[PATCH v2 3/7] i2c: npcm: use a software flag to indicate a BER condition

[Andi Shyti]

Hi,

On Fri, Aug 30, 2024 at 11:46:36AM GMT, Tyrone Ting wrote:
> If not clearing the BB (bus busy) condition in the BER (bus error)
> interrupt, the driver causes a timeout and hence the i2c core
> doesn't do the i2c transfer retry but returns the driver's return
> value to the upper layer instead.
> 
> Clear the BB condition in the BER interrupt and a software flag is
> used. The driver does an i2c recovery without causing the timeout
> if the flag is set.
> 
> Fixes: 48acf8292280 ("i2c: Remove redundant comparison in npcm_i2c_reg_slave")
> Signed-off-by: Tyrone Ting <kfting at nuvoton.com>

Can I have an ack from the supporters of the ARM/NUVOTON NPCM
ARCHITECTURE here?

Thanks,
Andi