[PATCH v2 6/7] i2c: npcm: use i2c frequency table
Tyrone Ting
warp5tw at gmail.com
Tue Sep 10 11:11:01 AEST 2024
Hi Andy:
Thank you for your comments.
Andi Shyti <andi.shyti at kernel.org> 於 2024年9月9日 週一 下午8:57寫道:
>
> On Mon, Sep 09, 2024 at 09:56:25AM GMT, Tyrone Ting wrote:
> > Hi Andi:
> >
> > Thank you for your review.
> >
> > Andi Shyti <andi.shyti at kernel.org> 於 2024年9月6日 週五 上午5:43寫道:
> > >
> > > Hi,
> > >
> > > On Fri, Aug 30, 2024 at 11:46:39AM GMT, Tyrone Ting wrote:
> > > > Modify i2c frequency from table parameters
> > > > for NPCM i2c modules.
> > > >
> > > > Supported frequencies are:
> > > >
> > > > 1. 100KHz
> > > > 2. 400KHz
> > > > 3. 1MHz
> > >
> > > I agree with Andy, please add a good explanation for this change.
> > >
> > > > Signed-off-by: Tyrone Ting <kfting at nuvoton.com>
> > > > ---
> > > > drivers/i2c/busses/i2c-npcm7xx.c | 230 +++++++++++++++++++------------
> > > > 1 file changed, 144 insertions(+), 86 deletions(-)
> > > >
> > > > diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
> > > > index 67d156ed29b9..cac4ea0b69b8 100644
> > > > --- a/drivers/i2c/busses/i2c-npcm7xx.c
> > > > +++ b/drivers/i2c/busses/i2c-npcm7xx.c
> > > > @@ -263,6 +263,121 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
> > > > #define I2C_FREQ_MIN_HZ 10000
> > > > #define I2C_FREQ_MAX_HZ I2C_MAX_FAST_MODE_PLUS_FREQ
> > > >
> > > > +struct SMB_TIMING_T {
> > >
> > > Please run checkpatch.pl before sending the patches.
> > I did run the checkpatch.pl against this patch.
> > Here is the log from the checkpatch.pl:
> > -------------------------------------------------------------
> > ./patch_i2c_v2/v2-0006-i2c-npcm-use-i2c-frequency-table.patch
> > -------------------------------------------------------------
> > total: 0 errors, 0 warnings, 265 lines checked
> >
> > ./patch_i2c_v2/v2-0006-i2c-npcm-use-i2c-frequency-table.patch has no
> > obvious style problems and is ready for submission.
>
> mmhhh... I thought checkpatch hated capital letter declarations.
>
> Please, then, use only lower character names for declarations.
>
I'll use lower character names for declarations in next patch set.
> Thanks,
> Andi
Thank you.
Regards,
Tyrone
More information about the openbmc
mailing list