April 2017 Archives by date
Starting: Sat Apr 1 03:52:35 AEDT 2017
Ending: Fri Apr 28 18:01:15 AEST 2017
Messages: 261
- [Skiboot] [PATCH V2 0/5] capi: Add support for Coherent Accelerator Interface Architecture 2.0
Christophe Lombard
- [Skiboot] [PATCH V2 1/5] capi: Externalize capp timebase synchronization
Christophe Lombard
- [Skiboot] [PATCH V2 2/5] capi: Move phb3 capp registers to specialized files
Christophe Lombard
- [Skiboot] [PATCH V2 3/5] capi: Enable capi mode
Christophe Lombard
- [Skiboot] [PATCH V2 4/5] capi: Load capp microcode
Christophe Lombard
- [Skiboot] [PATCH V2 5/5] capi: Handle HMI events
Christophe Lombard
- [Skiboot] [PATCH] occ: irq: Fix SCOM address for OCC_MISC register
Shilpasri G Bhat
- [Skiboot] [PATCH V3 0/5] Enable NX 842 and gzip compression engines on Power9
Haren Myneni
- [Skiboot] [PATCH V3 1/5] NX: Add P9 NX register defines for 842 / gzip engines
Haren Myneni
- [Skiboot] [PATCH V3 2/5] NX: Organize NX compression code to include 842 and gzip engines support
Haren Myneni
- [Skiboot] [PATCH V3 3/5] NX: Add P9 NX support for 842 compression engine
Haren Myneni
- [Skiboot] [PATCH V3 4/5] NX: Add P9 NX support for gzip compression engine
Haren Myneni
- [Skiboot] [PATCH V3 5/5] NX: Describe device-tree changes for P9 NX compression engines
Haren Myneni
- [Skiboot] [PATCH V7 3/3] occ: Add support for Version 0x90 OCC_OPAL shared memory region
Shilpasri G Bhat
- [Skiboot] [PATCH] occ: irq: Fix SCOM address for OCC_MISC register
Benjamin Herrenschmidt
- [Skiboot] [PATCH] occ: Skip setting cores to nominal frequency in P9
Shilpasri G Bhat
- [Skiboot] [PATCH v2] platform/astbmc: Do not delete compatible property
Vasant Hegde
- [Skiboot] [PATCH v3] platform/astbmc: Do not delete compatible property
Vasant Hegde
- [Skiboot] [PATCH 1/4] hdat: Populate model property with 'Unknown' in error path
Vasant Hegde
- [Skiboot] [PATCH 2/4] hdat: Read description from ibm, vpd binary blob
Vasant Hegde
- [Skiboot] [PATCH 3/4] hdat: Add model-name property for OpenPower system
Vasant Hegde
- [Skiboot] [PATCH 4/4] hdat: Use dt_add_property_nstr instead of duplicating code
Vasant Hegde
- [Skiboot] [PATCH RESEND] platforms/astbmc: Don't validate model on palmetto
Gavin Shan
- [Skiboot] [PATCH v5 5/7] vas: Create device tree node
Stewart Smith
- [Skiboot] [PATCH V2 1/5] capi: Externalize capp timebase synchronization
Andrew Donnellan
- [Skiboot] [PATCH] hw/fsp/rtc: read/write cached rtc tod on fsp hir.
Pridhiviraj Paidipeddi
- [Skiboot] [PATCH V2 4/5] capi: Load capp microcode
Stewart Smith
- [Skiboot] [PATCH V2 2/5] capi: Move phb3 capp registers to specialized files
Andrew Donnellan
- [Skiboot] [PATCH] occ: Skip setting cores to nominal frequency in P9
ppaidipe
- [Skiboot] [PATCH] hw/fsp/rtc: read/write cached rtc tod on fsp hir.
Vasant Hegde
- [Skiboot] [PATCH v8 00/10] skiboot: OPAL support for IMC instrumentation
Madhavan Srinivasan
- [Skiboot] [PATCH v8 01/10] dt: Add helper function for last_phandle updates
Madhavan Srinivasan
- [Skiboot] [PATCH v8 02/10] dt: Add phandle fixup helpers
Madhavan Srinivasan
- [Skiboot] [PATCH v8 03/10] skiboot: Add chip id to HOMER reserved region
Madhavan Srinivasan
- [Skiboot] [PATCH v8 04/10] skiboot: Nest IMC macro definitions
Madhavan Srinivasan
- [Skiboot] [PATCH v8 05/10] skiboot: Add a library for xz
Madhavan Srinivasan
- [Skiboot] [PATCH v8 06/10] skiboot: Find the IMC DTB
Madhavan Srinivasan
- [Skiboot] [PATCH v8 07/10] skiboot: Add opal call to enable/disable Nest IMC
Madhavan Srinivasan
- [Skiboot] [PATCH v8 08/10] skiboot: Add core IMC related counter configuration OPAL call
Madhavan Srinivasan
- [Skiboot] [PATCH v8 09/10] skiboot: Add documentation for nest IMC opal call
Madhavan Srinivasan
- [Skiboot] [PATCH v8 10/10] skiboot: Add documentation for the Core IMC opal call
Madhavan Srinivasan
- [Skiboot] [PATCH] occ: irq: Fix SCOM address for OCC_MISC register
Michael Neuling
- [Skiboot] [PATCH V2 4/5] capi: Load capp microcode
Frederic Barrat
- [Skiboot] [PATCH v5 5/7] vas: Create device tree node
Sukadev Bhattiprolu
- [Skiboot] [PATCH V2 4/5] capi: Load capp microcode
Stewart Smith
- [Skiboot] [PATCH] external/mambo: add helper for machine checks
Michael Ellerman
- [Skiboot] [PATCH] xive: Synchronize after disable IRQs in opal_xive_reset()
Benjamin Herrenschmidt
- [Skiboot] [RFC/PATCH] affinity: Use fabric node ID on most systems
Benjamin Herrenschmidt
- [Skiboot] skiboot-5.5.0-rc2 released
Stewart Smith
- [Skiboot] [PATCH] core/init: Use '_' as separator in names of "exports" properties
Michael Ellerman
- [Skiboot] [PATCH] hdata: fix reservation size
Oliver O'Halloran
- [Skiboot] [PATCH] hw/occ: Log proper SCOM register names
Pridhiviraj Paidipeddi
- [Skiboot] [PATCH] hw/phb[3/4]: Increase the severity level for pcie slot link timeouts
Pridhiviraj Paidipeddi
- [Skiboot] [PATCH] hw/fsp/rtc: read/write cached rtc tod on fsp hir.
Ananth N Mavinakayanahalli
- [Skiboot] [PATCH V2 4/5] capi: Load capp microcode
Frederic Barrat
- [Skiboot] [PATCH] xive: Fix setting of remote NVT VSD
Benjamin Herrenschmidt
- [Skiboot] [PATCH 1/2] interrupts: Add an "irq_for_each_source" iterator
Benjamin Herrenschmidt
- [Skiboot] [PATCH 2/2] xive: Fixes/improvements to xive reset for multi-chip systems
Benjamin Herrenschmidt
- [Skiboot] [PATCH] mambo: Add util function for breaking on console output
Michael Ellerman
- [Skiboot] [PATCH] mambo: Allow setting the Linux command line from the environment
Michael Ellerman
- [Skiboot] [PATCH 1/4] hdat: Populate model property with 'Unknown' in error path
Stewart Smith
- [Skiboot] [PATCH] hdata: fix reservation size
Stewart Smith
- [Skiboot] [PATCH] core/init: Use '_' as separator in names of "exports" properties
Stewart Smith
- [Skiboot] [PATCH] xive: Fix setting of remote NVT VSD
Stewart Smith
- [Skiboot] skiboot-5.5.0-rc3 released
Stewart Smith
- [Skiboot] [PATCH] asm: do not set SDR1 on POWER9
Nicholas Piggin
- [Skiboot] [PATCH 0/1] libstb/create-container: Add full container build
Dave Heller
- [Skiboot] [PATCH 1/1] libstb/create-container: Add full container build and sign with imprint keys
Dave Heller
- [Skiboot] [PATCH 0/4] libflash/blocklevel erase features
Cyril Bur
- [Skiboot] [PATCH 1/4] libflash/blocklevel: Add blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH 2/4] libflash: Add tests for blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH 3/4] external/gard: Use blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH 4/4] external/pflash: Use blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH 1/2] device: add dt_find_by_name_addr
Oliver O'Halloran
- [Skiboot] [PATCH 2/2] hdat: parse processor attached i2c devices
Oliver O'Halloran
- [Skiboot] [PATCH 1/2] device: add dt_find_by_name_addr
Vasant Hegde
- [Skiboot] [PATCH V2] occ: irq: Fix SCOM address and irq reasons for OCC_MISC register
Shilpasri G Bhat
- [Skiboot] [PATCH v8 00/10] skiboot: OPAL support for IMC instrumentation
Stewart Smith
- [Skiboot] [PATCH skiboot] npu: Implement FLR
Alexey Kardashevskiy
- [Skiboot] [PATCH 1/2] OPAL/FWTS: Power Management DT Validation tests
Pridhiviraj Paidipeddi
- [Skiboot] [PATCH 2/2] OPAL/FWTS: Reserved memory DT validation tests.
Pridhiviraj Paidipeddi
- [Skiboot] [PATCH v8 02/10] dt: Add phandle fixup helpers
Stewart Smith
- [Skiboot] [PATCH v8 02/10] dt: Add phandle fixup helpers
Benjamin Herrenschmidt
- [Skiboot] [PATCH 0/4] PCI: Use Cached Vendor/Device/Class ID
Gavin Shan
- [Skiboot] [PATCH 1/4] core/pci: Use cached vendor/device IDs in quirks
Gavin Shan
- [Skiboot] [PATCH 2/4] hw/phb3: Use cached vendor/device IDs in phb3_check_device_quirks()
Gavin Shan
- [Skiboot] [PATCH 3/4] core/pci: Use cached vendor/device/class IDs on populating device node
Gavin Shan
- [Skiboot] [PATCH 4/4] core/pci: Use macro as vendor ID register offset
Gavin Shan
- [Skiboot] [PATCH V2] occ: irq: Fix SCOM address and irq reasons for OCC_MISC register
Stewart Smith
- [Skiboot] [PATCH V2 4/5] capi: Load capp microcode
Stewart Smith
- [Skiboot] [PATCH 2/2] hdat: parse processor attached i2c devices
Vasant Hegde
- [Skiboot] [PATCH skiboot v2] npu: Implement FLR
Alexey Kardashevskiy
- [Skiboot] [PATCH] mambo: Add util function for breaking on console output
Stewart Smith
- [Skiboot] [PATCH] mambo: Allow setting the Linux command line from the environment
Stewart Smith
- [Skiboot] [PATCH] asm: do not set SDR1 on POWER9
Stewart Smith
- [Skiboot] [PATCH 1/1] libstb/create-container: Add full container build and sign with imprint keys
Stewart Smith
- [Skiboot] [PATCH 0/4] libflash/blocklevel erase features
Stewart Smith
- [Skiboot] [PATCH 2/2] hdat: parse processor attached i2c devices
Stewart Smith
- [Skiboot] [PATCH V2] occ: irq: Fix SCOM address and irq reasons for OCC_MISC register
Vaidyanathan Srinivasan
- [Skiboot] [PATCH 1/2] interrupts: Add an "irq_for_each_source" iterator
Benjamin Herrenschmidt
- [Skiboot] [PATCH 2/2] xive: Fixes/improvements to xive reset for multi-chip systems
Benjamin Herrenschmidt
- [Skiboot] skiboot 5.5.0 released!
Stewart Smith
- [Skiboot] [PATCH V2 5/5] capi: Handle HMI events
Andrew Donnellan
- [Skiboot] Stewart on vacation, skiboot maintenance
Stewart Smith
- [Skiboot] [PATCH V3] occ: irq: Fix SCOM address and irq reasons for OCC_MISC register
Shilpasri G Bhat
- [Skiboot] [PATCH 1/2] OPAL/FWTS: Power Management DT Validation tests
Vaidyanathan Srinivasan
- [Skiboot] [PATCH 2/2] OPAL/FWTS: Reserved memory DT validation tests.
Vaidyanathan Srinivasan
- [Skiboot] [PATCH 0/2] Add a dt property for flash erase
William A. Kennington III
- [Skiboot] [PATCH 1/2] blocklevel_info: Refactor the passing of output data
William A. Kennington III
- [Skiboot] [PATCH 2/2] flash: Add dt entries for flash that doesn't need erase
William A. Kennington III
- [Skiboot] [PATCH 0/2] Add a dt property for flash erase
William A. Kennington III
- [Skiboot] [PATCH 1/2] blocklevel_info: Refactor the passing of output data
William A. Kennington III
- [Skiboot] [PATCH 2/2] flash: Add dt entries for flash that doesn't need erase
William A. Kennington III
- [Skiboot] [PATCH 1/2] OPAL/FWTS: Power Management DT Validation tests
ppaidipe
- [Skiboot] [PATCH 2/2] OPAL/FWTS: Reserved memory DT validation tests.
ppaidipe
- [Skiboot] [PATCH 0/4] Initial EEH support for PHB4
Russell Currey
- [Skiboot] [PATCH 1/4] phb4: Implement diag data
Russell Currey
- [Skiboot] [PATCH 2/4] phb4: Implement fence check
Russell Currey
- [Skiboot] [PATCH 3/4] phb4: Enable EEH for MMIO
Russell Currey
- [Skiboot] [PATCH 4/4] phb4: Fix M32 window mapping
Russell Currey
- [Skiboot] [PATCH skiboot v2] npu: Implement FLR
Alistair Popple
- [Skiboot] [PATCH 2/4] libflash: Add tests for blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH skiboot v3] npu: Implement FLR
Alexey Kardashevskiy
- [Skiboot] [RFC][PATCH v2] cpufeatures: add base and POWER8, POWER9 /cpus/cpufeatures dt
Nicholas Piggin
- [Skiboot] [PATCH] nx: Add POWER9 DARN support
Michael Neuling
- [Skiboot] [PATCH V3] occ: irq: Fix SCOM address and irq reasons for OCC_MISC register
Michael Neuling
- [Skiboot] [PATCH] hdata/i2c: Workaround broken i2c devices
Oliver O'Halloran
- [Skiboot] [PATCH] hdata/i2c: Workaround broken i2c devices
Michael Neuling
- [Skiboot] [PATCH v2] hdata/i2c: Workaround broken i2c devices
Oliver O'Halloran
- [Skiboot] [PATCH v2] hdata/i2c: Workaround broken i2c devices
Michael Neuling
- [Skiboot] [PATCH 4/4] phb4: Fix M32 window mapping
Michael Neuling
- [Skiboot] [PATCH] xive: Clear emulation mode queue on reset
Benjamin Herrenschmidt
- [Skiboot] [PATCH]add p9dsu platform file
Jim Yuan
- [Skiboot] [PATCH 0/4] libflash blocklevel ECC corrections
Cyril Bur
- [Skiboot] [PATCH 1/4] libflash/ecc: Add functions to deal with unaligned ECC memcpy
Cyril Bur
- [Skiboot] [PATCH 2/4] libflash/ecc: Add helpers to align a position within an ecc buffer
Cyril Bur
- [Skiboot] [PATCH 3/4] libflash/blocklevel: Return region start from ecc_protected()
Cyril Bur
- [Skiboot] [PATCH 4/4] libflash/blocklevel: Make read/write be ECC agnostic for callers
Cyril Bur
- [Skiboot] [PATCH v4 0/5] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v4 1/5] hdata: Add PNOR info structure
Vasant Hegde
- [Skiboot] [PATCH v4 2/5] hdat: Add 'primary' property to master chip xscom node
Vasant Hegde
- [Skiboot] [PATCH v4 3/5] Move P8 timer code to separate file
Vasant Hegde
- [Skiboot] [PATCH v4 4/5] Add SBE driver support
Vasant Hegde
- [Skiboot] [PATCH v4 5/5] SBE: Add timer support
Vasant Hegde
- [Skiboot] [PATCH][OPAL] cpu-features: add base and POWER8, POWER9 /cpus/ibm, powerpc-cpu-features dt
Nicholas Piggin
- [Skiboot] [PATCH v2 0/5] libflash/blocklevel erase features
Cyril Bur
- [Skiboot] [PATCH v2 1/5] libflash/file: Only use 64bit MTD erase ioctl() when needed
Cyril Bur
- [Skiboot] [PATCH v2 2/5] libflash/blocklevel: Add blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH v2 3/5] libflash: Add tests for blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH v2 4/5] external/gard: Use blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH v2 5/5] external/pflash: Use blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH 1/2] SBE: Add passthrough command support
Vasant Hegde
- [Skiboot] [PATCH 2/2] opal-prd: Handle SBE passthrough message passing
Vasant Hegde
- [Skiboot] [PATCH v2 1/5] libflash/file: Only use 64bit MTD erase ioctl() when needed
Samuel Mendoza-Jonas
- [Skiboot] [PATCH v2 1/5] libflash/file: Only use 64bit MTD erase ioctl() when needed
Cyril Bur
- [Skiboot] [PATCH] xive: Synchronize after disable IRQs in opal_xive_reset()
Michael Neuling
- [Skiboot] [PATCH 2/2] xive: Fixes/improvements to xive reset for multi-chip systems
Michael Neuling
- [Skiboot] [PATCH] xive: Clear emulation mode queue on reset
Michael Neuling
- [Skiboot] [PATCH v2 0/5] Initial EEH support for PHB4
Russell Currey
- [Skiboot] [PATCH v2 1/5] phb4: Expand and clean up register definitions
Russell Currey
- [Skiboot] [PATCH v2 2/5] phb4: Implement diag data
Russell Currey
- [Skiboot] [PATCH v2 3/5] phb4: Implement fence check
Russell Currey
- [Skiboot] [PATCH v2 4/5] phb4: Enable EEH for MMIO
Russell Currey
- [Skiboot] [PATCH v2 5/5] phb4: Make M32 segment mappings two-to-one
Russell Currey
- [Skiboot] [PATCH] xive: Make no_sync parameter affermative in __xive_set_irq_config()
Michael Neuling
- [Skiboot] [PATCH v2 0/5] Initial EEH support for PHB4
Benjamin Herrenschmidt
- [Skiboot] [PATCH v2 0/5] Initial EEH support for PHB4
Michael Neuling
- [Skiboot] [PATCH] power9-dd1:slw: Modify the stop0_lite latency & residency.
Gautham R. Shenoy
- [Skiboot] [PATCH 0/4] libflash/blocklevel erase features
Cyril Bur
- [Skiboot] [PATCH] phb4: Add an option for disabling EEH MMIO in nvram
Russell Currey
- [Skiboot] [PATCH] hdata: indicate when booted with elevated risk level
Oliver O'Halloran
- [Skiboot] [PATCH 0/2] Only use 64bit MTD erase ioctl() when needed
Cyril Bur
- [Skiboot] [PATCH 1/2] libflash/file: Only use 64bit MTD erase ioctl() when needed
Cyril Bur
- [Skiboot] [PATCH 2/2] libflash: More tests for blocklevel_smart_erase()
Cyril Bur
- [Skiboot] [PATCH] phb4: Add an option for disabling EEH MMIO in nvram
Gavin Shan
- [Skiboot] [PATCH] phb4: Add an option for disabling EEH MMIO in nvram
Russell Currey
- [Skiboot] [PATCH] phb4: Add an option for disabling EEH MMIO in nvram
Michael Neuling
- [Skiboot] [PATCH] phb4: Add an option for disabling EEH MMIO in nvram
Russell Currey
- [Skiboot] [PATCH 1/2] libflash/file: Only use 64bit MTD erase ioctl() when needed
Michael Neuling
- [Skiboot] [PATCH 2/2] libflash: More tests for blocklevel_smart_erase()
Michael Neuling
- [Skiboot] [PATCH 1/2] libflash/file: Only use 64bit MTD erase ioctl() when needed
Cyril Bur
- [Skiboot] [PATCH] platform: Add p9dsu
Michael Neuling
- [Skiboot] [PATCH v2] libflash/file: Only use 64bit MTD erase ioctl() when needed
Cyril Bur
- [Skiboot] [PATCH] phb4: Add an option for disabling EEH MMIO in nvram
Michael Neuling
- [Skiboot] [PATCH v2] libflash/file: Only use 64bit MTD erase ioctl() when needed
Alistair Popple
- [Skiboot] [PATCH] platform: Add p9dsu
Michael Neuling
- [Skiboot] [PATCH v2] libflash/file: Only use 64bit MTD erase ioctl() when needed
Michael Neuling
- [Skiboot] [PATCH] power9-dd1:slw: Modify the stop0_lite latency & residency.
Michael Neuling
- [Skiboot] [PATCH] pci: Describe PHB diag data size in device tree
Russell Currey
- [Skiboot] [PATCH] console: Set log level from nvram
Michael Neuling
- [Skiboot] [PATCH] console: Set log level from nvram
Cyril Bur
- [Skiboot] [PATCH V4] sensors: occ: Add support for OCC inband sensors
Shilpasri G Bhat
- [Skiboot] [PATCH V4] sensors: occ: Add support for OCC inband sensors
Cédric Le Goater
- [Skiboot] [PATCH] xive: Don't double EOI interrupts that have an EOI override
Benjamin Herrenschmidt
- [Skiboot] [PATCH] mbox: Sanitize interrupts registers
Benjamin Herrenschmidt
- [Skiboot] [PATCH] xive: Fix potential for lost IPIs when manipulating CPPR
Benjamin Herrenschmidt
- [Skiboot] [PATCH] pci: Describe PHB diag data size in device tree
Gavin Shan
- [Skiboot] [PATCH] mbox: Sanitize interrupts registers
Cyril Bur
- [Skiboot] [PATCH] mbox: Sanitize interrupts registers
Benjamin Herrenschmidt
- [Skiboot] [PATCH] xive: Fix potential for lost IPIs when manipulating CPPR
Michael Neuling
- [Skiboot] [PATCH] xive: Don't double EOI interrupts that have an EOI override
Michael Neuling
- [Skiboot] [PATCH] mbox: Sanitize interrupts registers
Michael Neuling
- [Skiboot] [PATCH] xive: Fix potential for lost IPIs when manipulating CPPR
Michael Neuling
- [Skiboot] [PATCH 1/3] xive: Check queues for duplicates in DEBUG builds
Benjamin Herrenschmidt
- [Skiboot] [PATCH 2/3] xive: Add a per-cpu logging mechanism to XICS emulation
Benjamin Herrenschmidt
- [Skiboot] [PATCH 3/3] xive: Log more information in opal_xive_dump() for emulation state
Benjamin Herrenschmidt
- [Skiboot] [PATCH] power9-dd1:slw: Modify the stop0_lite latency & residency.
Gautham R Shenoy
- [Skiboot] [PATCH] dt: add ibm, tlbiel-congruence-classes-(hash|radix) for tlbiel IS!=0
Nicholas Piggin
- [Skiboot] [PATCH] dt: add /cpus/ibm, powerpc-cpu-features device tree bindings
Nicholas Piggin
- [Skiboot] [PATCH] dt: add ibm, tlbiel-congruence-classes-(hash|radix) for tlbiel IS!=0
Benjamin Herrenschmidt
- [Skiboot] [PATCH] dt: add ibm, tlbiel-congruence-classes-(hash|radix) for tlbiel IS!=0
Nicholas Piggin
- [Skiboot] [PATCH] dt: add ibm, tlbiel-congruence-classes-(hash|radix) for tlbiel IS!=0
Benjamin Herrenschmidt
- [Skiboot] [PATCH 1/3] prd: Fix PRD scoms for P9
Oliver O'Halloran
- [Skiboot] [PATCH 2/3] prd: clean up prd messaging
Oliver O'Halloran
- [Skiboot] [PATCH 3/3] ibm-fsp: use opal-prd on p9 and above
Oliver O'Halloran
- [Skiboot] [PATCH V4] prd: Fix PRD scoms for P9
Ananth N Mavinakayanahalli
- [Skiboot] [PATCH 1/5] hdata/i2c: Fix bus and clock frequencies
Benjamin Herrenschmidt
- [Skiboot] [PATCH 2/5] i2c: Improve logging
Benjamin Herrenschmidt
- [Skiboot] [PATCH 3/5] i2c: Log the engine clock frequency at boot
Benjamin Herrenschmidt
- [Skiboot] [PATCH 4/5] i2c: Remove old hack for bad clock frequency
Benjamin Herrenschmidt
- [Skiboot] [PATCH 5/5] i2c: Add interrupts support on P9
Benjamin Herrenschmidt
- [Skiboot] [PATCH v5 5/7] vas: Create device tree node
Benjamin Herrenschmidt
- [Skiboot] [PATCH 0/5] MBOX protocol version 2
Cyril Bur
- [Skiboot] [PATCH 1/5] libflash/mbox-flash: Minor fixups before V2
Cyril Bur
- [Skiboot] [PATCH 2/5] hw/lpc-mbox: Use message registers for interrupts
Cyril Bur
- [Skiboot] [PATCH 3/5] libflash/mbox-flash: Update to V2 of the protocol
Cyril Bur
- [Skiboot] [PATCH 4/5] libflash/mbox-flash: Implement MARK_WRITE_ERASED mbox call
Cyril Bur
- [Skiboot] [PATCH 5/5] libflash/test: Add tests for mbox-flash
Cyril Bur
- [Skiboot] [PATCH v8 07/10] skiboot: Add opal call to enable/disable Nest IMC
Michael Ellerman
- [Skiboot] [PATCH v8 07/10] skiboot: Add opal call to enable/disable Nest IMC
Madhavan Srinivasan
- [Skiboot] [PATCH 1/3] prd: Fix PRD scoms for P9
Ananth N Mavinakayanahalli
- [Skiboot] [PATCH v2] nx: Add POWER9 DARN support
Michael Neuling
- [Skiboot] [PATCH v9 00/11] skiboot: OPAL support for IMC instrumentation
Anju T Sudhakar
- [Skiboot] [PATCH v9 01/11] skiboot/doc: Add doc/imc.rst to detailthe infrastructure and interface
Anju T Sudhakar
- [Skiboot] [PATCH v9 02/11] skiboot/doc: Add devicetree binding document for IMC
Anju T Sudhakar
- [Skiboot] [PATCH v9 03/11] dt: Add helper function for last_phandle updates
Anju T Sudhakar
- [Skiboot] [PATCH v9 04/11] skiboot/libc: Add hash primitives
Anju T Sudhakar
- [Skiboot] [PATCH v9 05/11] dt: Add phandle fixup helpers
Anju T Sudhakar
- [Skiboot] [PATCH v9 06/11] skiboot: Nest IMC macro definitions
Anju T Sudhakar
- [Skiboot] [PATCH v9 07/11] skiboot: Add a library for xz
Anju T Sudhakar
- [Skiboot] [PATCH v9 08/11] skiboot: Find the IMC DTB
Anju T Sudhakar
- [Skiboot] [PATCH v9 09/11] skiboot: Add opal call to enable/disable Nest IMC
Anju T Sudhakar
- [Skiboot] [PATCH v9 10/11] skiboot: Add core IMC related counter configuration OPAL call
Anju T Sudhakar
- [Skiboot] [PATCH v9 11/11] skiboot: Add documentation for IMC opal call
Anju T Sudhakar
- [Skiboot] [PATCH skiboot v3] npu: Implement FLR
Stewart Smith
- [Skiboot] [PATCH] console: Set log level from nvram
Stewart Smith
- [Skiboot] [PATCH v2] nx: Add POWER9 DARN support
Stewart Smith
- [Skiboot] [PATCH 2/5] i2c: Improve logging
Oliver O'Halloran
- [Skiboot] [PATCH 1/5] hdata/i2c: Fix bus and clock frequencies
Oliver O'Halloran
- [Skiboot] [PATCH 3/5] i2c: Log the engine clock frequency at boot
Oliver O'Halloran
- [Skiboot] [PATCH 5/5] i2c: Add interrupts support on P9
Oliver O'Halloran
- [Skiboot] [PATCH 4/5] i2c: Remove old hack for bad clock frequency
Oliver O'Halloran
- [Skiboot] [PATCH] xive+phb4: Fix exposing trigger page to Linux
Benjamin Herrenschmidt
- [Skiboot] [PATCH V2 0/5] capi: Add support for Coherent Accelerator Interface Architecture 2.0
Frederic Barrat
- [Skiboot] op-test-framework v0.6 released
Stewart Smith
- [Skiboot] [PATCH] hdat/spira.c: Add device-tree bindings for nest mmu
Alistair Popple
- [Skiboot] [PATCH] hdat/spira.c: Add device-tree bindings for nest mmu
Oliver O'Halloran
- [Skiboot] [PATCH 1/3] prd: Fix PRD scoms for P9
Stewart Smith
- [Skiboot] [PATCH 1/5] hdata/i2c: Fix bus and clock frequencies
Stewart Smith
- [Skiboot] [PATCH] xive+phb4: Fix exposing trigger page to Linux
Stewart Smith
- [Skiboot] [PATCH v2] hdata/spira.c: Add device-tree bindings for nest mmu
Alistair Popple
Last message date:
Fri Apr 28 18:01:15 AEST 2017
Archived on: Fri Apr 28 18:01:58 AEST 2017
This archive was generated by
Pipermail 0.09 (Mailman edition).