulation in qemu   Andrew Jeffery
• [PATCH ipmi-fru-parser] Replacing std::ifstream by access(2) for checking file existence   Vishwanatha Subbanna
• [PATCH ipmi-fru-parser v2] Replacing std::ifstream by access(2) for checking file existence   OpenBMC Patches
• [PATCH ipmi-fru-parser v2] Replacing std::ifstream by access(2) for checking file existence   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v4] Fix endian issue5   OpenBMC Patches
• [PATCH openpower-host-ipmi-oem v4] Fix issue5 for endian safe   OpenBMC Patches

Last message date: Tue May 31 22:10:36 AEST 2016
Archived on: Tue May 31 22:10:46 AEST 2016

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...