April 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Apr 1 01:48:18 EST 2012
Ending: Mon Apr 30 23:53:28 EST 2012
Messages: 599

• powerpc/85xx: p2020rdb - move the NAND address.   Kumar Gala
• [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
  • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Geert Uytterhoeven
    • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
  • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Linas Vepstas
  • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
  • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Linas Vepstas
    • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Randy Dunlap
      • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
  • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Eric Dumazet
    • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
      • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Lorenz Kolb
      • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
  • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Russell King - ARM Linux
    • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
    • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Thomas Gleixner
      • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
  • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Borislav Petkov
    • [PATCH RFC] Simplify the Linux kernel by reducing its state space   Paul E. McKenney
• [RFC] PS3 updates for the highmem region   Geoff Levand
• [PATCH v2 1/4] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
  • [PATCH v2 2/4] powerpc/fsl-pci: Using common pci/pcie initialization for all boards   Jia Hongtao
  • [PATCH v2 3/4] powerpc/fsl-pci: Only scan PCI bus if configured as a host   Jia Hongtao
  • [PATCH v2 4/4] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao
• [RFC] powerpc/fsl-pci: Document the "fsl, has-isa" property for Freescale PCI   Jia Hongtao
  • [RFC] powerpc/fsl-pci: Document the "fsl, has-isa" property for Freescale PCI   Kumar Gala
    • [RFC] powerpc/fsl-pci: Document the "fsl,has-isa" property for Freescale PCI   Jia Hongtao-B38951
      • [RFC] powerpc/fsl-pci: Document the "fsl,has-isa" property for Freescale PCI   Jia Hongtao-B38951
      • [RFC] powerpc/fsl-pci: Document the "fsl,has-isa" property for Freescale PCI   Jia Hongtao-B38951
• [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
  • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
    • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
  • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
    • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Grant Likely
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Russell King - ARM Linux
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Russell King - ARM Linux
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Grant Likely
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Grant Likely
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Grant Likely
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Grant Likely
    • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Thomas Gleixner
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
      • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Andreas Schwab
    • [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead   Benjamin Herrenschmidt
• kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Frank E. Svendsbøe
  • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Benjamin Herrenschmidt
    • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Tony Breeds
      • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Frank E. Svendsbøe
  • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Josh Boyer
    • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Benjamin Herrenschmidt
      • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Josh Boyer
    • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Wolfgang Denk
      • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Stephen Rothwell
      • kilauea compilation breaks with v3.3 kernel and ELDK 4.2   Wolfgang Denk
• powerpc/kvm: Fallout from system.h disintegration   Benjamin Herrenschmidt
• [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Kumar Gala
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
• [PATCH 1/5] powerpc: dts: klondike: Add AHB, APB bus; remove OPB bus   Tanmay Inamdar
• [PATCH 2/5] powerpc: 40x: Add AHB, APB of_device_ids   Tanmay Inamdar
  • [PATCH 3/5] powerpc: dts: klondike: Add UART nodes   Tanmay Inamdar
    • [PATCH 3/5] powerpc: dts: klondike: Add UART nodes   Grant Likely
      • [PATCH 3/5] powerpc: dts: klondike: Add UART nodes   Josh Boyer
      • [PATCH 3/5] powerpc: dts: klondike: Add UART nodes   Tanmay Inamdar
  • [PATCH 4/5] powerpc: config: 40x: Add 16650 UART support in klondike defconfig   Tanmay Inamdar
    • [PATCH 5/5] powerpc: kernel: 16650 UART reg-shift support   Tanmay Inamdar
• [REGRESSION][PATCH V4 1/3] bpf jit: Make the filter.c::__load_pointer helper non-static for the jits   David Laight
  • [REGRESSION][PATCH V4 1/3] bpf jit: Make the filter.c::__load_pointer helper non-static for the jits   Jan Seiffert
  • [REGRESSION][PATCH V4 1/3] bpf jit: Make the filter.c::__load_pointer helper non-static for the jits   David Miller
• [PATCH 08/18] PCI, powerpc: Register busn_res for root buses   Milton Miller
  • [PATCH 08/18] PCI, powerpc: Register busn_res for root buses   Milton Miller
    • [PATCH 08/18] PCI, powerpc: Register busn_res for root buses   Benjamin Herrenschmidt
• [PATCH 37/69] TTY: HVC, add tty_port   Jiri Slaby
• [PATCH 38/69] TTY: HVC, use tty from tty_port   Jiri Slaby
• [PATCH 39/69] TTY: HVC, use count from tty_port   Jiri Slaby
• [PATCH 40/69] TTY: hvcs, add tty_port   Jiri Slaby
• [PATCH 41/69] TTY: hvcs, use kref from tty_port   Jiri Slaby
• [PATCH 42/69] TTY: hvcs, use tty from tty_port   Jiri Slaby
• [PATCH 43/69] TTY: hvsi, CLOCAL is not in tty->flags   Jiri Slaby
• [PATCH 44/69] TTY: hvsi, add tty_port   Jiri Slaby
• [PATCH 45/69] TTY: hvsi, sanitize uses of tty   Jiri Slaby
• [PATCH 46/69] TTY: hvsi, use tty from tty_port   Jiri Slaby
• [git pull] Please pull powerpc.git next branch   Tabi Timur-B04825
• [PATCH] powerpc/boot: Only build board support files when required.   Tony Breeds
  • [PATCH] powerpc/boot: Only build board support files when required.   David Gibson
    • [PATCH] powerpc/boot: Only build board support files when required.   Benjamin Herrenschmidt
    • [PATCH] powerpc/boot: Only build board support files when required.   Tony Breeds
  • [PATCH] powerpc/boot: Only build board support files when required.   Stephen Rothwell
    • [PATCH] powerpc/boot: Only build board support files when required.   Tony Breeds
      • [PATCH] powerpc/boot: Only build board support files when required.   Stephen Rothwell
  • [PATCH v2] powerpc/boot: Only build board support files when required.   Tony Breeds
  • [PATCH] powerpc/boot: Only build board support files when required.   Geoff Levand
• [PATCH] [v1] powerpc/44x: Support CPM for Maui APM821xxx SoC and Bluestone board   Mai La
• 3.4.0-rc1: No init found   Christian Kujau
  • 3.4.0-rc1: No init found   Benjamin Herrenschmidt
    • 3.4.0-rc1: No init found   Christian Kujau
      • 3.4.0-rc1: No init found   Christian Kujau
      • 3.4.0-rc1: No init found   Suzuki K. Poulose
      • 3.4.0-rc1: No init found   Christian Kujau
      • 3.4.0-rc1: No init found   Benjamin Herrenschmidt
      • 3.4.0-rc1: No init found   Christian Kujau
    • 3.4.0-rc1: No init found   Christian Kujau
• [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Thang Q. Nguyen
  • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Sergei Shtylyov
    • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Thang Nguyen
    • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Jeff Garzik
      • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Thang Nguyen
      • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Jeff Garzik
  • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Sergei Shtylyov
    • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Thang Nguyen
      • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Sergei Shtylyov
      • [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Thang Q. Nguyen
• Help initialize phy-less ethernet in 2.6.38   Fabio
• P4080 Device tree   dimitar
  • P4080 Device tree   Scott Wood
• [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   David Miller
  • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Benjamin Herrenschmidt
    • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Benjamin Herrenschmidt
      • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Benjamin Herrenschmidt
      • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Jan Seiffert
      • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Benjamin Herrenschmidt
      • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Jan Seiffert
      • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Benjamin Herrenschmidt
      • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Jan Seiffert
      • [REGRESSION][PATCH V4 3/3] bpf jit: Let the powerpc jit handle negative offsets   Benjamin Herrenschmidt
      • [REGRESSION][PATCH V5 3/3] bpf jit: Let the powerpc jit handle negative offsets   Jan Seiffert
• Need Xserve G5 (or power supply for it)   Benjamin Herrenschmidt
• [PATCH] powerpc: Option FB_FSL_DIU is not really optional for mpc512x   Paul Gortmaker
  • [PATCH] powerpc: Option FB_FSL_DIU is not really optional for mpc512x   Anatolij Gustschin
• [PATCH 1/1] dts:bluestone: Add support 2 SATA ports   Thang Q. Nguyen
• [PATCH] powerpc: select PPC_CLOCK unconditionally for FSL_SOC   Shawn Guo
  • [PATCH] powerpc: select PPC_CLOCK unconditionally for FSL_SOC   Kumar Gala
    • [alsa-devel] [PATCH] powerpc: select PPC_CLOCK unconditionally for FSL_SOC   Shawn Guo
• [PATCH 3/4] powerpc/mpic: Move internal interrupt source vector allocation to a separate function.   Sethi Varun-B16395
  • [PATCH 3/4] powerpc/mpic: Move internal interrupt source vector allocation to a separate function.   Benjamin Herrenschmidt
• [PATCH 1/4] powerpc: Hide some system call labels from profile tools   Anton Blanchard
  • [PATCH 2/4] powerpc: No need to save XER in a system call   Anton Blanchard
  • [PATCH 3/4] powerpc: Better scheduling of CR save code in system call path   Anton Blanchard
    • [PATCH 3/4 v2] powerpc: Better scheduling of CR save code in system call path   Anton Blanchard
  • [PATCH 4/4] powerpc: No need to preserve count register across system call   Anton Blanchard
• [PATCH 03/12] powerpc: Rework runlatch code   Andreas Schwab
  • [PATCH 03/12] powerpc: Rework runlatch code   Benjamin Herrenschmidt
    • [PATCH 03/12] powerpc: Rework runlatch code   Andreas Schwab
  • [PATCH 03/12] powerpc: Rework runlatch code   Benjamin Herrenschmidt
    • [PATCH 03/12] powerpc: Rework runlatch code   Andreas Schwab
• [PATCH 1/1] [v3] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Thang Q. Nguyen
  • [PATCH 1/1] [v3] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Sergei Shtylyov
  • [PATCH 1/1] [v3] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c   Sergei Shtylyov
• [PATCH] Use clockevent multiplier and shifter for decrementer   Scott Wood
• kernel3.2.13 cannot boot on my mpc8260 board using u-boot2011.12   jerry_dw
• [PATCH 1/2] [v4] powerpc/44x: Fix PCI MSI support for Maui APM821xx SoC and Bluestone board   Mai La
• [PATCH 2/2] powerpc/44x: Add PCI MSI node for APM821xx SoC and Bluestone board in DTS   Mai La
• [PATCH v2] KVM: PPC: Use clockevent multiplier and shifter for decrementer   Bharat Bhushan
  • [PATCH v2] KVM: PPC: Use clockevent multiplier and shifter for decrementer   Alexander Graf
• [PATCH] driver/mtd: IFC NAND: Add support of ONFI NAND flash   Prabhakar Kushwaha
  • [PATCH] driver/mtd: IFC NAND: Add support of ONFI NAND flash   Artem Bityutskiy
• [V2 1/5] powerpc: dts: klondike: Add AHB, APB bus; remove OPB bus   Tanmay Inamdar
• [V2 2/5] powerpc: 40x: Add AHB, APB of_device_ids   Tanmay Inamdar
  • [V2 3/5] powerpc: dts: klondike: Add UART nodes   Tanmay Inamdar
    • [V2 4/5] powerpc: config: 40x: Add 16650 UART support in klondike defconfig   Tanmay Inamdar
      • [V2 5/5] powerpc: kernel: 16650 UART reg-shift support   Tanmay Inamdar
• [PATCH] powerpc: 512x: Fix mpc5121_clk_get()   Richard Weinberger
  • [PATCH] powerpc: 512x: Fix mpc5121_clk_get()   Anatolij Gustschin
• [PATCH 00/14] Backport 8xx TLB to 2.4   Willy Tarreau
• Problem with framebuffer mmap on platforms with large addressing   Dmitry Eremin-Solenikov
  • Problem with framebuffer mmap on platforms with large addressing   Benjamin Herrenschmidt
• [PATCH] gianfar: add missing include   Michael Neuling
  • [PATCH] gianfar: add missing include   Richard Cochran
    • [PATCH] gianfar: add missing include   Michael Neuling
• [PATCH v2 00/17] Platform Facilities Option and crypto accelerators   Kent Yoder
  • [PATCH v2 01/17] powerpc: Add new hvcall constants to support PFO   Kent Yoder
  • [PATCH v2 02/17] powerpc: Add pseries update notifier for OFDT prop changes   Kent Yoder
  • [PATCH v2 03/17] powerpc: Add PFO support to the VIO bus   Kent Yoder
  • [PATCH v2 04/17] hwrng: pseries - PFO-based hwrng driver   Kent Yoder
  • [PATCH v2 05/17] pseries: Enabled the PFO-based RNG accelerator   Kent Yoder
  • [PATCH v2 06/17] powerpc: crypto: AES-CBC mode routines for nx encryption   Kent Yoder
  • [PATCH v2 07/17] powerpc: crypto: AES-CCM mode routines for nx encryption   Kent Yoder
  • [PATCH v2 08/17] powerpc: crypto: AES-CTR mode routines for nx encryption   Kent Yoder
  • [PATCH v2 09/17] powerpc: crypto: AES-ECB mode routines for nx encryption   Kent Yoder
  • [PATCH v2 10/17] powerpc: crypto: AES-GCM mode routines for nx encryption   Kent Yoder
  • [PATCH v2 11/17] powerpc: crypto: AES-XCBC mode routines for nx encryption   Kent Yoder
  • [PATCH v2 12/17] powerpc: crypto: SHA256 hash routines for nx encryption   Kent Yoder
  • [PATCH v2 13/17] powerpc: crypto: SHA512 hash routines for nx encryption   Kent Yoder
  • [PATCH v2 14/17] powerpc: crypto: nx driver code supporting nx encryption   Kent Yoder
    • [PATCH v2 14/17] powerpc: crypto: nx driver code supporting nx encryption   David Miller
      • [PATCH v2 14/17] powerpc: crypto: nx driver code supporting nx encryption   Kent Yoder
  • [PATCH v2 15/17] powerpc: crypto: debugfs routines and docs for the nx device driver   Kent Yoder
  • [PATCH v2 16/17] powerpc: crypto: Build files for the nx device driver   Kent Yoder
  • [PATCH v2 17/17] powerpc: crypto: enable the PFO-based encryption device   Kent Yoder
• [PATCH 1/3] powerpc: Clean up lppaca->cede_latency_hint   Anton Blanchard
  • [PATCH 2/3] powerpc: Remove iseries specific fields in lppaca   Anton Blanchard
  • [PATCH 3/3] powerpc: Reformat lppaca.h   Anton Blanchard
• linux-next: boot failures with next-20120411   Stephen Rothwell
  • linux-next: boot failures with next-20120411   Milton Miller
  • linux-next: boot failures with next-20120411   Michael Neuling
    • linux-next: boot failures with next-20120411   Stephen Rothwell
    • linux-next: boot failures with next-20120411   Jiri Slaby
      • linux-next: boot failures with next-20120411   Jiri Slaby
      • linux-next: boot failures with next-20120411   Michael Neuling
      • [PATCH 1/1] TTY: hvc, fix TTY refcounting   Jiri Slaby
• Network problem with 3.3   Gary Thomas
  • Network problem with 3.3   Gary Thomas
  • Network problem with 3.3   Gary Thomas
    • Network problem with 3.3   Joakim Tjernlund
      • Network problem with 3.3   Gary Thomas
• [PATCH] powerpc/e6500: add CPU_FTR_EMB_HV to CPU table   Scott Wood
  • [PATCH] powerpc/e6500: add CPU_FTR_EMB_HV to CPU table   Kumar Gala
• [RFC] powerpc: set_dma_ops for pci hotplug   Hiroo Matsumoto
  • [RFC] powerpc: set_dma_ops for pci hotplug   Hiroo Matsumoto
• [GIT PULL] irq_domain bug fixes against v3.4-rc2   Grant Likely
• mpc5200b: invalid IRQ   Cyril Strejc
• [PATCH v3 00/17] Platform Facilities Option and crypto accelerators   Kent Yoder
  • [PATCH v3 08/17] powerpc: crypto: AES-CCM mode routines for nx encryption   Kent Yoder
• [PATCH v3 01/17] powerpc: Add new hvcall constants to support PFO   Kent Yoder
• [PATCH v3 02/17] powerpc: Add pseries update notifier for OFDT prop changes   Kent Yoder
• [PATCH v3 03/17] powerpc: Add PFO support to the VIO bus   Kent Yoder
• [PATCH v3 04/17] hwrng: pseries - PFO-based hwrng driver   Kent Yoder
• [PATCH v3 05/17] pseries: Enabled the PFO-based RNG accelerator   Kent Yoder
• [PATCH v3 06/17] powerpc: crypto: nx driver code supporting nx encryption   Kent Yoder
• [PATCH v3 07/17] powerpc: crypto: AES-CBC mode routines for nx encryption   Kent Yoder
• [PATCH v3 09/17] powerpc: crypto: AES-CTR mode routines for nx encryption   Kent Yoder
• [PATCH v3 10/17] powerpc: crypto: AES-ECB mode routines for nx encryption   Kent Yoder
• [PATCH v3 11/17] powerpc: crypto: AES-GCM mode routines for nx encryption   Kent Yoder
• [PATCH v3 12/17] powerpc: crypto: AES-XCBC mode routines for nx encryption   Kent Yoder
• [PATCH v3 13/17] powerpc: crypto: SHA256 hash routines for nx encryption   Kent Yoder
• [PATCH v3 14/17] powerpc: crypto: SHA512 hash routines for nx encryption   Kent Yoder
• [PATCH v3 15/17] powerpc: crypto: debugfs routines and docs for the nx device driver   Kent Yoder
• [PATCH v3 16/17] powerpc: crypto: Build files for the nx device driver   Kent Yoder
• [PATCH v3 17/17] powerpc: crypto: enable the PFO-based encryption device   Kent Yoder
• [PATCH v5 00/21] EEH reorganization   Anton Blanchard
  • [PATCH v5 00/21] EEH reorganization   Anton Blanchard
    • [PATCH v5 00/21] EEH reorganization   Gavin Shan
      • [PATCH v5 00/21] EEH reorganization   Anton Blanchard
      • [PATCH v5 00/21] EEH reorganization   Benjamin Herrenschmidt
      • [PATCH v5 00/21] EEH reorganization   Gavin Shan
• userspace o/p to kernel buffer   Sumesh Kaana
  • userspace o/p to kernel buffer   Jenkins, Clive
• patch "TTY: hvc, fix TTY refcounting" added to tty tree   gregkh at linuxfoundation.org
• P4080 target has 16G memory stability issues ...   Robert Sciuk
• [PATCH] powerpc/fsl: Distribute interrupts on all CPUs by default   Kim Phillips
• [PATCH 1/4] powerpc/mpic_msgr: fix compile error when SMP disabled   Mingkai Hu
  • [PATCH 2/4] powerpc/mpic_msgr: add lock for MPIC message global variable   Mingkai Hu
    • [PATCH 3/4] powerpc/mpic_msgr: fix offset error when setting mer register   Mingkai Hu
      • [PATCH 4/4] powerpc/mpc85xx: add MPIC message dts node   Mingkai Hu
      • [PATCH 4/4] powerpc/mpc85xx: add MPIC message dts node   Kumar Gala
      • [PATCH 3/4] powerpc/mpic_msgr: fix offset error when setting mer register   Kumar Gala
    • [PATCH 2/4] powerpc/mpic_msgr: add lock for MPIC message global variable   Kumar Gala
  • [PATCH 1/4] powerpc/mpic_msgr: fix compile error when SMP disabled   Kumar Gala
• PPC / USB: kernel hangs in warm boot on 8513 in fsl-ehci   Anthony Foiani
  • PPC / USB: kernel hangs in warm boot on 8513 in fsl-ehci   Greg KH
  • PPC / USB: kernel hangs in warm boot on 8513 in fsl-ehci   Scott Wood
• [PATCH] powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]   Paul Gortmaker
  • [PATCH] powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]   David Howells
• [PATCH 1/2] powerpc: Remove empty giveup_altivec function on book3e CPUs   Anton Blanchard
  • [PATCH 2/2] powerpc: Optimise enable_kernel_altivec   Anton Blanchard
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Linus Walleij
  • [ORLinux] [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Jonas Bonn
  • [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Mark Brown
    • [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Linus Walleij
• [PATCH] [44x][KEXEC] Fix/Initialize PID to kernel PID before the TLB search   Suzuki K. Poulose
• [PATCH 0/2] Kdump support for 47x   Suzuki K. Poulose
  • [PATCH 1/2] [47x] Kernel support for KEXEC   Suzuki K. Poulose
  • [PATCH 2/2] [47x] Enable CRASH_DUMP   Suzuki K. Poulose
  • [PATCH 0/2] Kdump support for 47x   Suzuki K. Poulose
    • [PATCH 0/2] Kdump support for 47x   Josh Boyer
• [PATCH 13/17] KVM: PPC: Allow book3s_hv guests to use SMT processor modes   Alexander Graf
  • [PATCH 13/17] KVM: PPC: Allow book3s_hv guests to use SMT processor modes   Paul Mackerras
    • [PATCH 13/17] KVM: PPC: Allow book3s_hv guests to use SMT processor modes   Alexander Graf
• fsl_pmc: update device bindings   Scott Wood
• [PATCH v4 1/4] powerpc/85xx: add HOTPLUG_CPU support   Scott Wood
  • [PATCH v4 1/4] powerpc/85xx: add HOTPLUG_CPU support   Li Yang-R58472
    • [PATCH v4 1/4] powerpc/85xx: add HOTPLUG_CPU support   Scott Wood
• [EDAC PATCH v13 2/7] edac: move dimm properties to struct dimm_info   Mauro Carvalho Chehab
  • [EDAC PATCH v13 2/7] edac: move dimm properties to struct dimm_info   Borislav Petkov
• [EDAC PATCH v13 4/7] edac: move nr_pages to dimm struct   Mauro Carvalho Chehab
  • [EDAC PATCH v13 4/7] edac: move nr_pages to dimm struct   Borislav Petkov
  • [EDAC PATCH v13 4/7] edac: move nr_pages to dimm struct   Mauro Carvalho Chehab
    • [EDAC PATCH v13 4/7] edac: move nr_pages to dimm struct   Borislav Petkov
      • [EDAC PATCH v13 4/7] edac: move nr_pages to dimm struct   Mauro Carvalho Chehab
      • [PATCH] edac: move nr_pages to dimm struct   Mauro Carvalho Chehab
• [EDAC PATCH v13 7/7] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
  • [PATCH] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
• [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Grant Likely
  • [PATCH 2/2] irqdomain/powerpc: Fix broken NR_IRQ references   Grant Likely
    • [PATCH 2/2] irqdomain/powerpc: Fix broken NR_IRQ references   Michael Ellerman
      • [PATCH 2/2] irqdomain/powerpc: Fix broken NR_IRQ references   Grant Likely
  • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Grant Likely
    • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Benjamin Herrenschmidt
      • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Grant Likely
      • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Joakim Tjernlund
      • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Benjamin Herrenschmidt
      • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Joakim Tjernlund
  • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Benjamin Herrenschmidt
    • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Grant Likely
    • [PATCH 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Grant Likely
• [EDAC_ABI PATCH v13 20/26] pasemi_edac: convert driver to use the new edac ABI   Mauro Carvalho Chehab
• [EDAC ABI v13 07/25] edac: Rename the parent dev to pdev   Mauro Carvalho Chehab
• [EDAC ABI v13 24/25] edac: change the mem allocation scheme to make Documentation/kobject.txt happy   Mauro Carvalho Chehab
  • [EDAC ABI v13 24/25] edac: change the mem allocation scheme to make Documentation/kobject.txt happy   Joe Perches
    • [EDAC ABI v13 24/25] edac: change the mem allocation scheme to make Documentation/kobject.txt happy   Mauro Carvalho Chehab
      • [EDAC ABI v13 24/25] edac: change the mem allocation scheme to make Documentation/kobject.txt happy   Joe Perches
    • [PATCH] edac: change the mem allocation scheme to make Documentation/kobject.txt happy   Mauro Carvalho Chehab
      • [PATCH] edac: change the mem allocation scheme to make Documentation/kobject.txt happy   Greg K H
• [PATCH 1/2] powerpc/mpc85xx: p1022ds support the MTD for NOR and NAND flash   Chang-Ming.Huang at freescale.com
  • [PATCH 2/2] powerpc/p1022ds/DTS: Add RTC support   Chang-Ming.Huang at freescale.com
• [PATCH v3]KVM: PPC: Use clockevent multiplier and shifter for decrementer   Bharat Bhushan
  • [PATCH v3]KVM: PPC: Use clockevent multiplier and shifter for decrementer   Alexander Graf
• [PATCH] powerpc/eeh: crash caused by null eeh_dev   Gavin Shan
  • [PATCH] powerpc/eeh: crash caused by null eeh_dev   Anton Blanchard
• [PATCH 1/7] Add support hardreset   Thang Q. Nguyen
  • [PATCH 1/7] Add support hardreset   Sergei Shtylyov
• [PATCH v2 1/2] powerpc/mpc85xx: support the MTD for p1022ds flash   Chang-Ming.Huang at freescale.com
  • [PATCH v2 1/2] powerpc/mpc85xx: support the MTD for p1022ds flash   Tabi Timur-B04825
    • [PATCH v2 1/2] powerpc/mpc85xx: support the MTD for p1022ds flash   Huang Changming-R66093
      • [PATCH v2 1/2] powerpc/mpc85xx: support the MTD for p1022ds flash   Huang Changming-R66093
      • [PATCH v2 1/2] powerpc/mpc85xx: support the MTD for p1022ds flash   Timur Tabi
• [PATCH] Drivers: ps3: ps3av.c: fixed checkpatch warnings   Geert Uytterhoeven
  • [PATCH] Drivers: ps3: ps3av.c: fixed checkpatch warnings   Valentin Ilie
    • [PATCH] Drivers: ps3: ps3av.c: fixed checkpatch warnings   Valentin Ilie
      • [PATCH] Drivers: ps3: ps3av.c: fixed checkpatch warnings   Jesper Juhl
  • [PATCH] drivers/ps3: Fix checkpatch warnings in ps3av.c   Geoff Levand
• [PATCH 1/2] seccomp: ignore secure_computing return values   Will Drewry
• PowerPC radeon KMS - is it possible?   o jordan
  • PowerPC radeon KMS - is it possible?   Michel Dänzer
  • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
  • PowerPC radeon KMS - is it possible?   Andreas Schwab
    • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
  • PowerPC radeon KMS - is it possible?   Andreas Schwab
    • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
      • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
  • PowerPC radeon KMS - is it possible?   Andreas Schwab
    • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
      • PowerPC radeon KMS - is it possible?   Benjamin Herrenschmidt
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Gerhard Pircher
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Gerhard Pircher
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Gerhard Pircher
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Andreas Schwab
  • PowerPC radeon KMS - is it possible?   Gerhard Pircher
    • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Gerhard Pircher
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Gerhard Pircher
      • PowerPC radeon KMS - is it possible?   Michel Dänzer
      • PowerPC radeon KMS - is it possible?   Gerhard Pircher
• [PATCH] powerpc/85xx: Add back condition for smp   York Sun
  • [PATCH] powerpc/85xx: Add back condition for smp   Scott Wood
    • [PATCH] powerpc/85xx: Add back condition for smp   Kumar Gala
      • [PATCH] powerpc/85xx: Add back condition for smp   Scott Wood
  • [PATCH] powerpc/85xx: Add back condition for smp   Kumar Gala
• [PATCH 1/4] powerpc: Require gcc 4.0 on 64-bit   Anton Blanchard
  • [PATCH 2/4] powerpc: Remove altivec fix for gcc versions before 4.0   Anton Blanchard
  • [PATCH 3/4] powerpc: Add 64-bit CPU targets for gcc   Anton Blanchard
    • [PATCH 3/4] powerpc: Add 64-bit CPU targets for gcc   Kumar Gala
      • [PATCH 3/4] powerpc: Add 64-bit CPU targets for gcc   Benjamin Herrenschmidt
  • [PATCH 4/4] powerpc: Remove CONFIG_POWER4_ONLY   Anton Blanchard
    • [PATCH 4/4] powerpc: Remove CONFIG_POWER4_ONLY   Benjamin Herrenschmidt
      • [PATCH 4/4] powerpc: Remove CONFIG_POWER4_ONLY   Anton Blanchard
      • [PATCH 4/4] powerpc: Remove CONFIG_POWER4_ONLY   Benjamin Herrenschmidt
      • [PATCH 4/4] powerpc: Remove CONFIG_POWER4_ONLY   Anton Blanchard
  • [PATCH 1/4] powerpc: Require gcc 4.0 on 64-bit   Kumar Gala
    • [PATCH 1/4] powerpc: Require gcc 4.0 on 64-bit   Benjamin Herrenschmidt
• [PATCH] powerpc: Use WARN instead of dump_stack when printing EEH error backtrace   Anton Blanchard
• [PATCH] powerpc: Remove old powerpc specific ptrace getregs/setregs calls   Anton Blanchard
• [PATCH v4] KVM: PPC Use clockevent multiplier and shifter for decrementer   Bharat Bhushan
  • [PATCH v4] KVM: PPC Use clockevent multiplier and shifter for decrementer   Alexander Graf
• [PATCH] powerpc: fix build when CONFIG_BOOKE_WDT is enabled   Baruch Siach
  • [PATCH] powerpc: fix build when CONFIG_BOOKE_WDT is enabled   Kumar Gala
• [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Benjamin Herrenschmidt
  • [PATCH 01/15] i2c/powermac: Register i2c devices from device-tree   Benjamin Herrenschmidt
  • [PATCH 07/15] powerpc/pmac: Don't add_timer() twice   Benjamin Herrenschmidt
  • [PATCH 13/15] powerpc/windfarm: Updates to lm75 and max6690 sensors   Benjamin Herrenschmidt
  • [PATCH 01/15] i2c/powermac: Register i2c devices from device-tree   Andreas Schwab
  • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Jean Delvare
    • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Christian Kujau
    • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Benjamin Herrenschmidt
  • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
    • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Jean Delvare
  • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
  • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
  • [PATCH 02/15] powerpc/pmac: Convert therm_adt746x to new i2c probing   Andreas Schwab
  • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
    • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Benjamin Herrenschmidt
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Benjamin Herrenschmidt
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Benjamin Herrenschmidt
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Benjamin Herrenschmidt
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Benjamin Herrenschmidt
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
      • [PATCH 00/15] PowerMac i2c API conversions & windfarm updates   Andreas Schwab
• [PATCH 02/15] powerpc/pmac: Convert therm_adt746x to new i2c probing   Benjamin Herrenschmidt
• [PATCH 03/15] powerpc/pmac: Convert windfarm_lm75 to new i2c probing   Benjamin Herrenschmidt
• [PATCH 04/15] powerpc/pmac: Convert windfarm_max6690 to new i2c probing   Benjamin Herrenschmidt
• [PATCH 05/15] powerpc/pmac: Convert windfarm_smu_sat to new i2c probing   Benjamin Herrenschmidt
• [PATCH 06/15] powerpc/windfarm: const'ify and add "priv" field to controls & sensors   Benjamin Herrenschmidt
• [PATCH 08/15] powerpc/windfarm: Remove spurrious sysfs_attr_init()   Benjamin Herrenschmidt
• [PATCH 09/15] powerpc/windfarm: Improve display of fan speeds in sysfs   Benjamin Herrenschmidt
• [PATCH 10/15] powerpc/windfarm: Add useful accessors   Benjamin Herrenschmidt
• [PATCH 11/15] powerpc/windfarm: Add ad7417 sensor   Benjamin Herrenschmidt
• [PATCH 12/15] powerpc/windfarm: Add lm87 sensor   Benjamin Herrenschmidt
• [PATCH 14/15] powerpc/windfarm: Add Fan Control Unit controls for G5s   Benjamin Herrenschmidt
• [PATCH 15/15] powerpc/powermac: New windfarm driver for PowerMac G5 (AGP) and Xserve G5   Benjamin Herrenschmidt
• [PATCH] powerpc/85xx: don't call of_platform_bus_probe() twice   Kumar Gala
• [PATCH 1/3] powerpc/mpic: Fix confusion between hw_irq and virq   Benjamin Herrenschmidt
  • [PATCH 1/3] powerpc/mpic: Fix confusion between hw_irq and virq   Benjamin Herrenschmidt
    • [PATCH 1/3] powerpc/mpic: Fix confusion between hw_irq and virq   Grant Likely
      • [PATCH 1/3] powerpc/mpic: Fix confusion between hw_irq and virq   Benjamin Herrenschmidt
• [PATCH 2/3] irq: Add IRQ_TYPE_DEFAULT for use by PIC drivers   Benjamin Herrenschmidt
• [PATCH 3/3] powerpc/mpic: Properly set default triggers   Benjamin Herrenschmidt
  • [PATCH 3/3] powerpc/mpic: Properly set default triggers   Andreas Schwab
• [PATCH] gianfar: add GRO support   Jiajun Wu
  • [PATCH] gianfar: add GRO support   David Miller
• pci node question   Yoder Stuart-B08248
  • pci node question   Kumar Gala
    • pci node question   Scott Wood
      • pci node question   Kumar Gala
      • pci node question   Scott Wood
      • pci node question   Benjamin Herrenschmidt
      • pci node question   Benjamin Herrenschmidt
      • pci node question   Benjamin Herrenschmidt
    • pci node question   Yoder Stuart-B08248
    • pci node question   Benjamin Herrenschmidt
      • pci node question   Yoder Stuart-B08248
      • pci node question   Benjamin Herrenschmidt
      • pci node question   Yoder Stuart-B08248
      • pci node question   Benjamin Herrenschmidt
• [PATCH v3 0/9] Fixes for common mistakes w/ for_each_process and task->mm   Anton Vorontsov
  • [PATCH 1/9] cpu: Introduce clear_tasks_mm_cpumask() helper   Anton Vorontsov
    • [PATCH 1/9] cpu: Introduce clear_tasks_mm_cpumask() helper   Andrew Morton
  • [PATCH 2/9] arm: Use clear_tasks_mm_cpumask()   Anton Vorontsov
  • [PATCH 3/9] powerpc: Use clear_tasks_mm_cpumask()   Anton Vorontsov
  • [PATCH 4/9] sh: Use clear_tasks_mm_cpumask()   Anton Vorontsov
  • [PATCH 5/9] blackfin: A couple of task->mm handling fixes   Anton Vorontsov
  • [PATCH 6/9] blackfin: Fix possible deadlock in decode_address()   Anton Vorontsov
  • [PATCH 7/9] um: Should hold tasklist_lock while traversing processes   Anton Vorontsov
    • [PATCH 7/9] um: Should hold tasklist_lock while traversing processes   Richard Weinberger
      • [PATCH 7/9] um: Should hold tasklist_lock while traversing processes   Anton Vorontsov
  • [PATCH 8/9] um: Fix possible race on task->mm   Anton Vorontsov
  • [PATCH 9/9] um: Properly check all process' threads for a live mm   Anton Vorontsov
• [PATCH][2/3][RFC] TDM Framework   Aggrwal Poonam-B10812
  • [PATCH][2/3][RFC] TDM Framework   Scott Wood
    • [PATCH][2/3][RFC] TDM Framework   Aggrwal Poonam-B10812
  • [PATCH][2/3][RFC] TDM Framework   Benjamin Herrenschmidt
    • [PATCH][2/3][RFC] TDM Framework   Singh Sandeep-B37400
• [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   Russell King - ARM Linux
  • [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   Boojin Kim
  • [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   Vinod Koul
    • [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   Boojin Kim
      • [PATCH 5/9] dmaengine: provide a common function for completing a dma descriptor   Russell King - ARM Linux
• Get rid of PowerPC users of NR_IRQS   Grant Likely
  • [PATCH v2 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Grant Likely
    • [PATCH v2 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Benjamin Herrenschmidt
      • [PATCH v2 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Joakim Tjernlund
      • [PATCH v2 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Benjamin Herrenschmidt
      • [PATCH v2 1/2] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller   Scott Wood
  • [PATCH v2 2/2] irqdomain/powerpc: Fix broken NR_IRQ references   Grant Likely
  • [PATCH v2 0/2] Get rid of PowerPC users of NR_IRQS   Grant Likely
• [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
  • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
    • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Joe Perches
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Joe Perches
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Joe Perches
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
    • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
    • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Luck, Tony
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Joe Perches
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
      • [PATCH EDACv16 1/2] edac: Change internal representation to work with layers   Borislav Petkov
• Regression in 32-bit ppc kernel   Larry Finger
  • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
    • Regression in 32-bit ppc kernel   Larry Finger
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
      • Regression in 32-bit ppc kernel   Larry Finger
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
      • Regression in 32-bit ppc kernel   Larry Finger
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
      • Regression in 32-bit ppc kernel   Larry Finger
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
      • Regression in 32-bit ppc kernel   Larry Finger
      • Regression in 32-bit ppc kernel   Andreas Schwab
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
      • Regression in 32-bit ppc kernel   Larry Finger
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
      • Regression in 32-bit ppc kernel   Larry Finger
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
      • Regression in 32-bit ppc kernel   Benjamin Herrenschmidt
• 3.4-rc3 compile failed on IBM Power6   Ryan Wang
  • 3.4-rc3 compile failed on IBM Power6   Nishanth Aravamudan
    • 3.4-rc3 compile failed on IBM Power6   Gavin Shan
      • 3.4-rc3 compile failed on IBM Power6   Benjamin Herrenschmidt
      • 3.4-rc3 compile failed on IBM Power6   Gavin Shan
• [PATCH] ppc/pseries: rivet CONFIG_EEH for pSeries platform   Gavin Shan
• [PATCH 05/10] powerpc/ps3: Use highmem region from repository   Andre Heider
• [PATCH 01/10] powerpc/ps3: Correct lv1 repository routine names   Geoff Levand
• [PATCH 04/10] powerpc/ps3: Add highmem repository read routines   Andre Heider
• [PATCH 06/10] powerpc/ps3: Add highmem region memory early   Hector Martin
• [GIT PULL] PS3 updates for Linux-3.5   Geoff Levand
  • [PATCH 02/10] powerpc/ps3: Add PS3 repository write support   Geoff Levand
  • [PATCH 03/10] powerpc/ps3: Add highmem repository write routines   Geoff Levand
  • [PATCH 07/10] powerpc/ps3: Remove MEMORY_HOTPLUG requirement   Andre Heider
  • [PATCH 09/10] drivers/ps3: Fix checkpatch warnings in ps3av.c   Valentin Ilie
  • [PATCH 10/10] powerpc/ps3: Refresh ps3_defconfig   Geoff Levand
  • [PATCH 08/10] powerpc/ps3: Minor Kconfig cleanup   Geoff Levand
• [PATCH] fsldma: fix performance degradation by optimizing spinlock use.   Shi Xuelin-B29237
  • [PATCH] fsldma: fix performance degradation by optimizing spinlock use.   Li Yang-R58472
• No subject   Jessica Wang
• [PATCH] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Shengzhou Liu
• [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Shengzhou Liu
  • [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Scott Wood
• [PATCH 0/3][RFC] powerpc/ftrace: Removal of stop machine (and other goodies)   Steven Rostedt
  • [PATCH 1/3][RFC] ftrace/ppc: Have PPC skip updating with stop_machine()   Steven Rostedt
• [PATCH 2/3][RFC] powerpc: Have patch_instruction detect faults   Steven Rostedt
• [PATCH 3/3][RFC] ftrace/ppc: Use patch_instruction instead of probe_kernel_write()   Steven Rostedt
• [PATCH v3] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Shengzhou Liu
• [PATCH] tty/serial/pmac_zilog: Fix "nobody cared" IRQ message   Larry Finger
  • [PATCH] tty/serial/pmac_zilog: Fix "nobody cared" IRQ message   Gabriel Paubert
    • [PATCH] tty/serial/pmac_zilog: Fix "nobody cared" IRQ message   Larry Finger
  • [PATCH] tty/serial/pmac_zilog: Fix "nobody cared" IRQ message   Benjamin Herrenschmidt
    • [PATCH] tty/serial/pmac_zilog: Fix "nobody cared" IRQ message   Larry Finger
• [PATCH v2] powerpc/powermac: New windfarm driver for PowerMac G5 (AGP) and Xserve G5   Benjamin Herrenschmidt
• [PATCH] Disable /dev/port interface on powerpc systems   Benjamin Herrenschmidt
• [PATCH] powerpc: Support lower minimum entitlement for virtual processors   Benjamin Herrenschmidt

Last message date: Mon Apr 30 23:53:28 EST 2012
Archived on: Mon Apr 30 23:54:22 EST 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...