[PATCH 6/6] net/phy: Expose 100base-T capability only

[Cyril Bur]

On Tue, 10 May 2016 12:33:26 +1000
Benjamin Herrenschmidt <benh at au1.ibm.com> wrote:

> On Tue, 2016-05-10 at 10:38 +1000, Cyril Bur wrote:
> > I got access to fr112 and only managed to get tftp booting going on it
> > yesterday, all good though, I've tested what I need. Interestingly on that
> > machine networking behaves as we expected and Gavins workaround isn't needed.
> > 
> > I know this is a long shot but do you know how our firestones in Canberra (which
> > are clearly pre GA) might differ?  
> 
> Cyril, could it just be a different uBoot messing with the pin/strap
> config ?
> 

I can't find any difference between the u-boot config registers on fstn2 and
fr112. Joel did suggest the PHY might have strapping difference but I can't
find anything that suggests it can be changed in software.

I will try putting identical versions of AMI firmware (ours is slightly old),
maybe they updated their u-boot to do something special.

> Ben.
> 
> _______________________________________________
> openbmc mailing list
> openbmc at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/openbmc