[PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
thomas.abraham at linaro.org
Tue Oct 11 19:16:14 EST 2011
As gpio chips get registered, a device tree node which represents the
gpio chip is searched and attached to it. A translate function is also
provided to convert the gpio specifier into actual platform settings
for pin function selection, pull up/down and driver strength settings.
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
This patch is based on the latest consolidated Samsung GPIO driver available
in the following tree:
https://github.com/kgene/linux-samsung.git branch: for-next
.../devicetree/bindings/gpio/gpio-samsung.txt | 30 +++++++++++
drivers/gpio/gpio-samsung.c | 53 ++++++++++++++++++++
2 files changed, 83 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-samsung.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
new file mode 100644
index 0000000..883faeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -0,0 +1,30 @@
+Samsung Exynos4 GPIO Controller
+
+Required properties:
+- compatible: Format of compatible property value should be
+ "samsung,exynos4-gpio-<controller_name>". Example: For GPA0 controller, the
+ compatible property value should be "samsung,exynos4-gpio-gpa0".
+
+- reg: Physical base address of the controller and length of memory mapped region.
+
+- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
+ should be the following with values derived from the SoC user manual.
+ <[phandle of the gpio controller node] <pin number within the gpio controller]
+ [mux function] [pull up/down] [drive strength]>
+
+- gpio-controller: Specifies that the node is a gpio controller.
+
+- #address-cells: should be 1.
+
+- #size-cells: should be 1.
+
+Example:
+
+ gpa0: gpio-controller at 11400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,exynos4-gpio-gpa0";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ gpio-controller;
+ };
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b6be77a..037d3bb 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -24,6 +24,10 @@
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/ioport.h>
+#ifdef CONFIG_OF
+#include <linux/of.h>
+#include <linux/slab.h>
+#endif
#include <asm/irq.h>
@@ -2353,6 +2357,52 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = {
#endif
};
+#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
+int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
+ const void *gpio_spec, u32 *flags)
+{
+ const __be32 *gpio = gpio_spec;
+ const u32 n = be32_to_cpup(gpio);
+ unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+
+ if (gc->of_gpio_n_cells < 4) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (n > gc->ngpio)
+ return -EINVAL;
+
+ s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1])));
+ s3c_gpio_setpull(pin, be32_to_cpu(gpio[2]));
+ s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3]));
+ return n;
+}
+
+static __init void exynos4_gpiolib_attach_ofnode(struct gpio_chip *gc)
+{
+ const char exynos4_gpio_compat_base[] = "samsung,exynos4-gpio-";
+ char *exynos4_gpio_compat;
+
+ exynos4_gpio_compat = kzalloc(strlen(exynos4_gpio_compat_base) +
+ strlen(gc->label), GFP_KERNEL);
+ if (!exynos4_gpio_compat)
+ return;
+
+ strcpy(exynos4_gpio_compat, exynos4_gpio_compat_base);
+ strcat(exynos4_gpio_compat, gc->label);
+ gc->of_node = of_find_compatible_node(NULL, NULL, exynos4_gpio_compat);
+ gc->of_gpio_n_cells = 4;
+ gc->of_xlate = exynos4_gpio_xlate;
+ kfree(exynos4_gpio_compat);
+}
+#else
+static __init void exynos4_gpiolib_attach_ofnode(struct gpio_chip *chip)
+{
+ return;
+}
+#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
@@ -2434,6 +2484,7 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+ exynos4_gpiolib_attach_ofnode(&chip->chip);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
@@ -2446,6 +2497,7 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+ exynos4_gpiolib_attach_ofnode(&chip->chip);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
@@ -2458,6 +2510,7 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+ exynos4_gpiolib_attach_ofnode(&chip->chip);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
--
1.6.6.rc2
More information about the devicetree-discuss
mailing list