[PATCH V2] AT91: dt: at91sam9g45 family and board device tree files

[Grant Likely]

On Tue, Oct 18, 2011 at 12:07:17PM +0200, Nicolas Ferre wrote:
> On 10/07/2011 02:56 PM, Nicolas Ferre :
> > On 10/05/2011 03:00 PM, Rob Herring :
> >> Nicolas,
> >>
> >> On 10/03/2011 05:00 AM, Nicolas Ferre wrote:
> >>> Create a new device tree source file for Atmel at91sam9g45 SoC family.
> >>> The Evaluation Kit at91sam9m10g45ek includes it.
> >>> This first basic support will be populated as drivers and boards will be
> >>> converted to device tree.
> >>> Contains serial, dma and interrupt controllers.
> >>>
> >>> The generic board file still takes advantage of platform data for early serial
> >>> init. As we need a storage media and the NAND flash driver is not converted to
> >>> DT yet, we keep old initialization for it.
> >>>
> >>> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> 
> [..]
> 
> >>> diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
> >>> new file mode 100644
> >>> index 0000000..7bcb9a9
> >>> --- /dev/null
> >>> +++ b/arch/arm/mach-at91/board-dt.c
> >>> @@ -0,0 +1,122 @@
> >>> +/*
> >>> + *  Setup code for AT91SAM Evaluation Kits with Device Tree support
> >>> + *
> >>> + *  Covers: * AT91SAM9G45-EKES  board
> >>> + *          * AT91SAM9M10-EKES  board
> >>> + *          * AT91SAM9M10G45-EK board
> >>> + *
> >>> + *  Copyright (C) 2011 Atmel,
> >>> + *                2011 Nicolas Ferre <nicolas.ferre at atmel.com>
> >>> + *
> >>> + * Licensed under GPLv2 or later.
> >>> + */
> >>> +
> >>> +#include <linux/types.h>
> >>> +#include <linux/init.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/irqdomain.h>
> >>> +#include <linux/of_irq.h>
> >>> +#include <linux/of_platform.h>
> >>> +
> >>> +#include <mach/hardware.h>
> >>> +#include <mach/board.h>
> >>> +#include <mach/gpio.h>
> >>> +#include <mach/system_rev.h>
> >>> +#include <mach/at91sam9_smc.h>
> >>> +
> >>> +#include <asm/setup.h>
> >>> +#include <asm/irq.h>
> >>> +#include <asm/mach/arch.h>
> >>> +#include <asm/mach/map.h>
> >>> +#include <asm/mach/irq.h>
> >>> +
> >>> +#include "sam9_smc.h"
> >>> +#include "generic.h"
> 
> As found by Jean-Christophe, it seems that some clock lookup data are missing here. Something like:
> 
> +/*
> + * Lookup table for attaching a specific name and platform_data pointer to
> + * devices as they get created by of_platform_populate(). Ideally this table
> + * would not exist, but the current clock implementation depends on some devices
> + * having a specific name.
> + /
> +static const struct of_dev_auxdata at91_auxdata_lookup[] __initconst = {
> + / at91sam9260/ at91sam9g20 /
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffff200, "atmel_usart.0", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffb0000, "atmel_usart.1", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffb4000, "atmel_usart.2", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffb8000, "atmel_usart.3", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffd0000, "atmel_usart.4", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffd4000, "atmel_usart.5", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffd8000, "atmel_usart.6", NULL),
> + / at91sam9g45*/
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xffffee00, "atmel_usart.0", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff8c000, "atmel_usart.1", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff90000, "atmel_usart.2", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff94000, "atmel_usart.3", NULL),
> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff98000, "atmel_usart.4", NULL),
> + { /* sentinel */ }
> +};
> 
> With a change here:
>   of_platform_populate(NULL, of_default_bus_match_table, at91_auxdata_lookup, NULL);
> 
> I know that it is a temporary usage of auxdata. Does it sound the right thing to do for the moment?

yes.

g.