[PATCH 2/3] ARM: gic: add irq_domain support
Grant Likely
grant.likely at secretlab.ca
Wed Oct 5 10:41:23 EST 2011
On Fri, Sep 30, 2011 at 02:27:59PM -0500, Rob Herring wrote:
> From: Rob Herring <rob.herring at calxeda.com>
>
> Convert the gic interrupt controller to use irq domains in preparation
> for device-tree binding and MULTI_IRQ. This allows for translation between
> GIC interrupt IDs and Linux irq numbers.
>
> The meaning of irq_offset has changed. It now is just the number of skipped
> GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32
> for secondary GICs.
>
> Cc: Marc Zyngier <marc.zyngier at arm.com>
> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
> ---
> arch/arm/common/Kconfig | 1 +
> arch/arm/common/gic.c | 81 ++++++++++++++++++++---------------
> arch/arm/include/asm/hardware/gic.h | 4 +-
> 3 files changed, 51 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
> index 4b71766..74df9ca 100644
> --- a/arch/arm/common/Kconfig
> +++ b/arch/arm/common/Kconfig
> @@ -1,4 +1,5 @@
> config ARM_GIC
> + select IRQ_DOMAIN
> bool
>
> config ARM_VIC
> diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
> index 8b5be72..6fbe1db 100644
> --- a/arch/arm/common/gic.c
> +++ b/arch/arm/common/gic.c
> @@ -29,6 +29,7 @@
> #include <linux/cpu_pm.h>
> #include <linux/cpumask.h>
> #include <linux/io.h>
> +#include <linux/irqdomain.h>
>
> #include <asm/irq.h>
> #include <asm/mach/irq.h>
> @@ -72,8 +73,7 @@ static inline void __iomem *gic_cpu_base(struct irq_data *d)
>
> static inline unsigned int gic_irq(struct irq_data *d)
> {
> - struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
> - return d->irq - gic_data->irq_offset;
> + return d->hwirq;
> }
Nit: Personally, I'd just drop gic_irq() entirely and reference
d->hwirq directly. However, it isn't enough to withhold my a-b.
Acked-by: Grant Likely <grant.likely at secretlab.ca>
>
> /*
> @@ -81,7 +81,7 @@ static inline unsigned int gic_irq(struct irq_data *d)
> */
> static void gic_mask_irq(struct irq_data *d)
> {
> - u32 mask = 1 << (d->irq % 32);
> + u32 mask = 1 << (gic_irq(d) % 32);
>
> spin_lock(&irq_controller_lock);
> writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
> @@ -92,7 +92,7 @@ static void gic_mask_irq(struct irq_data *d)
>
> static void gic_unmask_irq(struct irq_data *d)
> {
> - u32 mask = 1 << (d->irq % 32);
> + u32 mask = 1 << (gic_irq(d) % 32);
>
> spin_lock(&irq_controller_lock);
> if (gic_arch_extn.irq_unmask)
> @@ -173,7 +173,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
> bool force)
> {
> void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
> - unsigned int shift = (d->irq % 4) * 8;
> + unsigned int shift = (gic_irq(d) % 4) * 8;
> unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
> u32 val, mask, bit;
>
> @@ -224,7 +224,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
> if (gic_irq == 1023)
> goto out;
>
> - cascade_irq = gic_irq + chip_data->irq_offset;
> + cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq);
> if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
> do_bad_IRQ(cascade_irq, desc);
> else
> @@ -256,10 +256,11 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
> irq_set_chained_handler(irq, gic_handle_cascade_irq);
> }
>
> -static void __init gic_dist_init(struct gic_chip_data *gic,
> - unsigned int irq_start)
> +static void __init gic_dist_init(struct gic_chip_data *gic)
> {
> - unsigned int gic_irqs, irq_limit, i;
> + unsigned int gic_irqs = gic->gic_irqs;
> + struct irq_domain *domain = &gic->domain;
> + unsigned int i, irq;
> u32 cpumask;
> void __iomem *base = gic->dist_base;
> u32 cpu = 0;
> @@ -275,17 +276,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
> writel_relaxed(0, base + GIC_DIST_CTRL);
>
> /*
> - * Find out how many interrupts are supported.
> - * The GIC only supports up to 1020 interrupt sources.
> - */
> - gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
> - gic_irqs = (gic_irqs + 1) * 32;
> - if (gic_irqs > 1020)
> - gic_irqs = 1020;
> -
> - gic->gic_irqs = gic_irqs;
> -
> - /*
> * Set all global interrupts to be level triggered, active low.
> */
> for (i = 32; i < gic_irqs; i += 16)
> @@ -311,19 +301,12 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
> writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
>
> /*
> - * Limit number of interrupts registered to the platform maximum
> - */
> - irq_limit = gic->irq_offset + gic_irqs;
> - if (WARN_ON(irq_limit > NR_IRQS))
> - irq_limit = NR_IRQS;
> -
> - /*
> * Setup the Linux IRQ subsystem.
> */
> - for (i = irq_start; i < irq_limit; i++) {
> - irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
> - irq_set_chip_data(i, gic);
> - set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
> + irq_domain_for_each_irq(domain, i, irq) {
> + irq_set_chip_and_handler(irq, &gic_chip, handle_fasteoi_irq);
> + irq_set_chip_data(irq, gic);
> + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
> }
>
> writel_relaxed(1, base + GIC_DIST_CTRL);
> @@ -535,23 +518,53 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
> }
> #endif
>
> +const struct irq_domain_ops gic_irq_domain_ops = {
> +};
> +
> void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
> void __iomem *dist_base, void __iomem *cpu_base)
> {
> struct gic_chip_data *gic;
> + struct irq_domain *domain;
> + int gic_irqs;
>
> BUG_ON(gic_nr >= MAX_GIC_NR);
>
> gic = &gic_data[gic_nr];
> + domain = &gic->domain;
> gic->dist_base = dist_base;
> gic->cpu_base = cpu_base;
> - gic->irq_offset = (irq_start - 1) & ~31;
>
> - if (gic_nr == 0)
> + /*
> + * For primary GICs, skip over SGIs.
> + * For secondary GICs, skip over PPIs, too.
> + */
> + if (gic_nr == 0) {
> gic_cpu_base_addr = cpu_base;
> + domain->hwirq_base = 16;
> + irq_start = (irq_start & ~31) + 16;
> + } else
> + domain->hwirq_base = 32;
> +
> + /*
> + * Find out how many interrupts are supported.
> + * The GIC only supports up to 1020 interrupt sources.
> + */
> + gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
> + gic_irqs = (gic_irqs + 1) * 32;
> + if (gic_irqs > 1020)
> + gic_irqs = 1020;
> + gic->gic_irqs = gic_irqs;
> +
> + domain->nr_irq = gic_irqs - domain->hwirq_base;
> + domain->irq_base = irq_alloc_descs(-1, irq_start, domain->nr_irq,
> + numa_node_id());
> + domain->priv = gic;
> + domain->ops = &gic_irq_domain_ops;
> + irq_domain_add(domain);
>
> gic_chip.flags |= gic_arch_extn.flags;
> - gic_dist_init(gic, irq_start);
> + gic_dist_init(gic);
> gic_cpu_init(gic);
> gic_pm_init(gic);
> }
> diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
> index c562705..ade84a4 100644
> --- a/arch/arm/include/asm/hardware/gic.h
> +++ b/arch/arm/include/asm/hardware/gic.h
> @@ -33,6 +33,8 @@
> #define GIC_DIST_SOFTINT 0xf00
>
> #ifndef __ASSEMBLY__
> +#include <linux/irqdomain.h>
> +
> extern void __iomem *gic_cpu_base_addr;
> extern struct irq_chip gic_arch_extn;
>
> @@ -43,7 +45,6 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
> void gic_enable_ppi(unsigned int);
>
> struct gic_chip_data {
> - unsigned int irq_offset;
> void __iomem *dist_base;
> void __iomem *cpu_base;
> #ifdef CONFIG_CPU_PM
> @@ -53,6 +54,7 @@ struct gic_chip_data {
> u32 __percpu *saved_ppi_enable;
> u32 __percpu *saved_ppi_conf;
> #endif
> + struct irq_domain domain;
> unsigned int gic_irqs;
> };
> #endif
> --
> 1.7.5.4
>
More information about the devicetree-discuss
mailing list