[PATCH btbridge v4 4/6] Initial set of test.
OpenBMC Patches
openbmc-patches at stwcx.xyz
Wed May 4 11:10:06 AEST 2016
From: Cyril Bur <cyril.bur at au1.ibm.com>
Very simple tests which can hopefully be extended in the future.
The main purpose of this is to be able to use travis-ci to automatate the
running of the tests and being able to fake /dev/bt-host.
Signed-off-by: Cyril Bur <cyril.bur at au1.ibm.com>
---
Makefile | 7 +
bt-host.c | 235 ++++++++++++++++++++++++++++++++++
ipmi-bouncer.c | 131 +++++++++++++++++++
travis/build.sh | 9 ++
travis/org.openbmc.HostIpmi.conf.test | 20 +++
travis/run_tests.sh | 15 +++
6 files changed, 417 insertions(+)
create mode 100644 bt-host.c
create mode 100644 ipmi-bouncer.c
create mode 100644 travis/org.openbmc.HostIpmi.conf.test
create mode 100755 travis/run_tests.sh
diff --git a/Makefile b/Makefile
index 7ffbc01..1cf1a21 100644
--- a/Makefile
+++ b/Makefile
@@ -9,5 +9,12 @@ EXE = btbridged
all: $(EXE)
+.PHONY += test
+test: $(EXE) ipmi-bouncer bt-host
+
+bt-host: bt-host.c
+ gcc -shared -fPIC -ldl $(CFLAGS) $^ -o $@.so
+
clean:
rm -rf *.o $(EXE)
+ rm -rf bt-host.so ipmi-bouncer
diff --git a/bt-host.c b/bt-host.c
new file mode 100644
index 0000000..65bf6bb
--- /dev/null
+++ b/bt-host.c
@@ -0,0 +1,235 @@
+#define _GNU_SOURCE
+#include <dlfcn.h>
+#include <errno.h>
+#include <poll.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/types.h> /* See NOTES */
+#include <sys/socket.h>
+
+#include <linux/bt-host.h>
+
+struct bttest_data {
+ int status;
+ const char msg[64];
+};
+
+static int bt_host_fd;
+static int timer_fd;
+
+static int stop;
+static int sent_id = -1;
+static int recv_id;
+
+/*
+ * btbridged doesn't care about the message EXCEPT the first byte must be
+ * correct.
+ * The first byte is the size not including the length byte its self.
+ * A len less than 4 will constitute an invalid message according to the BT
+ * protocol, btbridged will care.
+ */
+static struct bttest_data data[] = {
+ /*
+ * Note, the 4th byte is cmd, the ipmi-bouncer will put cmd in cc so
+ * in this array always duplicate the command
+ *
+ * Make the first message look like:
+ * seq = 1, netfn = 2, lun = 3 and cmd= 4
+ * (thats how btbridged will print it)
+ */
+ { 0, { 4, 0xb, 1, 4, 4 }},
+ { 0, { 4, 0xff, 0xee, 0xdd, 0xdd, 0xbb }},
+ /*
+ * A bug was found in bt_q_drop(), write a test!
+ * Simply send the same seq number a bunch of times
+ */
+ { 0, { 4, 0xaa, 0xde, 0xaa, 0xaa }},
+ { 0, { 4, 0xab, 0xde, 0xab, 0xab }},
+ { 0, { 4, 0xac, 0xde, 0xac, 0xac }},
+ { 0, { 4, 0xad, 0xde, 0xad, 0xad }},
+ { 0, { 4, 0xae, 0xde, 0xae, 0xae }},
+ { 0, { 4, 0xaf, 0xde, 0xaf, 0xaf }},
+ { 0, { 4, 0xa0, 0xde, 0xa0, 0xa0 }},
+ { 0, { 4, 0xa1, 0xde, 0xa1, 0xa1 }},
+ { 0, { 4, 0xa2, 0xde, 0xa2, 0xa2 }},
+ { 0, { 4, 0xa3, 0xde, 0xa3, 0xa3 }},
+ { 0, { 4, 0xa4, 0xde, 0xa4, 0xa4 }},
+ { 0, { 4, 0xa5, 0xde, 0xa5, 0xa5 }},
+ { 0, { 4, 0xa6, 0xde, 0xa6, 0xa6 }},
+ { 0, { 4, 0xa7, 0xde, 0xa7, 0xa7 }},
+ { 0, { 4, 0xa8, 0xde, 0xa8, 0xa8 }},
+ { 0, { 4, 0xa9, 0xde, 0xa9, 0xa9 }},
+ { 0, { 4, 0xaa, 0x88, 0xaa, 0xaa }},
+ { 0, { 4, 0xab, 0x88, 0xab, 0xab }},
+ { 0, { 4, 0xac, 0x88, 0xac, 0xac }},
+ { 0, { 4, 0xad, 0x88, 0xad, 0xad }},
+ { 0, { 4, 0xae, 0x88, 0xae, 0xae }},
+ { 0, { 4, 0xaf, 0x88, 0xaf, 0xaf }},
+ { 0, { 4, 0xa0, 0x88, 0xa0, 0xa0 }},
+ { 0, { 4, 0xa1, 0x88, 0xa1, 0xa1 }},
+ { 0, { 4, 0xa2, 0x88, 0xa2, 0xa2 }},
+ { 0, { 4, 0xa3, 0x88, 0xa3, 0xa3 }},
+ { 0, { 4, 0xa4, 0x88, 0xa4, 0xa4 }},
+ { 0, { 4, 0xa5, 0x88, 0xa5, 0xa5 }},
+ { 0, { 4, 0xa6, 0x88, 0xa6, 0xa6 }},
+ { 0, { 4, 0xa7, 0x88, 0xa7, 0xa7 }},
+ { 0, { 4, 0xa8, 0x88, 0xa8, 0xa8 }},
+ { 0, { 4, 0xa9, 0x88, 0xa9, 0xa9 }},
+};
+#define BTTEST_NUM (sizeof(data)/sizeof(struct bttest_data))
+#define PREFIX "[BTHOST] "
+
+#define MSG_OUT(f_, ...) do { printf(PREFIX); printf((f_), ##__VA_ARGS__); } while(0)
+#define MSG_ERR(f_, ...) do { fprintf(stderr,PREFIX); fprintf(stderr, (f_), ##__VA_ARGS__); } while(0)
+
+typedef int (*orig_open_t)(const char *pathname, int flags);
+typedef int (*orig_poll_t)(struct pollfd *fds, nfds_t nfds, int timeout);
+typedef int (*orig_read_t)(int fd, void *buf, size_t count);
+typedef ssize_t (*orig_write_t)(int fd, const void *buf, size_t count);
+typedef int (*orig_ioctl_t)(int fd, unsigned long request, char *p);
+typedef int (*orig_timerfd_create_t)(int clockid, int flags);
+
+int ioctl(int fd, unsigned long request, char *p)
+{
+ if (fd == bt_host_fd) {
+ MSG_OUT("ioctl(%d, %lu, %p)\n", fd, request, p);
+ /* TODO Check the request number */
+ return 0;
+ }
+
+ orig_ioctl_t orig_ioctl;
+ orig_ioctl = (orig_ioctl_t)dlsym(RTLD_NEXT, "ioctl");
+ return orig_ioctl(fd, request, p);
+}
+
+int poll(struct pollfd *fds, nfds_t nfds, int timeout)
+{
+ int i, j;
+ int ret = 0;
+ int dropped = 0;
+ struct pollfd *new_fds = calloc(nfds, sizeof(struct pollfd));
+ j = 0;
+ for (i = 0; i < nfds; i++) {
+ if (fds[i].fd == bt_host_fd) {
+ short revents = fds[i].events;
+
+ MSG_OUT("poll() on bt_host fd\n");
+
+ if (stop)
+ revents &= ~POLLIN;
+ if (sent_id == -1)
+ revents &= ~POLLOUT;
+ fds[i].revents = revents;
+ ret++;
+ dropped++;
+ } else if(fds[i].fd == timer_fd) {
+ MSG_OUT("poll() on timerfd fd, dropping request\n");
+
+ fds[i].revents = 0;
+ dropped++;
+ } else {
+ new_fds[j].fd = fds[i].fd;
+ new_fds[j].events = fds[i].events;
+ /* Copy this to be sure */
+ new_fds[j].revents = fds[i].revents;
+ j++;
+ }
+ }
+ orig_poll_t orig_poll;
+ orig_poll = (orig_poll_t)dlsym(RTLD_NEXT, "poll");
+ ret += orig_poll(new_fds, nfds - dropped, timeout);
+ j = 0;
+ for (i = 0; i < nfds; i++) {
+ if (fds[i].fd != bt_host_fd && fds[i].fd != timer_fd) {
+ fds[i].fd = new_fds[j].fd;
+ fds[i].revents = new_fds[j].revents;
+ j++;
+ }
+ }
+ free(new_fds);
+ return ret;
+}
+
+int open(const char *pathname, int flags)
+{
+ if (strcmp("/dev/bt-host", pathname) == 0) {
+ MSG_OUT("open(%s, %x)\n", pathname, flags);
+ bt_host_fd = socket(AF_UNIX, SOCK_STREAM, 0);
+ return bt_host_fd;
+ }
+ orig_open_t orig_open;
+ orig_open = (orig_open_t)dlsym(RTLD_NEXT, "open");
+ return orig_open(pathname, flags);
+}
+
+int read(int fd, void *buf, size_t count)
+{
+ if (fd == bt_host_fd) {
+ MSG_OUT("read(%d, %p, %ld)\n", fd, buf, count);
+
+ if (sent_id == -1)
+ sent_id = 0;
+ else
+ sent_id++;
+
+ MSG_OUT("Send msg id %d\n", sent_id);
+
+ if (count < data[sent_id].msg[0] + 1) {
+ /*
+ * TODO handle this, not urgent, the real driver also gets it
+ * wrong
+ */
+ MSG_ERR("Read size was too small\n");
+ errno = ENOMEM;
+ return -1;
+ }
+ if (sent_id == BTTEST_NUM - 1)
+ stop = 1;
+
+ memcpy(buf, data[sent_id].msg, data[sent_id].msg[0] + 1);
+ return data[sent_id].msg[0] + 1;
+ }
+
+ orig_read_t orig_read;
+ orig_read = (orig_read_t)dlsym(RTLD_NEXT, "read");
+ return orig_read(fd, buf, count);
+}
+
+int write(int fd, const void *buf, size_t count)
+{
+ if (fd == bt_host_fd) {
+ MSG_OUT("write(%d, %p, %ld)\n", fd, buf, count);
+ if (count == 5 && ((char *)buf)[4] == 0xce) {
+ MSG_ERR("CAUGHT A TIMEOUT!!!! 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", ((char *)buf)[0], ((char *)buf)[1], ((char *)buf)[2], ((char *)buf)[3], ((char *)buf)[4]);
+ exit(1);
+ }
+ if (memcmp(buf + 1, data[recv_id].msg + 1, count - 2) != 0) {
+ int j;
+
+ MSG_ERR("Bad response/inconsistent message index: %d\n", recv_id);
+ for (j = 0; j < count - 2; j++)
+ MSG_ERR("0x%02x vs 0x%02x\n", data[recv_id].msg[j + 1], ((char *)buf)[1 + j]);
+ } else {
+ MSG_OUT("Good response to message index: %d\n", recv_id);
+ data[recv_id].status = 2;
+ }
+ if (recv_id == BTTEST_NUM - 1) {
+ MSG_OUT("recieved a response to all messages, tentative success\n");
+ exit(0);
+ }
+ recv_id++;
+ return count;
+ }
+ orig_write_t orig_write;
+ orig_write = (orig_write_t)dlsym(RTLD_NEXT, "write");
+ return orig_write(fd, buf, count);
+}
+
+int timerfd_create(int clockid, int flags)
+{
+ orig_timerfd_create_t orig_timerfd_create;
+ orig_timerfd_create = (orig_timerfd_create_t)dlsym(RTLD_NEXT, "timerfd_create");
+ timer_fd = orig_timerfd_create(clockid, flags);
+ return timer_fd;
+}
diff --git a/ipmi-bouncer.c b/ipmi-bouncer.c
new file mode 100644
index 0000000..030cffb
--- /dev/null
+++ b/ipmi-bouncer.c
@@ -0,0 +1,131 @@
+#include <errno.h>
+#include <stdio.h>
+
+#include <systemd/sd-bus.h>
+
+#define PREFIX "[IPMI] "
+
+#define MSG_OUT(f_, ...) do { printf(PREFIX); printf((f_), ##__VA_ARGS__); } while(0)
+#define MSG_ERR(f_, ...) do { fprintf(stderr,PREFIX); fprintf(stderr, (f_), ##__VA_ARGS__); } while(0)
+
+sd_bus *bus;
+
+static int bttest_ipmi(sd_bus_message *req,
+ void *user_data, sd_bus_error *ret_error)
+{
+ sd_bus_error error = SD_BUS_ERROR_NULL;
+ sd_bus_message *reply = NULL, *m=NULL;
+ const char *dest, *path;
+ int r, pty;
+ unsigned char seq, netfn, lun, cmd;
+ uint8_t buf[1];
+
+ MSG_OUT("Got DBUS message\n");
+
+ r = sd_bus_message_read(req, "yyyy", &seq, &netfn, &lun, &cmd);
+ if (r < 0) {
+ MSG_ERR("FAIL ");
+ errno = -r;
+ perror("Couldn't read DBUS message");
+ return -1;
+ }
+
+ dest = sd_bus_message_get_sender(req);
+ path = sd_bus_message_get_path(req);
+
+ r = sd_bus_message_new_method_call(bus, &m, dest, path,
+ "org.openbmc.HostIpmi", "sendMessage");
+ if (r < 0) {
+ MSG_ERR("FAIL ");
+ errno = -r;
+ perror("Failed to add the method object");
+ return -1;
+ }
+
+ /* Send CMD twice */
+ r = sd_bus_message_append(m, "yyyyy", seq, netfn, lun, cmd, cmd);
+ if (r < 0) {
+ MSG_ERR("FAIL ");
+ errno = -r;
+ perror("Failed add the netfn and others");
+ return -1;
+ }
+
+ r = sd_bus_message_append_array(m, 'y', buf, 1);
+ if (r < 0) {
+ MSG_ERR("FAIL ");
+ errno = -r;
+ perror("Failed to add the string of response bytes");
+ return -1;
+ }
+
+ r = sd_bus_call(bus, m, 0, &error, &reply);
+ if (r < 0) {
+ MSG_ERR("FAIL ");
+ errno = -r;
+ perror("Failed to call the method");
+ return -1;
+ }
+
+ r = sd_bus_message_read(reply, "x", &pty);
+ if (r < 0) {
+ MSG_ERR("FAIL ");
+ errno = -r;
+ perror("Failed to get a rc from the method");
+ }
+
+ sd_bus_error_free(&error);
+ sd_bus_message_unref(m);
+
+ return 0;
+}
+
+int main(int argc, char *argv[])
+{
+ sd_bus_slot *slot;
+ int r;
+
+ /* Connect to system bus */
+ r = sd_bus_open_system(&bus);
+ if (r < 0) {
+ MSG_ERR("FAIL");
+ errno = -r;
+ perror("Failed to connect to system bus");
+ return 1;
+ }
+
+ r = sd_bus_add_match(bus, &slot, "type='signal',"
+ "interface='org.openbmc.HostIpmi',"
+ "member='ReceivedMessage'", bttest_ipmi, NULL);
+ if (r < 0) {
+ MSG_ERR("FAIL");
+ errno = -r;
+ perror("Failed: sd_bus_add_match");
+ goto finish;
+ }
+
+
+ for (;;) {
+ r = sd_bus_process(bus, NULL);
+ if (r < 0) {
+ MSG_ERR("FAIL");
+ errno = -r;
+ perror("Failed to process bus");
+ goto finish;
+ }
+
+ r = sd_bus_wait(bus, (uint64_t) - 1);
+ if (r < 0) {
+ MSG_ERR("FAIL");
+ errno = -r;
+ perror("Failed to wait on bus");
+ goto finish;
+ }
+ }
+
+finish:
+ sd_bus_slot_unref(slot);
+ sd_bus_unref(bus);
+
+ return 0;
+}
diff --git a/travis/build.sh b/travis/build.sh
index 79b0b5c..e330afd 100755
--- a/travis/build.sh
+++ b/travis/build.sh
@@ -1,9 +1,11 @@
#!/bin/bash
+set -evx
Dockerfile=$(cat << EOF
FROM ubuntu:15.10
RUN DEBIAN_FRONTEND=noninteractive apt-get update && apt-get upgrade -yy
RUN DEBIAN_FRONTEND=noninteractive apt-get install --no-install-recommends -yy make gcc libsystemd-dev libc6-dev pkg-config
+RUN mkdir /var/run/dbus
RUN groupadd -g ${GROUPS} ${USER} && useradd -d ${HOME} -m -u ${UID} -g ${GROUPS} ${USER}
USER ${USER}
ENV HOME ${HOME}
@@ -14,6 +16,9 @@ EOF
docker pull ubuntu:15.10
docker build -t temp - <<< "${Dockerfile}"
+sudo cp ./travis/org.openbmc.HostIpmi.conf.test /etc/dbus-1/system.d/org.openbmc.HostIpmi.conf
+sudo service dbus restart
+
gcc --version
mkdir -p linux
@@ -21,3 +26,7 @@ wget https://raw.githubusercontent.com/openbmc/linux/dev-4.3/include/uapi/linux/
docker run --cap-add=sys_admin --net=host --rm=true --user="${USER}" \
-w "${PWD}" -v "${HOME}":"${HOME}" -t temp make KERNEL_HEADERS=$PWD
+
+docker run --cap-add=sys_admin --net=host -v /var/run/dbus:/var/run/dbus --rm=true --user="${USER}" \
+ -w "${PWD}" -v "${HOME}":"${HOME}" -t temp ./travis/run_tests.sh
+
diff --git a/travis/org.openbmc.HostIpmi.conf.test b/travis/org.openbmc.HostIpmi.conf.test
new file mode 100644
index 0000000..196945f
--- /dev/null
+++ b/travis/org.openbmc.HostIpmi.conf.test
@@ -0,0 +1,20 @@
+<?xml version="1.0"?> <!--*-nxml-*-->
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration
+1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+
+<!--
+ This file is need to run openbmc bt bridge daemon.
+ Place this file in /etc/dbus-1/system.d/
+-->
+
+<busconfig>
+
+ <policy context="default">
+ <allow own="org.openbmc.HostIpmi"/>
+ <allow send_destination="org.openbmc.HostIpmi"/>
+ <allow receive_sender="org.openbmc.HostIpmi"/>
+ </policy>
+
+</busconfig>
+
diff --git a/travis/run_tests.sh b/travis/run_tests.sh
new file mode 100755
index 0000000..a391798
--- /dev/null
+++ b/travis/run_tests.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+set -evx
+make KERNEL_HEADERS=${PWD} test
+LD_PRELOAD=${PWD}/bt-host.so ./btbridged --vv &
+bridge_pid=$!
+
+./ipmi-bouncer &
+ipmi_pid=$!
+
+wait $bridge_pid
+exit_status=$?
+
+kill -9 $ipmi_pid
+
+exit $exit_status
--
2.8.1
More information about the openbmc
mailing list