[PATCH v2 3/5] regulator: helper routine to extract regulator_init_data

Shawn Guo shawn.guo at freescale.com
Mon Oct 17 01:55:37 EST 2011


On Mon, Oct 10, 2011 at 09:49:36PM +0530, Rajendra Nayak wrote:
> The helper routine is meant to be used by regulator drivers
> to extract the regulator_init_data structure from the data
> that is passed from device tree.
> 'consumer_supplies' which is part of regulator_init_data is not extracted
> as the regulator consumer mappings are passed through DT differently,
> implemented in subsequent patches.
> Similarly the regulator<-->parent/supply mapping is handled in
> subsequent patches.
> 
> Also add documentation for regulator bindings to be used to pass
> regulator_init_data struct information from device tree.
> 
> Signed-off-by: Rajendra Nayak <rnayak at ti.com>
> ---
>  .../devicetree/bindings/regulator/regulator.txt    |   44 +++++++++
>  drivers/regulator/Kconfig                          |    8 ++
>  drivers/regulator/Makefile                         |    1 +
>  drivers/regulator/of_regulator.c                   |   93 ++++++++++++++++++++
>  include/linux/regulator/of_regulator.h             |   21 +++++
>  5 files changed, 167 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/regulator/regulator.txt
>  create mode 100644 drivers/regulator/of_regulator.c
>  create mode 100644 include/linux/regulator/of_regulator.h
> 
> diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
> new file mode 100644
> index 0000000..a623fdd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/regulator.txt
> @@ -0,0 +1,44 @@
> +Voltage/Current Regulators
> +
> +Optional properties:
> +- regulator-min-uV: smallest voltage consumers may set
> +- regulator-max-uV: largest voltage consumers may set
> +- regulator-uV-offset: Offset applied to voltages to compensate for voltage drops
> +- regulator-min-uA: smallest current consumers may set
> +- regulator-max-uA: largest current consumers may set
> +- regulator-change-voltage: boolean, Output voltage can be changed by software
> +- regulator-change-current: boolean, Output current can be chnaged by software
> +- regulator-change-mode: boolean, Operating mode can be changed by software
> +- regulator-change-status: boolean, Enable/Disable control for regulator exists
> +- regulator-change-drms: boolean, Dynamic regulator mode switching is enabled
> +- regulator-mode-fast: boolean, allow/set fast mode for the regulator
> +- regulator-mode-normal: boolean, allow/set normal mode for the regulator
> +- regulator-mode-idle: boolean, allow/set idle mode for the regulator
> +- regulator-mode-standby: boolean, allow/set standby mode for the regulator
> +- regulator-input-uV: Input voltage for regulator when supplied by another regulator
> +- regulator-always-on: boolean, regulator should never be disabled
> +- regulator-boot-on: bootloader/firmware enabled regulator
> +- <name>-supply: phandle to the parent supply/regulator node
> +
> +Example:
> +
> +	xyzreg: regulator at 0 {
> +		regulator-min-uV = <1000000>;
> +		regulator-max-uV = <2500000>;
> +		regulator-mode-fast;
> +		regulator-change-voltage;
> +		regulator-always-on;
> +		vin-supply = <&vin>;
> +	};
> +
> +The same binding used by a regulator to reference its
> +supply can be used by any consumer to reference its
> +regulator/supply
> +
> +Example of a device node referencing a regulator node,
> +
> +	devicenode: node at 0x0 {
> +		...
> +		...
> +		<name>-supply = <&xyzreg>;
> +	};
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index c7fd2c0..981c92e 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -64,6 +64,14 @@ config REGULATOR_USERSPACE_CONSUMER
>  
>            If unsure, say no.
>  
> +config OF_REGULATOR
> +	tristate "OF regulator helpers"
> +	depends on OF
> +	default y if OF
> +	help
> +	  OpenFirmware regulator framework helper routines that can
> +	  used by regulator drivers to extract data from device tree.
> +
>  config REGULATOR_BQ24022
>  	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
>  	help
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 040d5aa..e6bc009 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_REGULATOR) += core.o dummy.o
>  obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
>  obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
>  obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
> +obj-$(CONFIG_OF_REGULATOR) += of_regulator.o
>  
>  obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
>  obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
> diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
> new file mode 100644
> index 0000000..9262d06
> --- /dev/null
> +++ b/drivers/regulator/of_regulator.c
> @@ -0,0 +1,93 @@
> +/*
> + * OF helpers for regulator framework
> + *
> + * Copyright (C) 2011 Texas Instruments, Inc.
> + * Rajendra Nayak <rnayak at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regulator/machine.h>
> +
> +static void of_get_regulation_constraints(struct device_node *np,
> +					struct regulator_init_data **init_data)
> +{
> +	const __be32 *min_uV, *max_uV, *uV_offset;
> +	const __be32 *min_uA, *max_uA, *input_uV;
> +	unsigned int valid_modes_mask = 0, valid_ops_mask = 0;
> +
> +	min_uV = of_get_property(np, "regulator-min-uV", NULL);
> +	if (min_uV)
> +		(*init_data)->constraints.min_uV = be32_to_cpu(*min_uV);
> +	max_uV = of_get_property(np, "regulator-max-uV", NULL);
> +	if (max_uV)
> +		(*init_data)->constraints.max_uV = be32_to_cpu(*max_uV);
> +	uV_offset = of_get_property(np, "regulator-uV-offset", NULL);
> +	if (uV_offset)
> +		(*init_data)->constraints.uV_offset = be32_to_cpu(*uV_offset);
> +	min_uA = of_get_property(np, "regulator-min-uA", NULL);
> +	if (min_uA)
> +		(*init_data)->constraints.min_uA = be32_to_cpu(*min_uA);
> +	max_uA = of_get_property(np, "regulator-max-uA", NULL);
> +	if (max_uA)
> +		(*init_data)->constraints.max_uA = be32_to_cpu(*max_uA);
> +	input_uV = of_get_property(np, "regulator-input-uV", NULL);
> +	if (input_uV)
> +		(*init_data)->constraints.input_uV = be32_to_cpu(*input_uV);
> +
> +	/* valid modes mask */
> +	if (of_find_property(np, "regulator-mode-fast", NULL))
> +				valid_modes_mask |= REGULATOR_MODE_FAST;
> +	if (of_find_property(np, "regulator-mode-normal", NULL))
> +				valid_modes_mask |= REGULATOR_MODE_NORMAL;
> +	if (of_find_property(np, "regulator-mode-idle", NULL))
> +				valid_modes_mask |= REGULATOR_MODE_IDLE;
> +	if (of_find_property(np, "regulator-mode-standby", NULL))
> +				valid_modes_mask |= REGULATOR_MODE_STANDBY;
> +
> +	/* valid ops mask */
> +	if (of_find_property(np, "regulator-change-voltage", NULL))
> +				valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
> +	if (of_find_property(np, "regulator-change-current", NULL))
> +				valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
> +	if (of_find_property(np, "regulator-change-mode", NULL))
> +				valid_ops_mask |= REGULATOR_CHANGE_MODE;
> +	if (of_find_property(np, "regulator-change-status", NULL))
> +				valid_ops_mask |= REGULATOR_CHANGE_STATUS;
> +
> +	(*init_data)->constraints.valid_modes_mask = valid_modes_mask;
> +	(*init_data)->constraints.valid_ops_mask = valid_ops_mask;
> +
> +	if (of_find_property(np, "regulator-always-on", NULL))
> +				(*init_data)->constraints.always_on = true;
> +	if (of_find_property(np, "regulator-boot-on", NULL))
> +				(*init_data)->constraints.boot_on = true;
> +}
> +
I do not see that of_get_regulation_constraints() covers the following
fields.  We do not support them for DT probe?

struct regulation_constraints {

        char *name;

	...

        /* regulator suspend states for global PMIC STANDBY/HIBERNATE */
        struct regulator_state state_disk;
        struct regulator_state state_mem;
        struct regulator_state state_standby;
        suspend_state_t initial_state; /* suspend state to set at init */

        /* mode to set on startup */
        unsigned int initial_mode;

        /* constraint flags */
	...
        unsigned apply_uV:1;    /* apply uV constraint if min == max */
};

-- 
Regards,
Shawn



More information about the devicetree-discuss mailing list