[PATCH 3/3] ARM: Exynos4: Add support for dt irq specifier to linux virq conversion

Grant Likely grant.likely at secretlab.ca
Thu Oct 13 11:54:12 EST 2011


On Mon, Oct 10, 2011 at 01:41:29PM +0530, Thomas Abraham wrote:
> Add support for conversion of device tree interrupt specifier to linux
> virq domain for GIC and Interrupt combiner controllers.
> 
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  .../devicetree/bindings/irq/samsung-combiner.txt   |   24 ++++++++++
>  arch/arm/mach-exynos4/cpu.c                        |   20 ++++++++-
>  arch/arm/mach-exynos4/irq-combiner.c               |   45 ++++++++++++++++++++
>  3 files changed, 88 insertions(+), 1 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/irq/samsung-combiner.txt
> 
> diff --git a/Documentation/devicetree/bindings/irq/samsung-combiner.txt b/Documentation/devicetree/bindings/irq/samsung-combiner.txt
> new file mode 100644
> index 0000000..b7d5c30
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/irq/samsung-combiner.txt
> @@ -0,0 +1,24 @@
> +* Exynos4 Interrupt Combiner Controller
> +
> +Samsung's Exynos4 architecture includes a interrupt combiner which
> +can combine interrupt sources as a group and provide a single
> +interrupt request for the group. The interrupt request from each
> +group are connected to a parent interrupt controller, which is GIC
> +in case of Exynos4.
> +
> +Required properties:
> +- compatible: should be "samsung,exynos4-combiner".
> +- interrupt-cells: should be <2>. The meaning of the cells are
> +    * First Cell: Combiner Group Number.
> +    * Second Cell: Interrupt within the group.
> +- reg: Base address and size of interrupt combiner registers.
> +- interrupt-controller: Identifies the node as an interrupt controller.
> +
> +Example:
> +
> +	combiner: interrupt-controller at 10440000 {
> +		compatible = "samsung,exynos4-combiner";
> +		#interrupt-cells = <2>;
> +		interrupt-controller;
> +		reg = <0x10440000 0x200>;
> +	};
> diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
> index 358624d..776e8d4 100644
> --- a/arch/arm/mach-exynos4/cpu.c
> +++ b/arch/arm/mach-exynos4/cpu.c
> @@ -10,6 +10,8 @@
>  
>  #include <linux/sched.h>
>  #include <linux/sysdev.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
>  
>  #include <asm/mach/map.h>
>  #include <asm/mach/irq.h>
> @@ -38,6 +40,8 @@ unsigned int gic_bank_offset __read_mostly;
>  extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
>  			 unsigned int irq_start);
>  extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
> +extern void combiner_init_dt(struct device_node *node,
> +				struct device_node *parent);
>  
>  /* Initial IO mappings */
>  static struct map_desc exynos4_iodesc[] __initdata = {
> @@ -229,13 +233,27 @@ static void exynos4_gic_irq_fix_base(struct irq_data *d)
>  			    (gic_bank_offset * smp_processor_id());
>  }
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id exynos4_dt_irq_match[] = {
> +	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
> +	{ .compatible = "samsung,exynos4-combiner", .data = combiner_init_dt, },
> +	{},
> +};
> +#endif
> +
>  void __init exynos4_init_irq(void)
>  {
>  	int irq;
>  
>  	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
>  
> -	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
> +#ifdef CONFIG_OF
> +	if (of_have_populated_dt())
> +		of_irq_init(exynos4_dt_irq_match);
> +	else
> +#endif

With the proper empty implementations of of_have_populated_dt() and
of_irq_init(), the #ifdef block here should probably be removed.

> +		gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
> +
>  	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
>  	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
>  	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
> diff --git a/arch/arm/mach-exynos4/irq-combiner.c b/arch/arm/mach-exynos4/irq-combiner.c
> index 5a2758a..198bd0d 100644
> --- a/arch/arm/mach-exynos4/irq-combiner.c
> +++ b/arch/arm/mach-exynos4/irq-combiner.c
> @@ -12,7 +12,12 @@
>   * published by the Free Software Foundation.
>  */
>  
> +#include <linux/errno.h>
>  #include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/slab.h>
>  
>  #include <asm/mach/irq.h>
>  
> @@ -122,3 +127,43 @@ void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
>  		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
>  	}
>  }
> +
> +#ifdef CONFIG_OF
> +/* Translate dt irq specifier to linux virq for interrupt combiner controller */
> +static int exynos4_irq_domain_combiner_dt_translate(struct irq_domain *d,
> +			struct device_node *controller,
> +			const u32 *intspec, unsigned int intsize,
> +			unsigned long *out_hwirq, unsigned int *out_type)
> +{
> +	if (d->of_node != controller)
> +		return -EINVAL;
> +	if (intsize < 2)
> +		return -EINVAL;
> +
> +	*out_hwirq = COMBINER_IRQ(intspec[0], intspec[1]);
> +	*out_type = IRQ_TYPE_NONE;
> +	return 0;
> +}
> +
> +static struct irq_domain_ops exynos4_irq_domain_combiner_ops = {
> +	.dt_translate = exynos4_irq_domain_combiner_dt_translate,
> +};
> +
> +void __init combiner_init_dt(struct device_node *node,
> +					struct device_node *parent)
> +{
> +	struct irq_domain *domain;
> +
> +	if (WARN(!node, "combiner_init_dt: invalid node in parameter\n"))
> +		return;
> +
> +	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
> +	if (domain) {
> +		domain->of_node = node;
> +		domain->ops = &exynos4_irq_domain_combiner_ops;
> +		irq_domain_add(domain);
> +	} else {
> +		WARN_ON(1);
> +	}

I would normally expect this order for error handling :

	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
	if (!domain) {
		WARN_ON(1);
		return;
	}

	domain->of_node = node;
	domain->ops = &exynos4_irq_domain_combiner_ops;
	irq_domain_add(domain);

But having said that, I don't think this is the right approach.
combiner_init_dt I would expect to call combiner_init(), and the
irq_domain should become part of the combiner_chip_data structure so
that it can be used for mapping back and forth from linux and hqirq
numbers.  (irq_data->hwirq and the mapping function).  Rolling the
irq_domain into the irq controller private data structure is what was
done for the GIC too.

g.



More information about the devicetree-discuss mailing list