[EDAC PATCH v13 4/7] edac: move nr_pages to dimm struct
Mauro Carvalho Chehab
mchehab at redhat.com
Wed Apr 18 05:28:49 EST 2012
Em 17-04-2012 15:48, Borislav Petkov escreveu:
> On Mon, Apr 16, 2012 at 05:12:10PM -0300, Mauro Carvalho Chehab wrote:
>> The number of pages is a dimm property. Move it to the dimm struct.
>>
>> After this change, it is possible to add sysfs nodes for the DIMM's that
>
> Minor nitpick:
>
> DIMMs
>
> Please go over the rest of the commit messages because they have similar
> typos.
>
>> will properly represent the DIMM stick properties, including its size.
>>
>> A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
>> the memory controller represents the memory via chip select rows.
>>
>> Reviewed-by: Aristeu Rozanski <arozansk at redhat.com>
>> Cc: Doug Thompson <norsk5 at yahoo.com>
>> Cc: Borislav Petkov <borislav.petkov at amd.com>
>> Cc: Mark Gross <mark.gross at intel.com>
>> Cc: Jason Uhlenkott <juhlenko at akamai.com>
>> Cc: Tim Small <tim at buttersideup.com>
>> Cc: Ranganathan Desikan <ravi at jetztechnologies.com>
>> Cc: "Arvind R." <arvino55 at gmail.com>
>> Cc: Olof Johansson <olof at lixom.net>
>> Cc: Egor Martovetsky <egor at pasemi.com>
>> Cc: Chris Metcalf <cmetcalf at tilera.com>
>> Cc: Michal Marek <mmarek at suse.cz>
>> Cc: Jiri Kosina <jkosina at suse.cz>
>> Cc: Joe Perches <joe at perches.com>
>> Cc: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
>> Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
>> Cc: Hitoshi Mitake <h.mitake at gmail.com>
>> Cc: Andrew Morton <akpm at linux-foundation.org>
>> Cc: "Niklas Söderlund" <niklas.soderlund at ericsson.com>
>> Cc: Shaohui Xie <Shaohui.Xie at freescale.com>
>> Cc: Josh Boyer <jwboyer at gmail.com>
>> Cc: linuxppc-dev at lists.ozlabs.org
>> Signed-off-by: Mauro Carvalho Chehab <mchehab at redhat.com>
>> ---
>> drivers/edac/amd64_edac.c | 12 +++------
>> drivers/edac/amd76x_edac.c | 6 ++--
>> drivers/edac/cell_edac.c | 8 ++++--
>> drivers/edac/cpc925_edac.c | 8 ++++--
>> drivers/edac/e752x_edac.c | 6 +++-
>> drivers/edac/e7xxx_edac.c | 5 ++-
>> drivers/edac/edac_mc.c | 16 ++++++++-----
>> drivers/edac/edac_mc_sysfs.c | 47 ++++++++++++++++++++++++++++------------
>> drivers/edac/i3000_edac.c | 6 +++-
>> drivers/edac/i3200_edac.c | 3 +-
>> drivers/edac/i5000_edac.c | 14 ++++++-----
>> drivers/edac/i5100_edac.c | 22 +++++++++++-------
>> drivers/edac/i5400_edac.c | 9 ++-----
>> drivers/edac/i7300_edac.c | 22 +++++-------------
>> drivers/edac/i7core_edac.c | 10 ++------
>> drivers/edac/i82443bxgx_edac.c | 2 +-
>> drivers/edac/i82860_edac.c | 2 +-
>> drivers/edac/i82875p_edac.c | 5 ++-
>> drivers/edac/i82975x_edac.c | 11 ++++++--
>> drivers/edac/mpc85xx_edac.c | 3 +-
>> drivers/edac/mv64x60_edac.c | 3 +-
>> drivers/edac/pasemi_edac.c | 14 ++++++------
>> drivers/edac/ppc4xx_edac.c | 5 ++-
>> drivers/edac/r82600_edac.c | 3 +-
>> drivers/edac/sb_edac.c | 8 +-----
>> drivers/edac/tile_edac.c | 2 +-
>> drivers/edac/x38_edac.c | 4 +-
>> include/linux/edac.h | 8 ++++--
>> 28 files changed, 144 insertions(+), 120 deletions(-)
>>
>> diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
>> index 0be3f29..8804ac8 100644
>> --- a/drivers/edac/amd64_edac.c
>> +++ b/drivers/edac/amd64_edac.c
>> @@ -2126,12 +2126,6 @@ static u32 amd64_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr)
>>
>> nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT);
>>
>> - /*
>> - * If dual channel then double the memory size of single channel.
>> - * Channel count is 1 or 2
>> - */
>> - nr_pages <<= (pvt->channel_count - 1);
>
> This changes DEBUG output from:
>
> EDAC DEBUG: init_csrows: ----CSROW 0 VALID for MC node 0
> EDAC DEBUG: amd64_csrow_nr_pages: (csrow=0) DBAM map index= 8
> EDAC DEBUG: amd64_csrow_nr_pages: nr_pages= 1048576 channel-count = 2
> EDAC amd64: CS0: Registered DDR3 RAM
> EDAC DEBUG: init_csrows: for MC node 0 csrow 0:
> EDAC DEBUG: init_csrows: nr_pages: 1048576
>
> to
>
> EDAC DEBUG: init_csrows: ----CSROW 0 VALID for MC node 0
> EDAC DEBUG: amd64_csrow_nr_pages: (csrow=0) DBAM map index= 8
> EDAC DEBUG: amd64_csrow_nr_pages: nr_pages= 524288 channel-count = 2
>
> which is only half the pages.
>
>> -
>> debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, cs_mode);
>> debugf0(" nr_pages= %u channel-count = %d\n",
>> nr_pages, pvt->channel_count);
Ok. well, we can either multiply nr_pages by channel_count or to let it
clear that this is per channel. I prefer the last option (see the enclosed
patch).
>> @@ -2152,6 +2146,7 @@ static int init_csrows(struct mem_ctl_info *mci)
>> int i, j, empty = 1;
>> enum mem_type mtype;
>> enum edac_type edac_mode;
>> + int nr_pages;
>>
>> amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
>>
>> @@ -2174,14 +2169,14 @@ static int init_csrows(struct mem_ctl_info *mci)
>> i, pvt->mc_node_id);
>>
>> empty = 0;
>> - csrow->nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
>> + nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
>> get_cs_base_and_mask(pvt, i, 0, &base, &mask);
>> /* 8 bytes of resolution */
>>
>> mtype = amd64_determine_memory_type(pvt, i);
>>
>> debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i);
>> - debugf1(" nr_pages: %u\n", csrow->nr_pages);
>> + debugf1(" nr_pages: %u\n", nr_pages);
>>
>> /*
>> * determine whether CHIPKILL or JUST ECC or NO ECC is operating
>> @@ -2195,6 +2190,7 @@ static int init_csrows(struct mem_ctl_info *mci)
>> for (j = 0; j < pvt->channel_count; j++) {
>> csrow->channels[j].dimm->mtype = mtype;
>> csrow->channels[j].dimm->edac_mode = edac_mode;
>> + csrow->channels[j].dimm->nr_pages = nr_pages;
>
> I'm guessing you want to accumulate the nr_pages for all channels here
> and dump it properly?
>
As you've requested to not move the debugf0() to be after the loop, it is
easier to just multiply it at the printk. As an advantage, when the kernel
is compiled without debug, no code will be produced.
IMO, the best way to solve it is with this small patch. If you're ok, I'll
fold it with this one and add your ack.
Regards,
Mauro
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 8804ac8..6d6ec68 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2127,7 +2127,7 @@ static u32 amd64_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr)
nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT);
debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, cs_mode);
- debugf0(" nr_pages= %u channel-count = %d\n",
+ debugf0(" nr_pages/channel= %u channel-count = %d\n",
nr_pages, pvt->channel_count);
return nr_pages;
@@ -2176,7 +2176,7 @@ static int init_csrows(struct mem_ctl_info *mci)
mtype = amd64_determine_memory_type(pvt, i);
debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i);
- debugf1(" nr_pages: %u\n", nr_pages);
+ debugf1(" nr_pages: %u\n", nr_pages * pvt->channel_count);
/*
* determine whether CHIPKILL or JUST ECC or NO ECC is operating
More information about the Linuxppc-dev
mailing list