[PATCH V2] AT91: dt: at91sam9g45 family and board device tree files

[Rob Herring]

On 10/19/2011 03:03 AM, Nicolas Ferre wrote:
> On 10/18/2011 10:44 PM, Rob Herring :
>> Nicolas,
>>
>> On 10/18/2011 05:07 AM, Nicolas Ferre wrote:
>>> On 10/07/2011 02:56 PM, Nicolas Ferre :
>>>> On 10/05/2011 03:00 PM, Rob Herring :
>>>>> Nicolas,
>>>>>
>>>>> On 10/03/2011 05:00 AM, Nicolas Ferre wrote:
>>>>>> Create a new device tree source file for Atmel at91sam9g45 SoC family.
>>>>>> The Evaluation Kit at91sam9m10g45ek includes it.
>>>>>> This first basic support will be populated as drivers and boards will be
>>>>>> converted to device tree.
>>>>>> Contains serial, dma and interrupt controllers.
>>>>>>
>>>>>> The generic board file still takes advantage of platform data for early serial
>>>>>> init. As we need a storage media and the NAND flash driver is not converted to
>>>>>> DT yet, we keep old initialization for it.
>>>>>>
>>>>>> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
>>>
>>> [..]
>>>
>>>>>> diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
>>>>>> new file mode 100644
>>>>>> index 0000000..7bcb9a9
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm/mach-at91/board-dt.c
>>>>>> @@ -0,0 +1,122 @@
>>>>>> +/*
>>>>>> + *  Setup code for AT91SAM Evaluation Kits with Device Tree support
>>>>>> + *
>>>>>> + *  Covers: * AT91SAM9G45-EKES  board
>>>>>> + *          * AT91SAM9M10-EKES  board
>>>>>> + *          * AT91SAM9M10G45-EK board
>>>>>> + *
>>>>>> + *  Copyright (C) 2011 Atmel,
>>>>>> + *                2011 Nicolas Ferre <nicolas.ferre at atmel.com>
>>>>>> + *
>>>>>> + * Licensed under GPLv2 or later.
>>>>>> + */
>>>>>> +
>>>>>> +#include <linux/types.h>
>>>>>> +#include <linux/init.h>
>>>>>> +#include <linux/module.h>
>>>>>> +#include <linux/irqdomain.h>
>>>>>> +#include <linux/of_irq.h>
>>>>>> +#include <linux/of_platform.h>
>>>>>> +
>>>>>> +#include <mach/hardware.h>
>>>>>> +#include <mach/board.h>
>>>>>> +#include <mach/gpio.h>
>>>>>> +#include <mach/system_rev.h>
>>>>>> +#include <mach/at91sam9_smc.h>
>>>>>> +
>>>>>> +#include <asm/setup.h>
>>>>>> +#include <asm/irq.h>
>>>>>> +#include <asm/mach/arch.h>
>>>>>> +#include <asm/mach/map.h>
>>>>>> +#include <asm/mach/irq.h>
>>>>>> +
>>>>>> +#include "sam9_smc.h"
>>>>>> +#include "generic.h"
>>>
>>> As found by Jean-Christophe, it seems that some clock lookup data are missing here. Something like:
>>>
>>> +/*
>>> + * Lookup table for attaching a specific name and platform_data pointer to
>>> + * devices as they get created by of_platform_populate(). Ideally this table
>>> + * would not exist, but the current clock implementation depends on some devices
>>> + * having a specific name.
>>> + /
>>> +static const struct of_dev_auxdata at91_auxdata_lookup[] __initconst = {
>>> + / at91sam9260/ at91sam9g20 /
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffff200, "atmel_usart.0", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffb0000, "atmel_usart.1", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffb4000, "atmel_usart.2", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffb8000, "atmel_usart.3", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffd0000, "atmel_usart.4", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffd4000, "atmel_usart.5", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfffd8000, "atmel_usart.6", NULL),
>>> + / at91sam9g45*/
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xffffee00, "atmel_usart.0", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff8c000, "atmel_usart.1", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff90000, "atmel_usart.2", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff94000, "atmel_usart.3", NULL),
>>> + OF_DEV_AUXDATA("atmel,at91sam9260-usart", 0xfff98000, "atmel_usart.4", NULL),
>>> + { /* sentinel */ }
>>> +};
>>>
>>> With a change here:
>>>   of_platform_populate(NULL, of_default_bus_match_table, at91_auxdata_lookup, NULL);
>>>
>>> I know that it is a temporary usage of auxdata. Does it sound the right thing to do for the moment?
>>>
>>
>> If clk lookups are the only thing needed, can't you jusst add the
>> lookups for DT?
> 
> You mean this code surrounded by #ifdef CONFIG_OF?
> 
> This board file is dedicated to device tree support and selects
> CONFIG_USE_OF in Kconfig... So I thought it was not necessary to add it.
> 

No, I mean you already have a clkdev lookup table with atmel_usart.0 for
example. Can't you just add to that table a clkdev lookup entry for
atmel_usart.ffffee000. You can ifdef it if you're concerned about size,
but it doesn't have to be. There shouldn't be any issue having 2 entries
for 2 different device names.

Rob