[PATCH 4/6] arm/dts: Set I2C_TEN_BIT_ADDRESS in Firestone BMC board i2c addresses

Cyril Bur cyrilbur at gmail.com
Fri May 6 11:35:08 AEST 2016


On Fri, 06 May 2016 10:53:45 +1000
Benjamin Herrenschmidt <benh at au1.ibm.com> wrote:

> On Thu, 2016-05-05 at 22:51 +0930, Joel Stanley wrote:
> > On Thu, May 5, 2016 at 10:57 AM, Cyril Bur <cyrilbur at gmail.com>
> > wrote:
> > 
> > Did you work out why we needed this, and why it fixes things?
> > 
> > Should we be doing it for all the device trees?  
> 

I changed the ones that caused the kernel to barf, the reason for the barf
boiled mostly down to that...

> That's weird indeed... Is there a 10-bit device on that bus ? Otherwise
> we shouldn't emit 10-bit addresses. In general, 10-bit addresses stuff
> doesn't work, in my experience at least. We might be papering over some
> other problem...
> 

This is entirely possible, what and how, I have no idea.

Do you have any other ideas?


> > > 
> > > Signed-off-by: Cyril Bur <cyrilbur at gmail.com>
> > > ---
> > >  arch/arm/boot/dts/aspeed-bmc-opp-firestone.dts | 12 ++++++------
> > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > > 
> > > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-firestone.dts
> > > b/arch/arm/boot/dts/aspeed-bmc-opp-firestone.dts
> > > index 2b988e7..379b561 100644
> > > --- a/arch/arm/boot/dts/aspeed-bmc-opp-firestone.dts
> > > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-firestone.dts
> > > @@ -75,7 +75,7 @@
> > >                                 i2c5: i2c-bus at 180 {
> > >                                         tmp423 at 98 {
> > >                                                 compatible =
> > > "ti,tmp423";
> > > -                                               reg = <0x98>;
> > > +                                               reg = <0x80000098>;
> > >                                         };
> > >                                 };
> > >                                 i2c6: i2c-bus at 1c0 {
> > > @@ -98,27 +98,27 @@
> > >                                         status = "okay";
> > >                                         leds at c0 {
> > >                                                 compatible =
> > > "pca,pca9552led";
> > > -                                               reg = <0xc0>;
> > > +                                               reg = <0x800000c0>;
> > >                                                 // led9 -
> > > led_fault_n
> > >                                                 // led10 -
> > > pwr_led_n
> > >                                                 // led11 -
> > > rear_id_led_n
> > >                                         };
> > >                                         rtc at d0 {
> > >                                                 compatible =
> > > "dallas,ds3231";
> > > -                                               reg = <0xd0>;
> > > +                                               reg = <0x800000d0>;
> > >                                         };
> > >                                         si5338a at e2 {
> > >                                                 // SiLabs clock
> > > generator
> > > -                                               reg =<0xe2>;
> > > +                                               reg =<0x800000e2>;
> > >                                         };
> > > 
> > >                                         idt at d6 {
> > >                                                 // IDT 9DBV0641
> > > clock buffer
> > > -                                               reg = <0xd6>;
> > > +                                               reg = <0x800000d6>;
> > >                                         };
> > > 
> > >                                         tpm at a3 {
> > > -                                               reg = <0xa3>;
> > > +                                               reg = <0x800000a3>;
> > >                                         };
> > >                                 };
> > >                                 i2c12: i2c-bus at 440 {
> > > --
> > > 2.8.2
> > > 
> > > _______________________________________________
> > > openbmc mailing list
> > > openbmc at lists.ozlabs.org
> > > https://lists.ozlabs.org/listinfo/openbmc  
> > _______________________________________________
> > openbmc mailing list
> > openbmc at lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/openbmc  
> 



More information about the openbmc mailing list