January 2018 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Jan 2 16:49:08 AEDT 2018
Ending: Wed Jan 31 23:48:55 AEDT 2018
Messages: 163

• [Skiboot] [PATCH v4] power-mgmt : occ : Add 'freq-domain-indicator' DT property   Vasant Hegde
  • [Skiboot] [PATCH v4] power-mgmt : occ : Add 'freq-domain-indicator' DT property   Abhishek
• [Skiboot] [PATCH 0/9] p9_stop_api error handling   Akshay Adiga
  • [Skiboot] [PATCH 1/9] SLW: Delay cpuidle device-tree creation   Akshay Adiga
  • [Skiboot] [PATCH 2/9] SLW: Split init functions   Akshay Adiga
  • [Skiboot] [PATCH 3/9] SLW: Call slw_late_init_p{8, 9} only when has_wakeup_engine is set   Akshay Adiga
  • [Skiboot] [PATCH 5/9] SLW: Move MAMBO simulator checks to slw_init   Akshay Adiga
  • [Skiboot] [PATCH 9/9] SLW: Add p9_stop_api calls for IMC   Akshay Adiga
  • [Skiboot] [PATCH 0/9] p9_stop_api error handling   Stewart Smith
• [Skiboot] [PATCH 4/9] SLW: Use wakeup_engine state to handle errors in wakeup engine   Akshay Adiga
• [Skiboot] [PATCH 6/9] SLW: Detect if deep states are enabled   Akshay Adiga
• [Skiboot] [PATCH 7/9] SLW: Call p9_stop_api only if deep_states are enabled   Akshay Adiga
• [Skiboot] [PATCH 8/9] SCOM restore for DARN and XIVE   Akshay Adiga
• [Skiboot] [PATCH] hdata: Parse IPL FW feature settings   Oliver O'Halloran
  • [Skiboot] [PATCH] hdata: Parse IPL FW feature settings   Stewart Smith
• [Skiboot] [PATCH 1/9] npu2: Split out common helper functions into separate file   Stewart Smith
  • [Skiboot] [PATCH 1/9] npu2: Split out common helper functions into separate file   Alistair Popple
  • [Skiboot] [PATCH 1/9] npu2: Split out common helper functions into separate file   Frederic Barrat
    • [Skiboot] [PATCH 1/9] npu2: Split out common helper functions into separate file   Andrew Donnellan
• [Skiboot] [PATCH] Witherspoon: Remove old Witherspoon platform definition   Alistair Popple
  • [Skiboot] [PATCH] Witherspoon: Remove old Witherspoon platform definition   Andrew Donnellan
  • [Skiboot] [PATCH] Witherspoon: Remove old Witherspoon platform definition   Reza Arbab
  • [Skiboot] [PATCH] Witherspoon: Remove old Witherspoon platform definition   Oliver
    • [Skiboot] [PATCH] Witherspoon: Remove old Witherspoon platform definition   Alistair Popple
• [Skiboot] [PATCH] phb4: Dump CAPP error registers when it asserts link down   Vaibhav Jain
  • [Skiboot] [PATCH] phb4: Dump CAPP error registers when it asserts link down   Andrew Donnellan
  • [Skiboot] [PATCH] phb4: Dump CAPP error registers when it asserts link down   christophe lombard
  • [Skiboot] [PATCH] phb4: Dump CAPP error registers when it asserts link down   Russell Currey
  • [Skiboot] [PATCH] phb4: Dump CAPP error registers when it asserts link down   Stewart Smith
• [Skiboot] [PATCH v4 1/2] phb4: set PHB CMPM registers for tunneled operations   Philippe Bergheaud
  • [Skiboot] [PATCH v4 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Philippe Bergheaud
    • [Skiboot] [PATCH v4 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Frederic Barrat
    • [Skiboot] [PATCH v4 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   christophe lombard
    • [Skiboot] [PATCH v4 2/2] phb4: set PBCQ Tunnel BAR for tunneled operations   Philippe Bergheaud
  • [Skiboot] [PATCH v4 1/2] phb4: set PHB CMPM registers for tunneled operations   christophe lombard
  • [Skiboot] [PATCH v4 1/2] phb4: set PHB CMPM registers for tunneled operations   Philippe Bergheaud
• [Skiboot] [PATCH 2/9] npu2: Rework NPU data structures for OpenCAPI   Frederic Barrat
• [Skiboot] [PATCH 3/9] platform: Add fields for OpenCAPI platform data   Frederic Barrat
  • [Skiboot] [PATCH 3/9] platform: Add fields for OpenCAPI platform data   Andrew Donnellan
    • [Skiboot] [PATCH 3/9] platform: Add fields for OpenCAPI platform data   Andrew Donnellan
• [Skiboot] [PATCH 4/9] p9-adu: Implement update sequence for PowerBus Hotplug Mode Control   Frederic Barrat
  • [Skiboot] [PATCH 4/9] p9-adu: Implement update sequence for PowerBus Hotplug Mode Control   Andrew Donnellan
• [Skiboot] [PATCH 0/2] Enable reporting of frozen NVLink bricks   Alistair Popple
  • [Skiboot] [PATCH 1/2] npu2.c: Fix XIVE IRQ alignment   Alistair Popple
  • [Skiboot] [PATCH 2/2] npu2.c: Add PE error detection   Alistair Popple
  • [Skiboot] [PATCH 0/2] Enable reporting of frozen NVLink bricks   Stewart Smith
• [Skiboot] [PATCH v2] Witherspoon: Remove old Witherspoon platform definition   Alistair Popple
  • [Skiboot] [PATCH v2] Witherspoon: Remove old Witherspoon platform definition   Andrew Donnellan
  • [Skiboot] [PATCH v2] Witherspoon: Remove old Witherspoon platform definition   Oliver
  • [Skiboot] [PATCH v2] Witherspoon: Remove old Witherspoon platform definition   Stewart Smith
  • [Skiboot] [PATCH v2] Witherspoon: Remove old Witherspoon platform definition   Reza Arbab
• [Skiboot] [PATCH 5/9] npu2-opencapi: Configure NPU for OpenCAPI   Frederic Barrat
  • [Skiboot] [PATCH 5/9] npu2-opencapi: Configure NPU for OpenCAPI   Andrew Donnellan
• [Skiboot] [PATCH 6/9] npu2-hw-procedures: Add support for OpenCAPI PHY link training   Frederic Barrat
• [Skiboot] [PATCH 7/9] npu2-opencapi: Train OpenCAPI links and setup devices   Frederic Barrat
  • [Skiboot] [PATCH 7/9] npu2-opencapi: Train OpenCAPI links and setup devices   Andrew Donnellan
• [Skiboot] [PATCH 8/9] npu2-opencapi: Add OpenCAPI OPAL API calls   Frederic Barrat
• [Skiboot] [PATCH 9/9] platforms: Add OpenCAPI platform data and device tree nodes   Frederic Barrat
  • [Skiboot] [PATCH 9/9] platforms: Add OpenCAPI platform data and device tree nodes   Andrew Donnellan
  • [Skiboot] [PATCH 9/9] platforms: Add OpenCAPI platform data and device tree nodes   Stewart Smith
    • [Skiboot] [PATCH 9/9] platforms: Add OpenCAPI platform data and device tree nodes   Andrew Donnellan
      • [Skiboot] [PATCH 9/9] platforms: Add OpenCAPI platform data and device tree nodes   Andrew Donnellan
• [Skiboot] [PATCH] hdata/i2c: Fix 512Kb EEPROM size   Oliver O'Halloran
  • [Skiboot] [PATCH] hdata/i2c: Fix 512Kb EEPROM size   Stewart Smith
• [Skiboot] [PATCH] hdat/i2c: Fix SPD EEPROM compatible string   Oliver O'Halloran
  • [Skiboot] [PATCH] hdat/i2c: Fix SPD EEPROM compatible string   Stewart Smith
• [Skiboot] [PATCH] hdata/vpd: Fix DTC warnings   Oliver O'Halloran
  • [Skiboot] [PATCH] hdata/vpd: Fix DTC warnings   Stewart Smith
• [Skiboot] [PATCH 1/2] core: Avoid possible uninitialized pointer read (CID 209502)   Cyril Bur
  • [Skiboot] [PATCH 2/2] hdata/vpd: Remove possible dereference after null check (CID 207468)   Cyril Bur
    • [Skiboot] [PATCH 2/2] hdata/vpd: Remove possible dereference after null check (CID 207468)   Vasant Hegde
    • [Skiboot] [PATCH 2/2] hdata/vpd: Remove possible dereference after null check (CID 207468)   Oliver
  • [Skiboot] [PATCH 1/2] core: Avoid possible uninitialized pointer read (CID 209502)   Nicholas Piggin
• [Skiboot] [PATCH v2] opal/xstop: Use nvram option to enable/disable sw checkstop.   Stewart Smith
  • [Skiboot] [PATCH v2] opal/xstop: Use nvram option to enable/disable sw checkstop.   Oliver
    • [Skiboot] [PATCH v2] opal/xstop: Use nvram option to enable/disable sw checkstop.   Stewart Smith
    • [Skiboot] [PATCH v2] opal/xstop: Use nvram option to enable/disable sw checkstop.   Balbir Singh
• [Skiboot] [PATCH] ATTN: Enable flush instruction cache bit in HID register   Vasant Hegde
• [Skiboot] [RFC PATCH 1/2] hmi: Don't re-read HMER multiple times   Benjamin Herrenschmidt
  • [Skiboot] [RFC PATCH 2/2] hmi: Remove races in clearing HMER   Benjamin Herrenschmidt
    • [Skiboot] [RFC PATCH 2/2] hmi: Remove races in clearing HMER   Mahesh Jagannath Salgaonkar
  • [Skiboot] [RFC PATCH 1/2] hmi: Don't re-read HMER multiple times   Mahesh Jagannath Salgaonkar
• [Skiboot] hwmon sensors cleanup   Stewart Smith
  • [Skiboot] hwmon sensors cleanup   Shilpasri G Bhat
    • [Skiboot] hwmon sensors cleanup   Stewart Smith
• [Skiboot] [PATCH] capi: Disable CAPP virtual machines   Vaibhav Jain
  • [Skiboot] [PATCH] capi: Disable CAPP virtual machines   Andrew Donnellan
    • [Skiboot] [PATCH] capi: Disable CAPP virtual machines   Vaibhav Jain
• [Skiboot] [PATCH] core: hostservices: Remove redundant special wakeup code   Shilpasri G Bhat
• [Skiboot] [PATCH] hw/npu2: support creset of npu2 devices   Balbir Singh
• [Skiboot] [PATCH 1/2] hw/npu2: Implement logging HMI actions   Balbir Singh
• [Skiboot] [PATCH] DT: Add "IBM" version property under ibm, firmware-versions node   Stewart Smith
• [Skiboot] [PATCH][RFC] powerpc/powernv: Taking non-maskable interrupts in OPAL   Nicholas Piggin
• [Skiboot] [PATCH][RFC] opal: allow some opal calls to re-enter OPAL in case we take a NMI   Nicholas Piggin
• [Skiboot] [PATCH v5] power-mgmt : occ : Add 'freq-domain-indicator' DT property   Abhishek Goel
• [Skiboot] [PATCH-RESEND] capi: Disable CAPP virtual machines   Vaibhav Jain
  • [Skiboot] [PATCH-RESEND] capi: Disable CAPP virtual machines   Andrew Donnellan
  • [Skiboot] [PATCH-RESEND] capi: Disable CAPP virtual machines   christophe lombard
    • [Skiboot] [PATCH-RESEND] capi: Disable CAPP virtual machines   Vaibhav Jain
  • [Skiboot] [PATCH-RESEND] capi: Disable CAPP virtual machines   christophe lombard
• [Skiboot] [PATCH] capi: Perform capp recovery sequence only when PBCQ is idle   Vaibhav Jain
  • [Skiboot] [PATCH] capi: Perform capp recovery sequence only when PBCQ is idle   Andrew Donnellan
  • [Skiboot] [PATCH] capi: Perform capp recovery sequence only when PBCQ is idle   christophe lombard
• [Skiboot] [PATCH v2] DT: Add "version" property under ibm, firmware-versions node   Vasant Hegde
• [Skiboot] [PATCH] hdata/vpd: Add vendor property   Vasant Hegde
• [Skiboot] [PATCH] libstb/cvc: Register P8 secure ROM code correctly   Stewart Smith
• [Skiboot] [PATCH v2 0/9] Initial OpenCAPI 3.0 Support for P9   Andrew Donnellan
  • [Skiboot] [PATCH v2 2/9] npu2: Rework NPU data structures for OpenCAPI   Andrew Donnellan
  • [Skiboot] [PATCH v2 3/9] platform: Add fields for OpenCAPI platform data   Andrew Donnellan
  • [Skiboot] [PATCH v2 4/9] p9-adu: Implement update sequence for PowerBus Hotplug Mode Control   Andrew Donnellan
  • [Skiboot] [PATCH v2 5/9] npu2-opencapi: Configure NPU for OpenCAPI   Andrew Donnellan
    • [Skiboot] [PATCH v2 5/9] npu2-opencapi: Configure NPU for OpenCAPI   Frederic Barrat
  • [Skiboot] [PATCH v2 6/9] npu2-hw-procedures: Add support for OpenCAPI PHY link training   Andrew Donnellan
  • [Skiboot] [PATCH v2 7/9] npu2-opencapi: Train OpenCAPI links and setup devices   Andrew Donnellan
  • [Skiboot] [PATCH v2 8/9] npu2-opencapi: Add OpenCAPI OPAL API calls   Andrew Donnellan
    • [Skiboot] [PATCH v2 8/9] npu2-opencapi: Add OpenCAPI OPAL API calls   Andrew Donnellan
  • [Skiboot] [PATCH v2 9/9] platforms: Add OpenCAPI platform data and device tree nodes   Andrew Donnellan
    • [Skiboot] [PATCH v2 9/9] platforms: Add OpenCAPI platform data and device tree nodes   Frederic Barrat
• [Skiboot] [PATCH v2 1/9] npu2: Split out common helper functions into separate file   Andrew Donnellan
  • [Skiboot] [PATCH v2 1/9] npu2: Split out common helper functions into separate file   Frederic Barrat
• [Skiboot] [PATCH 1/2] sensors: occ: Skip GPU sensors for non-gpu systems   Shilpasri G Bhat
  • [Skiboot] [PATCH 2/2] sensors: occ: Skip power sensors with zero sample value   Shilpasri G Bhat
• [Skiboot] [PATCH] capi: Poll Err/Status register during CAPP recovery   Vaibhav Jain
  • [Skiboot] [PATCH] capi: Poll Err/Status register during CAPP recovery   christophe lombard
• [Skiboot] [PATCH] xive: Mask MMIO load/store to bad location FIR   Frederic Barrat
  • [Skiboot] [PATCH] xive: Mask MMIO load/store to bad location FIR   Cédric Le Goater
  • [Skiboot] [PATCH] xive: Mask MMIO load/store to bad location FIR   Andrew Donnellan
• [Skiboot] [PATCH 1/2] npu2-hw-procedures.c: Power up lanes during ntl reset   Alistair Popple
  • [Skiboot] [PATCH 2/2] npu2-hw-procedures.c: Correct phy lane mapping   Alistair Popple
    • [Skiboot] [PATCH 2/2] npu2-hw-procedures.c: Correct phy lane mapping   Frederic Barrat
      • [Skiboot] [PATCH 2/2] npu2-hw-procedures.c: Correct phy lane mapping   Andrew Donnellan
    • [Skiboot] [PATCH 2/2] npu2-hw-procedures.c: Correct phy lane mapping   Reza Arbab
  • [Skiboot] [PATCH 1/2] npu2-hw-procedures.c: Power up lanes during ntl reset   Frederic Barrat
  • [Skiboot] [PATCH 1/2] npu2-hw-procedures.c: Power up lanes during ntl reset   Reza Arbab
• [Skiboot] [PATCH] witherspoon: Fix VPD EEPROM type   Oliver O'Halloran
• [Skiboot] [PATCH 0/2] Fix p9_stop_api mtspr instruction generation   Stewart Smith
  • [Skiboot] [PATCH 1/2] Revert "libpore: Fix incorrect mtspr instruction generation"   Stewart Smith
    • [Skiboot] [PATCH 1/2] Revert "libpore: Fix incorrect mtspr instruction generation"   Vaidyanathan Srinivasan
      • [Skiboot] [PATCH 1/2] Revert "libpore: Fix incorrect mtspr instruction generation"   Vaidyanathan Srinivasan
  • [Skiboot] [PATCH 2/2] PM: Fixed generation of MTSPR instruction in STOP API.   Stewart Smith
    • [Skiboot] [PATCH 2/2] PM: Fixed generation of MTSPR instruction in STOP API.   Vaidyanathan Srinivasan
  • [Skiboot] [PATCH 0/2] Fix p9_stop_api mtspr instruction generation   Stewart Smith
• [Skiboot] [PATCH] Fix FTBFS with -Werror=format-overflow   Frédéric Bonnard
  • [Skiboot] [PATCH] Fix FTBFS with -Werror=format-overflow   Andrew Donnellan
    • [Skiboot] [PATCH] Fix FTBFS with -Werror=format-overflow   Frédéric Bonnard
    • [Skiboot] [PATCH v2] Fix FTBFS with -Werror=format-overflow   Frédéric Bonnard
• [Skiboot] [PATCH] Fix xscom-utils clean target   Frédéric Bonnard
  • [Skiboot] [PATCH v2] Fix xscom-utils distclean target   Frédéric Bonnard
• [Skiboot] [PATCH] Add man pages for xscom-utils and pflash   Frédéric Bonnard
• [Skiboot] [PATCH] capi: Enable channel tag streaming for PHB in CAPP mode   Vaibhav Jain
  • [Skiboot] [PATCH] capi: Enable channel tag streaming for PHB in CAPP mode   Andrew Donnellan
  • [Skiboot] [PATCH] capi: Enable channel tag streaming for PHB in CAPP mode   christophe lombard
• [Skiboot] [PATCH v3 00/10] Initial OpenCAPI 3.0 Support for P9   Andrew Donnellan
  • [Skiboot] [PATCH v3 01/10] npu2: Split out common helper functions into separate file   Andrew Donnellan
  • [Skiboot] [PATCH v3 02/10] npu2: Rework NPU data structures for OpenCAPI   Andrew Donnellan
  • [Skiboot] [PATCH v3 04/10] p9-adu: Implement update sequence for PowerBus Hotplug Mode Control   Andrew Donnellan
  • [Skiboot] [PATCH v3 05/10] npu2-opencapi: Configure NPU for OpenCAPI   Andrew Donnellan
  • [Skiboot] [PATCH v3 07/10] npu2-opencapi: Train OpenCAPI links and setup devices   Andrew Donnellan
  • [Skiboot] [PATCH v3 08/10] npu2-opencapi: Add OpenCAPI OPAL API calls   Andrew Donnellan
  • [Skiboot] [PATCH v3 10/10] doc/device-tree: Add OpenCAPI device tree bindings   Andrew Donnellan
• [Skiboot] [PATCH v3 03/10] platform: Add fields for OpenCAPI platform data   Andrew Donnellan
• [Skiboot] [PATCH v3 06/10] npu2-hw-procedures: Add support for OpenCAPI PHY link training   Andrew Donnellan
• [Skiboot] [PATCH v3 09/10] platforms: Add OpenCAPI platform data and device tree nodes   Andrew Donnellan

Last message date: Wed Jan 31 23:48:55 AEDT 2018
Archived on: Wed Jan 31 23:49:26 AEDT 2018

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...