[PATCH] ahci: add DT binding for Calxeda AHCI controller
Rob Herring
robherring2 at gmail.com
Tue Oct 25 01:20:07 EST 2011
Jeff,
On 10/03/2011 09:30 PM, Rob Herring wrote:
> On 09/02/2011 10:10 AM, Rob Herring wrote:
>> From: Rob Herring <rob.herring at calxeda.com>
>>
>> Add devicetree match table to ahci platform driver for Calxeda Highbank
>> AHCI controller.
>>
>> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
>> Cc: Jeff Garzik <jgarzik at pobox.com>
>> Cc: linux-ide at vger.kernel.org
>> Cc: linux-kernel at vger.kernel.org
>> Cc: devicetree-discuss at lists.ozlabs.org
>> ---
>
> Any comments on this?
>
Ping.
Can you please apply this for 3.2.
Regards,
Rob
>> .../devicetree/bindings/ata/calxeda-sata.txt | 17 +++++++++++++++++
>> drivers/ata/ahci_platform.c | 7 +++++++
>> 2 files changed, 24 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/ata/calxeda-sata.txt
>>
>> diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
>> new file mode 100644
>> index 0000000..79caa56
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
>> @@ -0,0 +1,17 @@
>> +* Calxeda SATA Controller
>> +
>> +SATA nodes are defined to describe on-chip Serial ATA controllers.
>> +Each SATA controller should have its own node.
>> +
>> +Required properties:
>> +- compatible : compatible list, contains "calxeda,hb-ahci"
>> +- interrupts : <interrupt mapping for SATA IRQ>
>> +- reg : <registers mapping>
>> +
>> +Example:
>> + sata at ffe08000 {
>> + compatible = "calxeda,hb-ahci";
>> + reg = <0xffe08000 0x1000>;
>> + interrupts = <115>;
>> + };
>> +
>> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
>> index 6fef1fa..9bfc970 100644
>> --- a/drivers/ata/ahci_platform.c
>> +++ b/drivers/ata/ahci_platform.c
>> @@ -171,11 +171,18 @@ static int __devexit ahci_remove(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +static const struct of_device_id ahci_of_match[] = {
>> + { .compatible = "calxeda,hb-ahci", },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, ahci_of_match);
>> +
>> static struct platform_driver ahci_driver = {
>> .remove = __devexit_p(ahci_remove),
>> .driver = {
>> .name = "ahci",
>> .owner = THIS_MODULE,
>> + .of_match_table = ahci_of_match,
>> },
>> };
>>
>
More information about the devicetree-discuss
mailing list