[PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
nicolas.ferre at atmel.com
Thu Oct 13 03:34:55 EST 2011
On 10/11/2011 04:16 PM, Vinod Koul :
> On Mon, 2011-10-10 at 18:37 +0200, Nicolas Ferre wrote:
>> We remove platform data from DMA controller and move
>> to the use of .id_table to distinguish between compatible
>> types. The two implementations allow to determine the
>> number of channels and the capabilities of the controller.
>>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
>> ---
>> drivers/dma/at_hdmac.c | 48 ++++++++++++++++++++++++++++++++++---------
>> drivers/dma/at_hdmac_regs.h | 8 +++++++
>> 2 files changed, 46 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
>> index fcfa0a8..fef57bc 100644
>> --- a/drivers/dma/at_hdmac.c
>> +++ b/drivers/dma/at_hdmac.c
>> @@ -1175,6 +1175,18 @@ static void atc_free_chan_resources(struct dma_chan *chan)
>>
>> /*-- Module Management -----------------------------------------------*/
>>
>> +static struct platform_device_id atdma_devtypes[] = {
>> + {
>> + .name = "at91sam9rl_dma",
>> + .driver_data = ATDMA_DEVTYPE_SAM9RL,
>> + }, {
>> + .name = "at91sam9g45_dma",
>> + .driver_data = ATDMA_DEVTYPE_SAM9G45,
>> + }, {
>> + /* sentinel */
>> + }
>> +};
>> +
>> /**
>> * at_dma_off - disable DMA controller
>> * @atdma: the Atmel HDAMC device
>> @@ -1193,18 +1205,32 @@ static void at_dma_off(struct at_dma *atdma)
>>
>> static int __init at_dma_probe(struct platform_device *pdev)
>> {
>> - struct at_dma_platform_data *pdata;
>> struct resource *io;
>> struct at_dma *atdma;
>> size_t size;
>> int irq;
>> int err;
>> int i;
>> + u32 nr_channels;
>> + dma_cap_mask_t cap_mask = {};
>> + enum atdma_devtype atdmatype;
>> +
>> + dma_cap_set(DMA_MEMCPY, cap_mask);
>> +
>> + /* get DMA parameters from controller type */
>> + atdmatype = platform_get_device_id(pdev)->driver_data;
>>
>> - /* get DMA Controller parameters from platform */
>> - pdata = pdev->dev.platform_data;
>> - if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS)
>> + switch (atdmatype) {
>> + case ATDMA_DEVTYPE_SAM9RL:
>> + nr_channels = 2;
>> + break;
>> + case ATDMA_DEVTYPE_SAM9G45:
>> + nr_channels = 8;
>> + dma_cap_set(DMA_SLAVE, cap_mask);
>> + break;
>> + default:
>> return -EINVAL;
>> + }
>>
>> io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> if (!io)
>> @@ -1215,14 +1241,15 @@ static int __init at_dma_probe(struct platform_device *pdev)
>> return irq;
>>
>> size = sizeof(struct at_dma);
>> - size += pdata->nr_channels * sizeof(struct at_dma_chan);
>> + size += nr_channels * sizeof(struct at_dma_chan);
>> atdma = kzalloc(size, GFP_KERNEL);
>> if (!atdma)
>> return -ENOMEM;
>>
>> - /* discover transaction capabilites from the platform data */
>> - atdma->dma_common.cap_mask = pdata->cap_mask;
>> - atdma->all_chan_mask = (1 << pdata->nr_channels) - 1;
>> + /* discover transaction capabilites */
> capabilities
Yes.
>> + atdma->dma_common.cap_mask = cap_mask;
>> + atdma->all_chan_mask = (1 << nr_channels) - 1;
>> + atdma->devtype = atdmatype;
>>
>> size = resource_size(io);
>> if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
>> @@ -1268,7 +1295,7 @@ static int __init at_dma_probe(struct platform_device *pdev)
>>
>> /* initialize channels related values */
>> INIT_LIST_HEAD(&atdma->dma_common.channels);
>> - for (i = 0; i < pdata->nr_channels; i++) {
>> + for (i = 0; i < nr_channels; i++) {
>> struct at_dma_chan *atchan = &atdma->chan[i];
>>
>> atchan->chan_common.device = &atdma->dma_common;
>> @@ -1313,7 +1340,7 @@ static int __init at_dma_probe(struct platform_device *pdev)
>> dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
>> dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
>> dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ? "slave " : "",
>> - pdata->nr_channels);
>> + nr_channels);
> indent?
Well, this dev_info statement seems pretty well indented: if I use a
tab, then I cross the 80 column rule, and I would like to keep the "?:"
operator on one line... So I would like to keep it like this.
>> dma_async_device_register(&atdma->dma_common);
>>
>> @@ -1495,6 +1522,7 @@ static const struct dev_pm_ops at_dma_dev_pm_ops = {
>> static struct platform_driver at_dma_driver = {
>> .remove = __exit_p(at_dma_remove),
>> .shutdown = at_dma_shutdown,
>> + .id_table = atdma_devtypes,
>> .driver = {
>> .name = "at_hdmac",
>> .pm = &at_dma_dev_pm_ops,
>> diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
>> index aa4c9ae..d7d6737 100644
>> --- a/drivers/dma/at_hdmac_regs.h
>> +++ b/drivers/dma/at_hdmac_regs.h
>> @@ -248,9 +248,16 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
>>
>> /*-- Controller ------------------------------------------------------*/
>>
>> +enum atdma_devtype {
>> + ATDMA_DEVTYPE_UNDEFINED = 0,
>> + ATDMA_DEVTYPE_SAM9RL, /* compatible with SAM9RL DMA controller */
>> + ATDMA_DEVTYPE_SAM9G45, /* compatible with SAM9G45 DMA controller */
>> +};
>> +
>> /**
>> * struct at_dma - internal representation of an Atmel HDMA Controller
>> * @chan_common: common dmaengine dma_device object members
>> + * @atdma_devtype: identifier of DMA controller compatibility
>> * @ch_regs: memory mapped register base
>> * @clk: dma controller clock
>> * @save_imr: interrupt mask register that is saved on suspend/resume cycle
>> @@ -260,6 +267,7 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
>> */
>> struct at_dma {
>> struct dma_device dma_common;
>> + enum atdma_devtype devtype;
>> void __iomem *regs;
>> struct clk *clk;
>> u32 save_imr;
> Little confused at this, where is the remove of existing platfrom data
> per the changelog?
Well, yes, it is the use of platform data that is removed, not the
structure it self. I change the log message in my v2 patch series.
thanks, bye,
--
Nicolas Ferre
More information about the devicetree-discuss
mailing list