[PATCH v2 6/7] i2c: npcm: use i2c frequency table

[Andi Shyti]

Hi,

On Fri, Aug 30, 2024 at 11:46:39AM GMT, Tyrone Ting wrote:
> Modify i2c frequency from table parameters
> for NPCM i2c modules.
> 
> Supported frequencies are:
> 
> 1. 100KHz
> 2. 400KHz
> 3. 1MHz

I agree with Andy, please add a good explanation for this change.

> Signed-off-by: Tyrone Ting <kfting at nuvoton.com>
> ---
>  drivers/i2c/busses/i2c-npcm7xx.c | 230 +++++++++++++++++++------------
>  1 file changed, 144 insertions(+), 86 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
> index 67d156ed29b9..cac4ea0b69b8 100644
> --- a/drivers/i2c/busses/i2c-npcm7xx.c
> +++ b/drivers/i2c/busses/i2c-npcm7xx.c
> @@ -263,6 +263,121 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
>  #define I2C_FREQ_MIN_HZ			10000
>  #define I2C_FREQ_MAX_HZ			I2C_MAX_FAST_MODE_PLUS_FREQ
>  
> +struct SMB_TIMING_T {

Please run checkpatch.pl before sending the patches.

Thanks,
Andi