September 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Sep 1 05:34:06 AEST 2024
Ending: Mon Sep 30 14:49:39 AEST 2024
Messages: 147

• [PATCH] ARM: dts: nuvoton: Fix at24 EEPROM node names   Rob Herring (Arm)
• libmctp / libpldm / pldmtool   Ananth, Rajesh
• libmctp / libpldm / pldmtool   Ananth, Rajesh
• [PATCH] usb: chipidea: npcm: Fix coding style with clarification of data type   Peter Chen
• [PATCH v2] dt-bindings: trivial-devices: add onnn,adt7462   Conor Dooley
• [PATCH v2] dt-bindings: trivial-devices: add onnn,adt7462   Conor Dooley
• TOF elections for 2024H2   Manojkiran Eda
• Wiwynn's CCLA Schedule A update 2024-08-29   Andrew Geissler
• Wistron CCLA Schedule A update 20240823   Andrew Geissler
• CCLA for MiTAC_Tyan needs to be updated   Andrew Geissler
• [PATCH] dt-bindings: hwmon: Add adt7462   Rob Herring
• [PATCH] dt-bindings: hwmon: Add adt7462   Rob Herring
• [PATCH v2] dt-bindings: trivial-devices: add onnn,adt7462   Rob Herring
• [PATCH v6 1/2] dt-bindings: media: convert aspeed-video.txt to dt-schema   Jammy Huang
• [PATCH v6 1/2] dt-bindings: media: convert aspeed-video.txt to dt-schema   Jammy Huang
• [PATCH v3] i2c: aspeed: Update the stop sw state when the bus recovery occurs   Tommy Huang
• [PATCH] ARM: dts: nuvoton: Add UDC nodes   William A. Kennington III
• [PATCH] peci: npcm: Constify struct peci_controller_ops​   Christophe JAILLET
• [PATCH linux dev-6.6] ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED names   Eddie James
• [PATCH linux dev-6.6] ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED names   Eddie James
• Moving on   Andrew Jeffery
• [PATCH v3 2/2] ARM: dts: aspeed: Harma: revise sgpio line name   Andrew Jeffery
• [PATCH linux dev-6.6] ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED names   Andrew Jeffery
• [PATCH linux dev-6.6] hwmon: (pt5161l) Fix invalid temperature reading   Andrew Jeffery
• [linux dev-6.6 v3 3/3] clk: npcm8xx: add clock controller   Andrew Jeffery
• [linux dev-6.6 v4 0/3] Add NPCM8XX clock driver   Andrew Jeffery
• [PATCH 1/2] ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers   Andrew Jeffery
• libmctp / libpldm / pldmtool   Andrew Jeffery
• Improving people's experience with technical engagement in OpenBMC   Andrew Jeffery
• libmctp / libpldm / pldmtool   Andrew Jeffery
• [PATCH] arm: dts: aspeed: Enable PECI and LPC Snoop   Andrew Jeffery
• Improving people's experience with technical engagement in OpenBMC   Andrew Jeffery
• [PATCH v2] ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1   Andrew Jeffery
• [PATCH linux dev-6.6 1/1] rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R   Andrew Jeffery
• [PATCH] ARM: dts: nuvoton: Add UDC nodes   Andrew Jeffery
• [PATCH v6 1/2] dt-bindings: media: convert aspeed-video.txt to dt-schema   Krzysztof Kozlowski
• [PATCH] dt-bindings: hwmon: Add adt7462   Krzysztof Kozlowski
• [PATCH] dt-bindings: hwmon: Add adt7462   Krzysztof Kozlowski
• [PATCH v2] dt-bindings: trivial-devices: add onnn,adt7462   Krzysztof Kozlowski
• [PATCH] usb: chipidea: npcm: Fix coding style with missing space   Andreas Kühn
• [PATCH] usb: chipidea: npcm: Fix coding style with clarification of data type   Andreas Kühn
• [PATCH linux dev-6.6 1/1] rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R   Potin Lai
• [PATCH linux dev-6.6 1/1] rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R   Potin Lai
• TOF elections for 2024H2   Gunnar M
• [PATCH v28 0/3] Introduce Nuvoton Arbel NPCM8XX BMC SoC   Tomer Maimon
• [PATCH v28 1/3] dt-bindings: reset: npcm: add clock properties   Tomer Maimon
• [PATCH v28 2/3] reset: npcm: register npcm8xx clock auxiliary bus device   Tomer Maimon
• [PATCH v28 3/3] clk: npcm8xx: add clock controller   Tomer Maimon
• [PATCH RESEND v27 2/3] reset: npcm: register npcm8xx clock auxiliary bus device   Tomer Maimon
• [PATCH RESEND v27 0/3] Introduce Nuvoton Arbel NPCM8XX BMC SoC   Tomer Maimon
• [PATCH 0/2] Update the device tree for Mt.Mitchell's BMC platform   Chanh Nguyen
• [PATCH 1/2] ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers   Chanh Nguyen
• [PATCH 2/2] ARM: dts: aspeed: mtmitchell: Add gpio line names for io expanders   Chanh Nguyen
• [PATCH] dt-bindings: hwmon: Add adt7462   Chanh Nguyen
• [PATCH] dt-bindings: hwmon: Add adt7462   Chanh Nguyen
• [PATCH] dt-bindings: hwmon: Add adt7462   Chanh Nguyen
• [PATCH] dt-bindings: hwmon: Add adt7462   Chanh Nguyen
• [PATCH] dt-bindings: hwmon: Add adt7462   Chanh Nguyen
• [PATCH v2] dt-bindings: trivial-devices: add onnn,adt7462   Chanh Nguyen
• [PATCH v2] dt-bindings: trivial-devices: add onnn,adt7462   Chanh Nguyen
• TOF elections for 2024H2   Jayanth Othayoth
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Tali Perry
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Tali Perry
• [PATCH v2 2/7] i2c: npcm: correct the read/write operation procedure   Tali Perry
• [PATCH v2 4/7] i2c: npcm: Modify timeout evaluation mechanism   Tali Perry
• [PATCH v2 7/7] i2c: npcm: Enable slave in eob interrupt   Tali Perry
• [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch   Tali Perry
• [PATCH] arm: dts: aspeed: Enable PECI and LPC Snoop   Manojkiran Eda via B4 Relay
• [PATCH v2] ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1   Manojkiran Eda via B4 Relay
• [PATCH] dt-bindings: hwmon: Add adt7462   Guenter Roeck
• [PATCH] dt-bindings: hwmon: Add adt7462   Guenter Roeck
• [PATCH v2] dt-bindings: trivial-devices: add onnn,adt7462   Guenter Roeck
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Andy Shevchenko
• [PATCH v2 5/7] i2c: npcm: Modify the client address assignment   Andy Shevchenko
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Andy Shevchenko
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Andy Shevchenko
• [PATCH v3 6/6] i2c: npcm: Enable slave in eob interrupt   Andy Shevchenko
• [PATCH v3 0/6] i2c: npcm: Bug fixes read/write operation, checkpatch   Andy Shevchenko
• [PATCH v3 0/6] i2c: npcm: Bug fixes read/write operation, checkpatch   Andy Shevchenko
• [PATCH v3 4/6] i2c: npcm: Modify the client address assignment   Andy Shevchenko
• [PATCH v3 5/6] i2c: npcm: use i2c frequency table   Andy Shevchenko
• [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure   Andy Shevchenko
• [PATCH v4 4/6] i2c: npcm: Modify the client address assignment   Andy Shevchenko
• [PATCH v4 4/6] i2c: npcm: Modify the client address assignment   Andy Shevchenko
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Andi Shyti
• [PATCH v2 2/7] i2c: npcm: correct the read/write operation procedure   Andi Shyti
• [PATCH v2 3/7] i2c: npcm: use a software flag to indicate a BER condition   Andi Shyti
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Andi Shyti
• [PATCH v2 4/7] i2c: npcm: Modify timeout evaluation mechanism   Andi Shyti
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Andi Shyti
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Andi Shyti
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Andi Shyti
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Andi Shyti
• [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch   Andi Shyti
• [PATCH v3] i2c: aspeed: Update the stop sw state when the bus recovery occurs   Andi Shyti
• [PATCH v3] i2c: aspeed: Update the stop sw state when the bus recovery occurs   Andi Shyti
• [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure   Andi Shyti
• [PATCH v4 2/6] i2c: npcm: use a software flag to indicate a BER condition   Andi Shyti
• [PATCH v4 3/6] i2c: npcm: Modify timeout evaluation mechanism   Andi Shyti
• Help with "ipmitool chassis power on"   Gundu Baba Sikandar
• Help with "ipmitool chassis power on"   Gundu Baba Sikandar
• No CI executed in gerrit   Chiang.Brian 江泳緻 TAO
• TOF elections for 2024H2   Ed Tanous
• [PATCH v2 5/7] i2c: npcm: Modify the client address assignment   Tyrone Ting
• [PATCH v2 5/7] i2c: npcm: Modify the client address assignment   Tyrone Ting
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Tyrone Ting
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Tyrone Ting
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length   Tyrone Ting
• [PATCH v2 4/7] i2c: npcm: Modify timeout evaluation mechanism   Tyrone Ting
• [PATCH v2 2/7] i2c: npcm: correct the read/write operation procedure   Tyrone Ting
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Tyrone Ting
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table   Tyrone Ting
• [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch   Tyrone Ting
• [PATCH v3 6/6] i2c: npcm: Enable slave in eob interrupt   Tyrone Ting
• [PATCH v3 0/6] i2c: npcm: Bug fixes read/write operation, checkpatch   Tyrone Ting
• [PATCH v3 0/6] i2c: npcm: Bug fixes read/write operation, checkpatch   Tyrone Ting
• [PATCH v3 4/6] i2c: npcm: Modify the client address assignment   Tyrone Ting
• [PATCH v3 5/6] i2c: npcm: use i2c frequency table   Tyrone Ting
• [PATCH v3 6/6] i2c: npcm: Enable slave in eob interrupt   Tyrone Ting
• [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure   Tyrone Ting
• [PATCH v4 4/6] i2c: npcm: Modify the client address assignment   Tyrone Ting
• [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure   Tyrone Ting
• [PATCH v4 2/6] i2c: npcm: use a software flag to indicate a BER condition   Tyrone Ting
• [PATCH v4 3/6] i2c: npcm: Modify timeout evaluation mechanism   Tyrone Ting
• Improving people's experience with technical engagement in OpenBMC   Johannes Truschnigg
• No CI executed in gerrit   Patrick Williams
• TOF elections for 2024H2   Patrick Williams
• Help with "ipmitool chassis power on"   Patrick Williams
• Re: [PATCH] peci: npcm: Constify struct peci_controller_ops​   Winiarska, Iwona
• [PATCH v1] reset: npcm: convert comma to semicolon   Philipp Zabel
• [PATCH RESEND v27 2/3] reset: npcm: register npcm8xx clock auxiliary bus device   Philipp Zabel
• [PATCH v1] reset: npcm: convert comma to semicolon   Yan Zhen
• [PATCH v3 0/6] i2c: npcm: Bug fixes read/write operation, checkpatch   warp5tw at gmail.com
• [PATCH v3 1/6] i2c: npcm: correct the read/write operation procedure   warp5tw at gmail.com
• [PATCH v3 2/6] i2c: npcm: use a software flag to indicate a BER condition   warp5tw at gmail.com
• [PATCH v3 3/6] i2c: npcm: Modify timeout evaluation mechanism   warp5tw at gmail.com
• [PATCH v3 4/6] i2c: npcm: Modify the client address assignment   warp5tw at gmail.com
• [PATCH v3 5/6] i2c: npcm: use i2c frequency table   warp5tw at gmail.com
• [PATCH v4 0/6] i2c: npcm: read/write operation, checkpatch   warp5tw at gmail.com
• [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure   warp5tw at gmail.com
• [PATCH v4 2/6] i2c: npcm: use a software flag to indicate a BER condition   warp5tw at gmail.com
• [PATCH v4 3/6] i2c: npcm: Modify timeout evaluation mechanism   warp5tw at gmail.com
• [PATCH v4 4/6] i2c: npcm: Modify the client address assignment   warp5tw at gmail.com
• [PATCH v4 5/6] i2c: npcm: use i2c frequency table   warp5tw at gmail.com
• [PATCH v4 6/6] i2c: npcm: Enable slave in eob interrupt   warp5tw at gmail.com
• CCLA for MiTAC_Tyan needs to be updated   hancock.chang at mic.com.tw
• CLA managers and member list update for MiTAC's CCLA   hancock.chang at mic.com.tw

Last message date: Mon Sep 30 14:49:39 AEST 2024
Archived on: Mon Sep 30 14:49:44 AEST 2024

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...