[PATCH v4 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Stephen Warren
swarren at nvidia.com
Wed Oct 12 09:16:12 EST 2011
The Tegra GPIO driver will be converted from static registration via
postcore_initcall() to be a platform device later in this patch series.
A new Tegra pinmux platform device will also be added.
Prepare for this by modifying all boards to register the appropriate
platform devices before-hand, so that when the drivers are converted,
those devices will be probed, and git bisectability will be maintained.
v2: Add resource definitions for GPIO and pinmux
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/mach-tegra/board-harmony-pinmux.c | 8 +++
arch/arm/mach-tegra/board-paz00-pinmux.c | 8 +++
arch/arm/mach-tegra/board-seaboard-pinmux.c | 9 ++-
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 ++
arch/arm/mach-tegra/devices.c | 84 ++++++++++++++++++++++++++
arch/arm/mach-tegra/devices.h | 2 +
6 files changed, 116 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 4d63e2e..e99b456 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-harmony.h"
+#include "devices.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
@@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = {
void harmony_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index 2225769..fb20894 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-paz00.h"
+#include "devices.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
@@ -152,6 +158,8 @@ static struct tegra_gpio_table gpio_table[] = {
void paz00_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 74f78b7..f092298 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-seaboard.h"
+#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
@@ -157,8 +158,10 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-
-
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
@@ -173,6 +176,8 @@ static struct tegra_gpio_table gpio_table[] = {
void __init seaboard_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index bcb1916..4969dd2 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-trimslice.h"
+#include "devices.h"
static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -141,6 +142,11 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
@@ -151,6 +157,7 @@ static struct tegra_gpio_table gpio_table[] = {
void __init trimslice_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..240d5dc 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -31,6 +31,90 @@
#include <mach/usb_phy.h>
#include "gpio-names.h"
+static struct resource gpio_resource[] = {
+ [0] = {
+ .start = TEGRA_GPIO_BASE,
+ .end = TEGRA_GPIO_BASE + TEGRA_GPIO_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_GPIO1,
+ .end = INT_GPIO1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = INT_GPIO2,
+ .end = INT_GPIO2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = INT_GPIO3,
+ .end = INT_GPIO3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [4] = {
+ .start = INT_GPIO4,
+ .end = INT_GPIO4,
+ .flags = IORESOURCE_IRQ,
+ },
+ [5] = {
+ .start = INT_GPIO5,
+ .end = INT_GPIO5,
+ .flags = IORESOURCE_IRQ,
+ },
+ [6] = {
+ .start = INT_GPIO6,
+ .end = INT_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+ [7] = {
+ .start = INT_GPIO7,
+ .end = INT_GPIO7,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device tegra_gpio_device = {
+ .name = "tegra-gpio",
+ .id = -1,
+ .resource = gpio_resource,
+ .num_resources = ARRAY_SIZE(gpio_resource),
+};
+
+static struct resource pinmux_resource[] = {
+ [0] = {
+ /* Tri-state registers */
+ .start = TEGRA_APB_MISC_BASE + 0x14,
+ .end = TEGRA_APB_MISC_BASE + 0x20 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* Mux registers */
+ .start = TEGRA_APB_MISC_BASE + 0x80,
+ .end = TEGRA_APB_MISC_BASE + 0x9c + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ /* Pull-up/down registers */
+ .start = TEGRA_APB_MISC_BASE + 0xa0,
+ .end = TEGRA_APB_MISC_BASE + 0xb0 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ /* Pad control registers */
+ .start = TEGRA_APB_MISC_BASE + 0x868,
+ .end = TEGRA_APB_MISC_BASE + 0x90c + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device tegra_pinmux_device = {
+ .name = "tegra-pinmux",
+ .id = -1,
+ .resource = pinmux_resource,
+ .num_resources = ARRAY_SIZE(pinmux_resource),
+};
+
static struct resource i2c_resource1[] = {
[0] = {
.start = INT_I2C,
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 4a7dc0a..873ecb2 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -21,6 +21,8 @@
#include <linux/platform_device.h>
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
extern struct platform_device tegra_sdhci_device1;
extern struct platform_device tegra_sdhci_device2;
extern struct platform_device tegra_sdhci_device3;
--
1.7.0.4
More information about the devicetree-discuss
mailing list