October 2011 Archives by subject
Starting: Sat Oct 1 05:27:57 EST 2011
Ending: Mon Oct 31 22:45:56 EST 2011
Messages: 468
- [GIT PATCH] OMAP: Add initial support for DT on OMAP3 & OMAP4
Cousson, Benoit
- [GIT PATCH] OMAP: Add initial support for DT on OMAP3 & OMAP4
Tony Lindgren
- [GIT PULL] devicetree changes for v3.1
Grant Likely
- [issue] Appended device trees does not work for ST-E
Linus Walleij
- [issue] Appended device trees does not work for ST-E
Pawel Moll
- [issue] Appended device trees does not work for ST-E
Mounir Bsaibes
- [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards
Thomas Abraham
- [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards
Kukjin Kim
- [PATCH 0/2] arm: samsung: add device tree support for gic and interrupt combiner
Thomas Abraham
- [PATCH 0/3] ARM: Samsung: Add device tree support for GIC and Interrupt Combiner
Thomas Abraham
- [PATCH 0/3] Device tree support for TWL regulators
Rajendra Nayak
- [PATCH 0/3] GIC OF bindings
Rob Herring
- [PATCH 0/3] GIC OF bindings
Rob Herring
- [PATCH 0/3] GIC OF bindings
Thomas Abraham
- [PATCH 0/3] mmc: sdhci-s3c: Add device tree support for Samsung's sdhci controller driver
Thomas Abraham
- [PATCH 0/3] netdev/phy/of: Improve 10G Ethernet PHY support.
David Daney
- [PATCH 01/13] hwspinlock: OMAP4: Add spinlock support in DT
Ohad Ben-Cohen
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Thomas Abraham
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Grant Likely
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Kukjin Kim
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Rob Herring
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Russell King - ARM Linux
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Rob Herring
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Grant Likely
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Changhwan Youn
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Kukjin Kim
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Grant Likely
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Kukjin Kim
- [PATCH 1/3] irq: support domains with non-zero hwirq base
Rob Herring
- [PATCH 1/3] irq: support domains with non-zero hwirq base
Grant Likely
- [PATCH 1/3] mfd: allow mfd_cell association with device tree node
Daniel Drake
- [PATCH 1/3] mfd: allow mfd_cell association with device tree node
Mark Brown
- [PATCH 1/3] mfd: allow mfd_cell association with device tree node
Daniel Drake
- [PATCH 1/3] mfd: allow mfd_cell association with device tree node
Mark Brown
- [PATCH 1/3] mfd: allow mfd_cell association with device tree node
Daniel Drake
- [PATCH 1/3] mfd: allow mfd_cell association with device tree node
Mark Brown
- [PATCH 1/3] mfd: allow mfd_cell association with device tree node
Daniel Drake
- [PATCH 1/3] mmc: sdhci-s3c: Keep a copy of platform data and use it
Thomas Abraham
- [PATCH 1/3] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
David Daney
- [PATCH 1/3] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
Grant Likely
- [PATCH 1/3] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
Ben Hutchings
- [PATCH 1/3] regulator: twl: adapt twl-regulator driver to dt
Rajendra Nayak
- [PATCH 1/3] regulator: twl: adapt twl-regulator driver to dt
Mark Brown
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Vinod Koul
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
Thomas Abraham
- [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
Grant Likely
- [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
Kukjin Kim
- [PATCH 2/2] arm: exynos4: add support for dt irq specifier to linux virq conversion
Thomas Abraham
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Thomas Abraham
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Rob Herring
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Thomas Abraham
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Thomas Abraham
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Grant Likely
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Nicolas Pitre
- [PATCH 2/3] ARM: gic: add irq_domain support
Rob Herring
- [PATCH 2/3] ARM: gic: add irq_domain support
Grant Likely
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Rob Herring
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Stephen Warren
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Stephen Warren
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH 2/3] netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register()
David Daney
- [PATCH 2/3] netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register()
Grant Likely
- [PATCH 2/3] omap4: sdp: Pass regulator data from dt
Rajendra Nayak
- [PATCH 2/3] omap4: sdp: Pass regulator data from dt
Mark Brown
- [PATCH 2/4] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Arnd Bergmann
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Nayak, Rajendra
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Russell King - ARM Linux
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Rob Herring
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH 3/3] ARM: Exynos4: Add support for dt irq specifier to linux virq conversion
Thomas Abraham
- [PATCH 3/3] ARM: Exynos4: Add support for dt irq specifier to linux virq conversion
Grant Likely
- [PATCH 3/3] ARM: gic: add OF based initialization
Rob Herring
- [PATCH 3/3] ARM: gic: add OF based initialization
Grant Likely
- [PATCH 3/3] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH 3/3] netdev/phy: Add driver for Broadcom BCM8706 10G Ethernet PHY
David Daney
- [PATCH 3/3] netdev/phy: Add driver for Broadcom BCM8706 10G Ethernet PHY
Grant Likely
- [PATCH 3/3] netdev/phy: Add driver for Broadcom BCM8706 10G Ethernet PHY
David Daney
- [PATCH 3/3] omap4: panda: Pass regulator data from DT
Rajendra Nayak
- [PATCH 3/4] ARM: at91/dma: remove platform data from DMA controller
Nicolas Ferre
- [PATCH 3/4] ARM: at91/dma: remove platform data from DMA controller
Vinod Koul
- [PATCH 4/4] ARM: at91/dma: DMA controller registering with DT support
Nicolas Ferre
- [PATCH 8/9] regulator: helper to extract regulator node based on supply name
Grant Likely
- [PATCH] [v3] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
Kumar Gala
- [PATCH] ahci: add DT binding for Calxeda AHCI controller
Rob Herring
- [PATCH] ahci: add DT binding for Calxeda AHCI controller
Grant Likely
- [PATCH] ahci: add DT binding for Calxeda AHCI controller
Rob Herring
- [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices
Stephen Warren
- [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices
Stephen Warren
- [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices
Olof Johansson
- [PATCH] devicetree: Document Google and PA Semi prefixes
Olof Johansson
- [PATCH] devicetree: Document Wolfson prefix
Mark Brown
- [PATCH] devicetree: fix build error on drivers/tty/serial/altera_jtaguart.c
Grant Likely
- [PATCH] dt: add empty of_alias_get_id() for non-dt builds
Nicolas Ferre
- [PATCH] dt: add empty of_alias_get_id() for non-dt builds
Rob Herring
- [PATCH] dt: add empty of_alias_get_id() for non-dt builds
Grant Likely
- [PATCH] dt: Add empty of_match_node() macro
Nicolas Ferre
- [PATCH] dt: Add empty of_match_node() macro
Grant Likely
- [PATCH] dt: Add empty of_match_node() macro
Grant Likely
- [PATCH] fdtdump: rename from ftdump
Mike Frysinger
- [PATCH] fdtdump: rename from ftdump
David Gibson
- [PATCH] fdtdump: rename from ftdump
Jon Loeliger
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Rob Herring
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Rob Herring
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Kukjin Kim
- [PATCH] gpio: exynos4: Add device tree support
Rob Herring
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Grant Likely
- [PATCH] gpio: exynos4: Add device tree support
Grant Likely
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH] net: add calxeda xgmac ethernet driver
Rob Herring
- [PATCH] of/flattree: Early "find node by alias" function
Pawel Moll
- [PATCH] of/flattree: Early "find node by alias" function
David Daney
- [PATCH] of/flattree: Early "find node by alias" function
Pawel Moll
- [PATCH] of/flattree: Early "find node by alias" function
Grant Likely
- [PATCH] of/flattree: Early "find node by alias" function
Dave Martin
- [PATCH] of: Add a reg-names property to name reg entries
Benoit Cousson
- [PATCH] of: Add a reg-names property to name reg entries
Grant Likely
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH] of: Add a reg-names property to name reg entries
Grant Likely
- [PATCH] of: Add a reg-names property to name reg entries
Tony Lindgren
- [PATCH] of: Add a reg-names property to name reg entries
Segher Boessenkool
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH] of: Add a reg-names property to name reg entries
Segher Boessenkool
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH] of: Add a reg-names property to name reg entries
Segher Boessenkool
- [PATCH] of: Add a reg-names property to name reg entries
Tony Lindgren
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH] of: include errno.h
Kalle Valo
- [PATCH] of: include errno.h
Geert Uytterhoeven
- [PATCH] of: include errno.h
Grant Likely
- [PATCH] rtc: rtc-s3c: Add device tree support
Thomas Abraham
- [PATCH] rtc: rtc-s3c: Add device tree support
Kukjin Kim
- [PATCH] rtc: rtc-s3c: Add device tree support
Grant Likely
- [PATCH] rtc: rtc-s3c: Add device tree support
Kukjin Kim
- [PATCH] tty/serial: atmel_serial: fix compilation
Nicolas Ferre
- [PATCH] tty/serial: atmel_serial: fix compilation
Greg KH
- [PATCH] tty/serial: atmel_serial: fix compilation
Grant Likely
- [PATCH v2 0/3] netdev/of/phy: MDIO bus multiplexer support.
Kumar Gala
- [PATCH v2 0/3] netdev/of/phy: MDIO bus multiplexer support.
David Daney
- [PATCH v2 0/4] arm/tegra: Convert GPIO and pinmux to platform devs
Stephen Warren
- [PATCH v2 0/5] Device tree support for regulators
Rajendra Nayak
- [PATCH v2 0/5] tty/serial: atmel_serial: Device Tree support
Nicolas Ferre
- [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support
Thomas Abraham
- [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support
Kukjin Kim
- [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support
Greg KH
- [PATCH v2 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Stephen Warren
- [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver
Rajendra Nayak
- [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver
Mark Brown
- [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver
Rajendra Nayak
- [PATCH v2 1/5] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [PATCH v2 1/5] tty/serial: RS485 bindings for device tree
Grant Likely
- [PATCH v2 1/9] serial: samsung: Keep a copy of the location of platform data in driver's private data
Thomas Abraham
- [PATCH v2 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi
Stephen Warren
- [PATCH v2 2/5] dt: add empty dt helpers for non-dt build
Rajendra Nayak
- [PATCH v2 2/5] dt: add empty dt helpers for non-dt build
Grant Likely
- [PATCH v2 2/5] tty/serial: atmel_serial: change platform_data variable name
Nicolas Ferre
- [PATCH v2 2/5] tty/serial: atmel_serial: change platform_data variable name
Grant Likely
- [PATCH v2 2/9] serial: samsung: move handling of fclk/n clock to platform code
Thomas Abraham
- [PATCH v2 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH v2 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH v2 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] tty/serial: atmel_serial: whitespace and braces modifications
Nicolas Ferre
- [PATCH v2 3/5] tty/serial: atmel_serial: whitespace and braces modifications
Grant Likely
- [PATCH v2 3/9] serial: samsung: switch to clkdev based clock lookup
Thomas Abraham
- [PATCH v2 4/4] arm/tegra: Convert pinmux driver to a platform device
Stephen Warren
- [PATCH V2 4/4] ARM: at91/dma: DMA controller registering with DT support
Nicolas Ferre
- [PATCH V2 4/4] ARM: at91/dma: DMA controller registering with DT support
Sergei Shtylyov
- [PATCH v2 4/5] ARM: SPMP8000: Add SPMP8000 SoC and Letcool board dts descriptions
Zoltan Devai
- [PATCH v2 4/5] ARM: SPMP8000: Add SPMP8000 SoC and Letcool board dts descriptions
Rob Herring
- [PATCH v2 4/5] regulator: adapt fixed regulator driver to dt
Rajendra Nayak
- [PATCH v2 4/5] regulator: adapt fixed regulator driver to dt
Grant Likely
- [PATCH v2 4/5] tty/serial: atmel_serial: auto-enumerate ports
Nicolas Ferre
- [PATCH v2 4/5] tty/serial: atmel_serial: auto-enumerate ports
Grant Likely
- [PATCH v2 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it
Thomas Abraham
- [PATCH v2 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it
Grant Likely
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Rajendra Nayak
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Mark Brown
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Rajendra Nayak
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Nayak, Rajendra
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Mark Brown
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Grant Likely
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Shawn Guo
- [PATCH v2 5/5] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [PATCH v2 5/5] tty/serial: atmel_serial: add device tree support
Grant Likely
- [PATCH v2 5/9] serial: samsung: remove all uses of get_clksrc and set_clksrc
Thomas Abraham
- [PATCH v2 6/9] arm: samsung: register uart clocks to clock lookup list
Thomas Abraham
- [PATCH v2 7/9] serial: samsung: merge all SoC specific port reset functions
Thomas Abraham
- [PATCH v2 8/9] serial: samsung: merge probe() function from all SoC specific extensions
Thomas Abraham
- [PATCH v2 9/9] serial: samsung: add device tree support
Thomas Abraham
- [PATCH v2 9/9] serial: samsung: add device tree support
Grant Likely
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Russell King - ARM Linux
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Grant Likely
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH v2] net: add calxeda xgmac ethernet driver
Rob Herring
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Paul Walmsley
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Grant Likely
- [PATCH V3 (bugfix to fold)] ARM: at91: usb_a9g20.dts: fix memory location
Nicolas Ferre
- [PATCH v3 0/4] Device tree support for regulators
Rajendra Nayak
- [PATCH v3 0/4] Device tree support for regulators
Mark Brown
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Vinod Koul
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Vinod Koul
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCHv3 0/4] Initial support for Picochip picoXcell
Arnd Bergmann
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Baruch Siach
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH v3 1/3] dt: add empty of_machine_is_compatible
Stephen Warren
- [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Grant Likely
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Nayak, Rajendra
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH V3 2/2] ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
Nicolas Ferre
- [PATCH V3 2/2] ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
Rob Herring
- [PATCH v3 2/3] arm/tegra: Don't create duplicate gpio and pinmux devices
Stephen Warren
- [PATCH v3 2/3] arm/tegra: Don't create duplicate gpio and pinmux devices
Olof Johansson
- [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support
Grant Likely
- [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt
Rajendra Nayak
- [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt
Mark Brown
- [PATCH v3 3/3] arm/tegra: Add device-tree support for TrimSlice board
Stephen Warren
- [PATCH v3 3/4] ARM: at91/dma: remove platform data from DMA controller
Nicolas Ferre
- [PATCH v3 3/4] ARM: at91/dma: remove platform data from DMA controller
Grant Likely
- [PATCH v3 3/4] regulator: pass additional of_node to regulator_register()
Rajendra Nayak
- [PATCH v3 3/4] regulator: pass additional of_node to regulator_register()
Mark Brown
- [PATCH v3 4/4] ARM: at91/dma: DMA controller registering with DT support
Nicolas Ferre
- [PATCH v3 4/4] ARM: at91/dma: DMA controller registering with DT support
Grant Likely
- [PATCH v3 4/4] regulator: map consumer regulator based on device tree
Rajendra Nayak
- [PATCH v3 4/4] regulator: map consumer regulator based on device tree
Mark Brown
- [PATCHv3] dt: add helper to read 64-bit integers
Jamie Iles
- [PATCHv3] dt: add helper to read 64-bit integers
Grant Likely
- [PATCH v3] i2c-designware: add OF binding support
Rob Herring
- [PATCH v3] i2c-designware: add OF binding support
Dirk Brandewie
- [PATCH v4 0/3] Variable sized array element support
Anton Staaf
- [PATCH v4 0/3] Variable sized array element support
Jon Loeliger
- [PATCH v4 0/3] Variable sized array element support
Anton Staaf
- [PATCH v4 07/24] C6X: devicetree support
Mark Salter
- [PATCH v4 07/24] C6X: devicetree support
Arnd Bergmann
- [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table
Grant Likely
- [PATCH v4 1/3] libfdt: Add fdt16_to_cpu utility function
David Gibson
- [PATCH v4 1/3] libfdt: Add fdt16_to_cpu utility function
Anton Staaf
- [PATCH v4 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Stephen Warren
- [PATCH v4 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Olof Johansson
- [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v4 2/2] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [PATCH v4 2/3] dtc: Add data_append_integer function
David Gibson
- [PATCH v4 2/3] dtc: Add data_append_integer function
Anton Staaf
- [PATCH v4 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi
Stephen Warren
- [PATCH v4 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi
Olof Johansson
- [PATCH v4 3/3] dtc: Add support for variable sized elements
David Gibson
- [PATCH v4 3/3] dtc: Add support for variable sized elements
Anton Staaf
- [PATCH v4 3/3] dtc: Add support for variable sized elements
Jon Loeliger
- [PATCH v4 3/3] dtc: Add support for variable sized elements
Anton Staaf
- [PATCH v4 3/3] dtc: Add support for variable sized elements
Anton Staaf
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Grant Likely
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Grant Likely
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH v4 4/4] arm/tegra: Convert pinmux driver to a platform device
Stephen Warren
- [PATCH v4 4/4] arm/tegra: Convert pinmux driver to a platform device
Olof Johansson
- [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver
Thomas Abraham
- [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver
Kukjin Kim
- [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver
Kukjin Kim
- [PATCH v5 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option
Thomas Abraham
- [PATCH v5 2/2] input: samsung-keypad: Add device tree support
Thomas Abraham
- [PATCH v5] power: bq20z75: devicetree init support
Rhyland Klein
- [PATCH v6 00/10] Add device tree support for PL330 dma controller driver
Thomas Abraham
- [PATCHv6] mtd: gpio-nand: add device tree bindings
Jamie Iles
- [PATCHv6] mtd: gpio-nand: add device tree bindings
Artem Bityutskiy
- [PATCHv6] mtd: gpio-nand: add device tree bindings
Jamie Iles
- [PATCHv6] mtd: gpio-nand: add device tree bindings
Artem Bityutskiy
- [PATCHv6] mtd: gpio-nand: add device tree bindings
Jamie Iles
- [PATCHv6] mtd: gpio-nand: add device tree bindings
Grant Likely
- [PATCHv6] mtd: gpio-nand: add device tree bindings
Jamie Iles
- [PATCH v7 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v7 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Thomas Abraham
- [PULL] Devicetree for 3.2
Rob Herring
- [PULL] Devicetree for 3.2
Grant Likely
- [RFC][PATCH 1/2] powerpc/85xx: create dts components to build up an SoC
Kumar Gala
- [RFC][PATCH 1/2] powerpc/85xx: create dts components to build up an SoC
Tabi Timur-B04825
- [RFC][PATCH 1/2] powerpc/85xx: create dts components to build up an SoC
Kumar Gala
- [RFC][PATCH 1/2] powerpc/85xx: create dts components to build up an SoC
Timur Tabi
- [RFC][PATCH 1/2] powerpc/85xx: create dts components to build up an SoC
Kumar Gala
- [RFC][PATCH 2/2] powerpc/85xx: Introduce a P1020 SoC device tree
Kumar Gala
- [RFC][PATCH 2/2] powerpc/85xx: Introduce a P1020 SoC device tree
Tabi Timur-B04825
- [RFC][PATCH 2/2] powerpc/85xx: Introduce a P1020 SoC device tree
Kumar Gala
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Anton Staaf
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Rob Herring
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Segher Boessenkool
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Rob Herring
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Segher Boessenkool
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Arnd Bergmann
- [RFC] clocktree representation in the devicetree
Rob Herring
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Rob Herring
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Rob Herring
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [RFC PATCH 02/17] of_mdio: Don't phy_scan_fixups() twice
Kyle Moffett
- [RFC PATCH 02/17] of_mdio: Don't phy_scan_fixups() twice
Grant Likely
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Rob Herring
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Rob Herring
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Grant Likely
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Grant Likely
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Arnd Bergmann
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [RFD PATCH] netdev/phy/of: Augment device tree bindings for PHYs to specify IEEE802.3-2005 Section 45 addressing.
David Daney
- [RFD PATCH] netdev/phy/of: Augment device tree bindings for PHYs to specify IEEE802.3-2005 Section 45 addressing.
Andy Fleming
- dec behavior question
Kumar Gala
- dec behavior question
David Gibson
- dec behavior question
Yoder Stuart-B08248
- dec behavior question
Kumar Gala
- dec behavior question
Kumar Gala
- dec behavior question
David Gibson
- dec behavior question
Kumar Gala
- dec behavior question
David Gibson
- libfdt queries
Varun Wadekar
- libfdt queries
David Gibson
- libfdt queries
Varun Wadekar
- libfdt queries
Varun Wadekar
- orion/kirkwood and device tree support
Jason
- orion/kirkwood and device tree support
Jason
- P4080 device tree problems with fsl dpaa ...
Robert Sciuk
- P4080 device tree problems with fsl dpaa ...
Grant Likely
- P4080 device tree problems with fsl dpaa ...
Robert Sciuk
- RFC: option to toggle dtc checks on and off
David Gibson
Last message date:
Mon Oct 31 22:45:56 EST 2011
Archived on: Sat Nov 5 03:17:59 EST 2011
This archive was generated by
Pipermail 0.09 (Mailman edition).